R58ACG1 [BANNER]
R58A Series Registration Mark Sensors;型号: | R58ACG1 |
厂家: | Banner Engineering |
描述: | R58A Series Registration Mark Sensors |
文件: | 总5页 (文件大小:390K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
R58A Series Registraꢀon Mark Sensors
Datasheet
Registraꢀon Mark Sensors with Single Color LED and Potenꢀometer Adjustment of Switching Threshold
•
•
Fast 10 kHZ switching frequency; 15 µs repeatability
Rugged zinc alloy die-cast housing with high quality acrylic lens suitable for use
around food processing applicaꢀons: Sensor rated IEC IP67
Fixed-convergent sensing at 10 mm ± 3 mm (0.39 in ± 0.12 in)
Rectangular 1.2 mm × 3.8 mm (0.05 in × 0.15 in) sensing image at 10 mm (0.39 in)
from the face of the lens
•
•
•
•
•
•
Easy selecꢀon of Light/Dark Operate (LO/DO) by selecꢀon switch
Red or green LEDs available, depending on model
Parallel or perpendicular sensing image, depending on model
20 millisecond OFF-delay by model
WARNING: Not To Be Used for Personnel Protecꢀon
Never use this device as a sensing device for personnel protecꢀon. Doing so could lead to serious injury or death.
This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety
applicaꢀons. A sensor failure or malfuncꢀon can cause either an energized or de-energized sensor output
condiꢀon.
Models
Output & Supply
Models1
Focus Distance
Sensing Image Orientaꢀon
Emiꢁer Color
OFF-Delay
Voltage
R58ACG1
R58ACG1D
R58ACR1
R58ACR1D
R58ACG2
R58ACG2D
R58ACR2
R58ACR2D
0
20 ms
0
Parallel to sensor length
Green
Red
Green
Red
20 ms
0
Bipolar NPN/PNP
10 V dc to 30 V dc
10 mm (0.39 in)
Perpendicular to sensor length
20 ms
0
20 ms
1
Integral 2 m (6.5 ꢁ) unterminated cable models are listed.
•
•
•
To order the 9 m (30 ꢁ) PVC cable model, add the suffix "W/30" to the cabled model number. For example, R58ACG1 W/30.
To order the 150 mm (6 in) PVC cable model, add the suffix "Q" to the model number. For example, R58ACG1Q.
To order the 4-pin M12/Euro-style integral quick disconnect model, add the suffix "Q8" to the model number. For example, R58ACG1Q8.
Original Document
144736 Rev. B
12 April 2017
144736
R58A Series Registraꢀon Mark Sensors
Overview
R58A sensors offer high-performance, cost-effecꢀve registraꢀon mark sensing
featuring a single emiꢂer color and simplified sensor setup and adjustment.
The switching threshold is adjusted with a potenꢀometer, and two green LEDs assist
with seꢃng the opꢀmal threshold. Output status informaꢀon is provided by an
amber output LED. Light Operate or Dark Operate is also easily selectable via the
LO/DO selecꢀon switch.
The fast 10 kHz switching frequency and 15 microsecond repeatability ensure
reliability in high-speed operaꢀons. Models are available with a parallel or
perpendicular sensing image, as well as a 20 millisecond OFF-delay to solve a variety
of applicaꢀons. The rugged zinc alloy die-cast housing and high quality acrylic lens
are designed to handle ambient electrical noise and vibraꢀon from presses and die
cuꢃng machinery.
1. Amber Output Indicator
2. Green Setup Indicators
3. Switching Threshold Potenꢀometer
4. LO/DO Selecꢀon Switch
Figure 1. Features
Wiring Diagrams
1
+
Wiring Key:
1 = Brown
2 = White
3 = Blue
10-30V dc
3
–
2
Load
4 = Black
4
Load
Set Up the Sensor
1. Align the light spot to the mark.
2. Turn the potenꢀometer in the direcꢀon shown by the green LED unꢀl it switches.
3. Align the light spot to the background.
4. Turn the potenꢀometer, and count turns, in the direcꢀon shown by green LED unꢀl it switches.
2
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 144736 Rev. B
R58A Series Registraꢀon Mark Sensors
5. Turn potenꢀometer back half the number of turns from step 4.
6. Select Light Operate or Dark Operate.
Speciꢂcaꢀons
Supply Voltage and Current
Operaꢀng Condiꢀons
10 V dc to 30 V dc (10% max. ripple within specified voltage range); 36 mA
Temperature: −10 °C to +55 °C (+14 °F to +131 °F)
Storage Temperature −20 °C to +80 °C (−4 °F to +176 °F)
90% at +50 °C maximum relaꢀve humidity (non-condensing)
exclusive of load
Supply Protecꢀon Circuitry
Vibraꢀon and Shock
Protected against reverse polarity and transient voltages
All models meet IEC 68-2-6 and IEC 68-2-27 tesꢀng criteria
Output Conꢂguraꢀon
Applicaꢀon Notes
Bipolar; one current sourcing (PNP) and one current sinking (NPN)
Output Raꢀng
1. Do not mount the sensor directly perpendicular to shiny surfaces;
posiꢀon it at approximately 15 angle in relaꢀon to the sensing
target.
150 mA max. (each output)
Off-state leakage current:< 10 microamps
NPN saturaꢀon: < 200 mV at 10 mA and < 1.0 V at 150 mA
PNP saturaꢀon: < 1 V at 10 mA and < 2.0 V at 150 mA
2. Minimize web or product "ꢄuꢂer" whenever possible to maximize
sensing reliability. Posiꢀon sensor near a roller if possible.
3. The lens may be installed in either of the two lens ports. The lens
Output Protecꢀon Circuitry Output Protecꢀon Circuitry
port cap must be installed on the unused port for reliable operaꢀon.
Protected against output short-circuit, conꢀnuous overload, and false pulse on
power-up
Required Overcurrent Protecꢀon
Output Response Time
WARNING: Electrical connecꢀons must be made
by qualified personnel in accordance with local
and naꢀonal electrical codes and regulaꢀons.
50 microseconds: 100 millisecond delay on power-up (outputs do not conduct)
Repeatability
15 microseconds
Overcurrent protecꢀon is required to be provided by end product applicaꢀon
per the supplied table.
Sensing Image
Overcurrent protecꢀon may be provided with external fusing or via Current
Limiꢀng, Class 2 Power Supply.
Rectangular: 1.2 mm × 3.8 mm (0.05 in × 0.15 in) at 10 mm (0.39 in) from face
of lens; Image oriented either parallel or perpendicular to sensor length, by
model (see Models on page 1).
Supply wiring leads < 24 AWG shall not be spliced.
For addiꢀonal product support, go to www.bannerengineering.com.
Adjustments
Light/Dark Operate (LO/DO) select switch, and 15-turn switchpoint adjustment
potenꢀometer
Supply Wiring (AWG)
Required Overcurrent Protecꢀon (Amps)
20
22
24
26
28
30
5.0
3.0
2.0
1.0
0.8
0.5
Indicators
1 Amber: Output acꢀve
2 Green: Switchpoint threshold adjustment indicators
Construcꢀon
Housing: Zinc alloy die-cast housing with black painted finish and o-ring sealed
lens port cap
Lens: Acrylic
Lens port cap and lens holder: ABS
Sensiꢀvity and LO/DO adjusters: Acetal
QD: Anodized aluminum
Environmental Raꢀng
Cerꢀꢂcaꢀons
IEC IP67; NEMA 6
Connecꢀons
PVC-jacketed 4-conductor 2 m (6.5 ꢁ); 9 m (30 ꢁ) aꢂached cable; integral 4-pin
Euro-style QD fiꢃng; or 150 mm (6 in) with 4-pin Euro-style QD fiꢃng. Maꢀng
QD cordsets are purchased separately.
P/N 144736 Rev. B
www.bannerengineering.com - Tel: +1-763-544-3164
3
R58A Series Registraꢀon Mark Sensors
Dimensions
Max. torque 45 in-lbs
Default lens position
Accessories
Quick-Disconnect (QD) Cordsets
4-Pin Threaded M12/Euro-Style Cordsets
Model
Length
Style
Dimensions
Pinout (Female)
MQDC-406
MQDC-415
MQDC-430
1.83 m (6 ꢁ)
4.57 m (15 ꢁ)
9.14 m (30 ꢁ)
44 Typ.
Straight
M12 x 1
ø 14.5
2
3
MQDC-450
15.2 m (50 ꢁ)
1
4
MQDC-406RA
MQDC-415RA
MQDC-430RA
1.83 m (6 ꢁ)
4.57 m (15 ꢁ)
9.14 m (30 ꢁ)
32 Typ.
[1.26"]
1 = Brown
2 = White
3 = Blue
30 Typ.
[1.18"]
Right-Angle
4 = Black
MQDC-450RA
15.2 m (50 ꢁ)
M12 x 1
ø 14.5 [0.57"]
4
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 144736 Rev. B
R58A Series Registraꢀon Mark Sensors
Mounꢀng Brackets
SMB55A
SMB55F
•
•
15° offset bracket
12-gauge stainless steel
•
•
Flat-mount bracket
12-gauge stainless steel
SMB55RA
SMB55S
•
•
Right-angle bracket
12-gauge stainless steel
•
•
15° offset bracket
12-gauge stainless steel
Replacement Lens
UC-R55
•
Replacement lens for R58A,
R58B, and R58E
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or
replace, free of charge, any product of its manufacture which, at the ꢀme it is returned to the factory, is found to have been defecꢀve during the warranty period. This warranty does not cover
damage or liability for misuse, abuse, or the improper applicaꢀon or installaꢀon of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discreꢀon of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY
OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT
DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligaꢀons or liabiliꢀes relaꢀng to any product previously
manufactured by Banner Engineering Corp. Any misuse, abuse, or improper applicaꢀon or installaꢀon of this product or use of the product for personal protecꢀon applicaꢀons when the
product is idenꢀfied as not intended for such purposes will void the product warranty. Any modificaꢀons to this product without prior express approval by Banner Engineering Corp will void the
product warranꢀes. All specificaꢀons published in this document are subject to change; Banner reserves the right to modify product specificaꢀons or update documentaꢀon at any ꢀme.
Specificaꢀons and product informaꢀon in English supersede that which is provided in any other language. For the most recent version of any documentaꢀon, refer to:
www.bannerengineering.com.
©
Banner Engineering Corp. All rights reserved
相关型号:
©2020 ICPDF网 联系我们和版权申明