C9900-P950 [BECKHOFF]

UPS component, battery-backed;


型号：	C9900-P950
厂家：	Beckhoff
描述：	UPS component, battery-backed
文件：	总3页 (文件大小：109K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

CU8130-0120

https://www.beckhoﬀ.com/cu8130-0120

CU8130-0120 | UPS component, battery-backed

Product status: Regular delivery

CU8130-0120 is a battery-backed, uninterruptible power supply (UPS) providing up to 15 Wh with a maximum output power

of 110 W.

If the external 24 V DC input voltage is lost, the UPS takes over the supply of the devices connected to it thanks to its

regulated and buﬀered 24 V DC output voltage.

The CU81xx UPS series is suitable for all Beckhoﬀ components, particularly Industrial PCs, Embedded PCs, Panels, and Panel

PCs.

The main features of this UPS are:

battery module based on NiMH cells

battery module as spare part easily exchangeable during service, UPS electronics remain mounted and are reused

UPS can be mounted on a DIN rail or at the rear panel of the control cabinet

connection option for a main device (e.g. Industrial PC) and a secondary device (e.g. Control Panel)

short-circuit protected outputs

automatic switch-oﬀ based on time or residual energy control to protect the energy module

automatic restart when power is restored (autonomous start)

protocol-based communication with Industrial PC, optionally via OCT (One Cable Technology) or USB

digital signals for communication with non-protocol-capable end devices

parameterization and diagnostics via Beckhoﬀ UPS software on various operating systems

TwinCAT PLC function blocks for querying the UPS operation

The three diagnostic LEDs show the status of the input voltage, the output voltage, and the state of charge and indicate

possible error states.

Technical changes reserved

As of 18.05.2021 | Site 1 of 3

CU8130-0120

https://www.beckhoﬀ.com/cu8130-0120

A special feature of the Beckhoﬀ CU81xx devices is OCT (One Cable Technology) as communication technology between UPS

and Industrial PC. This means that the two connecting lines (+24 V, 0 V) between the Industrial PC and the UPS are used not

only to supply the Industrial PC, but also for bidirectional, modulated data transmission. If both sides are OCT-capable, no

further connection, e.g., via USB, is required. This simpliﬁes cabling and also allows longer connection distances compared to

USB.

All UPS devices of the CU81xx series have permanent wiring via two 9-pin plugs, so that the wiring does not have to be

disconnected during service.

Note: Please refer to the product documentation for the retention times that can be achieved with the UPS and important

information on installation and safe operation of the devices.

Product information

Technical Data

Technical data

Type

CU8130-0120

battery-backed uninterruptible power supply (UPS), 110 W

metal housing for mounting on norm rail TS35x15 2.3

NiMh (battery)

Housing

Storage technology

requires Windows Embedded Standard 7, Windows 7 Professional, Windows 7 Ultimate

or Windows 10 IoT Enterprise

Operating system

Interfaces

USB, USB cable not included in the scope of supply

Information: The UPS with UPS OCT via 24 V DC power supply module is expected to be

available from Q4 2021.

1 x U , 1 x U , 1 x DIAG

Diagnostics LED

Protection class

Operating temperature

Weight

OUT

IP 20

-10…+50 °C

approx. 800 g

60 mm x 100 mm x 90 mm

min. 24 V DC

Dimensions (W x H x D)

Output voltage

Power supply

24 V DC (-15 %/+20 %)

120 W

Max. power consumption

Max. power output

Capacity

110 W

15 Wh

Connection

2 x 9-pin plug, push-in

electronic, 5 A

Fuse

Accessories

C9900-M675

mounting plate made of black anodized aluminium for mounting the UPS on the control

cabinet wall, suitable for CU8110-0120, CU8130-0120 and CU8130-0240

Technical changes reserved

As of 18.05.2021 | Site 2 of 3

CU8130-0120

https://www.beckhoﬀ.com/cu8130-0120

C9900-U015

C9900-P950

spare battery module, 15 Wh, suitable for CU8130-0120

Spare connector for the power supply of the CU81xx UPS series. Two 9-pin connectors

with push-in connection for cables with a cross-section of 0.14 mm² to 1.5 mm² or

AWG26 to AWG16.

C9900-K552

C9900-K553

C9900-K554

connecting cable USB 2.0 A-B, 3 m

connecting cable USB 2.0 A-B, 5 m

connecting cable USB 2.0 A-B, 1 m

Technical changes reserved

As of 18.05.2021 | Site 3 of 3

相关型号：