WLAW105X180LXXPWMQ

更新时间:2024-10-29 23:23:38
品牌:BANNER
描述:WLA General Purpose LED Light - PWM Dimmable

WLAW105X180LXXPWMQ 概述

WLA General Purpose LED Light - PWM Dimmable

WLAW105X180LXXPWMQ 数据手册

通过下载WLAW105X180LXXPWMQ数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
WLA General Purpose LED Light - PWM  
Dimmable  
Datasheet  
Intensity can be controlled from 0 to 100% using Pulse Width Modulation (PWM) on an  
input control wire  
High power solid state LED array in white and color models  
Illuminates a large area with an even pattern of light and no shadows  
Designed for area and machine lighting  
Rugged thermoplastic housing rated to IP69K  
Lensed models provide a concentrated, more intense, beam pattern  
Available in four sizes  
Cabled and quick-disconnect models available  
Lensed models shown at left; non-lensed  
models shown at right  
For PWM dimming, use with the LC65 Dimmer Module. For more information, refer to the LC65 LED Dimmer Module  
datasheet, p/n 177086.  
Important: Read the following instructions before operating the light. Please download the complete WLA Series Work Light  
technical documentation, available in multiple languages, from www.bannerengineering.com for details on the proper use,  
applications, Warnings, and installation instructions of this device.  
Important: Lea el siguiente instructivo antes de operar el luminario. Por favor descargue desde www.bannerengineering.com  
toda la documentación técnica de los WLA Series Work Light, disponibles en múltiples idiomas, para detalles del uso  
adecuado, aplicaciones, advertencias, y las instrucciones de instalación de estos dispositivos.  
Models  
Lensed Models (xx)  
11 = 11ꢀ lenses  
1
Non-Lensed Models  
Housing Length L1  
Connection  
LED Color  
Cool white  
Input Voltage  
12 to 30 V dc  
22 = 22ꢀ lenses  
30 = 30ꢀ lenses  
WLAW105X180PWMQ  
WLAW190X180PWMQ  
WLAW275X180PWMQ  
WLAW360X180PWMQ  
WLAW105X180LxxPWMQ  
WLAW190X180LxxPWMQ  
WLAW275X180LxxPWMQ  
WLAW360X180LxxPWMQ  
105 mm  
190 mm  
275 mm  
360 mm  
4-pin Euro integral QD  
connector  
Additional color and window options listed in the model key.  
LED  
Color  
Array Size  
(mm)  
Family  
WLA  
Window  
D
Lensing  
Connector  
W
105X180  
L11  
PWM  
Q
105X180  
190X180  
275X180  
360X180  
Blank = No lenses  
Blank = 2 m integral cable  
Q = Integral 4-pin Euro-style QD  
(mating cordset required)  
L11 = ± 11 degree lenses  
L22 = ± 22 degree lenses  
L30 = ± 30 degree lenses  
W = Cool white  
WW = Warm white  
R = Red  
Blank = Clear plastic  
D = Diffused plastic  
PWM = Pulse width  
modulation  
G = Green  
B = Blue  
Y = Yellow  
1
Integral QD models only are listed. To order the integral 2 m (6.5 ft) PVC cable models, omit the suffix Q from model number (example, WLAW105X180PWM). A model with a  
QD requires a mating cordset.  
Original Document  
179494 Rev. B  
12 September 2019  
179494  
WLA General Purpose LED Light - PWM Dimmable  
Wiring  
Pins  
Color  
brown  
blue  
Connection  
12 to 30 V dc  
dc common  
1
3
4
2
2
1
4
black  
white  
Pulse width modulation (PWM) input  
Not used  
3
For maximum intensity, leave the white and black wires floating or connected to common.  
Specifications  
Supply Voltage and Current  
12 V dc to 30 V dc (10% maximum ripple)  
Maximum Current per Length  
Use only with suitable Class 2 power supply (UL) or SELV  
power supply (CE).  
Light Length  
12 V dc  
24 V dc  
30 V dc  
Watts  
See electrical characteristics on product label  
Maximum current per length:  
105 mm  
190 mm  
275 mm  
360 mm  
0.8 A  
1.6 A  
2.4 A  
3.2 A  
0.4 A  
0.8 A  
1.2 A  
1.6 A  
0.32 A  
0.64 A  
0.96 A  
1.28 A  
9.6  
19.2  
28.8  
38.4  
Pulse Width Modulation (PWM)  
Frequency: Up to 300 Hz  
Voltage: 8 to 30 V dc  
Current: 4 mA max.  
Lumens and Lux  
Light Length  
2
Lumens  
Cool White  
Warm White  
Green  
Red  
Yellow  
Blue  
105 mm  
190 mm  
275 mm  
360 mm  
550  
435  
870  
325  
650  
125  
250  
375  
500  
275  
550  
95  
1100  
1650  
2200  
190  
285  
380  
1305  
1740  
975  
825  
1300  
1100  
2
2
Light Length  
Non Lensed Models Max Lux at 1m  
L11 Lensed Models Max Lux at 1m  
Cool White  
Warm White  
Green  
Red  
Yellow  
Blue  
Cool White  
Warm White  
Green  
Red  
Yellow  
Blue  
105 mm  
190 mm  
275 mm  
360 mm  
215  
430  
645  
860  
170  
340  
510  
680  
115  
230  
345  
460  
55  
110  
220  
330  
440  
30  
60  
2865  
5140  
7565  
8875  
2290  
4110  
6050  
7100  
2910  
4990  
6400  
7405  
1375  
2605  
3345  
3730  
1795  
3360  
4705  
5605  
815  
110  
165  
220  
1385  
1760  
2030  
90  
120  
2
2
L30 Lensed Models Max Lux at 1m  
Light Length  
L22 Lensed Models Max Lux at 1m  
Cool White  
Warm White  
Green  
Red  
Yellow  
Blue  
Cool White  
Warm White  
Green  
Red  
Yellow  
Blue  
105 mm  
190 mm  
275 mm  
360 mm  
1110  
2155  
3160  
4160  
880  
1125  
2090  
2675  
3470  
530  
695  
315  
580  
735  
950  
760  
600  
770  
365  
760  
475  
980  
215  
405  
515  
660  
1705  
2500  
3290  
1090  
1400  
1750  
1410  
1965  
2625  
1500  
2210  
2890  
1185  
1745  
2285  
1450  
1870  
2410  
975  
1375  
1825  
1215  
2
Lumen and lux values are typical when operating at 25 ꢀC ambient. Values lowered by 35% on diffused windows models.  
2
www.bannerengineering.com - Tel: + 1 888 373 6767  
P/N 179494 Rev. B  
WLA General Purpose LED Light - PWM Dimmable  
Light Characteristics  
Cool White: 5300–7000K  
Environmental Rating  
Rated IEC IP67 and IP69K, per DIN 40050  
Construction  
Connections  
PBT housing; acrylic window; nickel-plated brass connector or PVC-jacketed  
cable  
Integral 4-pin M12 male quick disconnect (QD) (4-pin connecting cordset required); or 2 m  
(6.5 ft) integral cable  
Mounting  
Operating Temperature  
–20 ꢀC to +50 ꢀC (–4 ꢀF to +122 ꢀF)  
When mounting light to combustible or insulating surfaces, a minimum of 1  
inch of clearance around all sides is required. Use supplied standoffs or  
alternative mounting method to achieve spacing. Accessory bracket available.  
Storage Temperature  
–40 ꢀC to +70 ꢀC (–40 ꢀF to +158 ꢀF)  
Vibration and Mechanical Shock  
Note: Do not spray cable with high-pressure  
sprayer, or cable damage will result.  
All models meet Mil. Std. 202F requirements method 201A (vibration: 10 to 60 Hz max.,  
double amplitude 0.06", maximum acceleration 10G). Also meets IEC 947-5-2; 30G 11 ms  
duration, half sine wave.  
Certifications  
Dimensions  
L2  
L1  
Model  
L1  
L2  
WLAW105X..  
WLAW190X..  
WLAW275X..  
WLAW360X..  
105.1 mm (4.14 in)  
188.9 mm (7.44 in)  
272.7 mm (10.74 in)  
356.6 mm (14.04 in)  
92.8 mm (3.66 in)  
176.7 mm (6.96 in)  
260.3 mm (10.25 in)  
344.3 mm (13.55 in)  
Beam Pattern  
100%  
75%  
50%  
25%  
0%  
Non-Lensed  
L11  
L22 L30  
-100  
-80  
-60  
-40  
-20  
0
20  
40  
60  
80  
100  
Light Pattern from Center (cm)  
Figure 1. Percentage of Maximum Light Intensity for Lensed and Nonlensed Models at 1 Meter (Typical)  
P/N 179494 Rev. B  
www.bannerengineering.com - Tel: + 1 888 373 6767  
3
WLA General Purpose LED Light - PWM Dimmable  
Accessories  
Cordsets  
4-Pin Threaded M12/Euro-Style Cordsets—Single Ended  
Model  
Length  
Style  
Dimensions  
Pinout (Female)  
MQDC-406  
MQDC-415  
MQDC-430  
1.83 m (6 ft)  
4.57 m (15 ft)  
9.14 m (30 ft)  
44 Typ.  
Straight  
M12 x 1  
MQDC-450  
15.2 m (50 ft)  
2
3
ø 14.5  
1
4
MQDC-406RA  
MQDC-415RA  
MQDC-430RA  
1.83 m (6 ft)  
4.57 m (15 ft)  
9.14 m (30 ft)  
32 Typ.  
[1.26"]  
1 = Brown  
2 = White  
3 = Blue  
30 Typ.  
[1.18"]  
Right-Angle  
4 = Black  
MQDC-450RA  
15.2 m (50 ft)  
M12 x 1  
ø 14.5 [0.57"]  
Brackets  
SMBBSSM  
SMBBSRA  
2X Ø6.8  
316 stainless steel bracket and  
316 stainless steel bracket and  
hardware  
35  
2X Ø5.5  
hardware  
Includes 2 brackets; four M5  
socket drive, button head screws  
to attach to light  
Right-angle swivel bracket for  
versatile orientation  
180  
10.75  
SMBWLAMAG  
Kit includes two magnets, two  
M5 phillips head screws, and  
two M5 nuts with lock rings  
ø = 51.8 mm (2.04 in)  
Banner Engineering Corp. Limited Warranty  
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge,  
any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the  
improper application or installation of the Banner product.  
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR  
FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.  
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER  
PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR  
FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.  
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner  
Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such  
purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this  
document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is  
provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com.  
For patent information, see www.bannerengineering.com/patents.  
Mexican Importer  
Banner Engineering de Mèxico, S. de R.L. de C.V.  
David Alfaro Siqueiros 103 Piso 2 Valle oriente  
San Pedro Garza Garcia Nuevo Leòn, C. P. 66269  
81 8363.2714  
©
Banner Engineering Corp. All rights reserved  

WLAW105X180LXXPWMQ 相关器件

型号 制造商 描述 价格 文档
WLAW105X180LXXQ BANNER WLA Series Work Light 获取价格
WLAW105X180PWMQ BANNER WLA General Purpose LED Light - PWM Dimmable 获取价格
WLAW105X180Q BANNER WLA Series Work Light 获取价格
WLAW190X.. BANNER WLA Series Work Light 获取价格
WLAW190X180EQ BANNER WLA Series Encapsulated Work Light 获取价格
WLAW190X180LXXPWMQ BANNER WLA General Purpose LED Light - PWM Dimmable 获取价格
WLAW190X180LXXQ BANNER WLA Series Work Light 获取价格
WLAW190X180PWMQ BANNER WLA General Purpose LED Light - PWM Dimmable 获取价格
WLAW190X180Q BANNER WLA Series Work Light 获取价格
WLAW275X.. BANNER WLA Series Work Light 获取价格

WLAW105X180LXXPWMQ 相关文章

  • HARTING(浩亭)圆形连接器产品选型手册
    2024-10-31
    6
  • HYCON(宏康科技)产品选型手册
    2024-10-31
    6
  • GREEGOO整流二极管和晶闸管产品选型手册
    2024-10-31
    7
  • 西门子豪掷106亿美元,战略收购工程软件巨头Altair
    2024-10-31
    8