HPT015ZEJJ-AS193V [BEL]
DC-DC Regulated Power Supply Module, 3 Output, 15W, Hybrid;型号: | HPT015ZEJJ-AS193V |
厂家: | BEL FUSE INC. |
描述: | DC-DC Regulated Power Supply Module, 3 Output, 15W, Hybrid 输出元件 |
文件: | 总3页 (文件大小:106K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ꢀꢀ
ꢀꢀ
(888) IPD-CONVerters
(888) 473-2668
www.ipdconverters.com
HPT SERIES - TRIPLE OUTPUT, 15 WATT
DESCRIPTION
FEATURES
• Triple Output 2” X 2”
• Open-Frame Packaging
• 2.5 Million Hours MTBF • 3-1 Wide Voltage
• Short Circuit and
Overvoltage Protection
• 500V Isolation
• Input Undervoltage
Lockout
HPT triple output DC/DC converters provide
15 Watts of output power in an industry standard
package. HPT’s feature excellent efficiency and
industry-leading power density. The HPT has open-
frame packaging to provide maximum useable power
with minimal thermal constraints. These units are
fully compatible with production board washing
processes.
Input
• 100°C Baseplate
Operation
TECHNICAL SPECIFICATIONS
Input
Voltage Range
24 VDC Nominal
48 VDC Nominal
48 VDC Wide
10 - 30 VDC
34 - 75 VDC
20 - 60 VDC
Output
Setpoint Accuracy
Auxiliary Setpoint Accuracy
±1%
5%
Line Regulation Vin Min. - Vin Max., Iout Rated
Load Regulation Iout Min. - Iout Max., Vin Nom.
Minimum Output Current
±1% Vout
±1% Vout
10 % Iout Rated
25% Iout
Dynamic Regulation, Loadstep
Pk Deviation
1% Vout
Settling Time
250 µs
Ripple and Noise w/ 25 MHz BW, Pk-Pk / RMS
Current Limit Type
1% / 0.3% Vout
Hiccup
Current Limit Threshold Range, % of Iout Rated
110 - 140%
Short Circuit Current Max.
200% Iout Nom.
OVP Trip Range
OVP Type
110 - 140% Vout Nom.
Second Control Loop
General
Switching Frequency
Isolation
Input - Output
Input - Case
Output - Case
Temperature Coefficient
Case Temperature
Operating Range
200 kHz
Notes
For negative logic, add suffix “N” to model number.
500 VDC
500 VDC
500 VDC
1
†
MTBF predictions may vary slightly from model to model.
0.02 ppm/°C
Specifications typically at 25°C, normal line, and full load, unless otherwise stated.
-40 to +100°C
-40 to +125°C
105 to 115°C
95%
Storage Range
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with
commercial wave-soldering equipment.
Thermal Shutdown Range
Humidity Max., Non-Condensing
Vibration, 3 Axes, 5 Min Each
MTBF† (Bellcore TR-NWT-000332)
Safety
Safety: Agency approvals may vary from model to model. Please consult factory
for specific model information.
2 g
2.5 x 106 hrs
Consult Factory
0.85 oz
Units are water-washable and fully compatible with commercial spray or immersion
post wave-solder washing equipment.
Weight (approx.)
1
HPT SERIES - TRIPLE OUTPUT, 15 WATT
MODELS - (See the last page of this file for options.)
Vin
(Volts)
Vin Range
(Volts)
Iin Max.*
(Amps)
Vout
(Volts)
Iout Rated
(Amps)
Ripple & Noise
Pk-Pk (mV)
Efficiency
Typ. **
Model
24
24
24
24
48
48
48
48
48 WIDE
48 WIDE
48 WIDE
48 WIDE
18 - 36
18 - 36
18 - 36
18 - 36
34 - 75
34 - 75
34 - 75
34 - 75
20 - 60
20 - 60
20 - 60
20 - 60
1.90
1.90
1.84
1.84
0.56
0.56
0.54
0.54
0.95
0.95
0.92
0.92
3.3, –12
3.3, –15
5, –12
2.3, –0.31
2.3, –0.25
1.5, –0.31
1.5, –0.25
2.3, –0.31
2.3, –0.25
1.5, –0.31
1.5, –0.25
2.3, –0.31
2.3, –0.25
1.5, –0.31
1.5, –0.25
100, –200
100, –200
100, –200
100, –200
100, –200
100, –200
100, –200
100, –200
100, –200
100, –200
100, –200
100, –200
80%
80%
83%
83%
80%
80%
83%
83%
80%
80%
83%
83%
HPT015YEHH-A
HPT015YEJJ-A
HPT015YGHH-A
HPT015YGJJ-A
HPT015ZEHH-AS1
HPT015ZEJJ-AS1
HPT015ZGHH-AS1
HPT015ZGJJ-AS1
HPT015ZEHH-A
HPT015ZEJJ-A
HPT015ZGHH-A
HPT015ZGJJ-A
5, –15
3.3, –12
3.3, –15
5, –12
5, –15
3.3, –12
3.3, –15
5, –12
5, –15
Denotes advanced product release. Consult factory for product availability.
* Maximum input current at minimum input voltage, maximum rated output power.
** At nominal Vin, rated output.
MECHANICAL DRAWING
Thermal Impedance
Pin
Tolerances
(Milli
.XX ± 0.020
.XXX ± 0.010
Function
Natural Convection
100 LFM
11.2 °C/W
9.6 °C/W
6.8 °C/W
5.1 °C/W
4.2 °C/W
Inches:
meters)
.X ± 0.5
.XX ± 0.25
1
2
3
4
5
6
+Vin
-Vin
200 LFM
300 LFM
+Vout
+Vout
-Vout
-Vout
400 LFM
Pin:
± 0.002
± 0.05
Note:
Thermal impedance data is dependent on
many environmental factors. The exact
thermal performance should be validated for
specific application.
(Dimensions as listed unless otherwise
specified.)
2
OPTIONS
When ordering equipment options, use the following suffix information. Select the option(s) that you prefer
and add them to the model number. Example ordering options are located below the options table.
OPTION
Negative Logic
SUFFIX
APPLICABLE SERIES
REMARKS
N
HAS, HBD, HBS, HES, HLS, HLD, LES,
QBS, QES, QLS, TES, TQD
TTL "Low" Turns Module ON
TTL "High" Turns Module OFF
Lucent-Compatible Trim
T
HAS, HBD, HBS, HES, HLS, QBS, QES,
QLS
Terminal Strip
Trim
TS
1
XWS, XWD, XWT
IAS, LES
Enable
2
IAD, IAS, LES, SMS
IAS, LES
Trim and Enable
3
Pin Length and Heatsink Options
0.110" (2.8mm) Pin Length
Standard Pin Length is 0.180" (4.6mm)
8
9
All Leaded Models
All Leaded Models
0.150" (3.8mm) Pin Length
0.24" (6.1mm) Horizontal Heatsink
1H
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks
(Except HLS, HLD, QLS, TLD, and TKD Packages)
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
0.24" (6.1mm) Vertical Heatsink
0.45" (11.4mm) Horizontal Heatsink
0.45" (11.4mm) Vertical Heatsink
0.95" (24.1mm) Horizontal Heatsink
0.95" (24.1mm) Vertical Heatsink
1V
2H
2V
3H
3V
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks
(Except HLS, HLD, QLS, TLD, and TKD Packages)
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks
(Except HLS, HLD, QLS, TLD, and TKD Packages)
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks
(Except HLS, HLD, QLS, TLD, and TKD Packages)
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks
(Except HLS, HLD, QLS, TLD, and TKD Packages)
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks
(Except HLS, HLD, QLS, TLD, and TKD Packages)
Example Options:
HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent-compatible trim, and 0.95” vertical heatsink.
LES015YJ-3N = LES015YJ with optional trim and enable, negative logic.
QBS066ZG-AT8 = QBS066ZG-A with Lucent-compatible trim and 0.110” pin length.
NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not authorized for use as critical components in life support systems,
equipment used in hazardous environments, or nuclear control systems without the express written consent of the respective divisional President
of Power-One, Inc.
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date
manufactured. Specifications are subject to change without notice.
REV. AUG 16, 2002
3
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明