DSP1N5D5 [BEL]
DC-DC Regulated Power Supply Module, 2 Output, 0.75W, Hybrid, SIP-5;型号: | DSP1N5D5 |
厂家: | BEL FUSE INC. |
描述: | DC-DC Regulated Power Supply Module, 2 Output, 0.75W, Hybrid, SIP-5 输出元件 |
文件: | 总2页 (文件大小:232K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DSP1 SERIES
DUAL OUTPUT
DESCRIPTION
FEATURES
The DSP1 Series is specifically designed to convert a nominal 5
volt input into two isolated output voltages. The dual semi-
regulated output voltages are designed to allow analog circuits and
three terminal regulators to operate within their most efficient
input voltage range. This series achieves high power densities
through the use of 350KHz fixed frequency switching converters.
• Up to 1 Watt Unregulated Output Power
• Single In Line Package
• Four Terminal Operation
• Efficiencies to 70%
• Output Voltages: 5V, 7V, 12V, 14V, 15V, 17V
• 700V Isolation
• -40°C to +85°C Operation
FRONT VIEW
0.40
(10.16)
RT
SIDE
VIEW
0.02
(0.51)
0.000
1
2
3
4
5
PINS: 0.02 (0.51) x 0.01 (0.25)
LENGTH (TYPICAL): 0.15 (3.81)
Mechanical tolerances unless otherwise noted:
X.XX dimensions: 0.020 inches
X.XXX dimensions: 0.010 inches
DSP1 SERIES APPLICATION NOTES:
External Capacitance Requirements
Output filtering is required for operation. A minimum of 10ꢀF is
specified for optimal performance. Output capacitance may be
increased for additional filtering, and should not exceed 400ꢀF. To
meet the reflected ripple requirements of the converter, an input
impedance of less than 0.5 Ohms from DC to 350KHz is required. If
a capacitive input source is farther than 2” from the converter, it is
recommended to use a 10ꢀF, 25V solid tantalum capacitor.
NOTES
(1) All parameters measured at Tc=25 °C case temperature, nominal input voltage and full rated load
unless otherwise noted.
(2) Derate output power linearly to 0.6 watts from 70°C to 85°C.
Regulation
This converter uses a semi-regulated design. The output will vary as
the load is changed, with output decreasing with increasing load.
Additionally, output voltage will change in proportion to a change
in input voltage. The typical output voltage will change 1% for each
1% change in input voltage.
Rev. 04/2000
1
DSP1 SERIES – DUAL OUTPUT
OUTPUT POWER DERATING
DSP1 SERIES BLOCK DIAGRAM
1
0.8
0.6
0.4
+ INPUT
1
2
5
4
3
+ OUTPUT
CMN
OSCILLATOR
DRIVER
– OUTPUT
– INPUT
50
60
70
80
90
100
AMBIENT TEMPERATURE
Typical Performance: (Tc=25°C)
EFFICIENCY Vs. LOAD
LINE REGULATION
LOAD REGULATION
80
75
15
10
10
8
6
4
2
0
70
65
60
55
50
5
0
-5
-2
-4
-6
-10
-15
4.50
0
10 20 30 40 50 60 70 80 90 100
4.75
5.00
5.25
5.50
0
10 20 30 40 50 60 70 80 90 100
LOAD (%)
INPUT VOLTAGE (VDC)
OUTPUT LOAD (%)
INPUT CURRENT Vs. INPUT VOLTAGE
0.30
0.25
0.20
0.15
0.10
0.05
0.00
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
INPUT VOLTAGE (VDC)
For the Most Up-To-Date Information
www.power-one.com
24 Hours/Day—7 Days/Week
NUCLEAR AND MEDICAL APPLICATIONS Power-One products are not authorized for use as critical components in life support systems, equipment used in hazardous environments,
or nuclear control systems without the express written consent of the President of Power-One, Inc.
TECHNICAL REVISIONS The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are
subject to change without notice.
2
相关型号:
©2020 ICPDF网 联系我们和版权申明