VSM4AP6CV20 [BANNER]

VSM Series Micro Sensors;


型号：	VSM4AP6CV20
厂家：	Banner Engineering
描述：	VSM Series Micro Sensors
文件：	总7页 (文件大小：656K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

VSM Series Micro Sensors

Datasheet

Miniature self-contained sensors in stainless steel housing

•

Tough - 300 series stainless steel body withstands a wide variety of

chemicals and cutting fluids

Tiny sensors are available as small as a 4 mm barrel (about the size

of a single optical fiber assembly)

Economical, self-contained sensors are available in diffuse or

opposed sensing modes; no separate amplifier required

Advanced optical design provides high performance, and very

repeatable sensing

Well-focused, narrow beam allows the entire barrel sensor to be

recessed into fixtures (excluding 50 mm range models)

Smooth, stainless steel barrel is perfect for hygienic applications that

require routine cleaning

A choice of threaded or smooth barrel housings or flat-pack side-

looking housing

WARNING: Not To Be Used for Personnel Protection

Never use this device as a sensing device for personnel protection. Doing so could lead to

serious injury or death. This device does not include the self-checking redundant circuitry necessary

to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an

energized or de-energized sensor output condition.

Models

Housing Style: 4 mm Smooth Barrel

NPN Models

PNP Models

Sensing Mode

Range

Output

Type

Connection

VSM46E Emitter

2 m (6.6 ft)

3-Pin Pico QD

2 m (6.6 ft)

3-Pin Pico QD

2 m (6.6 ft)

3-Pin Pico QD

2 m (6.6 ft)

3-Pin Pico QD

2 m (6.6 ft)

3-Pin Pico QD

—

VSM46EQ7 Emitter

VSM4RP6R

250 mm (9.84 in)

VSM4RN6R

OPPOSED

VSM4RN6RQ7

VSM4RP6RQ7

VSM4AN6CV10

VSM4AN6CV10Q7

VSM4AN6CV20

VSM4AN6CV20Q7

VSM4AN6CV50

VSM4AN6CV50Q7

VSM4AP6CV10

VSM4AP6CV10Q7

VSM4AP6CV20

VSM4AP6CV20Q7

VSM4AP6CV50

VSM4AP6CV50Q7

10 to 30 mm (0.39 to 1.18 in)

typical

20 to 50 mm (0.79 to 1.97 in)

typical

DIFFUSE

50 to 140 mm (1.97 to 5.51 in)

typical

Application Note: These sensors have a specified minimum detection range on a 90% reflectivity diffuse white card, but the maximum detection

range varies with target reflectivity, target angle, and sensor tolerance. If reliable background suppression is required in your application, please

contact Banner Engineering to specify a fixed-field or adjustable field sensor with background suppression technology.

Original Document

157367 Rev. F

7 June 2016

157367

VSM Series Micro Sensors

Housing Style: 5 mm Threaded Barrel

NPN Models

PNP Models

Sensing Mode

Range

Output

Type

Connection

VSM56E Emitter

2 m (6.6 ft)

3-Pin Pico QD

2 m (6.6 ft)

3-Pin Pico QD

2 m (6.6 ft)

3-Pin Pico QD

2 m (6.6 ft)

3-Pin Pico QD

2 m (6.6 ft)

3-Pin Pico QD

—

VSM56EQ7 Emitter

VSM5RP6R

250 mm (9.84 in)

VSM5RN6R

OPPOSED

VSM5RN6RQ7

VSM5RP6RQ7

VSM5AN6CV10

VSM5AN6CV10Q7

VSM5AN6CV20

VSM5AN6CV20Q7

VSM5AN6CV50

VSM5AN6CV50Q7

VSM5AP6CV10

VSM5AP6CV10Q7

VSM5AP6CV20

VSM5AP6CV20Q7

VSM5AP6CV50

VSM5AP6CV50Q7

10 to 30 mm (0.39 to 1.18 in)

typical

20 to 50 mm (0.79 to 1.97 in)

typical

DIFFUSE

50 to 140 mm (1.97 to 5.51 in)

typical

Housing Style: Flat-Pack Side-Looker

NPN Models

PNP Models

Sensing Mode

Range

Output Type

Connection

20 to 50 mm (0.79 to 1.97 in)

typical

VSMQAN6CV20

VSMQAP6CV20

50 to 140 mm (1.97 to 5.51 in)

typical

VSMQAN6CV50

VSMQAN6CV90

VSMQAP6CV50

VSMQAP6CV90

2 m (6.6 ft)

DIFFUSE

90 to 200 mm (3.54 to 7.87 in)

typical

Application Note: These sensors have a specified minimum detection range on a 90% reflectivity diffuse white card, but the maximum detection

range varies with target reflectivity, target angle, and sensor tolerance. If reliable background suppression is required in your application, please

contact Banner Engineering to specify a fixed-field or adjustable field sensor with background suppression technology.

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 157367 Rev. F

VSM Series Micro Sensors

Specifications

Supply Voltage and Current

Output Protection Circuitry

10 to 30 V dc (10% maximum ripple)

Protected against false power-up and continuous overload or short circuit of

outputs

Overload trip point ≥ 100 mA

Supply Protection Circuitry

Protected against reverse polarity and transient voltages

Response Time

Output Configuration

2.5 milliseconds

Single-output: 1 NPN or 1 PNP; light operate (LO) or dark operate

(DO), depending on model

Delay at Power-Up

20 milliseconds

Output Rating

100 mA max

Repeatability

OFF-state leakage current: less than 1 µA

ON-state saturation voltage: less than 2 V at 100 mA

1 millisecond

Indicators

Required Overcurrent Protection

Yellow LED: light sensed

Construction

WARNING: Electrical connections must be

made by qualified personnel in accordance

with local and national electrical codes and

regulations.

300 series stainless steel with PVC cable

CV10, CV20: sapphire lens

CV50, emitter and receiver: glass lens

Environmental Rating

Overcurrent protection is required to be provided by end product

application per the supplied table.

IP67

Overcurrent protection may be provided with external fusing or via

Current Limiting, Class 2 Power Supply.

Supply wiring leads < 24 AWG shall not be spliced.

For additional product support, go to http://

www.bannerengineering.com.

Connection

2 m PVC-jacketed cable or 3-pin Pico-style integral QD (Q7), depending on

model.

Operating Conditions

Temperature: 0 °C to +55 °C (+32 °F to +131 °F)

Certifications

Supply Wiring (AWG)

Required Overcurrent Protection (Amps)

5.0

3.0

2.0

1.0

0.8

0.5

Dimensions

4 mm Smooth Barrel Emitter/Receiver Cable and 50 4 mm Smooth Barrel Emitter/Receiver QD and 50 mm

mm CV Models CV Models

P/N 157367 Rev. F

www.bannerengineering.com - Tel: +1-763-544-3164

VSM Series Micro Sensors

5 mm Threaded Barrel Emitter/Receiver Cable and 50

mm CV Models

VSM5 Emitter/Receiver QD and 50 mm CV Models

4 mm Smooth Barrel Cable/10 and 20 mm CV Models

4 mm Smooth Barrel QD/10 and 20 mm CV Models

5 mm Threaded Barrel Cable/10 and 20 mm CV

Models

5 mm Threaded Barrel QD/10 and 20 mm CV Models

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 157367 Rev. F

VSM Series Micro Sensors

Flat-Pack Side-Looker

Excess Gain Curves

Opposed Mode VSM4 and

VSM5

Diffuse Mode VSM4 and VSM5

Range 250 mm

Range 10 mm

Range 20 mm

Range 50 mm

1000

100

10 mm 20 mm 30 mm 40 mm 50 mm 60 mm

4 mm

8 mm

12 mm 16 mm

20 mm

2 mm

4 mm 6 mm

8 mm

10 mm

50 mm 100 mm 150 mm 200 mm 250 mm 300 mm

Diffuse Mode VSMQ

Range 50 mm

Range 20 mm

Range 90 mm

100

10 mm 20 mm 30 mm 40 mm 50 mm 60 mm

18 mm 36 mm 54 mm 72 mm 96 mm

4 mm

8 mm 12 mm 16 mm 20 mm

P/N 157367 Rev. F

www.bannerengineering.com - Tel: +1-763-544-3164

VSM Series Micro Sensors

Beam Patterns

Opposed Mode VSM4 and

VSM5

Diffuse Mode VSM4 and VSM5

Range 20 mm

Range 250 mm

Range 10 mm

Range 50 mm

5 mm

4 mm

3 mm

2 mm

1 mm

0 mm

1 mm

2 mm

3 mm

4 mm

5 mm

50 mm

40 mm

30 mm

20 mm

10 mm

0 mm

50 mm

40 mm

30 mm

20 mm

10 mm

0 mm

100 mm

80 mm

60 mm

40 mm

20 mm

0 mm

10 mm

20 mm

30 mm

40 mm

10 mm

20 mm

30 mm

40 mm

50 mm

20 mm

40 mm

60 mm

80 mm

100 mm

50 mm

4 mm 8 mm 12 mm 16 mm 20 mm

10 mm 20 mm 30 mm 40 mm 50 mm

DISTANCE

2 mm 4 mm 6 mm 8 mm 10 mm

DISTANCE

100

150

200

250

DISTANCE

DISTANCE (mm)

Diffuse Mode VSMQ

Range 20 mm

Range 50 mm

Range 90 mm

5 mm

4 mm

3 mm

2 mm

1 mm

0 mm

1 mm

2 mm

3 mm

4 mm

5 mm

50 mm

40 mm

30 mm

20 mm

10 mm

0 mm

50 mm

40 mm

30 mm

20 mm

10 mm

0 mm

10 mm

20 mm

30 mm

40 mm

50 mm

10 mm

20 mm

30 mm

40 mm

50 mm

10 mm 20 mm 30 mm 40 mm 50 mm

DISTANCE

4 mm 8 mm 12 mm 16 mm 20 mm

DISTANCE

20 mm 40 mm 60 mm 80 mm 100 mm

DISTANCE

Wiring

Emitters

PNP Models

NPN Models

–

10-30V dc

–

Load

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 157367 Rev. F

VSM Series Micro Sensors

Accessories

Cordsets

3-Pin Threaded M8/Pico-Style Cordsets

Model

Length

Style

Dimensions

Pinout

PKG3M-2

PKG3M-5

PKG3M-7

PKG3M-9

PKG3M-10

2 m (6.56 ft)

5 m (16.40 ft)

7 m (22.97 ft)

9 m (29.53 ft)

10 m (32.81 ft)

Straight

35 Typ.

ø 9.5

1 = Brown

3 = Blue

4 = Black

M8 x 1

PKW3M-2

PKW3M-5

PKW3M-9

2 m (6.56 ft)

5 m (16.40 ft)

9 m (29.53 ft)

Right-Angle

28 Typ.

20 Typ.

M8 x 1

ø 9.5

Brackets

SMBVSM4

Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.

will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty

period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,

ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE

OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE

LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL,

CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER

ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product

previously manufactured by Banner Engineering Corp.

Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not

intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product

warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any

time. For the most recent version of any documentation, refer to: www.bannerengineering.com.

www.bannerengineering.com - Tel: +1-763-544-3164

VSM4AP6CV20 [BANNER]

相关型号：

VSM4AP6CV20Q7

VSM4AP6CV50

VSM4AP6CV50Q7

VSM4RN6R

VSM4RN6RQ7

VSM4RP6R

VSM4RP6RQ7

VSM5112

VSM51121

VSM51121-FREQ

VSM51121-FREQ-OUT23

VSM51121/1.00MHZ