QT50R-SG-AFH [BANNER]

R-GAGEÂ® QT50R-AFH Sensor;


型号：	QT50R-SG-AFH
厂家：	Banner Engineering
描述：	R-GAGEÂ® QT50R-AFH Sensor
文件：	总7页 (文件大小：1776K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

R-GAGE QT50R-AFH Sensor

Datasheet

Radar-Based Sensors for Detecꢀon of Moving and Staꢀonary Targets

•

FMCW (true-presence) radar detects moving and staꢀonary objects

Higher sensiꢀvity and longer range

Adjustable sensing ﬁeld — ignores objects beyond setpoint

Easy setup and conﬁguraꢀon of range, sensiꢀvity, and output with simple DIP switches

Sensing funcꢀons are unaﬀected by wind, falling rain or snow, fog, humidity, air

temperatures, or light

•

Sensor operates in Industrial, Scienꢀﬁc, and Medical (ISM) telecommunicaꢀon band

Rugged IP67 housing withstands harsh environments

Protected by US patents

CAUTION: Make No Modiꢀcaꢁons to this Product

Any modiﬁcaꢀons to this product not expressly approved by Banner Engineering could void the user's authority to

operate the product. Contact Banner Engineering for more informaꢁon.

WARNING: Not To Be Used for Personnel Protecꢁon

Never use this device as a sensing device for personnel protecꢁon. Doing so could lead to serious injury or death.

This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety

applicaꢀons. A sensor failure or malfuncꢀon can cause either an energized or de-energized sensor output

condiꢀon.

Models

Maximum

Range

Models

Connecꢁon

Supply Voltage Telecom Approval

Output

QT50R-US-AFH

QT50R-EU-AFH

Telecom approved for US, Canada and Brazil

12 to 30 V dc

Telecom approved for Europe, UK, Australia,

New Zealand, China, and Japan

Bipolar NPN/PNP

5-wire 2 m

(6.5 ꢁ)

Integral cable

24 m (78 ꢁ)

DIP-switch-selectable

N.O. or N.C.

QT50R-KR-AFH

QT50R-TW-AFH

QT50R-SG-AFH

12 to 24 V dc

12 to 30 V dc

Telecom approved for South Korea

Telecom approved for Taiwan

Telecom approved for Singapore

Cabled models only are listed. For integral 5-pin Euro-style (M12) quick-disconnect ﬁꢂng, add suﬃx "Q" to the model number (e.g., QT50R-xx-

AFHQ). QD models require a maꢀng cordset; see Quick Disconnect (QD) Cordsets on page 6.

For addiꢀonal countries, contact Banner Engineering.

Original Document

162359 Rev. H

23 October 2017

162359

R-GAGE QT50R-AFH Sensor

Overview

The R-GAGE sensor emits a well-deﬁned beam of high-frequency radio waves

from an internal antenna. Some of this emiꢃed energy reﬂects back to the

receiving antenna. Signal processing electronics in the sensor determine the

distance from the sensor to the object based on the ꢀme delay of the return

signal. The sensor can be conﬁgured (via DIP switches) to sense objects up to

a speciﬁc distance, ignoring objects beyond this distance (also called

background suppression).

Setpoint

Figure 2. R-Gage Features

1. Power LED: Green (power ON)

2. Signal Strength LED: Red (ﬂashes in

proporꢀon to the signal strength)

3. Output LEDs: Yellow (output energized); Red

(conﬁguraꢀon)

Access the DIP switches behind the threaded cap on

the sensor back (not shown)

Figure 1. R-GAGE Setpoint

R-GAGE setpoint distances, minimum and maximum (sensor will detect objects up to setpoint and ignore objects beyond the setpoint)

EU, KR Models

2 m (6.6 ꢁ)

TW, US Models

3.5 m (11.5 ꢁ)

24 m (78.7 ꢁ)

Minimum setpoint distance

Maximum setpoint distance

Dead Zone³

24 m (78.7 ꢁ)

Sensor Conꢀguraꢁon

The sensing zone distance, sensiꢀvity, and output conﬁguraꢀon can be selected via the DIP switches on the back of the sensor. Use the

included spanner to open the screw-oﬀ cover on the back of the sensor and access the DIP switches.

Important: Tighten the DIP switch cover a full quarter turn aꢁer contact to maintain the waterꢀght seal.

DIP Switch Funcꢁons

Switch

1, 2, 3

4, 5

Funcꢁon

Sensing distance (detects objects from sensor face to this point)

Sensiꢀvity (higher sensiꢀvity sees weaker objects and has a larger beam paꢃern)

Normally open/normally closed output funcꢀonality

Response Speed

7, 8

DIP switch 1 is on the leꢁ and DIP switch 8 is on the right.

Distance Seꢂngs

* Default seꢂngs

Typical dead zone: 0.4 m (1.3 ꢁ) for moving and 1.0 m (3.3 ꢁ) for staꢀonary targets, but varies with target reﬂecꢀvity

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 162359 Rev. H

R-GAGE QT50R-AFH Sensor

Distance

Switch 1

Switch 2

Switch 3

EU, KR Models

2 m (6.6 ꢁ)

TW, US Models

3.5 m (11.5 ꢁ)

4 m (13.1 ꢁ)

5 m (16.4 ꢁ)

6 m (19.7 ꢁ)

8 m (26.2 ꢁ)

12 m (39.4 ꢁ)

16 m (52.5 ꢁ)

24 m (78.7 ꢁ)

3 m (9.8 ꢁ)

4 m (13.1 ꢁ)

6 m (19.7 ꢁ)

8 m (26.2 ꢁ)

12 m (39.4 ꢁ)

16 m (52.5 ꢁ)

24 m (78.7 ꢁ)

Note: Highest sensiꢀvity is achieved only if sensing distance is 8 m (26.2 ꢁ) or less.

Note: Near-ﬁeld sensiꢀvity boost is enabled when set to 4 m (13.1 ꢁ) or less.

Sensiꢁvity Selecꢁon

Switch 4

Switch 5

Sensiꢁvity

4 (Highest)

3 (High)

2 (Medium)

1 (Low)

* Default seꢂngs

Note: Use the sensiꢀvity selecꢀon to ignore unwanted weak reﬂecꢀons within the ﬁeld of view, and not to narrow

the beam width. Narrow-beam R-GAGE sensor models are available.

Output Conꢀguraꢁon

* Default seꢂngs

Switch 6

NO/NC

Response Speed

Switch 7

Switch 8

On Total (ms)

Oﬀ Total (ms)

Total (ms)

100

300

350

1000

6000

1030

120

6120

* Default seꢂngs

P/N 162359 Rev. H

www.bannerengineering.com - Tel: +1-763-544-3164

R-GAGE QT50R-AFH Sensor

Speciꢀcaꢁons

Range

Indicators

Power LED: Green (power ON)

The sensor is able to detect a proper object (see Detectable Objects) from 1 to

24 m (3.3 to 78.7 ꢁ), depending on target

Signal Strength LED: Red, ﬂashes in proporꢀon to signal strength. Steady on at

4x excess gain. Only indicates signal amplitude, not target distance.

Output LEDs: Yellow (output energized) / Red (conﬁguraꢀon)

See Figure 2 on page 2

Detectable Objects

Objects containing metal, water, or similar high-dielectric materials

Operaꢁng Principle

Adjustments

Frequency modulated conꢀnuous-wave (FMCW) radar

DIP-switch-conﬁgurable sensing distance, sensiꢀvity, response ꢀme, and

output conﬁguraꢀon

Operaꢁng Frequency

US, TW Models: 24.075–24.175 GHz, ISM Band

Construcꢁon

EU, KR, SG Models: 24.050-24.250 GHz, ISM Band

Housing: ABS/polycarbonate

Lightpipes: Acrylic

Maximum Output Power

ERP: 3.3 mW, 5 dBm

Access Cap: Polyester

EIRP: 100 mW, 20 dBm

Operaꢁng Temperature

−40 °C to +65 °C (−40 °F to +149 °F)

Supply Voltage

12 to 30 V dc, less than 100 mA, exclusive of load

For KR models: 12 to 24 V dc, less than 100 mA exclusive of load

Environmental Raꢁng

IEC IP67

Supply Protecꢁon Circuitry

Connecꢁons

Protected against reverse polarity and transient overvoltages

Integral 5-wire 2 m (6.5 ꢁ) cable or M12 Euro-style QD ﬁꢂng. QD models

require a maꢀng cordset

Delay at Power-up

Less than 2 seconds

Cerꢁꢀcaꢁons

Output Conꢀguraꢁon

Bipolar NPN/PNP output, 150mA; DIP switch 6 selects N.O. (default) or N.C.

ETSI/EN 300 440

FCC part 15

operaꢀon

Output Protecꢁon

RSS-210

Protected against short circuit condiꢀons

ANATEL Category II

CMIIT Category G

ARIB STD T-73

KC mark - MSIP/RRA

NCC

IDA Singapore

Response Time

DIP switches 7 & 8 select ON/OFF response ꢀme

for others, contact Banner Engineering

Country of Origin: USA

FCC ID: UE3QT50RUS—This device complies with Part 15 of the FCC Rules. Operaꢀon is subject to the following two condiꢀons: (1) this

device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may

cause undesired operaꢀon.

IC: 7044A-QT50RCA—This device complies with Industry Canada license-exempt RSS standard(s). Operaꢀon is subject to the following

two condiꢀons: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that

may cause undesired operaꢀon of the device.

Cet appareil est conforme aux CNR exempts de licence d'Industrie Canada. Son foncꢀonnement est soumis aux deux condiꢀons

suivantes:(1) Ce disposiꢀf ne peut causer des interférences; et(2) Ce disposiꢀf doit accepter toute interférence, y compris les

interférences qui peuvent entraîner un mauvais foncꢀonnement de l'appareil.

Este equipamento opera em caráter secundário, isto é, não tem direito à proteção

contra interferência prejudicial, mesmo de estações do mesmo ꢀpo e não pode

causar interferência a sistemas operando em caráter primário.

SRD24-IO3B24100.2TR0.1 South Korea Class A Cerꢀﬁcaꢀon

(

)

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 162359 Rev. H

R-GAGE QT50R-AFH Sensor

Beam Paꢃern

Typical Beam Paꢃern (with BRTR-CC20E Radar Target, Radar Cross Secꢁon = 50

m )

Typical Beam Paꢃern (with 4 diﬀerent targets) at highest sensiꢁvity level

Leꢁ-Right Beam Paꢃern

20 m

Target 4

Sensitivity 4

Sensitivity 1

Target 1

10 m

0 m

10 m

20 m

10 m

20 m

10 m

20 m

30 m

40 m

10 m

20 m

30 m

40 m

Distance

1–4: Indicates sensiꢀvity level

1: Weak Object (Radar cross secꢀon = 0.25 m )

2: Car (Radar cross secꢀon = 3 m )

3: Large Truck (Radar cross secꢀon = 50 m )

4: Passenger Train (Radar cross secꢀon = 300 m )

Note: The eﬀecꢀve beam paꢃern depends on the sensiꢀvity level and target properꢀes.

Dimensions

74.1 mm

(2.92")

46.1 mm

(1.82")

37.0 mm

(1.46")

4X Ø4.4 mm

(Ø 0.17")

38.1 mm

(1.50")

33.0 mm

(1.30")

50.8 mm

(2.00")

66.0 mm

(2.60")

19.7 mm

(0.78")

R45.0 mm

(R1.77")

37.0 mm

(1.46")

34.2 mm

(1.35")

M30 X 1.5

ISO-6g

50.8 mm

(2.00")

Windows

The R-GAGE sensor can be placed behind a glass or a plasꢀc window, but the conﬁguraꢀon must be tested and the distance from the

sensor to the window must be determined and controlled prior to installaꢀon. There is typically a 20% signal reducꢀon when the sensor

is placed behind a window.

Polycarbonate at 4 mm thickness performs well in most situaꢀons, but the performance depends on ﬁller materials. Thinner (1 to 3 mm)

windows have high reﬂecꢀon. The amount of reﬂecꢀon depends on the material, thickness, and distance from the sensor to the

window.

P/N 162359 Rev. H

www.bannerengineering.com - Tel: +1-763-544-3164

R-GAGE QT50R-AFH Sensor

Locate the sensor in a posiꢀon of minimum reﬂecꢀon from the window, which will repeat every 6.1 mm of distance between the sensor

and the window. The posiꢀons of maximum reﬂecꢀon from the window repeat between the minimums, and decrease in eﬀect unꢀl the

window is approximately 150 mm (5.9 in) away. Consult the factory for pre-tested window materials which can be used at any distance

without issue.

Addiꢀonally, the face of the window should be protected from ﬂowing water and ice by use of a ﬂow diverter or hood directly above the

window. Falling rain or snow in the air in front of the window, light water mist, or small beads on the face of the window are typically

not an issue. However, a thick, conꢀnuous surface of water or ice directly on the face of the window can be detected as a dielectric

boundary.

Wiring

Wiring Key:

1 = Brown

12-30V dc

–

2 = White

Load 1

3 = Blue

Load 2

4 = Black

shield (QD cordset)

5 = Gray (Do not connect)

Note: Banner recommends that the shield wire (QD cordsets only) be connected to earth ground or dc common.

Shielded cordsets are recommended for all QD models.

Accessories

Quick Disconnect (QD) Cordsets

5-Pin Threaded M12/Euro-Style Cordsets—with Shield

Model

Length

Style

Dimensions

Pinout (Female)

MQDEC2-506

MQDEC2-515

MQDEC2-530

1.83 m (6 ꢁ)

4.57 m (15 ꢁ)

9.14 m (30 ꢁ)

44 Typ.

Straight

M12 x 1

ø 14.5

MQDEC2-550

15.2 m (50 ꢁ)

MQDEC2-506RA

MQDEC2-515RA

MQDEC2-530RA

1.83 m (6 ꢁ)

4.57 m (15 ꢁ)

9.14 m (30 ꢁ)

32 Typ.

[1.26"]

1 = Brown

2 = White

3 = Blue

4 = Black

5 = Gray

30 Typ.

[1.18"]

Right-Angle

MQDEC2-550RA

15.2 m (50 ꢁ)

M12 x 1

ø 14.5 [0.57"]

Note: Pin 5 is not used.

Mounꢁng Brackets

All measurements are in mm

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 162359 Rev. H

R-GAGE QT50R-AFH Sensor

SMB30SC

SMB30MM

•

Swivel bracket with 30 mm

•

12-ga. stainless steel bracket

mounꢀng hole for sensor

with curved mounꢀng slots for

versaꢀle orientaꢀon

•

Black reinforced thermoplasꢀc

polyester

Stainless steel mounꢀng and

swivel locking hardware

included

•

Clearance for M6 (¼ in)

hardware

Mounꢀng hole for 30 mm

sensor

Hole center spacing: A=ø 50.8

Hole size: A=ø 7.0, B=ø 30.0

Hole center spacing: A = 51, A to B = 25.4

Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1

Weather Deﬂector

QT50RCK

•

Required if the R-GAGE is exposed to rain or snow

Prevents buildup of water or ice from interfering with sensor

performance

Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or

replace, free of charge, any product of its manufacture which, at the ꢀme it is returned to the factory, is found to have been defecꢀve during the warranty period. This warranty does not cover

damage or liability for misuse, abuse, or the improper applicaꢀon or installaꢀon of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discreꢀon of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY

OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT

DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligaꢀons or liabiliꢀes relaꢀng to any product previously

manufactured by Banner Engineering Corp. Any misuse, abuse, or improper applicaꢀon or installaꢀon of this product or use of the product for personal protecꢀon applicaꢀons when the

product is idenꢀﬁed as not intended for such purposes will void the product warranty. Any modiﬁcaꢀons to this product without prior express approval by Banner Engineering Corp will void the

product warranꢀes. All speciﬁcaꢀons published in this document are subject to change; Banner reserves the right to modify product speciﬁcaꢀons or update documentaꢀon at any ꢀme.

Speciﬁcaꢀons and product informaꢀon in English supersede that which is provided in any other language. For the most recent version of any documentaꢀon, refer to:

www.bannerengineering.com.

QT50R-SG-AFH [BANNER]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E