QM42VP6FP [BANNER]

QM42 Series Sensor;


型号：	QM42VP6FP
厂家：	Banner Engineering
描述：	QM42 Series Sensor
文件：	总4页 (文件大小：304K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

QM42 Series Sensor

Datasheet

•

Compact, rugged, low cost self-contained sensors in metal die cast housings

Epoxy-encapsulated circuitry; leakproof IP67 (NEMA 6) construcꢀon for harsh environments

Outstanding electrical noise immunity

Dual LED system indicates sensor performance

Choice of integral cable or quick disconnect connector

WARNING: Not To Be Used for Personnel Protecꢀon

Never use this device as a sensing device for personnel protecꢀon. Doing so could lead to

serious injury or death. This device does not include the self-checking redundant circuitry

necessary to allow its use in personnel safety applicaꢀons. A sensor failure or malfuncꢀon can

cause either an energized or de-energized sensor output condiꢀon.

Models

QM42 Opposed Mode Emiꢁer (E) and Receiver (R)

QM42 Diﬀuse Mode

Models

Cable

Output Type

Cable

Output Type

QM426E Emiꢁer

2 m (6.5 ꢂ)

4-pin Euro QD

2 m (6.5 ꢂ)

QM42VN6D

QM42VN6DQ

QM42VP6D

2 m (6.5 ꢂ)

4-pin Euro QD

2 m (6.5 ꢂ)

4-pin Euro QD

NPN

QM426EQ Emiꢁer

QM42VN6R Receiver

QM42VN6RQ Receiver

QM42VP6R Receiver

QM42VP6RQ Receiver

NPN

PNP

4-pin Euro QD

2 m (6.5 ꢂ)

QM42VP6DQ

QM42 Polarized Retroreꢂecꢀve Mode

Models

4-pin Euro QD

Cable

Output Type

QM42 Plasꢀc Fiber Opꢀc Mode

Models

QM42VN6LP

2 m (6.5 ꢂ)

4-pin Euro QD

2 m (6.5 ꢂ)

4-pin Euro QD

NPN

Cable

Output Type

QM42VN6LPQ

QM42VN6FP

2 m (6.5 ꢂ)

4-pin Euro QD

2 m (6.5 ꢂ)

4-pin Euro QD

QM42VP6LP

NPN

PNP

QM42VN6FPQ

QM42VP6FP

QM42VP6LPQ

PNP

To order the 9 m (30 ꢂ) cable models, add the suﬃx "W/30" to the model

number of any cabled sensor (for example, QM42VN6D W/30). Models

with a QD connector require a maꢀng cable.

QM42VP6FPQ

Speciꢃcaꢀons

Sensing Beam

Repeatability

Infrared, 880 nm for opposed and diﬀuse

Diﬀuse and retroreꢃecꢀve modes: 250 microseconds

Opposed Mode: 120 microseconds

Fiber opꢀc mode: 60 microseconds

Visible red, 660 nm for ﬁber opꢀc and retroreꢃecꢀve modes

Supply Voltage and Current

Adjustments

10 to 30 V dc (10% maximum ripple) at less than:

Diﬀuse and retroreꢃecꢀve models: 20 milliamps

Opposed mode: 30 milliamps (emiꢁer), 10 milliamps (receiver)

Fiber opꢀc models: 30 milliamps

All models except emiꢁers: 15-turn sloꢁed brass GAIN (sensiꢀvity) adjustment

potenꢀometer (clutched at both ends of travel)

Indicators

Supply Protecꢀon Circuitry

Two LEDs: green and amber

Protected against reverse polarity and transient voltages

Green solid = power to sensor is on (Opposed emiꢁers: Green power "on")

Green ꢃashing = output is overloaded

Amber solid = light is sensed; normally open output on

Amber ꢃashing = marginal excess gain (1–1.5x) in light condiꢀon

Output Conꢃguraꢀon

SPDT (complementary) solid-state dc switch; Choose NPN (current sinking) or PNP

(current sourcing) models.

Light operate: N.O. output conducts when the sensor sees its own (or the emiꢁer's)

modulated light

Construcꢀon

Housings are die-cast zinc alloy with black epoxy powder paint ﬁnish; lenses are acrylic

Dark operate: N.C. output conducts when the sensor sees dark

Connecꢀons

Output Raꢀng

2 m (6.5 ꢂ) or 9 m (30 ꢂ) aꢁached cable, or 4-pin Euro-style quick-disconnect ﬁꢄng;

Cables for QD models are purchased separately

100 mA maximum (each output)

Oﬀ-state leakage current: < 5 microamps at 30 V dc

On-state saturaꢀon voltage: < 1 V at 10 mA dc; < 1.5 V at 100 mA dc

Original Document

44487 Rev. B

1 May 2017

44487

QM42 Series Sensor

Output Protecꢀon Circuitry

Required Overcurrent Protecꢀon

Protected against false pulse on power-up and conꢀnuous overload or short-circuit of

outputs

WARNING: Electrical connecꢀons must be made by

qualiﬁed personnel in accordance with local and

naꢀonal electrical codes and regulaꢀons.

Overload trip point ≥ 150 mA, typical, at 20 °C

Output Response Time

Diﬀuse and retroreꢃecꢀve modes: 1 millisecond on and oﬀ

Opposed mode: 1 millisecond on, 0.5 millisecond oﬀ

Fiber opꢀc mode: 0.25 millisecond on and oﬀ

Overcurrent protecꢀon is required to be provided by end product applicaꢀon per the

supplied table.

Overcurrent protecꢀon may be provided with external fusing or via Current Limiꢀng,

Class 2 Power Supply.

Environmental Raꢀng

Supply wiring leads < 24 AWG shall not be spliced.

For addiꢀonal product support, go to www.bannerengineering.com.

IP67; NEMA 6

Operaꢀng Condiꢀons

Supply Wiring (AWG)

Required Overcurrent Protecꢀon (Amps)

Temperature: −20 °C to +70 °C (−4 °F to +158 °F)

Relaꢀve Humidity: 90% at +50 °C maximum relaꢀve humidity (non-condensing)

5.0

3.0

2.0

1.0

0.8

0.5

Cerꢀꢃcaꢀons

Performance Curves

Plasꢀc Fiber Opꢀc Mode - Range: 40 mm (1.5 in)

Excess Gain

Beam Paꢁern

Excess Gain

Beam Paꢁern¹

1000

QM42FP

Opposed Mode

QM42FP

6 mm

QM42FP

Opposed Mode

30 mm

1.2 in

0.24 in

QM42FP

Diffuse Mode

4 mm

20 mm

10 mm

0.8 in

0.4 in

0.16 in

0.08 in

2 mm

100

with PIT46U Fibers

10 mm

20 mm

30 mm

0.4 in

0.8 in

1.2 in

2 mm

4 mm

6 mm

0.08 in

0.16 in

0.24 in

with PBT46U Fiber

with PIT46U Fibers

with PBT46U Fiber

20 mm

0.8 in

40 mm

1.6 in

60 mm

2.4 in

80 mm 100 mm

3.2 in 4.0 in

10 mm

0.4 in

20 mm

0.8 in

30 mm

1.2 in

40 mm 50 mm

1.6 in 2.0 in

DISTANCE

0.1 mm

0.004 in

1 mm

0.04 in

10 mm

0.4 in

100 mm

4.0 in

1 mm

0.04 in

10 mm

0.4 in

100 mm

4.0 in

1000 mm

40 in

DISTANCE

Opposed Mode - Range: 10 m (33 ꢄ)

Diﬀuse Mode - Range: 400 mm (16 in)

Excess Gain

Beam Paꢁern (Eﬀecꢀve beam: 8

Excess Gain

Beam Paꢁern²

mm)

1000

QM42D

Diffuse Mode

QM42E/R

Opposed Mode

300 mm

12 in

QM42D

30 mm

1.2 in

QM42E/R

200 mm

100 mm

8 in

4 in

20 mm

10 mm

0.8 in

0.4 in

Diffuse Mode

Opposed Mode

100

100 mm

200 mm

300 mm

4 in

8 in

12 in

10 mm

20 mm

30 mm

0.2 in

0.4 in

0.6 in

100 mm 200 mm 300 mm 400 mm 500 mm

4 in 8 in 12 in 16 in 20 in

2 m

6.5 ft

4 m

13 ft

6 m

19.5 ft

8 m

26 ft

10 m

32.5 ft

DISTANCE

1 mm

.04 in

10 mm

.4 in

100 mm

4 in

1000 mm

40 in

.1 m

.33 ft

1 m

3.3 ft

10 m

33 ft

100 m

330 ft

DISTANCE

Diﬀuse mode performance is based on a 90% reꢃectance white test card.

Performance is based on a 90% reꢃectance white test card.

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 44487 Rev. B

QM42 Series Sensor

Polarized Retroreꢂecꢀve Mode - Range: 3 m (10 ꢄ)

Excess Gain Beam Paꢁern

1000

QM42LP

Retroreflective Mode

QM42LP

Retroreflective Mode

60 mm

40 mm

20 mm

2.4 in

1.6 in

0.8 in

100

20 mm

40 mm

60 mm

0.8 in

1.6 in

2.4 in

with BRT-3 Reflector

0.75 m

2.5 ft

1.5 m

5.0 ft

2.25 m

7.5 ft

3.0 m

10.0 ft

3.75 m

12.5 ft

DISTANCE

.1 m

.33 ft

1 m

3.3 ft

10 m

33 ft

100 m

330 ft

DISTANCE

Dimensions

Cabled Diﬀuse, Opposed, and Retroreꢂecꢀve Models

Quick Disconnect Models

Quick Disconnect FP Models

QM42FP Models

12.7 mm

(0.50 in)

Cutoff Distance Adjustment

Green LED Power Indicator

Amber LED

Output/Marginal Indicator

(Except emitters)

60.2 mm

(2.37 in)

ø 3.2 mm

(0.125 in)

(4 Holes)

42.0 mm

(1.65 in)

M12 x 1 x 18 mm

Euro-style

42.0 mm

(1.65 in)

10.0 mm (0.39 in)

23.9 mm (2)

(0.94 in)

45.9 mm

(1.81 in)

12.3 mm (0.48 in)

27.1 mm (2)

(1.07 in)

42.0 mm

(1.65 in)

48.5 mm

(1.91 in)

Threaded M4 x 0.7

Mounting Holes

Wiring Diagrams

Sensors with NPN Outputs

Sensors with PNP Outputs

Key

1 - brown

2 - white

3 - blue

–

10-30V dc

–

4 - black

Load

DC Emiꢁers

Cabled Models

Quick Disconnect Models

Key

1 - brown

2 - white

3 - blue

10–30 V dc

–

−

10-30V dc

4 - black

Cabled models are shown. Quick disconnect (QD) wiring diagrams are funcꢀonally idenꢀcal.

P/N 44487 Rev. B

www.bannerengineering.com - Tel: +1-763-544-3164

QM42 Series Sensor

Accessories

4-Pin Euro-Style Cordsets

4-Pin Threaded M12/Euro-Style Cordsets

Model

Length

Style

Dimensions

Pinout (Female)

MQDC-406

MQDC-415

MQDC-430

1.83 m (6 ꢂ)

4.57 m (15 ꢂ)

9.14 m (30 ꢂ)

44 Typ.

Straight

M12 x 1

MQDC-450

15.2 m (50 ꢂ)

ø 14.5

MQDC-406RA

MQDC-415RA

MQDC-430RA

1.83 m (6 ꢂ)

4.57 m (15 ꢂ)

9.14 m (30 ꢂ)

32 Typ.

[1.26"]

1 = Brown

2 = White

3 = Blue

30 Typ.

[1.18"]

Right-Angle

4 = Black

MQDC-450RA

15.2 m (50 ꢂ)

M12 x 1

ø 14.5 [0.57"]

Brackets

All measurements are listed in millimeters [inches], unless noted

otherwise.

24.1 mm R

(0.95 in)

SMB19

•

Right-angle mounꢀng

15º

4.32 mm

31.8 mm

Slot (2)

20.3 mm

(0.80 in)

bracket with a curved slot

(1.25 in)

(0.170 in)

for versaꢀle orientaꢀon

3.05 mm Slot

(0.120 in)

ø 3.05 mm

(0.120 in)

20.1 mm

(0.79 in)

2.5 mm

(0.10 in)

45.5 mm

(1.79 in)

Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any

product of its manufacture which, at the ꢀme it is returned to the factory, is found to have been defecꢀve during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the

improper applicaꢀon or installaꢀon of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discreꢀon of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR

ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO

USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligaꢀons or liabiliꢀes relaꢀng to any product previously manufactured by Banner

Engineering Corp. Any misuse, abuse, or improper applicaꢀon or installaꢀon of this product or use of the product for personal protecꢀon applicaꢀons when the product is idenꢀﬁed as not intended for such purposes

will void the product warranty. Any modiﬁcaꢀons to this product without prior express approval by Banner Engineering Corp will void the product warranꢀes. All speciﬁcaꢀons published in this document are subject

to change; Banner reserves the right to modify product speciﬁcaꢀons or update documentaꢀon at any ꢀme. Speciﬁcaꢀons and product informaꢀon in English supersede that which is provided in any other language.

For the most recent version of any documentaꢀon, refer to: www.bannerengineering.com.

QM42VP6FP [BANNER]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E