QT50R-AFH [BANNER]
R-GAGE® QT50R-AFH Sensor;型号: | QT50R-AFH |
厂家: | Banner Engineering |
描述: | R-GAGE® QT50R-AFH Sensor |
文件: | 总7页 (文件大小:1776K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
®
R-GAGE QT50R-AFH Sensor
Datasheet
Radar-Based Sensors for Detecꢀon of Moving and Staꢀonary Targets
•
•
•
•
•
FMCW (true-presence) radar detects moving and staꢀonary objects
Higher sensiꢀvity and longer range
Adjustable sensing field — ignores objects beyond setpoint
Easy setup and configuraꢀon of range, sensiꢀvity, and output with simple DIP switches
Sensing funcꢀons are unaffected by wind, falling rain or snow, fog, humidity, air
temperatures, or light
•
•
Sensor operates in Industrial, Scienꢀfic, and Medical (ISM) telecommunicaꢀon band
Rugged IP67 housing withstands harsh environments
Protected by US patents
CAUTION: Make No Modiꢀcaꢁons to this Product
Any modificaꢀons to this product not expressly approved by Banner Engineering could void the user's authority to
operate the product. Contact Banner Engineering for more informaꢁon.
WARNING: Not To Be Used for Personnel Protecꢁon
Never use this device as a sensing device for personnel protecꢁon. Doing so could lead to serious injury or death.
This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety
applicaꢀons. A sensor failure or malfuncꢀon can cause either an energized or de-energized sensor output
condiꢀon.
Models
Maximum
Range
1
2
Models
Connecꢁon
Supply Voltage Telecom Approval
Output
QT50R-US-AFH
QT50R-EU-AFH
Telecom approved for US, Canada and Brazil
12 to 30 V dc
Telecom approved for Europe, UK, Australia,
New Zealand, China, and Japan
Bipolar NPN/PNP
5-wire 2 m
(6.5 ꢁ)
Integral cable
24 m (78 ꢁ)
DIP-switch-selectable
N.O. or N.C.
QT50R-KR-AFH
QT50R-TW-AFH
QT50R-SG-AFH
12 to 24 V dc
12 to 30 V dc
Telecom approved for South Korea
Telecom approved for Taiwan
Telecom approved for Singapore
1
Cabled models only are listed. For integral 5-pin Euro-style (M12) quick-disconnect fiꢂng, add suffix "Q" to the model number (e.g., QT50R-xx-
AFHQ). QD models require a maꢀng cordset; see Quick Disconnect (QD) Cordsets on page 6.
For addiꢀonal countries, contact Banner Engineering.
2
Original Document
162359 Rev. H
23 October 2017
162359
®
R-GAGE QT50R-AFH Sensor
Overview
The R-GAGE sensor emits a well-defined beam of high-frequency radio waves
from an internal antenna. Some of this emiꢃed energy reflects back to the
receiving antenna. Signal processing electronics in the sensor determine the
distance from the sensor to the object based on the ꢀme delay of the return
signal. The sensor can be configured (via DIP switches) to sense objects up to
a specific distance, ignoring objects beyond this distance (also called
background suppression).
Setpoint
Figure 2. R-Gage Features
1. Power LED: Green (power ON)
2. Signal Strength LED: Red (flashes in
proporꢀon to the signal strength)
X
Y
3. Output LEDs: Yellow (output energized); Red
(configuraꢀon)
D
Access the DIP switches behind the threaded cap on
the sensor back (not shown)
Figure 1. R-GAGE Setpoint
R-GAGE setpoint distances, minimum and maximum (sensor will detect objects up to setpoint and ignore objects beyond the setpoint)
EU, KR Models
2 m (6.6 ꢁ)
TW, US Models
3.5 m (11.5 ꢁ)
24 m (78.7 ꢁ)
X
Y
Minimum setpoint distance
Maximum setpoint distance
Dead Zone3
24 m (78.7 ꢁ)
D
Sensor Conꢀguraꢁon
The sensing zone distance, sensiꢀvity, and output configuraꢀon can be selected via the DIP switches on the back of the sensor. Use the
included spanner to open the screw-off cover on the back of the sensor and access the DIP switches.
Important: Tighten the DIP switch cover a full quarter turn aꢁer contact to maintain the waterꢀght seal.
DIP Switch Funcꢁons
Switch
1, 2, 3
4, 5
Funcꢁon
Sensing distance (detects objects from sensor face to this point)
Sensiꢀvity (higher sensiꢀvity sees weaker objects and has a larger beam paꢃern)
Normally open/normally closed output funcꢀonality
Response Speed
6
7, 8
DIP switch 1 is on the leꢁ and DIP switch 8 is on the right.
Distance Seꢂngs
* Default seꢂngs
3
Typical dead zone: 0.4 m (1.3 ꢁ) for moving and 1.0 m (3.3 ꢁ) for staꢀonary targets, but varies with target reflecꢀvity
2
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 162359 Rev. H
®
R-GAGE QT50R-AFH Sensor
Distance
Switch 1
Switch 2
Switch 3
EU, KR Models
2 m (6.6 ꢁ)
TW, US Models
3.5 m (11.5 ꢁ)
4 m (13.1 ꢁ)
5 m (16.4 ꢁ)
6 m (19.7 ꢁ)
8 m (26.2 ꢁ)
12 m (39.4 ꢁ)
16 m (52.5 ꢁ)
24 m (78.7 ꢁ)
0
0
0
0
0
1
3 m (9.8 ꢁ)
0
1
0
4 m (13.1 ꢁ)
6 m (19.7 ꢁ)
8 m (26.2 ꢁ)
12 m (39.4 ꢁ)
16 m (52.5 ꢁ)
24 m (78.7 ꢁ)
0
1
1
1*
1
0*
0
0*
1
1
1
0
1
1
1
Note: Highest sensiꢀvity is achieved only if sensing distance is 8 m (26.2 ꢁ) or less.
Note: Near-field sensiꢀvity boost is enabled when set to 4 m (13.1 ꢁ) or less.
Sensiꢁvity Selecꢁon
Switch 4
Switch 5
Sensiꢁvity
4 (Highest)
3 (High)
0*
0
0*
1
1
0
2 (Medium)
1 (Low)
1
1
* Default seꢂngs
Note: Use the sensiꢀvity selecꢀon to ignore unwanted weak reflecꢀons within the field of view, and not to narrow
the beam width. Narrow-beam R-GAGE sensor models are available.
Output Conꢀguraꢁon
* Default seꢂngs
Switch 6
NO/NC
NO
0*
1
NC
Response Speed
Switch 7
Switch 8
On Total (ms)
Off Total (ms)
Total (ms)
100
0
0*
1
0
1*
0
30
50
70
300
350
30
1000
6000
1030
1
1
120
6120
* Default seꢂngs
P/N 162359 Rev. H
www.bannerengineering.com - Tel: +1-763-544-3164
3
®
R-GAGE QT50R-AFH Sensor
Speciꢀcaꢁons
Range
Indicators
Power LED: Green (power ON)
The sensor is able to detect a proper object (see Detectable Objects) from 1 to
24 m (3.3 to 78.7 ꢁ), depending on target
Signal Strength LED: Red, flashes in proporꢀon to signal strength. Steady on at
4x excess gain. Only indicates signal amplitude, not target distance.
Output LEDs: Yellow (output energized) / Red (configuraꢀon)
See Figure 2 on page 2
Detectable Objects
Objects containing metal, water, or similar high-dielectric materials
Operaꢁng Principle
Adjustments
Frequency modulated conꢀnuous-wave (FMCW) radar
DIP-switch-configurable sensing distance, sensiꢀvity, response ꢀme, and
output configuraꢀon
Operaꢁng Frequency
US, TW Models: 24.075–24.175 GHz, ISM Band
Construcꢁon
EU, KR, SG Models: 24.050-24.250 GHz, ISM Band
Housing: ABS/polycarbonate
Lightpipes: Acrylic
Maximum Output Power
ERP: 3.3 mW, 5 dBm
Access Cap: Polyester
EIRP: 100 mW, 20 dBm
Operaꢁng Temperature
−40 °C to +65 °C (−40 °F to +149 °F)
Supply Voltage
12 to 30 V dc, less than 100 mA, exclusive of load
For KR models: 12 to 24 V dc, less than 100 mA exclusive of load
Environmental Raꢁng
IEC IP67
Supply Protecꢁon Circuitry
Connecꢁons
Protected against reverse polarity and transient overvoltages
Integral 5-wire 2 m (6.5 ꢁ) cable or M12 Euro-style QD fiꢂng. QD models
require a maꢀng cordset
Delay at Power-up
Less than 2 seconds
Cerꢁꢀcaꢁons
Output Conꢀguraꢁon
Bipolar NPN/PNP output, 150mA; DIP switch 6 selects N.O. (default) or N.C.
ETSI/EN 300 440
FCC part 15
operaꢀon
Output Protecꢁon
RSS-210
Protected against short circuit condiꢀons
ANATEL Category II
CMIIT Category G
ARIB STD T-73
KC mark - MSIP/RRA
NCC
IDA Singapore
Response Time
DIP switches 7 & 8 select ON/OFF response ꢀme
for others, contact Banner Engineering
Country of Origin: USA
FCC ID: UE3QT50RUS—This device complies with Part 15 of the FCC Rules. Operaꢀon is subject to the following two condiꢀons: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operaꢀon.
IC: 7044A-QT50RCA—This device complies with Industry Canada license-exempt RSS standard(s). Operaꢀon is subject to the following
two condiꢀons: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that
may cause undesired operaꢀon of the device.
Cet appareil est conforme aux CNR exempts de licence d'Industrie Canada. Son foncꢀonnement est soumis aux deux condiꢀons
suivantes:(1) Ce disposiꢀf ne peut causer des interférences; et(2) Ce disposiꢀf doit accepter toute interférence, y compris les
interférences qui peuvent entraîner un mauvais foncꢀonnement de l'appareil.
Este equipamento opera em caráter secundário, isto é, não tem direito à proteção
contra interferência prejudicial, mesmo de estações do mesmo ꢀpo e não pode
causar interferência a sistemas operando em caráter primário.
SRD24-IO3B24100.2TR0.1 South Korea Class A Cerꢀficaꢀon
A
(
)
(A
)
,
.
4
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 162359 Rev. H
®
R-GAGE QT50R-AFH Sensor
Beam Paꢃern
Typical Beam Paꢃern (with BRTR-CC20E Radar Target, Radar Cross Secꢁon = 50
m )
Typical Beam Paꢃern (with 4 different targets) at highest sensiꢁvity level
Leꢁ-Right Beam Paꢃern
2
Leꢁ-Right Beam Paꢃern
20 m
20 m
Target 4
Sensitivity 4
Sensitivity 1
Target 1
4
10 m
10 m
4
3
3
2
2
1
1
0 m
0 m
10 m
20 m
10 m
20 m
0
10 m
20 m
30 m
40 m
0
10 m
20 m
30 m
40 m
Distance
Distance
2
1–4: Indicates sensiꢀvity level
1: Weak Object (Radar cross secꢀon = 0.25 m )
2: Car (Radar cross secꢀon = 3 m )
2
2
3: Large Truck (Radar cross secꢀon = 50 m )
2
4: Passenger Train (Radar cross secꢀon = 300 m )
Note: The effecꢀve beam paꢃern depends on the sensiꢀvity level and target properꢀes.
Dimensions
74.1 mm
(2.92")
46.1 mm
(1.82")
37.0 mm
(1.46")
4X Ø4.4 mm
(Ø 0.17")
38.1 mm
(1.50")
33.0 mm
(1.30")
50.8 mm
(2.00")
66.0 mm
(2.60")
19.7 mm
(0.78")
R45.0 mm
(R1.77")
37.0 mm
(1.46")
34.2 mm
(1.35")
M30 X 1.5
ISO-6g
50.8 mm
(2.00")
Windows
The R-GAGE sensor can be placed behind a glass or a plasꢀc window, but the configuraꢀon must be tested and the distance from the
sensor to the window must be determined and controlled prior to installaꢀon. There is typically a 20% signal reducꢀon when the sensor
is placed behind a window.
Polycarbonate at 4 mm thickness performs well in most situaꢀons, but the performance depends on filler materials. Thinner (1 to 3 mm)
windows have high reflecꢀon. The amount of reflecꢀon depends on the material, thickness, and distance from the sensor to the
window.
P/N 162359 Rev. H
www.bannerengineering.com - Tel: +1-763-544-3164
5
®
R-GAGE QT50R-AFH Sensor
Locate the sensor in a posiꢀon of minimum reflecꢀon from the window, which will repeat every 6.1 mm of distance between the sensor
and the window. The posiꢀons of maximum reflecꢀon from the window repeat between the minimums, and decrease in effect unꢀl the
window is approximately 150 mm (5.9 in) away. Consult the factory for pre-tested window materials which can be used at any distance
without issue.
Addiꢀonally, the face of the window should be protected from flowing water and ice by use of a flow diverter or hood directly above the
window. Falling rain or snow in the air in front of the window, light water mist, or small beads on the face of the window are typically
not an issue. However, a thick, conꢀnuous surface of water or ice directly on the face of the window can be detected as a dielectric
boundary.
Wiring
Wiring Key:
1
+
1 = Brown
12-30V dc
3
–
2 = White
2
Load 1
3 = Blue
4
Load 2
4 = Black
5
shield (QD cordset)
5 = Gray (Do not connect)
Note: Banner recommends that the shield wire (QD cordsets only) be connected to earth ground or dc common.
Shielded cordsets are recommended for all QD models.
Accessories
Quick Disconnect (QD) Cordsets
5-Pin Threaded M12/Euro-Style Cordsets—with Shield
Model
Length
Style
Dimensions
Pinout (Female)
MQDEC2-506
MQDEC2-515
MQDEC2-530
1.83 m (6 ꢁ)
4.57 m (15 ꢁ)
9.14 m (30 ꢁ)
44 Typ.
Straight
2
M12 x 1
1
4
ø 14.5
MQDEC2-550
15.2 m (50 ꢁ)
3
5
MQDEC2-506RA
MQDEC2-515RA
MQDEC2-530RA
1.83 m (6 ꢁ)
4.57 m (15 ꢁ)
9.14 m (30 ꢁ)
32 Typ.
[1.26"]
1 = Brown
2 = White
3 = Blue
4 = Black
5 = Gray
30 Typ.
[1.18"]
Right-Angle
MQDEC2-550RA
15.2 m (50 ꢁ)
M12 x 1
ø 14.5 [0.57"]
Note: Pin 5 is not used.
Mounꢁng Brackets
All measurements are in mm
6
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 162359 Rev. H
®
R-GAGE QT50R-AFH Sensor
SMB30SC
SMB30MM
67
•
Swivel bracket with 30 mm
•
12-ga. stainless steel bracket
57
70
B
mounꢀng hole for sensor
with curved mounꢀng slots for
versaꢀle orientaꢀon
•
•
Black reinforced thermoplasꢀc
polyester
Stainless steel mounꢀng and
swivel locking hardware
included
58
C
•
•
Clearance for M6 (¼ in)
57
hardware
B
Mounꢀng hole for 30 mm
sensor
A
29
A
Hole center spacing: A=ø 50.8
Hole size: A=ø 7.0, B=ø 30.0
Hole center spacing: A = 51, A to B = 25.4
Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1
Weather Deflector
QT50RCK
•
•
Required if the R-GAGE is exposed to rain or snow
Prevents buildup of water or ice from interfering with sensor
performance
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or
replace, free of charge, any product of its manufacture which, at the ꢀme it is returned to the factory, is found to have been defecꢀve during the warranty period. This warranty does not cover
damage or liability for misuse, abuse, or the improper applicaꢀon or installaꢀon of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discreꢀon of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY
OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT
DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligaꢀons or liabiliꢀes relaꢀng to any product previously
manufactured by Banner Engineering Corp. Any misuse, abuse, or improper applicaꢀon or installaꢀon of this product or use of the product for personal protecꢀon applicaꢀons when the
product is idenꢀfied as not intended for such purposes will void the product warranty. Any modificaꢀons to this product without prior express approval by Banner Engineering Corp will void the
product warranꢀes. All specificaꢀons published in this document are subject to change; Banner reserves the right to modify product specificaꢀons or update documentaꢀon at any ꢀme.
Specificaꢀons and product informaꢀon in English supersede that which is provided in any other language. For the most recent version of any documentaꢀon, refer to:
www.bannerengineering.com.
©
Banner Engineering Corp. All rights reserved
相关型号:
©2020 ICPDF网 联系我们和版权申明