VS3RN5XLPQ [BANNER]

VS3 Series Retroreflective Mode Sensors;


型号：	VS3RN5XLPQ
厂家：	Banner Engineering
描述：	VS3 Series Retroreflective Mode Sensors
文件：	总5页 (文件大小：884K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

VS3 Series Retroreflective Mode Sensors

Miniature self-contained sensors

VS3 Series Retroreflective Mode Sensor Features

• Extremely compact self-contained miniature sensor

• Coaxial optics eliminate “blind” area at close range

• Visible red sensing beam (both polarized and non-polarized versions)

• Range to supplied retroreflector is 0 to 250 mm (up to 10")

• 10 to 30V dc operation

• Choice of integral cable or quick-disconnect connector

• 3-wire hookup; output load capacity to 50 mA

• Choose models with NPN (sinking) or PNP (sourcing) output

• Choose dark- or light-operate models

User Application Notes:

• The VS3...XLP series should be used for general sensing applications like packages, small parts, mirror-like surfaces,

or documents. They are most effective when used with the supplied micro-prism reflector.

• When using glass bead tape, (e.g., 3M model 6870), non-polarized models (...XLV) must be used. These models should

also be considered when a glass lens (as in the LP models) is not permitted in the sensing environment.

• For non-polarized sensors, an object’s surface reflection (e.g., polished stainless steel), may be more reflective than

low-grade retro-reflective tape, and “bright” object transition may never be detected by the non-polarized sensor.

Visible Red, 680 nm

VS3 Series Retroreflective-Mode Sensors

Supply

Voltage

Output

Type

Models

Cable

Excess Gain

Beam Pattern

Non-Polarized Models

1000

VS3AN5XLV

VS3AN5XLVQ

2 m (6.5')

3-Pin Pico QD

NPN

Light Operate

VS3XLV

15 mm

0.60 in

Retroreflective Mode

10 mm

5 mm

0.40 in

0.20 in

100

Retroreflective

Mode

250 mm (10")

VS3RN5XLV

VS3RN5XLVQ

2 m (6.5')

3-Pin Pico QD

NPN

Dark Operate

using

5 mm

10 mm

15 mm

0.20 in

0.40 in

0.60 in

with BRT32X20AM

Reflector

10 to

30V dc

BRT32X20AM

retro target

(supplied)

with BRT32X20AM

Reflector

VS3AP5XLV

VS3AP5XLVQ

2 m (6.5')

3-Pin Pico QD

PNP

Light Operate

50 mm 100 mm 150 mm 200 mm 250 mm

2.0 in 4.0 in 6.0 in 8.0 in 10.0 in

1 mm

0.04 in

10 mm

0.4 in

100 mm

4 in

1000 mm

40 in

DISTANCE

VS3RP5XLV

2 m (6.5')

PNP

DISTANCE

VS3RP5XLVQ

3-Pin Pico QD

Dark Operate

Polarized Models

1000

VS3AN5XLP

VS3AN5XLPQ

2 m (6.5')

3-Pin Pico QD

NPN

Light Operate

VS3XLP

15 mm

0.60 in

Polarized

Retroreflective

Mode

10 mm

5 mm

0.40 in

0.20 in

100

Retroreflective

Mode

250 mm (10")

VS3RN5XLP

VS3RN5XLPQ

2 m (6.5')

3-Pin Pico QD

NPN

Dark Operate

using

5 mm

10 mm

15 mm

0.20 in

0.40 in

0.60 in

with BRT32X20AM

Reflector

10 to

30V dc

BRT32X20AM

retro target

(supplied)

with BRT32X20AM

Reflector

VS3AP5XLP

VS3AP5XLPQ

2 m (6.5')

3-Pin Pico QD

PNP

Light Operate

50 mm 100 mm 150 mm 200 mm 250 mm

2.0 in

4.0 in

6.0 in

8.0 in 10.0 in

1 mm

0.04 in

10 mm

0.4 in

100 mm

4 in

1000 mm

40 in

DISTANCE

VS3RP5XLP

2 m (6.5')

PNP

DISTANCE

VS3RP5XLPQ

3-Pin Pico QD

Dark Operate

See Safety Use Warning on Back Page.

Jan 2013

p/n 63226 Rev. B

Printed in USA

07/02

P/N 63226 rev. A

VS3 Series Retroreflective Mode

VS3 Series Overview

20 mm

(0.8")

3.0 mm

(.12")

VS3 Series miniature self-contained sensors are designed for retroreflective sensing

in small areas previously accessible only to remote or fiber optic models. Typical

applications include mounting on small feeder tracks, packaging machines, and

conveyors, where larger sensors will not fit.

26 mm

(1.0")

20 mm

(0.8")

32 mm

(1.1")

The coaxial optics of the VS3 allow the retroreflective target to be placed as close to

the sensor lens as needed – there is no “blind” response area, as is typical of most

retroreflective sensors. The VS3 is supplied with a Banner model BRT32X20AM

retroreflective target (see right). The specifications shown on page 1 assume use of

this target.

ø3.5 mm

(0.14")

2.0 mm

(0.08")

Maximum Temperature: 65°C (150°F)

Figure 1. Retroreflective target, model

BRT-32X20AM (supplied with

each sensor)

Other retroreflective materials may be substituted. For example, using the standard

BRT-3 target, the range becomes 400 mm (16"); standard BRT-THG retroreflective

tape yields a 150 mm (6") range. Contact Banner Engineering for sensing

performance when using other retroreflective targets.

VS3 Series Specifications

Supply Voltage and Current

Supply Protection Circuitry

Output Configuration

10 to 30V dc (10% maximum ripple) at less than 25 mA (exclusive of load)

Protected against reverse polarity and transient voltages

SPST solid-state switch

Choose NPN (current sinking) or PNP (current sourcing) models

Choose light operate (N.O.) or dark operate (N.C.) models

Output Rating

50 mA maximum

OFF-state leakage current: < 1 microamp at 24V dc

ON-state saturation voltage: < 0.25V at 10 mA dc; < 0.5V at 50 mA dc

Output Protection Circuitry

Output Response Time

Protected against false pulse on power-up and continuous overload or short circuit of outputs

Overload trip point ≥ 100 mA

1 millisecond ON and OFF

(NOTE: 150 millisecond delay maximum on power-up: output does not conduct during this time)

Repeatability

Indicators

160 microseconds

Two LEDs: Green and Yellow

Green ON steady: power to sensor is ON

Green flashing: output overload

Yellow ON steady: light is sensed

Construction

XLV Models: Black ABS housing with acrylic lens

XLP Models: Black ABS housing with glass lens and acrylic cover

Environmental Rating

Connections

IEC IP67; NEMA 6

2 m (6.5') attached cable: three #28 ga stranded conductors with PE insulation; PVC outer cable jacket; or

3-pin Pico-style threaded quick-disconnect fitting. QD cables are ordered separately.

Operating Conditions

Temperature: -20° to +55°C (-4° to +131°F)

Maximum Relative Humidity: 80% at 50°C (non-condensing)

Vibration and

Mechanical Shock

Vibration: All models meet IEC 60068-2-6, IEC 60947-5-2, UL491 Section 40, MIL-STD-202F Method 201A;

10 to 60 Hz, 0.5 mm peak to peak

Shock: All models meet IEC 60068-2-27, IEC 60947-5-2; 30g peak acceleration, 11 millisecond pulse

duration, half-sine wave pulse shape

Application Notes

Certifications

M3 stainless steel mounting hardware included. Optional mounting brackets are available (page 4).

Banner Engineering Corp. • Minneapolis, U.S.A.

www.bannerengineering.com • Tel: 763.544.3164

page 2

VS3 Series Retroreflective Mode

VS3 Series Sensor Hookups

Sensors with NPN Outputs

Cabled Models

Sensors with PNP Outputs

Cabled Models

–

10-30V dc

–

Load

Quick-Disconnect Models

–

10-30V dc

–

10-30V dc

Load

VS3 Series Retroreflective Mode Sensor Dimensions

VS3...5XLV

VS3...5XLVQ

With

Integral

Cable

9 mm

(0.35")

15.6 mm

(0.61")

ø3.2 mm

(0.13")

4.5 mm

(0.18")

12.6 mm

(0.50")

14.2 mm

(0.56")

25.4 mm

(1.00")

35.2 mm

(1.39")

16.4 mm

(0.65")

30 mm

(1.2")

7.3 mm

(0.29")

VS3...5XLP

9 mm

(0.35")

VS3...5XLPQ

With

Straight

QD Cable

With

Right-angle

QD Cable

16.6 mm

(0.65")

ø3.2 mm

(0.13")

4.5 mm

(0.18")

13.6 mm

(0.54")

14.2 mm

(0.56")

25.4 mm

(1.00")

35.2 mm

(1.39")

16.4 mm

(0.65")

7.3 mm

(0.29")

47 mm

(1.9")

75 mm

(3.0")

Banner Engineering Corp. • Minneapolis, U.S.A.

www.bannerengineering.com • Tel: 763.544.3164

page 3

VS3 Series Retroreflective Mode

Accessories

Quick-Disconnect (QD) Cables

Style

Models

Length

For Use With

Dimensions

Pinout

34.7 mm

(1.37")

M8 x 1

PKG3M-2

PKG3M-9

2 m (6.5')

9 m (30')

Black Wire

Blue Wire

3-pin Pico Style

Straight

9.6 mm

(0.38")

Brown Wire

All VS3 Series sensors

with model suffix “Q”.

23.5 mm

(0.93")

Black Wire

Blue Wire

PKW3M-2

PKW3M-9

2 m (6.5')

9 m (30')

16.5 mm

(0.65")

3-pin Pico Style

Right-angle

ø9.6 mm

(0.38")

M8 x 1

VS3 Series Mounting Brackets

• Right-angle bracket

• 300 series stainless steel

• Right-angle tall bracket

• 300 series stainless steel

SMBVS3S

SMBVS3T

2x 3.2 mm

(0.13")

Ø13.5 mm

(0.53")

7.0 mm

(0.28")

11.8 mm

(0.46")

40°

6.0 mm

(0.24")

Ø13.5mm

(0.53")

13.5 mm

(0.53")

40°

13.5 mm

(0.53")

4x 3.30 mm

(0.13")

5.0 mm

(0.20")

3x 3.3 mm

(0.13")

16.0 mm

(0.63")

51.6 mm

(2.03")

13.5 mm

(0.53")

.9 mm

(0.04")

5.0 mm

(0.20")

20.5 mm

(0.81")

0.9 mm

(0.04")

16.0 mm

(0.63")

23.5 mm

(0.93")

18.0 mm

(0.71")

WARNING . . . ^{Not To Be Used for Personnel Protection}

Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.

These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety

applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current

Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.

WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or

replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty

period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any

other warranty either expressed or implied.

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: sensors@bannerengineering.com

Banner Engineering Corp Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year

following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its

manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty

period.This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of

the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR

IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEAL-

ING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO

EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR

ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR

SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE

THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY,

NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming

any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp.

P/N 63226 Rev. B

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: sensors@bannerengineering.com

相关型号：