Q45VR3DQ [BANNER]
Q45VR3 Series Sensors;型号: | Q45VR3DQ |
厂家: | Banner Engineering |
描述: | Q45VR3 Series Sensors |
文件: | 总11页 (文件大小:414K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Q45VR3 Series Sensors
Datasheet
Universal Voltage Photoelectric Sensors with Electromechanical Relay Output
•
Advanced one-piece photoelectric sensors with outstanding opꢀcal performance and
extremely rugged design
•
•
Universal supply voltage: 12 to 250 V dc or 24 to 250 V ac
Electromechanical relay for economical, high-capacity switching and immunity to electrical
noise
•
Mulꢀple sensing modes available: opposed, diffuse, retroreꢁecꢀve, and convergent, plus glass
and plasꢀc fiber opꢀc models
•
•
•
•
Selectable light/dark operate
Versaꢀle plug-in modules available for output ꢀming logic and/or signal strength display
1
™
Highly visible Power, Signal (AID System ), and Output indicator LEDs
Choice of prewired 2 m (6.5 ꢂ) or 9 m (30 ꢂ) unterminated cable or Mini-style quick-
disconnect fiꢃng
•
•
Versaꢀle mounꢀng opꢀons
Designed to withstand 1200 psi washdown; exceeds its NEMA 6P and IEC IP67 raꢀng
WARNING: Not To Be Used for Personnel Protecꢀon
Never use this device as a sensing device for personnel protecꢀon. Doing so could lead to serious injury or
death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel
safety applicaꢀons. A sensor failure or malfuncꢀon can cause either an energized or de-energized sensor output
condiꢀon.
Models
To order the 9 m (30 ꢂ) cable models, add the suffix "W/30" to the cabled model number. For example: Q453E W/30.
Models with a quick disconnect (QD) connector require a maꢀng cable.
Opposed-Mode Emiꢁer (E) and Receiver (R) Models
Because of their extremely high excess gain, these opposed-mode sensors are an excellent opꢀon for sensing
in contaminated or dirty areas, and are also the best choice for long-range sensing.
OPPOSED
Infrared, 880 nm
Models
Cable
Range
Supply Voltage
Output Type
Q453E Emiꢁer
Q45VR3R Receiver
Q453EQ Emiꢁer
Q45VR3RQ Receiver
2-wire 2 m (6.5 ꢂ) cable
5-wire 2 m (6.5 ꢂ) cable
3-Pin Mini-style QD
5-Pin Mini-style QD
Universal 12 to 250 V dc or 24 to
250 V ac
60 m (200 ꢂ)
SPDT Electro-mechanical relay
Retroreꢂecꢀve-Mode Models
The visible red sensing beam of these sensors makes them very easy to align. Model Q45VR3LP
polarizes the emiꢄed light and filters out unwanted reꢁecꢀons, making sensing possible in
applicaꢀons otherwise considered unsuited to retroreꢁecꢀve sensing. Specified using the model
BRT-3 3-inch reꢁector (go to www.bannerengineering.com for addiꢀonal informaꢀon).
P
RETRO
POLAR RETRO
Visible red, 680 nm
(non-polarized)
Visible red, 680 nm
(polarized)
1
U.S. Patent no. 4356393
Original Document
53997 Rev. D
30 January 2017
53997
Q45VR3 Series Sensors
Non-Polarized
Cable
Models
Range
Supply Voltage
Output Type
Q45VR3LV
Q45VR3LVQ
5-wire 2 m (6.5 ꢂ) cable
5-Pin Mini-style QD
Universal 12 to 250 V dc or
24 to 250 V ac
SPDT Electro-mechanical
relay
0.08 to 9 m (3 in to 30 ꢂ)
Polarized
Cable
Models
Range
Supply Voltage
Output Type
Q45VR3LP
Q45VR3LPQ
5-wire 2 m (6.5 ꢂ) cable
5-Pin Mini-style QD
Universal 12 to 250 V dc or
24 to 250 V ac
SPDT Electro-mechanical
relay
0.15 to 6 m (6 in to 20 ꢂ)
Diffuse-Mode Models
These diffuse-mode models detect objects by sensing the reꢁecꢀon of their own emiꢄed light. Ideal for use when the
reꢁecꢀvity and profile of the object to be sensed are sufficient to return a large percentage of emiꢄed light back to
the sensor. Model Q45VR3DX is the first choice for diffuse-mode applicaꢀons when there are no background objects
to falsely return light.
DIFFUSE
Infrared, 880 nm
Short Range
Models
Range
Cable
Supply Voltage
Output Type
Q45VR3D
Q45VR3DQ
5-wire 2 m (6.5 ꢂ) cable
5-Pin Mini-style QD
Universal 12 to 250 V dc or
24 to 250 V ac
SPDT Electro-mechanical
relay
45 cm (18 inches)
Long Range
Cable
Models
Range
Supply Voltage
Output Type
Q45VR3DL
Q45VR3DLQ
1.8 m (6 ꢂ)
5-wire 2 m (6.5 ꢂ) cable
5-Pin Mini-style QD
Universal 12 to 250 V dc or
24 to 250 V ac
SPDT Electro-mechanical
relay
High Power
Cable
Models
Range
Supply Voltage
Output Type
Q45VR3DX
Q45VR3DXQ
5-wire 2 m (6.5 ꢂ) cable
5-Pin Mini-style QD
Universal 12 to 250 V dc or
24 to 250 V ac
SPDT Electro-mechanical
relay
3 m (10 ꢂ)
Convergent-Mode Models
These sensors are ideal for reꢁecꢀve sensing of very small parts or profiles, and can accurately sense the posiꢀon of
parts approaching from the side. Ignores all but highly reꢁecꢀve objects that are outside the sensing range.
CONVERGENT
Visible red, 680 nm
Models
Focus
Cable
Supply Voltage
Output Type
5-wire 2 m (6.5 ꢂ)
38 mm (1.5 in)
Q45VR3CV
Q45VR3CVQ
Q45VR3CV4
Q45VR3CV4Q
Universal 12 to 250 V dc or 24 to 250 V
ac
cable
SPDT Electro-mechanical relay
Spot Size at Focus: 1.3
mm (0.05 in)
5-Pin Mini-style QD
5-wire 2 m (6.5 ꢂ)
100 mm (4 in)
Universal 12 to 250 V dc or 24 to 250 V
ac
cable
SPDT Electro-mechanical relay
Spot Size at Focus: 1.5
mm (0.06 in)
5-Pin Mini-style QD
2
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 53997 Rev. D
Q45VR3 Series Sensors
Glass Fiber Opꢀc Models
These models are an excellent choice for glass fiber opꢀc applicaꢀons where faster sensor response is not important.
Their high excess gain means that opposed individual fibers can operate reliably in many very hosꢀle environments.
Also, special miniature bifurcated fiber opꢀc assemblies with bundle sizes as small as 0.5 mm (.020 in) diameter may be
used successfully for diffuse-mode sensing when using sensor model Q45VR3F(Q). For more informaꢀon on compaꢀble
glass fiber opꢀcs, go to www.bannerengineering.com.
GLASS FIBER
Infrared, 880 nm and
Visible red, 650 nm
Infrared, 880 nm
Models
Range
Cable
Supply Voltage
Output Type
Q45VR3F
Q45VR3FQ
5-wire 2 m (6.5 ꢂ) cable
5-Pin Mini-style QD
Range varies by sensing
mode and fiber opꢀcs used.
Universal 12 to 250 V dc or
24 to 250 V ac
SPDT Electro-mechanical
relay
Visible Red, 650 nm
Cable
Models
Range
Supply Voltage
Output Type
Q45VR3FV
Q45VR3FVQ
5-wire 2 m (6.5 ꢂ) cable
5-Pin Mini-style QD
Range varies by sensing
mode and fiber opꢀcs used.
Universal 12 to 250 V dc or
24 to 250 V ac
SPDT Electro-mechanical
relay
Plasꢀc Fiber Opꢀc Models
Lower in cost than glass fiber opꢀcs, plasꢀc fiber opꢀcs are ideal for use in situaꢀons where environmental condiꢀons
allow (for example, low levels of acids, alkalis, and solvents). Most are easily cut to length in the field, and are available
in a variety of sensing end styles. For more informaꢀon on compaꢀble plasꢀc fiber opꢀcs, go to
www.bannerengineering.com.
PLASTIC FIBER
Visible red, 660 nm
Models
Range
Cable
Supply Voltage
Output Type
Q45VR3FP
Q45VR3FPQ
5-wire 2 m (6.5 ꢂ) cable
5-Pin Mini-style QD
Range varies by sensing
mode and fiber opꢀcs used.
Universal 12 to 250 V dc or
24 to 250 V ac
SPDT Electro-mechanical
relay
Overview
Status indicator LEDs for power, signal, and output are clearly visible beneath a raised dome in the sensor’s transparent o-ring-sealed
polycarbonate cover. Also located beneath the sensor’s o-ring-sealed cover are controls for light/dark operate selecꢀon and the
sensiꢀvity adjustment.
•
•
The power indicator (green) lights when power is applied to the sensor.
The signal indicator (red) lights when the sensor sees its modulated light source and pulses at a rate proporꢀonal to the
2
™
strength of the received light signal; this is the AID Alignment Indicaꢀng Device .
•
The output indicator (amber) lights when the sensor’s output is conducꢀng. This indicator is especially useful when a ꢀming
logic module is used and signal and output condiꢀons are not concurrent.
1. Sensiꢀvity adjustment
2. LEDs
6
5
•
•
•
Green LED: Power on indicator
Red LED: Signal indicator
Amber LED: Output status indicator
1
3. Opꢀonal LED signal strength display
4. Opꢀonal ꢀming adjustment
5. Opꢀonal ꢀming adjustment
6. Light/dark operate switch
2
3
4
2
US patent no. 4356393
P/N 53997 Rev. D
www.bannerengineering.com - Tel: +1-763-544-3164
3
Q45VR3 Series Sensors
Wiring Diagrams
Q45VR3 Sensors with Aꢁached Cable
Q45VR3 Sensors with Quick-Disconnect 5-Pin Mini-Style (model suffix
Q)
brown
blue
brown
24–250 V ac or 12–250 V dc*
24–250 V ac or 12–250 V dc*
blue
white
yellow
NC
C
white
yellow
NC
C
black
black
NO
NO
Q453E Emiꢁers with Aꢁached Cable
Q453EQ Emiꢁers with Quick-Disconnect 3-Pin Mini-Style
brown
brown
24–250 V ac or 12–250 V dc*
blue
24–250 V ac or 12–250 V dc*
blue
black
*Connecꢀon of dc power is without regard to polarity.
4
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 53997 Rev. D
Q45VR3 Series Sensors
Speciꢃcaꢀons
Supply Voltage and Current
Repeatability
Opposed mode: 0.25 milliseconds
Universal voltage: 24 to 250 V ac, 50/60 Hz or 12 to 250 V dc (1.5 waꢄs
maximum)
All other sensing modes: 0.5 milliseconds
Response ꢀme and repeatability specificaꢀons are independent of signal
strength
Supply Protecꢀon Circuitry
Protected against transient voltages
DC hookup is without regard to polarity.
Adjustments
Light/Dark Operate select switch; and mulꢀ-turn Sensiꢀvity control on top of
sensor beneath a transparent o-ring-sealed cover, allows precise sensiꢀvity
seꢃng (turn clockwise to increase gain). Opꢀonal logic and logic/display
modules have adjustable ꢀming funcꢀons.
Output Conꢃguraꢀon
SPDT (Single-Pole, Double-Throw) electromechanical relay output. All models
except emiꢄers.
Output Raꢀng
Indicators
Max. switching power (resisꢀve load): 1250 VA, 150 W
Max. switching voltage (resisꢀve load): 250 V ac, 125 V dc
Max. switching current (resisꢀve load): 5 A @ 250 V ac, 5A @ 30 V dc derated
to 200 mA @ 125 V dc
Min. voltage and current: 5 V dc, 10 mA
Mechanical life of relay: 50,000,000 operaꢀons
Electrical life of relay at full resisꢀve load: 100,000 operaꢀons
®
Indicator LEDs are clearly visible beneath a raised transparent Lexan dome on
top of the sensor.
Power (green) LED lights whenever 24 to 250 V ac, or 12 to 250 V dc power is
applied
™
Signal (red) AID System LED lights whenever the sensor sees its modulated
light source, and pulses at a rate proporꢀonal to the strength of the received
light signal
Load (amber) LED lights whenever the output relay is energized
Opꢀonal 7-element LED signal strength display module
Output Protecꢀon Circuitry
Protected against false pulse on power-up
Construcꢀon
Output Response Time
Molded reinforced thermoplasꢀc polyester housing, o-ring-sealed transparent
3
15 milliseconds ON and OFF
®
Lexan cover, molded acrylic lenses, and stainless steel hardware. Q45s are
designed to withstand 1200 psi washdown. The base of cabled models has a
1/2-inch NPS integral internal conduit thread.
Note: 100 millisecond delay on power-up. Relay is
de-energized during this ꢀme.
Environmental Raꢀng
NEMA 6P, IEC IP67
Required Overcurrent Protecꢀon
Connecꢀons
WARNING: Electrical connecꢀons must be made
by qualified personnel in accordance with local
and naꢀonal electrical codes and regulaꢀons.
PVC-jacketed 2 m (6.5 ꢂ) or 9 m (30 ꢂ) unterminated cables, or Mini-style
quick-disconnect (QD) fiꢃngs are available (“Q”- suffix models). QD cables are
ordered separately.
Overcurrent protecꢀon is required to be provided by end product applicaꢀon
per the supplied table.
Operaꢀng Condiꢀons
Temperature: –25 °C to +55 °C (−13 °F to +131 °F)
90% at +50 °C maximum relaꢀve humidity (non-condensing)
Overcurrent protecꢀon may be provided with external fusing or via Current
Limiꢀng, Class 2 Power Supply.
Applicaꢀon Notes
Supply wiring leads < 24 AWG shall not be spliced.
For addiꢀonal product support, go to www.bannerengineering.com.
Transient suppression is recommended for contacts switching inducꢀve loads.
Opꢀonal output ꢀming modules are available. See Output Timing Logic and
Signal Strength Display Modules on page 10 for more informaꢀon.
Supply Wiring (AWG)
Required Overcurrent Protecꢀon (Amps)
Cerꢀꢃcaꢀons
20
22
24
26
28
30
5.0
3.0
2.0
1.0
0.8
0.5
3
®
Lexan is a registered trademark of General Electric Co.
P/N 53997 Rev. D
www.bannerengineering.com - Tel: +1-763-544-3164
5
Q45VR3 Series Sensors
Dimensions
Opposed, Retro, and Diffuse Sensing Modes (Model Suffix E, R, D, DL, DX, LP, and LV)
Cabled Models
Quick-Disconnect Models
54.1 mm
(2.13")
44.5 mm
(1.75")
Lens Centerline
50.8 mm
(2.00")
69.0 mm
(2.72")
6.4 mm (0.25")
87.6 mm
(3.45")
4.5 mm (#10) Screw
Clearance (2)
7.1 mm
(0.28")
30.0 mm
(1.18")
Internal Thread
(1/2–14NPSM)
ø 6.1 (0.24")
External Thread
M30 X 1.5
2m (6.5') Cable
External thread (M30 x 1.5)
hex nut supplied
14 mm (0.6")
Mini-style QD Connector
Convergent Sensor Models
(CV and CV4)
Glass Fiber Opꢀc Models
Plasꢀc Fiber Opꢀc Models
(FP)
(F and FV)
60.5 mm
(2.38")
61.7 mm
(2.43")
59.9 mm
(2.36")
6
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 53997 Rev. D
Q45VR3 Series Sensors
Performance Curves
Opposed
Excess Gain
Beam Paꢁern
1000
Q45E/R
Opposed Mode
E
X
C
E
S
S
Effecꢀve Beam: 13 mm
Q45E/R
Opposed Mode
1.5 m
60 in
100
1.0 m
0.5 m
0
40 in
20 in
0
10
G
A
I
0.5 m
1.0 m
1.5 m
20 in
40 in
60 in
N
1
0.1 m
0.33 ft
1.0 m
3.3 ft
10 m
33 ft
100 m
330 ft
0
12 m
40 ft
24 m
80 ft
36 m
120 ft
48 m
160 ft
60 m
200 ft
DISTANCE
DISTANCE
Retroreꢂecꢀve Non-Polarized
Excess Gain Beam Paꢁern
Retroreꢂecꢀve Polarized
Excess Gain Beam Paꢁern
1000
1000
Q45LP
Q45LV
E
X
C
E
S
S
E
X
C
E
S
S
Retroreflective Mode
Retroreflective Mode
100
10
Q45LV
Retroreflective Mode
Q45LP
Retroreflective
Mode
100
10
75 mm
3.0 in
75 mm
3.0 in
50 mm
25 mm
0
2.0 in
1.0 in
0
50 mm
25 mm
0
2.0 in
1.0 in
0
With BRT-3 Reflector
With BRT-3 Reflector
G
A
I
With BRT-3 Reflector
G
A
I
25 mm
50 mm
75 mm
1.0 in
2.0 in
3.0 in
25 mm
50 mm
75 mm
1.0 in
2.0 in
3.0 in
With BRT-3 Reflector
N
N
1
1
.01 m
.033 ft
.10 m
.33 ft
1.0 m
3.3 ft
10 m
33 ft
0
1.5 m
5 ft
3 m
10 ft
4.5 m
15 ft
6 m
20 ft
7.5 m
25 ft
.01 m
.033 ft
.10 m
.33 ft
1.0 m
3.3 ft
10 m
33 ft
0
3 m
10 ft
6 m
20 ft
9 m
30 ft
12 m
40 ft
15 m
50 ft
DISTANCE
DISTANCE
DISTANCE
DISTANCE
Diffuse-mode performance curves are based on a 90% reꢁectance white test card.
Diffuse Short Range
Diffuse Long Range
Excess Gain
Beam Paꢁern
Excess Gain
Beam Paꢁern
1000
1000
100
10
Q45DL
Q45D
E
X
C
E
S
S
E
X
C
E
S
S
Diffuse Mode
Diffuse Mode
Q45DL
Diffuse Mode
100
10
15 mm
0.6 in
75 mm
3.0 in
Q45D
Diffuse Mode
10 mm
5 mm
0
0.4 in
0.2 in
0
50 mm
25 mm
0
2.0 in
1.0 in
0
G
A
I
G
A
I
5 mm
10 mm
15 mm
0.2 in
0.4 in
0.6 in
25 mm
50 mm
75 mm
1.0 in
2.0 in
3.0 in
N
N
1
1
1.0 mm
0.04 in
10 mm
0.4 in
100 mm
4.0 in
1000 mm
40 in
0
100 mm 200mm 300 mm 400 mm 500 mm
4.0 in 8.0 in 12.0 in 16.0 in 20.0 in
.01 m
.033 ft
.10 m
.33 ft
1.0 m
3.3 ft
10 m
33 ft
0
0.6 m
2 ft
1.2 m
4 ft
1.8 m
6 ft
2.4 m
8 ft
3.0 m
10 ft
DISTANCE
DISTANCE
DISTANCE
DISTANCE
P/N 53997 Rev. D
www.bannerengineering.com - Tel: +1-763-544-3164
7
Q45VR3 Series Sensors
Diffuse High Power
Excess Gain
Beam Paꢁern
1000
100
10
Q45DX
E
X
C
E
S
S
Diffuse Mode
Q45DX
Diffuse Mode
75 mm
3.0 in
50 mm
25 mm
0
2.0 in
1.0 in
0
G
A
I
25 mm
50 mm
75 mm
1.0 in
2.0 in
3.0 in
N
1
0.01 m
0.033 ft
0.1 m
0.33 ft
1.0 m
3.3 ft
10 m
33 ft
0
0.6 m
2 ft
1.2 m
4 ft
1.8 m
6 ft
2.4 m
8 ft
3.0 m
10 ft
DISTANCE
DISTANCE
Convergent mode performance curves are based on a 90% reꢁectance white test card.
Convergent (CV and CVQ Models) Convergent (CV4 and CV4Q Models)
Excess Gain Beam Paꢁern Excess Gain Beam Paꢁern
1000
100
10
1000
100
10
Q45CV
Q45CV4
E
X
C
E
S
S
E
X
C
E
S
S
Convergent Mode
Convergent Mode
Q45CV4
Q45CV
3.8 mm
0.15 in
3.8 mm
0.15 in
Convergent Mode
Convergent Mode
2.5 mm
1.2 mm
0
0.10 in
0.05 in
0
2.5 mm
1.2 mm
0
0.10 in
0.05 in
0
G
A
I
G
A
I
1.2 mm
2.5 mm
3.8 mm
0.05 in
0.10 in
0.15 in
1.2 mm
2.5 mm
3.8 mm
0.05 in
0.10 in
0.15 in
N
N
1
1
1 mm
.04 in
10 mm
.4 in
100 mm
4 in
1000 mm
40 in
0
38 mm
1.5 in
75 mm 113 mm 150 mm 190 mm
3.0 in 4.5 in 6.0 in 7.5 in
1 mm
.04 in
10 mm
.4 in
100 mm
4 in
1000 mm
40 in
0
38 mm
1.5 in
75 mm 113 mm 150 mm 190 mm
3.0 in 4.5 in 6.0 in 7.5 in
DISTANCE
DISTANCE
DISTANCE
DISTANCE
Glass fiber opꢀc Diffuse mode performance curves are based on a 90% reꢁectance white test card.
Glass Fiber Opꢀc, Infrared (Opposed Mode) Glass Fiber Opꢀc, Infrared (Diffuse Mode)
Excess Gain Beam Paꢁern Excess Gain Beam Paꢁern
1000
100
10
1000
100
10
Q45F
Q45F
E
X
C
E
S
S
E
X
C
E
S
S
Opposed Mode
IT23S Fibers
Diffuse Mode
Q45F
Opposed Mode
Q45F
Diffuse Mode
150 mm
6.0 in
3.8 mm
0.15 in
100 mm
50 mm
0
4.0 in
2.0 in
0
2.5 mm
1.3 mm
0
0.10 in
0.05 in
0
IT23S Fibers
BT13S Fiber
BT23S Fiber
IT13S Fibers
BT23S Fiber
G
A
I
G
A
I
IT13S Fibers
50 mm
100 mm
150 mm
2.0 in
4.0 in
6.0 in
1.3 mm
2.5 mm
3.8 mm
0.05 in
0.10 in
0.15 in
BT13S Fiber
N
N
1
1
0.01 m
0.03 ft
0.1 m
0.33 ft
1.0 m
3.3 ft
10 m
33 ft
0
0.4 m
15 in
0.8 m
30 in
1.2 m
45 in
1.6 m
60 in
2.0 m
75 in
1 mm
0.04 in
10 mm
0.4 in
100 mm
4.0 in
1000 mm
40 in
0
25 mm
1 in
50 mm
2 in
75 mm 100 mm 125 mm
3 in 4 in 5 in
DISTANCE
DISTANCE
DISTANCE
DISTANCE
8
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 53997 Rev. D
Q45VR3 Series Sensors
Glass Fiber Opꢀc, Visible Red (Opposed Mode)
Excess Gain Beam Paꢁern
Glass Fiber Opꢀc, Visible Red (Diffuse Mode)
Excess Gain Beam Paꢁern
1000
100
10
1000
100
10
Q45FV
Q45FV
E
X
C
E
S
S
E
X
C
E
S
S
Diffuse Mode
Opposed Mode
Q45FV
Opposed Mode
Q45FV
Diffuse Mode
30 mm
1.2 in
3.0 mm
0.12 in
20 mm
10 mm
0
0.8 in
0.4 in
0
2.0 mm
1.0 mm
0
0.08 in
0.04 in
0
IT23S Fibers
IT23S Fibers
BT13S Fiber
G
A
I
G
A
I
10 mm
20 mm
30 mm
0.4 in
0.8 in
1.2 in
BT13S
Fiber
IT13S Fibers
IT13S Fibers
1.0 mm
2.0 mm
3.0 mm
0.04 in
0.08 in
0.12 in
BT23S Fiber
BT23S Fiber
N
N
1
1
1 mm
0.04 in
10 mm
0.4 in
100 mm
4.0 in
1000 mm
40 in
0
100 mm 150 mm 200 mm 250 mm 300 mm
4 in 6 in 8 in 10 in 12 in
1.0 mm
0.04 in
10 mm
0.4 in
100 mm
4 in
1000 mm
40 in
0
5 mm
0.2 in
10 mm
0.4 in
15 mm
0.6 in
20 mm 25 mm
0.8 in 1.0 in
DISTANCE
DISTANCE
DISTANCE
DISTANCE
Plasꢀc fiber opꢀc Diffuse mode performance curves are based on a 90% reꢁectance white test card.
Plasꢀc Fiber Opꢀc (Opposed Mode) Plasꢀc Fiber Opꢀc (Diffuse Mode)
Excess Gain Beam Paꢁern Excess Gain Beam Paꢁern
1000
100
10
1000
100
10
Q45FP
Q45FP
E
X
C
E
S
S
E
X
C
E
S
S
Opposed Mode
Diffuse Mode
PBT46U Fiber
Q45FP
45 mm
1.8 in
Q45FP
18 mm
0.75 in
Opposed Mode
Diffuse Mode
30 mm
15 mm
0
1.2 in
0.6 in
0
PIT46U Fibers
12 mm
6 mm
0
0.50 in
0.25 in
0
PBT46U Fiber
PIT46U Fibers
G
A
I
G
A
I
PIT26U Fibers
15 mm
30 mm
45 mm
0.6 in
1.2 in
1.8 in
6 mm
12 mm
18 mm
0.25 in
0.50 in
0.75 in
PIT26U Fibers
N
N
PBT26U Fiber
1
1
1 mm
0.04 in
10 mm
0.4 in
100 mm
4.0 in
1000 mm
40 in
0.1 mm
0.004 in
1 mm
0.04 in
10 mm
0.4 in
100 mm
4 in
0
10 mm
0.4 in
20 mm
0.8 in
30 mm
1.2 in
40 mm 50 mm
1.6 in 2.0 in
0
25 mm
1.0 in
50 mm
2.0 in
75 mm 100 mm 125 mm
3.0 in 4.0 in 5.0 in
DISTANCE
DISTANCE
DISTANCE
DISTANCE
Accessories
Cordsets
3-Pin Mini-Style Cordsets
Model
Length
Style
Dimensions
Pinout (Female)
MBCC-306
1.83 m (6.5 ꢂ)
3.66 m (12 ꢂ)
1
52 Typ.
7/8-16UN-2B
ø 25.5
MBCC-312
2
3
Straight
1 = Black
2 = Brown
3 = Blue
MBCC-330
9.14 m (30 ꢂ)
5-Pin Mini-Style Cordsets
Model
Length
Style
Dimensions
Pinout (Female)
MBCC-506
1.83 m (6 ꢂ)
3.66 m (12 ꢂ)
1
5
MBCC-512
52 Typ.
7/8-16UN-2B
ø 25.5
2
4
3
Straight
1 = Black
2 = Blue
MBCC-530
9.14 m (30 ꢂ)
3 = Yellow
4 = Brown
5 = White
P/N 53997 Rev. D
www.bannerengineering.com - Tel: +1-763-544-3164
9
Q45VR3 Series Sensors
Retroreꢂecꢀve Targets
Banner offers a wide selecꢀon of high-quality retroreꢁecꢀve targets. See
www.bannerengineering.com for complete informaꢀon.
Note: Polarized sensors require corner cube type
retroreꢁecꢀve targets. Non-polarized sensors may use any
retroreꢁecꢀve target.
Brackets
SMB30C
56
SMB30MM
•
12-ga. stainless steel bracket
•
30 mm split clamp, black PBT
bracket
Stainless steel mounꢀng
hardware included
Mounꢀng hole for 30 mm
57
70
with curved mounꢀng slots for
A
B
versaꢀle orientaꢀon
Clearance for M6 (¼ in)
hardware
Mounꢀng hole for 30 mm
sensor
66
13
•
•
C
•
•
57
B
sensor
A
Hole center spacing: A=ø 45
Hole size: B=ø 27.2
Hole center spacing: A = 51, A to B = 25.4
Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1
SMB30SC
67
•
•
•
Swivel bracket with 30 mm
B
mounꢀng hole for sensor
Black reinforced thermoplasꢀc
polyester
Stainless steel mounꢀng and
swivel locking hardware
included
58
29
A
Hole center spacing: A=ø 50.8
Hole size: A=ø 7.0, B=ø 30.0
Output Timing Logic and Signal Strength Display Modules
Q45 sensors easily accept the addiꢀon of output ꢀming logic and signal strength display funcꢀons. Display modules have a seven-
™
element display that gives a more precise indicaꢀon of excess gain than does the AID system LED that is standard on Q45 sensors. The
modules listed below may be used with all Q45VR3 sensors. Refer to the module's datasheet for more informaꢀon.
Models
45LM58
45LM58D
45LMD
Logic and/or Display Funcꢀon
Programmable output ꢀming logic
Programmable output ꢀming logic plus signal strength display
Signal strength display only (no ꢀming funcꢀon)
10
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 53997 Rev. D
Q45VR3 Series Sensors
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or
replace, free of charge, any product of its manufacture which, at the ꢀme it is returned to the factory, is found to have been defecꢀve during the warranty period. This warranty does not cover
damage or liability for misuse, abuse, or the improper applicaꢀon or installaꢀon of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discreꢀon of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY
OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT
DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligaꢀons or liabiliꢀes relaꢀng to any product previously
manufactured by Banner Engineering Corp. Any misuse, abuse, or improper applicaꢀon or installaꢀon of this product or use of the product for personal protecꢀon applicaꢀons when the
product is idenꢀfied as not intended for such purposes will void the product warranty. Any modificaꢀons to this product without prior express approval by Banner Engineering Corp will void the
product warranꢀes. All specificaꢀons published in this document are subject to change; Banner reserves the right to modify product specificaꢀons or update documentaꢀon at any ꢀme.
Specificaꢀons and product informaꢀon in English supersede that which is provided in any other language. For the most recent version of any documentaꢀon, refer to:
www.bannerengineering.com.
©
Banner Engineering Corp. All rights reserved
相关型号:
©2020 ICPDF网 联系我们和版权申明