Q45VR3FVQ [BANNER]

Q45VR3 Series Sensors;


型号：	Q45VR3FVQ
厂家：	Banner Engineering
描述：	Q45VR3 Series Sensors
文件：	总11页 (文件大小：414K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Q45VR3 Series Sensors

Datasheet

Universal Voltage Photoelectric Sensors with Electromechanical Relay Output

•

Advanced one-piece photoelectric sensors with outstanding opꢀcal performance and

extremely rugged design

•

Universal supply voltage: 12 to 250 V dc or 24 to 250 V ac

Electromechanical relay for economical, high-capacity switching and immunity to electrical

noise

•

Mulꢀple sensing modes available: opposed, diﬀuse, retroreꢁecꢀve, and convergent, plus glass

and plasꢀc ﬁber opꢀc models

•

Selectable light/dark operate

Versaꢀle plug-in modules available for output ꢀming logic and/or signal strength display

™

Highly visible Power, Signal (AID System ), and Output indicator LEDs

Choice of prewired 2 m (6.5 ꢂ) or 9 m (30 ꢂ) unterminated cable or Mini-style quick-

disconnect ﬁꢃng

•

Versaꢀle mounꢀng opꢀons

Designed to withstand 1200 psi washdown; exceeds its NEMA 6P and IEC IP67 raꢀng

WARNING: Not To Be Used for Personnel Protecꢀon

Never use this device as a sensing device for personnel protecꢀon. Doing so could lead to serious injury or

death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel

safety applicaꢀons. A sensor failure or malfuncꢀon can cause either an energized or de-energized sensor output

condiꢀon.

Models

To order the 9 m (30 ꢂ) cable models, add the suﬃx "W/30" to the cabled model number. For example: Q453E W/30.

Models with a quick disconnect (QD) connector require a maꢀng cable.

Opposed-Mode Emiꢁer (E) and Receiver (R) Models

Because of their extremely high excess gain, these opposed-mode sensors are an excellent opꢀon for sensing

in contaminated or dirty areas, and are also the best choice for long-range sensing.

OPPOSED

Infrared, 880 nm

Models

Cable

Range

Supply Voltage

Output Type

Q453E Emiꢁer

Q45VR3R Receiver

Q453EQ Emiꢁer

Q45VR3RQ Receiver

2-wire 2 m (6.5 ꢂ) cable

5-wire 2 m (6.5 ꢂ) cable

3-Pin Mini-style QD

5-Pin Mini-style QD

Universal 12 to 250 V dc or 24 to

250 V ac

60 m (200 ꢂ)

SPDT Electro-mechanical relay

Retroreꢂecꢀve-Mode Models

The visible red sensing beam of these sensors makes them very easy to align. Model Q45VR3LP

polarizes the emiꢄed light and ﬁlters out unwanted reꢁecꢀons, making sensing possible in

applicaꢀons otherwise considered unsuited to retroreꢁecꢀve sensing. Speciﬁed using the model

BRT-3 3-inch reꢁector (go to www.bannerengineering.com for addiꢀonal informaꢀon).

RETRO

POLAR RETRO

Visible red, 680 nm

(non-polarized)

Visible red, 680 nm

(polarized)

U.S. Patent no. 4356393

Original Document

53997 Rev. D

30 January 2017

53997

Q45VR3 Series Sensors

Non-Polarized

Cable

Models

Range

Supply Voltage

Output Type

Q45VR3LV

Q45VR3LVQ

5-wire 2 m (6.5 ꢂ) cable

5-Pin Mini-style QD

Universal 12 to 250 V dc or

24 to 250 V ac

SPDT Electro-mechanical

relay

0.08 to 9 m (3 in to 30 ꢂ)

Polarized

Cable

Models

Range

Supply Voltage

Output Type

Q45VR3LP

Q45VR3LPQ

5-wire 2 m (6.5 ꢂ) cable

5-Pin Mini-style QD

Universal 12 to 250 V dc or

24 to 250 V ac

SPDT Electro-mechanical

relay

0.15 to 6 m (6 in to 20 ꢂ)

Diﬀuse-Mode Models

These diﬀuse-mode models detect objects by sensing the reꢁecꢀon of their own emiꢄed light. Ideal for use when the

reꢁecꢀvity and proﬁle of the object to be sensed are suﬃcient to return a large percentage of emiꢄed light back to

the sensor. Model Q45VR3DX is the ﬁrst choice for diﬀuse-mode applicaꢀons when there are no background objects

to falsely return light.

DIFFUSE

Infrared, 880 nm

Short Range

Models

Range

Cable

Supply Voltage

Output Type

Q45VR3D

Q45VR3DQ

5-wire 2 m (6.5 ꢂ) cable

5-Pin Mini-style QD

Universal 12 to 250 V dc or

24 to 250 V ac

SPDT Electro-mechanical

relay

45 cm (18 inches)

Long Range

Cable

Models

Range

Supply Voltage

Output Type

Q45VR3DL

Q45VR3DLQ

1.8 m (6 ꢂ)

5-wire 2 m (6.5 ꢂ) cable

5-Pin Mini-style QD

Universal 12 to 250 V dc or

24 to 250 V ac

SPDT Electro-mechanical

relay

High Power

Cable

Models

Range

Supply Voltage

Output Type

Q45VR3DX

Q45VR3DXQ

5-wire 2 m (6.5 ꢂ) cable

5-Pin Mini-style QD

Universal 12 to 250 V dc or

24 to 250 V ac

SPDT Electro-mechanical

relay

3 m (10 ꢂ)

Convergent-Mode Models

These sensors are ideal for reꢁecꢀve sensing of very small parts or proﬁles, and can accurately sense the posiꢀon of

parts approaching from the side. Ignores all but highly reꢁecꢀve objects that are outside the sensing range.

CONVERGENT

Visible red, 680 nm

Models

Focus

Cable

Supply Voltage

Output Type

5-wire 2 m (6.5 ꢂ)

38 mm (1.5 in)

Q45VR3CV

Q45VR3CVQ

Q45VR3CV4

Q45VR3CV4Q

Universal 12 to 250 V dc or 24 to 250 V

cable

SPDT Electro-mechanical relay

Spot Size at Focus: 1.3

mm (0.05 in)

5-Pin Mini-style QD

5-wire 2 m (6.5 ꢂ)

100 mm (4 in)

Universal 12 to 250 V dc or 24 to 250 V

cable

SPDT Electro-mechanical relay

Spot Size at Focus: 1.5

mm (0.06 in)

5-Pin Mini-style QD

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 53997 Rev. D

Q45VR3 Series Sensors

Glass Fiber Opꢀc Models

These models are an excellent choice for glass ﬁber opꢀc applicaꢀons where faster sensor response is not important.

Their high excess gain means that opposed individual ﬁbers can operate reliably in many very hosꢀle environments.

Also, special miniature bifurcated ﬁber opꢀc assemblies with bundle sizes as small as 0.5 mm (.020 in) diameter may be

used successfully for diﬀuse-mode sensing when using sensor model Q45VR3F(Q). For more informaꢀon on compaꢀble

glass ﬁber opꢀcs, go to www.bannerengineering.com.

GLASS FIBER

Infrared, 880 nm and

Visible red, 650 nm

Infrared, 880 nm

Models

Range

Cable

Supply Voltage

Output Type

Q45VR3F

Q45VR3FQ

5-wire 2 m (6.5 ꢂ) cable

5-Pin Mini-style QD

Range varies by sensing

mode and ﬁber opꢀcs used.

Universal 12 to 250 V dc or

24 to 250 V ac

SPDT Electro-mechanical

relay

Visible Red, 650 nm

Cable

Models

Range

Supply Voltage

Output Type

Q45VR3FV

Q45VR3FVQ

5-wire 2 m (6.5 ꢂ) cable

5-Pin Mini-style QD

Range varies by sensing

mode and ﬁber opꢀcs used.

Universal 12 to 250 V dc or

24 to 250 V ac

SPDT Electro-mechanical

relay

Plasꢀc Fiber Opꢀc Models

Lower in cost than glass ﬁber opꢀcs, plasꢀc ﬁber opꢀcs are ideal for use in situaꢀons where environmental condiꢀons

allow (for example, low levels of acids, alkalis, and solvents). Most are easily cut to length in the ﬁeld, and are available

in a variety of sensing end styles. For more informaꢀon on compaꢀble plasꢀc ﬁber opꢀcs, go to

www.bannerengineering.com.

PLASTIC FIBER

Visible red, 660 nm

Models

Range

Cable

Supply Voltage

Output Type

Q45VR3FP

Q45VR3FPQ

5-wire 2 m (6.5 ꢂ) cable

5-Pin Mini-style QD

Range varies by sensing

mode and ﬁber opꢀcs used.

Universal 12 to 250 V dc or

24 to 250 V ac

SPDT Electro-mechanical

relay

Overview

Status indicator LEDs for power, signal, and output are clearly visible beneath a raised dome in the sensor’s transparent o-ring-sealed

polycarbonate cover. Also located beneath the sensor’s o-ring-sealed cover are controls for light/dark operate selecꢀon and the

sensiꢀvity adjustment.

•

The power indicator (green) lights when power is applied to the sensor.

The signal indicator (red) lights when the sensor sees its modulated light source and pulses at a rate proporꢀonal to the

™

strength of the received light signal; this is the AID Alignment Indicaꢀng Device .

•

The output indicator (amber) lights when the sensor’s output is conducꢀng. This indicator is especially useful when a ꢀming

logic module is used and signal and output condiꢀons are not concurrent.

1. Sensiꢀvity adjustment

2. LEDs

•

Green LED: Power on indicator

Red LED: Signal indicator

Amber LED: Output status indicator

3. Opꢀonal LED signal strength display

4. Opꢀonal ꢀming adjustment

5. Opꢀonal ꢀming adjustment

6. Light/dark operate switch

US patent no. 4356393

P/N 53997 Rev. D

www.bannerengineering.com - Tel: +1-763-544-3164

Q45VR3 Series Sensors

Wiring Diagrams

Q45VR3 Sensors with Aꢁached Cable

Q45VR3 Sensors with Quick-Disconnect 5-Pin Mini-Style (model suﬃx

brown

blue

brown

24–250 V ac or 12–250 V dc*

blue

white

yellow

white

yellow

black

Q453E Emiꢁers with Aꢁached Cable

Q453EQ Emiꢁers with Quick-Disconnect 3-Pin Mini-Style

brown

24–250 V ac or 12–250 V dc*

blue

24–250 V ac or 12–250 V dc*

blue

black

*Connecꢀon of dc power is without regard to polarity.

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 53997 Rev. D

Q45VR3 Series Sensors

Speciꢃcaꢀons

Supply Voltage and Current

Repeatability

Opposed mode: 0.25 milliseconds

Universal voltage: 24 to 250 V ac, 50/60 Hz or 12 to 250 V dc (1.5 waꢄs

maximum)

All other sensing modes: 0.5 milliseconds

Response ꢀme and repeatability speciﬁcaꢀons are independent of signal

strength

Supply Protecꢀon Circuitry

Protected against transient voltages

DC hookup is without regard to polarity.

Adjustments

Light/Dark Operate select switch; and mulꢀ-turn Sensiꢀvity control on top of

sensor beneath a transparent o-ring-sealed cover, allows precise sensiꢀvity

seꢃng (turn clockwise to increase gain). Opꢀonal logic and logic/display

modules have adjustable ꢀming funcꢀons.

Output Conꢃguraꢀon

SPDT (Single-Pole, Double-Throw) electromechanical relay output. All models

except emiꢄers.

Output Raꢀng

Indicators

Max. switching power (resisꢀve load): 1250 VA, 150 W

Max. switching voltage (resisꢀve load): 250 V ac, 125 V dc

Max. switching current (resisꢀve load): 5 A @ 250 V ac, 5A @ 30 V dc derated

to 200 mA @ 125 V dc

Min. voltage and current: 5 V dc, 10 mA

Mechanical life of relay: 50,000,000 operaꢀons

Electrical life of relay at full resisꢀve load: 100,000 operaꢀons

Indicator LEDs are clearly visible beneath a raised transparent Lexan dome on

top of the sensor.

Power (green) LED lights whenever 24 to 250 V ac, or 12 to 250 V dc power is

applied

™

Signal (red) AID System LED lights whenever the sensor sees its modulated

light source, and pulses at a rate proporꢀonal to the strength of the received

light signal

Load (amber) LED lights whenever the output relay is energized

Opꢀonal 7-element LED signal strength display module

Output Protecꢀon Circuitry

Protected against false pulse on power-up

Construcꢀon

Output Response Time

Molded reinforced thermoplasꢀc polyester housing, o-ring-sealed transparent

15 milliseconds ON and OFF

Lexan cover, molded acrylic lenses, and stainless steel hardware. Q45s are

designed to withstand 1200 psi washdown. The base of cabled models has a

1/2-inch NPS integral internal conduit thread.

Note: 100 millisecond delay on power-up. Relay is

de-energized during this ꢀme.

Environmental Raꢀng

NEMA 6P, IEC IP67

Required Overcurrent Protecꢀon

Connecꢀons

WARNING: Electrical connecꢀons must be made

by qualiﬁed personnel in accordance with local

and naꢀonal electrical codes and regulaꢀons.

PVC-jacketed 2 m (6.5 ꢂ) or 9 m (30 ꢂ) unterminated cables, or Mini-style

quick-disconnect (QD) ﬁꢃngs are available (“Q”- suﬃx models). QD cables are

ordered separately.

Overcurrent protecꢀon is required to be provided by end product applicaꢀon

per the supplied table.

Operaꢀng Condiꢀons

Temperature: –25 °C to +55 °C (−13 °F to +131 °F)

90% at +50 °C maximum relaꢀve humidity (non-condensing)

Overcurrent protecꢀon may be provided with external fusing or via Current

Limiꢀng, Class 2 Power Supply.

Applicaꢀon Notes

Supply wiring leads < 24 AWG shall not be spliced.

For addiꢀonal product support, go to www.bannerengineering.com.

Transient suppression is recommended for contacts switching inducꢀve loads.

Opꢀonal output ꢀming modules are available. See Output Timing Logic and

Signal Strength Display Modules on page 10 for more informaꢀon.

Supply Wiring (AWG)

Required Overcurrent Protecꢀon (Amps)

Cerꢀꢃcaꢀons

5.0

3.0

2.0

1.0

0.8

0.5

Lexan is a registered trademark of General Electric Co.

P/N 53997 Rev. D

www.bannerengineering.com - Tel: +1-763-544-3164

Q45VR3 Series Sensors

Dimensions

Opposed, Retro, and Diﬀuse Sensing Modes (Model Suﬃx E, R, D, DL, DX, LP, and LV)

Cabled Models

Quick-Disconnect Models

54.1 mm

(2.13")

44.5 mm

(1.75")

Lens Centerline

50.8 mm

(2.00")

69.0 mm

(2.72")

6.4 mm (0.25")

87.6 mm

(3.45")

4.5 mm (#10) Screw

Clearance (2)

7.1 mm

(0.28")

30.0 mm

(1.18")

Internal Thread

(1/2–14NPSM)

ø 6.1 (0.24")

External Thread

M30 X 1.5

2m (6.5') Cable

External thread (M30 x 1.5)

hex nut supplied

14 mm (0.6")

Mini-style QD Connector

Convergent Sensor Models

(CV and CV4)

Glass Fiber Opꢀc Models

Plasꢀc Fiber Opꢀc Models

(FP)

(F and FV)

60.5 mm

(2.38")

61.7 mm

(2.43")

59.9 mm

(2.36")

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 53997 Rev. D

Q45VR3 Series Sensors

Performance Curves

Opposed

Excess Gain

Beam Paꢁern

1000

Q45E/R

Opposed Mode

Eﬀecꢀve Beam: 13 mm

Q45E/R

Opposed Mode

1.5 m

60 in

100

1.0 m

0.5 m

40 in

20 in

0.5 m

1.0 m

1.5 m

20 in

40 in

60 in

0.1 m

0.33 ft

1.0 m

3.3 ft

10 m

33 ft

100 m

330 ft

12 m

40 ft

24 m

80 ft

36 m

120 ft

48 m

160 ft

60 m

200 ft

DISTANCE

Retroreꢂecꢀve Non-Polarized

Excess Gain Beam Paꢁern

Retroreꢂecꢀve Polarized

Excess Gain Beam Paꢁern

1000

Q45LP

Q45LV

Retroreflective Mode

100

Q45LV

Retroreflective Mode

Q45LP

Retroreflective

Mode

100

75 mm

3.0 in

75 mm

3.0 in

50 mm

25 mm

2.0 in

1.0 in

50 mm

25 mm

2.0 in

1.0 in

With BRT-3 Reflector

25 mm

50 mm

75 mm

1.0 in

2.0 in

3.0 in

25 mm

50 mm

75 mm

1.0 in

2.0 in

3.0 in

With BRT-3 Reflector

.01 m

.033 ft

.10 m

.33 ft

1.0 m

3.3 ft

10 m

33 ft

1.5 m

5 ft

3 m

10 ft

4.5 m

15 ft

6 m

20 ft

7.5 m

25 ft

.01 m

.033 ft

.10 m

.33 ft

1.0 m

3.3 ft

10 m

33 ft

3 m

10 ft

6 m

20 ft

9 m

30 ft

12 m

40 ft

15 m

50 ft

DISTANCE

Diﬀuse-mode performance curves are based on a 90% reꢁectance white test card.

Diﬀuse Short Range

Diﬀuse Long Range

Excess Gain

Beam Paꢁern

Excess Gain

Beam Paꢁern

1000

100

Q45DL

Q45D

Diffuse Mode

Q45DL

Diffuse Mode

100

15 mm

0.6 in

75 mm

3.0 in

Q45D

Diffuse Mode

10 mm

5 mm

0.4 in

0.2 in

50 mm

25 mm

2.0 in

1.0 in

5 mm

10 mm

15 mm

0.2 in

0.4 in

0.6 in

25 mm

50 mm

75 mm

1.0 in

2.0 in

3.0 in

1.0 mm

0.04 in

10 mm

0.4 in

100 mm

4.0 in

1000 mm

40 in

100 mm 200mm 300 mm 400 mm 500 mm

4.0 in 8.0 in 12.0 in 16.0 in 20.0 in

.01 m

.033 ft

.10 m

.33 ft

1.0 m

3.3 ft

10 m

33 ft

0.6 m

2 ft

1.2 m

4 ft

1.8 m

6 ft

2.4 m

8 ft

3.0 m

10 ft

DISTANCE

P/N 53997 Rev. D

www.bannerengineering.com - Tel: +1-763-544-3164

Q45VR3 Series Sensors

Diﬀuse High Power

Excess Gain

Beam Paꢁern

1000

100

Q45DX

Diffuse Mode

Q45DX

Diffuse Mode

75 mm

3.0 in

50 mm

25 mm

2.0 in

1.0 in

25 mm

50 mm

75 mm

1.0 in

2.0 in

3.0 in

0.01 m

0.033 ft

0.1 m

0.33 ft

1.0 m

3.3 ft

10 m

33 ft

0.6 m

2 ft

1.2 m

4 ft

1.8 m

6 ft

2.4 m

8 ft

3.0 m

10 ft

DISTANCE

Convergent mode performance curves are based on a 90% reꢁectance white test card.

Convergent (CV and CVQ Models) Convergent (CV4 and CV4Q Models)

Excess Gain Beam Paꢁern Excess Gain Beam Paꢁern

1000

100

1000

100

Q45CV

Q45CV4

Convergent Mode

Q45CV4

Q45CV

3.8 mm

0.15 in

3.8 mm

0.15 in

Convergent Mode

2.5 mm

1.2 mm

0.10 in

0.05 in

2.5 mm

1.2 mm

0.10 in

0.05 in

1.2 mm

2.5 mm

3.8 mm

0.05 in

0.10 in

0.15 in

1.2 mm

2.5 mm

3.8 mm

0.05 in

0.10 in

0.15 in

1 mm

.04 in

10 mm

.4 in

100 mm

4 in

1000 mm

40 in

38 mm

1.5 in

75 mm 113 mm 150 mm 190 mm

3.0 in 4.5 in 6.0 in 7.5 in

1 mm

.04 in

10 mm

.4 in

100 mm

4 in

1000 mm

40 in

38 mm

1.5 in

75 mm 113 mm 150 mm 190 mm

3.0 in 4.5 in 6.0 in 7.5 in

DISTANCE

Glass ﬁber opꢀc Diﬀuse mode performance curves are based on a 90% reꢁectance white test card.

Glass Fiber Opꢀc, Infrared (Opposed Mode) Glass Fiber Opꢀc, Infrared (Diﬀuse Mode)

Excess Gain Beam Paꢁern Excess Gain Beam Paꢁern

1000

100

1000

100

Q45F

Opposed Mode

IT23S Fibers

Diffuse Mode

Q45F

Opposed Mode

Q45F

Diffuse Mode

150 mm

6.0 in

3.8 mm

0.15 in

100 mm

50 mm

4.0 in

2.0 in

2.5 mm

1.3 mm

0.10 in

0.05 in

IT23S Fibers

BT13S Fiber

BT23S Fiber

IT13S Fibers

BT23S Fiber

IT13S Fibers

50 mm

100 mm

150 mm

2.0 in

4.0 in

6.0 in

1.3 mm

2.5 mm

3.8 mm

0.05 in

0.10 in

0.15 in

BT13S Fiber

0.01 m

0.03 ft

0.1 m

0.33 ft

1.0 m

3.3 ft

10 m

33 ft

0.4 m

15 in

0.8 m

30 in

1.2 m

45 in

1.6 m

60 in

2.0 m

75 in

1 mm

0.04 in

10 mm

0.4 in

100 mm

4.0 in

1000 mm

40 in

25 mm

1 in

50 mm

2 in

75 mm 100 mm 125 mm

3 in 4 in 5 in

DISTANCE

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 53997 Rev. D

Q45VR3 Series Sensors

Glass Fiber Opꢀc, Visible Red (Opposed Mode)

Excess Gain Beam Paꢁern

Glass Fiber Opꢀc, Visible Red (Diﬀuse Mode)

Excess Gain Beam Paꢁern

1000

100

1000

100

Q45FV

Diffuse Mode

Opposed Mode

Q45FV

Opposed Mode

Q45FV

Diffuse Mode

30 mm

1.2 in

3.0 mm

0.12 in

20 mm

10 mm

0.8 in

0.4 in

2.0 mm

1.0 mm

0.08 in

0.04 in

IT23S Fibers

BT13S Fiber

10 mm

20 mm

30 mm

0.4 in

0.8 in

1.2 in

BT13S

Fiber

IT13S Fibers

1.0 mm

2.0 mm

3.0 mm

0.04 in

0.08 in

0.12 in

BT23S Fiber

1 mm

0.04 in

10 mm

0.4 in

100 mm

4.0 in

1000 mm

40 in

100 mm 150 mm 200 mm 250 mm 300 mm

4 in 6 in 8 in 10 in 12 in

1.0 mm

0.04 in

10 mm

0.4 in

100 mm

4 in

1000 mm

40 in

5 mm

0.2 in

10 mm

0.4 in

15 mm

0.6 in

20 mm 25 mm

0.8 in 1.0 in

DISTANCE

Plasꢀc ﬁber opꢀc Diﬀuse mode performance curves are based on a 90% reꢁectance white test card.

Plasꢀc Fiber Opꢀc (Opposed Mode) Plasꢀc Fiber Opꢀc (Diﬀuse Mode)

Excess Gain Beam Paꢁern Excess Gain Beam Paꢁern

1000

100

1000

100

Q45FP

Opposed Mode

Diffuse Mode

PBT46U Fiber

Q45FP

45 mm

1.8 in

Q45FP

18 mm

0.75 in

Opposed Mode

Diffuse Mode

30 mm

15 mm

1.2 in

0.6 in

PIT46U Fibers

12 mm

6 mm

0.50 in

0.25 in

PBT46U Fiber

PIT46U Fibers

PIT26U Fibers

15 mm

30 mm

45 mm

0.6 in

1.2 in

1.8 in

6 mm

12 mm

18 mm

0.25 in

0.50 in

0.75 in

PIT26U Fibers

PBT26U Fiber

1 mm

0.04 in

10 mm

0.4 in

100 mm

4.0 in

1000 mm

40 in

0.1 mm

0.004 in

1 mm

0.04 in

10 mm

0.4 in

100 mm

4 in

10 mm

0.4 in

20 mm

0.8 in

30 mm

1.2 in

40 mm 50 mm

1.6 in 2.0 in

25 mm

1.0 in

50 mm

2.0 in

75 mm 100 mm 125 mm

3.0 in 4.0 in 5.0 in

DISTANCE

Accessories

Cordsets

3-Pin Mini-Style Cordsets

Model

Length

Style

Dimensions

Pinout (Female)

MBCC-306

1.83 m (6.5 ꢂ)

3.66 m (12 ꢂ)

52 Typ.

7/8-16UN-2B

ø 25.5

MBCC-312

Straight

1 = Black

2 = Brown

3 = Blue

MBCC-330

9.14 m (30 ꢂ)

5-Pin Mini-Style Cordsets

Model

Length

Style

Dimensions

Pinout (Female)

MBCC-506

1.83 m (6 ꢂ)

3.66 m (12 ꢂ)

MBCC-512

52 Typ.

7/8-16UN-2B

ø 25.5

Straight

1 = Black

2 = Blue

MBCC-530

9.14 m (30 ꢂ)

3 = Yellow

4 = Brown

5 = White

P/N 53997 Rev. D

www.bannerengineering.com - Tel: +1-763-544-3164

Q45VR3 Series Sensors

Retroreꢂecꢀve Targets

Banner oﬀers a wide selecꢀon of high-quality retroreꢁecꢀve targets. See

www.bannerengineering.com for complete informaꢀon.

Note: Polarized sensors require corner cube type

retroreꢁecꢀve targets. Non-polarized sensors may use any

retroreꢁecꢀve target.

Brackets

SMB30C

SMB30MM

•

12-ga. stainless steel bracket

•

30 mm split clamp, black PBT

bracket

Stainless steel mounꢀng

hardware included

Mounꢀng hole for 30 mm

with curved mounꢀng slots for

versaꢀle orientaꢀon

Clearance for M6 (¼ in)

hardware

Mounꢀng hole for 30 mm

sensor

•

sensor

Hole center spacing: A=ø 45

Hole size: B=ø 27.2

Hole center spacing: A = 51, A to B = 25.4

Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1

SMB30SC

•

Swivel bracket with 30 mm

mounꢀng hole for sensor

Black reinforced thermoplasꢀc

polyester

Stainless steel mounꢀng and

swivel locking hardware

included

Hole center spacing: A=ø 50.8

Hole size: A=ø 7.0, B=ø 30.0

Output Timing Logic and Signal Strength Display Modules

Q45 sensors easily accept the addiꢀon of output ꢀming logic and signal strength display funcꢀons. Display modules have a seven-

™

element display that gives a more precise indicaꢀon of excess gain than does the AID system LED that is standard on Q45 sensors. The

modules listed below may be used with all Q45VR3 sensors. Refer to the module's datasheet for more informaꢀon.

Models

45LM58

45LM58D

45LMD

Logic and/or Display Funcꢀon

Programmable output ꢀming logic

Programmable output ꢀming logic plus signal strength display

Signal strength display only (no ꢀming funcꢀon)

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 53997 Rev. D

Q45VR3 Series Sensors

Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or

replace, free of charge, any product of its manufacture which, at the ꢀme it is returned to the factory, is found to have been defecꢀve during the warranty period. This warranty does not cover

damage or liability for misuse, abuse, or the improper applicaꢀon or installaꢀon of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discreꢀon of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY

OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT

DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligaꢀons or liabiliꢀes relaꢀng to any product previously

manufactured by Banner Engineering Corp. Any misuse, abuse, or improper applicaꢀon or installaꢀon of this product or use of the product for personal protecꢀon applicaꢀons when the

product is idenꢀﬁed as not intended for such purposes will void the product warranty. Any modiﬁcaꢀons to this product without prior express approval by Banner Engineering Corp will void the

product warranꢀes. All speciﬁcaꢀons published in this document are subject to change; Banner reserves the right to modify product speciﬁcaꢀons or update documentaꢀon at any ꢀme.

Speciﬁcaꢀons and product informaꢀon in English supersede that which is provided in any other language. For the most recent version of any documentaꢀon, refer to:

www.bannerengineering.com.

Q45VR3FVQ [BANNER]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E