QMT42VN6AFV400Q [BANNER]

QMT42 Series 400 mm Adjustable Field Sensors;


型号：	QMT42VN6AFV400Q
厂家：	Banner Engineering
描述：	QMT42 Series 400 mm Adjustable Field Sensors
文件：	总4页 (文件大小：827K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

QMT42 Series Long-Range Diffuse Sensors

Datasheet

Adjustable sensing distance up to 6 meters (20 inches)

•

Powerful, collimated infrared light source and special lensing for reliable long-range

detection of even the darkest objects

•

Low-cost, compact, rugged sensors in metal die-cast housings

Leakproof IP67 (NEMA 6) construction for reliable sensing in harsh environments

Outstanding electrical noise immunity

Dual LED system indicates sensor performance

Choice of unterminated cable or quick-disconnect connector

WARNING: Not To Be Used for Personnel Protection

Never use this device as a sensing device for personnel protection. Doing so could lead to

serious injury or death. This device does not include the self-checking redundant circuitry necessary

to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an

energized or de-energized sensor output condition.

Models

Range

Cable

Supply Voltage

Output Type

QMT42VN6DX

QMT42VN6DXQ

QMT42VP6DX

QMT42VP6DXQ

2 m (6.5 ft)

4-pin Euro QD

2 m (6.5 ft)

4-pin Euro QD

NPN

10 mm (0.4 in) to 6 m

(20 ft)

10 V dc to 30 V dc

PNP

Wiring

Sensors with NPN Outputs

Sensors with PNP Outputs

Cabled Models

Quick-Disconnect Models

Cabled Models

Quick-Disconnect Models

10-30V dc

Load

Original Document

57890 Rev. A

19 May 2016

57890

QMT42 Series Long-Range Diffuse Sensors

Specifications

Sensing Beam

Adjustments

Infrared, 880 nm

4-turn slotted Gain (sensitivity) adjustment potentiometer

(clutched at both ends of travel)

Supply Voltage and Current

Range

10 mm (0.4 in) to 6 m (20 ft)

Indicators

10 to 30 V dc (10% max. ripple) at less than 40 mA

Supply Protection Circuitry

Protected against reverse polarity and transient voltages

Two LEDs: Green and Amber

Output Configuration

Green on steady = power to sensor is ON

Green flashing = output is overloaded

Amber on steady = light is sensed; normally open output ON

Amber flashing = marginal excess gain (1-1.5x) in light

condition

SPDT (complementary) solid-state dc switch; choose NPN or

PNP models

Light operate: N.O. output conducts when the sensor sees its

own modulated light

Dark operate: N.C. output conducts when the sensor sees dark

Construction

Output Rating

Housings are die-cast zinc alloy with black acrylic polyurethane

finish; lenses are acrylic

100 mA maximum (each output)

OFF-state leakage current: < 5 microamps at 30 V dc

ON-state saturation voltage: < 1 V at 10 mA dc; < 1.5 V at

100 mA dc

Environmental Rating

IEC IP67

NEMA 6

Output Protection Circuitry

Protected against false pulse on power-up and continuous

overload or short-circuit of outputs

Overload trip point ≥ 130 mA, typical, at 20 ºC

Connections

2 m (6.5 ft) or 9 m (30 ft) attached cable, or 4-pin M12/Euro-

style quick-disconnect fitting; cables for QD models are

purchased separately

Output Response Time

1 millisecond on and off

Operating Conditions

−20 °C to +55 °C (−4 °F to +131°F)

90% at +50 °C maximum relative humidity (non-condensing)

NOTE: 100 millisecond delay on

power-up; outputs are non-conducting

during this time

Certification

Repeatability of Response

250 microseconds

Sensing Hysteresis

Less than 20% of set sensing distance

Performance

The performance is based on a 90% reflective white test card.

1000

QMT42DX

Diffuse Mode

QMT42DX

Diffuse Mode

30 mm

20 mm

10 mm

1.2 in

0.8 in

0.4 in

100

10 mm

20 mm

30 mm

0.4 in

0.8 in

1.2 in

1.5 m

5 ft

3.0 m

10 ft

4.5 m

15 ft

6.0 m

20 ft

7.5 m

25 ft

0.01 m

0.033 ft

0.1 m

0.33 ft

1.0 m

3.3 ft

10 m

33 ft

DISTANCE

Figure 1. Excess Gain

Figure 2. Beam Pattern

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 57890 Rev. A

QMT42 Series Long-Range Diffuse Sensors

Dimensions

18.0 mm

(0.71")

Green LED Power/Overload Indicator

Yellow LED

19.2 mm

(0.76")

Output/Marginal Indicator

ø 3.2 mm

(0.125")

(4 Holes)

Sensitivity

Control

58.0 mm

(2.28")

2 x 3.1mm

(0.12")

10.0 mm (0.39")

12.3 mm (0.48")

2 x 3.1mm

(0.12")

76.2 mm

(3.00")

23.9 mm (2)

(0.94")

M12 x 1 x 18 mm

Euro-style

27.1 mm (2)

(1.07")

42.0 mm

(1.65")

Threaded M4 x 0.7

Mounting Holes

Figure 3. Cabled Models

Figure 4. Quick-Disconnect Models

Figure 5. Sensitivity Control

All measurements are listed in millimeters (inches), unless noted otherwise.

Accessories

Quick-Disconnect (QD) Cables

4-Pin Threaded M12/Euro-Style Cordsets

Model

Length

Style

Dimensions

Pinout (Female)

MQDC-406

MQDC-415

MQDC-430

1.83 m (6 ft)

4.57 m (15 ft)

9.14 m (30 ft)

44 Typ.

Straight

M12 x 1

MQDC-450

15.2 m (50 ft)

ø 14.5

MQDC-406RA

MQDC-415RA

MQDC-430RA

1.83 m (6 ft)

4.57 m (15 ft)

9.14 m (30 ft)

32 Typ.

[1.26"]

1 = Brown

2 = White

3 = Blue

30 Typ.

[1.18"]

Right-Angle

4 = Black

MQDC-450RA

15.2 m (50 ft)

M12 x 1

ø 14.5 [0.57"]

Mounting Brackets

SMB42T

SMB42L

•

Stainless steel 2-axis

side-mounting bracket

•

13-ga. stainless steel

Hardware included

•

Nut strap included for

replacing two M3

mounting nuts

Hole center spacing: A = 20.3, B to C = 24.1

Hole size: A = ø 4.3 × 20°, B = ø 3.0, C = ø 3.0 × 30°

Hole center spacing: A = 10.0, B = 25.4

Hole size: A = ø 3.4, B = ø 2.5

P/N 57890 Rev. A

www.bannerengineering.com - Tel: +1-763-544-3164

QMT42 Series Long-Range Diffuse Sensors

SMB42F

SMB42U

•

13-ga. stainless steel

Hardware included

•

13-ga. stainless steel

Hardware included

Hole center spacing: A = 10.0, B = 25.4

Hole size: A = ø 3.4, B = ø 2.5

Hole center spacing: A = 30.0, B = 25.4

Hole size: A = ø 3.4, B = ø 2.5

Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.

will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty

period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,

ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE

OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE

LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL,

CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER

ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product

previously manufactured by Banner Engineering Corp.

Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not

intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product

warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any

time. For the most recent version of any documentation, refer to: www.bannerengineering.com.

www.bannerengineering.com - Tel: +1-763-544-3164

相关型号：