CX2033-N031-0002 [BECKHOFF]

Basic CPU module;


型号：	CX2033-N031-0002
厂家：	Beckhoff
描述：	Basic CPU module
文件：	总4页 (文件大小：178K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

CX2033

https://www.beckhoﬀ.com/cx2033

CX2033 | Basic CPU module

Status LEDs

Ethernet and USB connection

Battery

compartment

(behind the ﬂap)

CFast

DVI D connection

Multi optional interface

(e.g. RS232, PROFIBUS,

CANopen)

Product status: Regular delivery

The CX2033 is a modularly expandable Embedded PC for DIN rail mounting and has an AMD Ryzen™ V1202B CPU with a clock

speed of 2.3 GHz and two cores. The power supply unit required for operation enables the direct use and connection of all

Beckhoﬀ I/O components to this CPU module.

The TwinCAT automation software turns the CX2033 system into a high-performance PLC and Motion Control system that can

be used with or without visualization. Both TwinCAT 2 in 32-bit mode and the latest TwinCAT 3 version in 64-bit mode are

supported. Continuing support for TwinCAT 2 by the CX2033 and CX2043 guarantees investment protection for projects and

systems that were or will be created with this 32-bit generation.

The devices from the CX20x3 series are characterized by outstanding real-time characteristics under the highest computing

loads. This enables deterministic processing with short cycle times on the individual cores of the CPUs.

The basic equipment of the hardware includes two independent Gbit-Ethernet interfaces, four USB 3.1 Gen. 2 ports, one DVI-

D interface, and a multi-option interface that can be equipped ex factory with a ﬂexible choice of further interfaces (e.g.,

serial port, ﬁeldbus, or second video connection).

The internal RAM size is 8 GB; up to 16 GB are also optionally possible. The controller boots from the CFast card and has an

internal 128 kB NOVRAM for use as a persistent data memory.

The CX2033 is fanless and has no rotating components. Cooling takes place by passive thermal convection.

The operating system employed is Microsoft Windows 10 IoT Enterprise 2019 LTSC, optionally in the 32-bit or 64-bit version.

Other components from the CX2000 family can be connected via the multi-pin terminals on either side. Up to four modules of

the type CX2500-xxxx can be connected on the left side of the basic CPU module. The connection order is irrelevant. Internally,

the modules are connected via PCI Express and can be plugged to the CPU in the ﬁeld.

Technical changes reserved

As of 30.08.2021 | Site 1 of 4

CX2033

https://www.beckhoﬀ.com/cx2033

Modules of the type CX2550 (e.g., hard disks/SSD modules) and a power supply unit of the type CX2100-xxxx can be

connected on the right. The power supply unit supplies power to the entire system of CPU module and all plugged optional

components. All Beckhoﬀ EL and KL terminals can be connected directly to the power supply unit. A compact unit comprising

controller and I/O level is thus created on the DIN rail.

The extended operating temperature range from -25°C to +60°C enables the CX2033 to be used under climatically

challenging conditions.

Product information

Technical Data

Technical data

Processor

CX2033

AMD Ryzen™ V1202B 2.3 GHz

Number of cores

Flash memory

Main memory

Persistent memory

Interfaces

slot for CFast card

8 GB DDR4 RAM (expandable ex factory to 16 GB)

128 KB NOVRAM integrated

2 x RJ45, 10/100/1000 Mbit/s, 1 x DVI-D, 4 x USB 3.1 Gen. 1, 1 x optional interface

passive cooling, optionally with active cooling ex factory

1 x power, 1 x TC status, 1 x ﬂash access, 2 x bus status

internal battery-backed clock for time and date (battery exchangeable)

Windows 10 IoT Enterprise 2019 LTSC, TwinCAT/BSD

Cooling

Diagnostics LED

Clock

Operating system

TwinCAT 2 runtime

TwinCAT 3 runtime (XAR)

Control software

I/O connection

via power supply module (E-bus or K-bus, automatic recognition)

Power supply

24 V DC (-15 %/+20 %)

42 W

Max. power consumption

Dimensions (W x H x D)

Weight

144 mm x 99 mm x 91 mm

approx. 1165 g

Operating/storage temperature

Relative humidity

-25…+60 °C/-40…+85 °C

95 %, no condensation

conforms to EN 60068-2-6/EN 60068-2-27

conforms to EN 61000-6-2/EN 61000-6-4

IP 20

Vibration/shock resistance

EMC immunity/emission

Protection class

Approvals/markings

CE, UL

Performance Plus (50); please see here for an overview of all the TwinCAT 3 platform

level

TwinCAT 3 platform level

Ordering Information

Technical changes reserved

As of 30.08.2021 | Site 2 of 4

CX2033

https://www.beckhoﬀ.com/cx2033

Ordering information

CX2033-0100

CX2033-0160

CX2033-0161

CX2033-0162

CX2033-0163

CX2033-0170

CX2033-0175

CX2033-0185

no operating system, no TwinCAT

Windows 10 IoT Enterprise 2019 LTSC 32 bit, no TwinCAT

Windows 10 IoT Enterprise 2019 LTSC 32 bit, TwinCAT 2 PLC runtime

Windows 10 IoT Enterprise 2019 LTSC 32 bit, TwinCAT 2 NC PTP runtime

Windows 10 IoT Enterprise 2019 LTSC 32 bit, TwinCAT 2 NC I runtime

Windows 10 IoT Enterprise 2019 LTSC 64 bit, no TwinCAT

Windows 10 IoT Enterprise 2019 LTSC 64 bit, TwinCAT 3 runtime (XAR)

TwinCAT/BSD, TwinCAT 3 runtime (XAR)

CX20x3-016x: only 4 GB RAM can be used with Windows 10 IoT Enterprise 2019 LTSC 32 Bit

TwinCAT/BSD requires a CFast ﬂash card with a minimum capacity of 20 GB

Windows 10 IoT Enterprise requires a CFast ﬂash card with a minimum capacity of 40 GB.

TwinCAT 3 runtime (XAR) is preinstalled, without licenses. Please order TwinCAT 3 licenses separately from the TwinCAT 3 Price List.

Options

Operating system preequipped on 2½-inch HDD/SSD for CX20x0, CX20x2 and CX20x3.

Requires the extension module CX2550-0020 and one 2½-inch HDD/SSD.

CX2900-0010

“Active cooling”: factory conversion of the CX2033 CPU module for active cooling in order

to enable ﬂexible

CX2900-0301

installation positions (see documentation). Active cooling takes place via a fan cartridge.

This option requires the use of a power supply unit type CX2100-0014 or CX2100-0914.

Memory extension to 16 GB DDR4 RAM, instead of 8 GB DDR4 RAM for CX2033 and

CX2043. For the CX2033 this extension reduces the maximum permissible ambient

CX2900-0305

temperature to 50 °C. For operation of the CX2033 up to 60 °C the active cooling CX2900-

0301 is required.

Optional interfaces

DVI-D interface, additional DVI-D port for clone or extended display mode.

Is not supported by TwinCAT/BSD.

CX2033-N010

DisplayPort interface, additional DisplayPort for clone or extended display mode.

Is not supported by TwinCAT/BSD.

CX2033-N011

CX2033-N030

CX2033-N031

RS232 interface, D-sub plug, 9-pin

RS485 interface, D-sub socket, 9-pin, conﬁguration as an end point, without echo,

termination on

RS485 interface, D-sub socket, 9-pin, conﬁguration as an end point, with echo,

termination on

CX2033-N031-0001

CX2033-N031-0002

CX2033-N031-0003

RS485 interface, D-sub socket, 9-pin, conﬁguration as drop point, without echo,

termination oﬀ

RS485 interface, D-sub socket, 9-pin, conﬁguration as drop point, with echo, termination

oﬀ

Technical changes reserved

As of 30.08.2021 | Site 3 of 4

CX2033

https://www.beckhoﬀ.com/cx2033

RS422 interface, D-sub socket, 9-pin, conﬁguration as full duplex end point, termination

CX2033-N031-0004

CX2033-M112

CX2033-B110

CX2033-M310

CX2033-B310

CX2033-M510

CX2033-B510

CX2033-M930

CX2033-B930

2 x EtherCAT master interface

EtherCAT slave interface, EtherCAT IN and OUT (2 x RJ45)

PROFIBUS master interface, D-sub socket, 9-pin

PROFIBUS slave interface, D-sub socket, 9-pin

CANopen master interface, D-sub plug, 9-pin

CANopen slave interface, D-sub plug, 9-pin

PROFINET RT, controller interface, Ethernet (2 x RJ45 switch)

PROFINET RT, device interface, Ethernet (2 x RJ45 switched)

EtherNet/IP adapter interface, Ethernet (2 x RJ45 switched)

Availability: on request

CX2033-B950

Accessories

CX2900-0038

CX2900-0040

CX2900-0042

CX2900-0101

CX2900-0102

40 GB CFast card, 3D ﬂash, extended temperature range

80 GB CFast card, 3D ﬂash, extended temperature range

160 GB CFast card, 3D ﬂash, extended temperature range

Housing locking clips

Cover for left-side module bus connector, 5 pieces

Spare fan cartridge for CX2040, CX2042, CX2043, CX2062, CX2072 and CX2020, CX2030,

CX2033 with fan option

– cartridge consisting of chassis and 60 mm fan

– simple exchange in the ﬁeld due to wireless installation

– dimensions (W x H x D) 67 x 62 x 16 mm

CX2900-0103

CX1900-0102

Spare battery suitable for CX10x0, CX81x0, CX50x0, CX51x0, CX52x0, CX90x0, CX20xx

– lithium button cell type CR2032, 3V/225 mAh

– follow polarity when installing

Technical changes reserved

As of 30.08.2021 | Site 4 of 4

相关型号：