Q45BW22FVQ1 [BANNER]

Q45BW22 Series Sensors;


型号：	Q45BW22FVQ1
厂家：	Banner Engineering
描述：	Q45BW22 Series Sensors
文件：	总11页 (文件大小：627K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Q45BW22 Series Sensors

Datasheet

90 V ac to 250 V ac photoelectric sensors with protected solid-state relay output

•

Advanced one-piece photoelectric sensors with outstanding optical performance and

extremely rugged design

•

90 V ac to 250 V ac

Protected solid-state relay output; 300 mA max. load at up to 250 V ac

Multiple sensing modes include: opposed, diffuse, retroreflective and convergent, plus

glass and plastic fiber optic models

•

Selectable light/dark operate

Versatile plug-in modules available for output timing logic and/or signal strength display

Highly visible Power, Signal (AID System ), and Output indicator LEDs

Choice of prewired 2 m (6.5 ft) or 9 m (30 ft) unterminated cable, plus Mini-style or

Micro-style quick-disconnect fittings

™

•

Versatile mounting options

Designed to withstand 1200 psi washdown; exceeds its NEMA 6P and IEC IP67 rating

WARNING: Not To Be Used for Personnel Protection

Never use this device as a sensing device for personnel protection. Doing so could lead to

serious injury or death. This device does not include the self-checking redundant circuitry necessary

to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an

energized or de-energized sensor output condition.

Models

To order the 9 m (30 ft) cable model, add the suffix "W/30" to the cabled model number. For example Q452E W/30.

A model with a QD connector requires a mating cable.

Opposed-Mode Emitter (E) and Receiver (R) Models

Because of their extremely high excess gain, these opposed-mode sensors are an excellent option

for sensing in contaminated or dirty areas, and are also the best choice for long-range sensing.

OPPOSED

Infrared, 880 nm

Models

Q452E Emitter

Range

Cable

Supply Voltage

Output Type

2-wire 2m (6.5 ft)

3-wire 2m (6.5 ft)

3-Pin Mini-style QD

4-Pin Micro-style QD

3-Pin Mini-style QD

4-Pin Micro-style QD

Q45BW22R Receiver

Q452EQ Emitter

60 m (200 ft)

90 V ac to 250V ac

SPST Solidstate Relay

Q452EQ1 Emitter

Q45BW22RQ Receiver

Q45BW22RQ1 Receiver

U.S. Patent no. 4356393

Original Document

37209 Rev. F

2 November 2016

37209

Q45BW22 Series Sensors

Retroreflective-Mode Models

The visible red sensing beam of these sensors makes them very easy to align.

Model Q45BW22LP polarizes the emitted light and filters out unwanted reflections,

making sensing possible in applications otherwise considered unsuited to

retroreflective sensing. Performance is specified using the model BRT-3 3-inch

reflector (go to www.bannerengineering.com for more information).

RETRO

POLAR RETRO

Visible red, 680 nm

Non-Polarized Models

Models

Q45BW22LV

Q45BW22LVQ

Q45BW22LVQ1

Range

Cable

Supply Voltage

Output Type

3-wire 2 m (6.5 ft)

3-Pin Mini-style QD

4-Pin Micro-style QD

0.08 to 9 m

(3 in to 30 ft)

90 V ac to 250 V ac

SPST Solid-state Relay

Polarized Models

Cable

Models

Q45BW22LP

Q45BW22LPQ

Q45BW22LPQ1

Range

Supply Voltage

Output Type

3-wire 2 m (6.5 ft)

3-Pin Mini-style QD

4-Pin Micro-style QD

0.15 to 6 m

(6 in to 20 in)

90 V ac to 250 V ac

SPST Solid-state Relay

Diffuse-Mode Models

These diffuse-mode models detect objects by sensing the reflection of their own emitted

light. Ideal for use when the reflectivity and profile of the object to be sensed are sufficient

to return a large percentage of emitted light back to the sensor. Model Q45BW22DX is the

first choice for diffuse-mode applications when there are no background objects to falsely

return light.

DIFFUSE

Infrared, 880 nm

Short Range

Model

Range

Cable

Supply Voltage

Output Type

Q45BW22D

Q45BW22DQ

Q45BW22DQ1

3-wire 2 m (6.5 ft)

3-Pin Mini-style QD

4-Pin Micro-style QD

45 cm (18 in)

SPST Solid-state Relay

90 V ac to 250 V ac

Long Range

Cable

Model

Range

Supply Voltage

Output Type

Q45BW22DL

Q45BW22DLQ

Q45BW22DLQ1

3-wire 2 m (6.5 ft)

3-Pin Mini-style QD

4-Pin Micro-style QD

1. 8 m (6 ft)

SPST Solid-state Relay

90 V ac to 250 V ac

High Power

Cable

Model

Range

Supply Voltage

Output Type

Q45BW22DX

Q45BW22DXQ

Q45BW22DXQ1

3-wire 2 m (6.5 ft)

3-Pin Mini-style QD

4-Pin Micro-style QD

3 m (10 ft)

SPST Solid-state Relay

90 V ac to 250 V ac

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 37209 Rev. F

Q45BW22 Series Sensors

Convergent-Mode Models

These sensors are ideal for reflective sensing of very small parts or profiles, and can accurately

sense the position of parts approaching from the side. Ignores all but highly reflective objects

that are outside of the sensing range.

CONVERGENT

Visible red, 680 nm

Models

Q45BW22CV

Focus

Cable

Supply Voltage

Output Type

3-wire 2 m (6.5 ft)

3-Pin Mini-style QD

4-Pin Micro-style QD

3-wire 2 m (6.5 ft)

3-Pin Mini-style QD

4-Pin Micro-style QD

38 mm (1.5 in)

Q45BW22CVQ

Q45BW22CVQ1

Q45BW22CV4

Q45BW22CV4Q

Q45BW22CV4Q1

90 V ac to 250 V ac

SPST Solid-state Relay

Spot Size at Focus:

1.3 mm (0.05 in)

100 mm (4 in)

90 V ac to 250 V ac

SPST Solid-state Relay

Spot Size at Focus:

1.5 mm (0.06 in)

Glass Fiber-Optic Models

These models are an excellent choice for glass fiber optic applications

where faster sensor response is not important. Their high excess gain

means that opposed individual fibers can operate reliably in many very

hostile environments. Also, special miniature bifurcated fiber optic

assemblies with bundle sizes as small as .5 mm (.020 in) dia. may be

used successfully for diffuse-mode sensing when using sensor model

Q45BW22F(Q). For more information on compatible glass fiber optics,

go to www.bannerengineering.com.

GLASS FIBER

Infrared, 880 nm and Visible red, 650 nm

Infrared, 880 nm

Models

Q45BW22F

Range

Cable

Supply Voltage

Output Type

3-wire 2 m (6.5 ft)

3-Pin Mini-style QD

4-Pin Micro-style QD

Range varies by

sensing mode and

fiber optics used

Q45BW22FQ

90 V ac to 250 V ac

SPST Solid-state Relay

Q45BW22FQ1

Visible red, 650 nm

Cable

Models

Q45BW22FV

Range

Supply Voltage

Output Type

3-wire 2 m (6.5 ft)

3-Pin Mini-style QD

4-Pin Micro-style QD

Range varies by

sensing mode and

fiber optics used

Q45BW22FVQ

Q45BW22FVQ1

90 V ac to 250 V ac

SPST Solid-state Relay

Plastic Fiber-Optic Models

Lower in cost than glass fiber optics, plastic fiber optics are ideal for use in situations where

environmental conditions allow (for example, low levels of acids, alkalis, and solvents). Most are

easily cut to length in the field, and are available in a variety of sensing end styles. For more

information on compatible plastic fiber optics, go to www.bannerengineering.com.

PLASTIC FIBER

Visible red, 660 nm

Model

Q45BW22FP

Range

Cable

Supply Voltage

Output Type

3-wire 2 m (6.5 ft)

3-Pin Mini-style QD

4-Pin Micro-style QD

Range varies by

sensing mode and

fiber optics used

Q45BW22FPQ

Q45BW22FPQ1

90 V ac to 250 V ac

SPST Solid-state Relay

P/N 37209 Rev. F

www.bannerengineering.com - Tel: +1-763-544-3164

Q45BW22 Series Sensors

Overview

Status indicator LEDs for power, signal, and output are clearly visible beneath a raised dome in the sensor’s transparent o-

ring-sealed polycarbonate cover. Also located beneath the sensor’s o-ring-sealed cover are controls for light/dark operate

selection and the sensitivity adjustment.

•

The power indicator (green) lights when power is applied to the sensor.

The signal indicator (red) lights when the sensor sees its modulated light source and pulses at a rate proportional

™

to the strength of the received light signal; this is the AID Alignment Indicating Device .

•

The output indicator (amber) lights when the sensor’s output is conducting. This indicator is especially useful when

a timing logic module is used and signal and output conditions are not concurrent.

1. LEDs

•

Green LED: Power on indicator

Red LED: Signal indicator

Amber LED: Output status indicator

2. Optional LED signal strength display

3. Optional timing adjustment

4. Optional timing adjustment

5. Light/dark operate switch

Wiring Diagram

Attached Cable

Emitter with Attached Cable

90-250V ac

–

90–250 V ac

Load

Key

1 = Brown

Quick-Disconnect 3-Pin Mini-Style

(model suffix Q)

Emitter with Quick-Disconnect 3-Pin

Mini-Style (model suffix Q)

3 = Blue

4 = Black

–

90–250 V ac

90-250V ac

Quick-Disconnect 4-Pin Micro-Style

(model suffix Q1)

Emitter with Quick-Disconnect 4-Pin

Micro-Style (model suffix Q1)

Key

1 = Red and black

2 = Red and white

3 = Red

90-250V ac

Load

4 = Green

US patent no. 4356393

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 37209 Rev. F

Q45BW22 Series Sensors

Specifications

Supply Voltage and Current

Repeatability

90 V ac to 250V ac (50 to 60 Hz)

Average current: 20 mA

Peak current: 500 mA at 120 V ac, 750 mA at 250 V ac

Opposed mode: 0.25 milliseconds

All other sensing modes: 0.5 milliseconds

Response time and repeatability specifications are independent of

signal strength.

Supply Protection Circuitry

Adjustments

Protected against transient voltages

Located under the sensor’s transparent cover: Light/Dark Operate

select switch; and multi-turn Sensitivity control (allows precise

sensitivity setting—turn clockwise to increase gain). Optional logic and

logic/display modules have adjustable timing functions.

Output Configuration

Short circuit/overload protected FET solid-state relay

Output Rating

Continuous current: 300 mA max. to 50 °C (derate to 200 mA at

70 °C, 5 mA/°C)

Inrush current: 3 A maximum for 100 milliseconds, 5 A maximum for 1

millisecond

Off-state leakage current: <100 microamps

Saturation voltage: <3 V at 200 mA

Indicators

Indicator LEDs are clearly visible beneath a raised transparent

polycarbonate dome on top of the sensor.

Power (green) LED: Lights whenever 90 V ac to 250 V ac power is

applied, and flashes to indicate output overload or output short circuit

™

Signal (red) AID System LED: Lights whenever the sensor sees its

Output Protection Circuitry

modulated light source, and pulses at a rate proportional to the

strength of the received light signal

Load (amber) LED: Lights whenever the output relay is energized

Optional 7-element LED: Signal strength display module

Manually-resettable output latch-out trips in the event of an output

overload or short circuit condition. The green Power LED flashes to

indicate the latch-out. To reset the output, remove power to the sensor

and load for 5 seconds, then restore power.

Construction

Output Response Time

Molded reinforced thermoplastic polyester housing, o-ring-sealed

transparent polycarbonate cover, molded acrylic lenses, and stainless

steel hardware. Q45s are designed to withstand 1200 psi washdown.

The base of cabled models has a 1/2-in NPS integral internal conduit

thread.

Opposed mode: 2 milliseconds ON, 1 millisecond OFF

All other sensing modes: 2 milliseconds ON/OFF

NOTE: 100 millisecond delay on power-up.

Output is non-conducting during this time.

Environmental Rating

NEMA 6P, IEC IP67

Required Overcurrent Protection

Connections

WARNING: Electrical connections must be

made by qualified personnel in accordance

with local and national electrical codes and

regulations.

PVC-jacketed 2 m (6.5 ft) or 9 m (30 ft) cables, or 3-pin Mini-style (“Q”

suffix models) or 4-pin Micro-style (“Q1” suffix models) quick-

disconnect (QD) fittings are available. QD cables are ordered

separately.

Operating Conditions

Overcurrent protection is required to be provided by end product

application per the supplied table.

Overcurrent protection may be provided with external fusing or via

Current Limiting, Class 2 Power Supply.

Temperature: −40 °C to +70 °C (−40 °F to +158 °F)

90% at +50 °C maximum relative humidity (non-condensing)

Application Notes

Supply wiring leads < 24 AWG shall not be spliced.

For additional product support, go to www.bannerengineering.com.

Optional output timing modules are available.

Certifications

Supply Wiring (AWG)

Required Overcurrent Protection (Amps)

5.0

3.0

2.0

1.0

0.8

0.5

P/N 37209 Rev. F

www.bannerengineering.com - Tel: +1-763-544-3164

Q45BW22 Series Sensors

Dimensions

Opposed, Retro, and Diffuse Sensing Modes (Model Suffix E, R, D, DL, DX, LP, and LV)

Cabled Models

Mini-Style Quick-Disconnect

Models

Micro-Style Quick Disconnect

Models

54.1 mm*

(2.13")

*57.9 mm (2.28") for LP models

Lens Centerline

44.5 mm

(1.75")

50.8 mm

(2.00")

69.0 mm

(2.72")

6.4 mm (0.25")

87.6 mm

(3.45")

4.5 mm (#10) Screw

Clearance (2)

7.1 mm

(0.28")

30.0 mm

(1.18")

Internal Thread

(1/2–14NPSM)

ø 6.1 (0.24")

External Thread

M30 X 1.5

2m (6.5') Cable

External thread (M30 x 1.5)

hex nut supplied

Micro-style

15 mm (0.6")

14 mm (0.6")

QD Connector

Mini-style QD Connector

Convergent Sensor Models

(CV and CV4)

Glass Fiber Optic Models

(F and FV)

Plastic Fiber Optic Models

(FP)

60.5 mm

(2.38")

61.7 mm

(2.43")

59.9 mm

(2.36")

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 37209 Rev. F

Q45BW22 Series Sensors

Performance Curves

Opposed

Excess Gain

Beam Pattern

Effective Beam: 13 mm

1000

Q45E/R

Opposed Mode

Q45E/R

Opposed Mode

1.5 m

60 in

1.0 m

0.5 m

40 in

20 in

100

0.5 m

1.0 m

1.5 m

20 in

40 in

60 in

12 m

40 ft

24 m

80 ft

36 m

120 ft

48 m

160 ft

60 m

200 ft

0.1 m

0.33 ft

1.0 m

3.3 ft

10 m

33 ft

100 m

330 ft

DISTANCE

Retroreflective Non-Polarized

Excess Gain Beam Pattern

Retroreflective Polarized

Excess Gain Beam Pattern

1000

Q45LP

Q45LV

Retroreflective Mode

Q45LP

Retroreflective

Mode

75 mm

3.0 in

75 mm

3.0 in

Retroreflective Mode

100

50 mm

25 mm

2.0 in

1.0 in

50 mm

25 mm

2.0 in

1.0 in

With BRT-3 Reflector

25 mm

50 mm

75 mm

1.0 in

2.0 in

3.0 in

25 mm

50 mm

75 mm

1.0 in

2.0 in

3.0 in

With BRT-3 Reflector

1.5 m

5 ft

3 m

10 ft

4.5 m

15 ft

6 m

7.5 m

25 ft

.01 m

.033 ft

.10 m

.33 ft

1.0 m

3.3 ft

10 m

33 ft

3 m

10 ft

6 m

20 ft

9 m

30 ft

12 m

40 ft

15 m

50 ft

.01 m

.033 ft

.10 m

.33 ft

1.0 m

3.3 ft

10 m

33 ft

20 ft

DISTANCE

Diffuse-mode performance curves are based on a 90% reflectance white test card.

Diffuse Short Range

Diffuse Long Range

Excess Gain

Beam Pattern

Excess Gain

Beam Pattern

1000

100

Q45DL

Q45D

Q45DL

Diffuse Mode

15 mm

0.6 in

75 mm

3.0 in

Diffuse Mode

Q45D

Diffuse Mode

100

10 mm

5 mm

0.4 in

0.2 in

50 mm

25 mm

2.0 in

1.0 in

5 mm

10 mm

15 mm

0.2 in

0.4 in

0.6 in

25 mm

50 mm

75 mm

1.0 in

2.0 in

3.0 in

100 mm 200mm 300 mm 400 mm 500 mm

4.0 in 8.0 in 12.0 in 16.0 in 20.0 in

0.6 m

2 ft

1.2 m

4 ft

1.8 m

6 ft

2.4 m

8 ft

3.0 m

10 ft

1.0 mm

0.04 in

10 mm

0.4 in

100 mm

4.0 in

1000 mm

40 in

.01 m

.033 ft

.10 m

.33 ft

1.0 m

3.3 ft

10 m

33 ft

DISTANCE

P/N 37209 Rev. F

www.bannerengineering.com - Tel: +1-763-544-3164

Q45BW22 Series Sensors

Diffuse High Power

Excess Gain

Beam Pattern

1000

100

Q45DX

Diffuse Mode

75 mm

3.0 in

50 mm

25 mm

2.0 in

1.0 in

25 mm

50 mm

75 mm

1.0 in

2.0 in

3.0 in

0.6 m

2 ft

1.2 m

4 ft

1.8 m

6 ft

2.4 m

8 ft

3.0 m

10 ft

0.01 m

0.033 ft

0.1 m

0.33 ft

1.0 m

3.3 ft

10 m

33 ft

DISTANCE

Convergent mode performance curves are based on a 90% reflectance white test card.

Convergent (CV and CVQ Models)

Excess Gain Beam Pattern

Convergent (CV4 and CV4Q Models)

Excess Gain

Beam Pattern

1000

100

1000

100

Q45CV

Q45CV4

Convergent Mode

Q45CV4

Convergent Mode

Q45CV

3.8 mm

0.15 in

3.8 mm

0.15 in

Convergent Mode

2.5 mm

1.2 mm

0.10 in

0.05 in

2.5 mm

1.2 mm

0.10 in

0.05 in

1.2 mm

2.5 mm

3.8 mm

0.05 in

0.10 in

0.15 in

1.2 mm

2.5 mm

3.8 mm

0.05 in

0.10 in

0.15 in

38 mm

1.5 in

75 mm 113 mm 150 mm 190 mm

3.0 in 4.5 in 6.0 in 7.5 in

38 mm

1.5 in

75 mm 113 mm 150 mm 190 mm

3.0 in 4.5 in 6.0 in 7.5 in

1 mm

.04 in

10 mm

.4 in

100 mm

4 in

1000 mm

40 in

1 mm

.04 in

10 mm

.4 in

100 mm

4 in

1000 mm

40 in

DISTANCE

Glass fiber optic diffuse mode performance curves are based on a 90% reflectance white test card.

Glass Fiber Optic, Infrared (Opposed Mode)

Excess Gain Beam Pattern

Glass Fiber Optic, Infrared (Diffuse Mode)

Excess Gain Beam Pattern

1000

100

1000

100

Q45F

Diffuse Mode

Opposed Mode

Q45F

Opposed Mode

Q45F

Diffuse Mode

150 mm

6.0 in

3.8 mm

0.15 in

100 mm

50 mm

4.0 in

2.0 in

2.5 mm

1.3 mm

0.10 in

0.05 in

IT23S Fibers

BT13S Fiber

IT23S Fibers

IT13S Fibers

BT23S Fiber

50 mm

100 mm

150 mm

2.0 in

4.0 in

6.0 in

1.3 mm

2.5 mm

3.8 mm

0.05 in

0.10 in

0.15 in

IT13S Fibers

BT13S Fiber

0.4 m

15 in

0.8 m

30 in

1.2 m

45 in

1.6 m

60 in

2.0 m

75 in

25 mm

1 in

50 mm

2 in

75 mm 100 mm 125 mm

3 in 4 in 5 in

0.01 m

0.03 ft

0.1 m

0.33 ft

1.0 m

3.3 ft

10 m

33 ft

1 mm

0.04 in

10 mm

0.4 in

100 mm

4.0 in

1000 mm

40 in

DISTANCE

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 37209 Rev. F

Q45BW22 Series Sensors

Glass Fiber Optic, Visible Red (Opposed Mode)

Glass Fiber Optic, Visible Red (Diffuse Mode)

Excess Gain Beam Pattern

Excess Gain

Beam Pattern

1000

100

1000

100

Q45FV

Diffuse Mode

Q45FV

Opposed Mode

Q45FV

Diffuse Mode

30 mm

1.2 in

Opposed Mode

3.0 mm

0.12 in

20 mm

10 mm

0.8 in

0.4 in

2.0 mm

1.0 mm

0.08 in

0.04 in

IT23S Fibers

BT13S Fiber

10 mm

20 mm

30 mm

0.4 in

0.8 in

1.2 in

IT13S Fibers

1.0 mm

2.0 mm

3.0 mm

0.04 in

0.08 in

0.12 in

BT13S

Fiber

IT13S Fibers

BT23S Fiber

100 mm 150 mm 200 mm 250 mm 300 mm

4 in 6 in 8 in 10 in 12 in

1 mm

0.04 in

10 mm

0.4 in

100 mm

4.0 in

1000 mm

40 in

5 mm

0.2 in

10 mm

0.4 in

15 mm

0.6 in

20 mm 25 mm

0.8 in 1.0 in

1.0 mm

0.04 in

10 mm

0.4 in

100 mm

4 in

1000 mm

40 in

DISTANCE

Plastic fiber optic Diffuse mode performance curves are based on a 90% reflectance white test card.

Plastic Fiber Optic (Opposed Mode) Plastic Fiber Optic (Diffuse Mode)

Excess Gain

Beam Pattern

Excess Gain

Beam Pattern

1000

100

1000

100

Q45FP

45 mm

1.8 in

Opposed Mode

Q45FP

18 mm

0.75 in

Diffuse Mode

PBT46U Fiber

Opposed Mode

PIT46U Fibers

Diffuse Mode

30 mm

15 mm

1.2 in

0.6 in

12 mm

6 mm

0.50 in

0.25 in

PBT46U Fiber

PIT46U Fibers

PIT26U Fibers

15 mm

30 mm

45 mm

0.6 in

1.2 in

1.8 in

6 mm

12 mm

18 mm

0.25 in

0.50 in

0.75 in

PIT26U Fibers

PBT26U Fiber

10 mm

0.4 in

20 mm

0.8 in

30 mm

1.2 in

40 mm 50 mm

1.6 in 2.0 in

25 mm

1.0 in

50 mm

2.0 in

75 mm 100 mm 125 mm

3.0 in 4.0 in 5.0 in

1 mm

0.04 in

10 mm

0.4 in

100 mm

4.0 in

1000 mm

40 in

0.1 mm

0.004 in

1 mm

0.04 in

10 mm

0.4 in

100 mm

4 in

DISTANCE

Accessories

Cordsets

3-Pin Mini-Style Cordsets

Model

Length

Style

Dimensions

Pinout (Female)

MBCC-306

1.83 m (6.5 ft)

3.66 m (12 ft)

52 Typ.

7/8-16UN-2B

ø 25.5

MBCC-312

Straight

1 = Black

2 = Brown

3 = Blue

MBCC-330

9.14 m (30 ft)

4-Pin Micro-Style Cordsets

Model

Length

Style

Dimensions

Pinout (Female)

MQAC-406

1.83 m (6 ft)

MQAC-415

4.57 m (15 ft)

9.14 m (30 ft)

42 Typ.

Straight

1/2-20 UNF-28

1 = Red/Black

2 = Red/White

3 = Red

MQAC-430

ø 14.5

4 = Green

P/N 37209 Rev. F

www.bannerengineering.com - Tel: +1-763-544-3164

Q45BW22 Series Sensors

Retroreflective Targets

Banner offers a wide selection of high-quality retroreflective targets. See

www.bannerengineering.com for complete information.

NOTE: Polarized sensors require corner cube type

retroreflective targets. Non-polarized sensors may use

any retroreflective target.

Brackets

SMB30C

SMB30MM

•

30 mm split clamp, black

PBT bracket

•

12-ga. stainless steel bracket

with curved mounting slots

for versatile orientation

•

Stainless steel mounting

hardware included

•

Clearance for M6 (¼ in)

hardware

Mounting hole for 30 mm

sensor

Mounting hole for 30 mm

sensor

Hole center spacing: A=ø 45

Hole size: B=ø 27.2

Hole center spacing: A = 51, A to B = 25.4

Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1

SMB30SC

•

Swivel bracket with 30 mm

mounting hole for sensor

Black reinforced

thermoplastic polyester

Stainless steel mounting and

swivel locking hardware

included

Hole center spacing: A=ø 50.8

Hole size: A=ø 7.0, B=ø 30.0

Output Timing Logic and Signal Strength Display Modules

Q45 sensors easily accept the addition of output timing logic and signal strength display functions. Display modules have a

™

seven-element display that gives a more precise indication of excess gain than does the AID system LED that is standard

on Q45 sensors. The modules listed below may be used with all Q45VR2 sensors. Refer to the module's datasheet for more

information.

Models

45LM58

45LM58D

45LMD

Logic and/or Display Function

Programmable output timing logic

Programmable output timing logic plus signal strength display

Signal strength display only (no timing function)

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 37209 Rev. F

Q45BW22 Series Sensors

Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.

will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty

period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,

ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE

OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE

LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL,

CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER

ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product

previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection

applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval

by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product

specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most

recent version of any documentation, refer to: www.bannerengineering.com.

Q45BW22FVQ1 [BANNER]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E