IAD012YJJ-22H [BEL]
DC-DC Regulated Power Supply Module, 2 Output, 12W, Hybrid;型号: | IAD012YJJ-22H |
厂家: | BEL FUSE INC. |
描述: | DC-DC Regulated Power Supply Module, 2 Output, 12W, Hybrid 输出元件 |
文件: | 总3页 (文件大小:107K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
IAD SERIES - DUAL OUTPUT, 12 WATT
DESCRIPTION
FEATURES
• Industry Standard
• Optional Trim and
Enable
• Wide Range Input
• 1500V Isolation
• Short Circuit Protection
IAD dual output DC/DC converters provide up to 12 watts
of output power in an industry-standard package and
footprint. With a maximum case temperature of 85°C, the
IAD is well suited for the most demanding applications.
The IAD features 1500 VDC isolation, short circuit, and
overtemperature protection, as well as six-sided shielding.
The IAD is available with optional enable and voltage
trim pins. Please see the IAS series for single output
applications.
Package
• Industry Standard
Footprint
• Fixed Frequency Design
• 85°C Case Operation
TECHNICAL SPECIFICATIONS
Input
Voltage Range
24 VDC Nominal
48 VDC Nominal
Reflected Ripple
Input Reverse Voltage Protection
18 - 36 VDC
34 - 75 VDC
25 mA
Shunt Diode
Efficiency vs. Load (48V Input)
Output
90
85
80
75
70
65
60
55
50
Setpoint Accuracy
1ꢀ
5 ꢀ
Auxillary Setpoint Accuracy
Line Regulation V Min. - V Max., I
Rated
0.5ꢀ V
1.0ꢀ V
in
in
out
out
Load Regulation I
Min. - I
Max., V Nom.
out
out
in
out
Minimum Output Current
10 ꢀ I
Rated
out
Dynamic Regulation, Loadstep
Pk Deviation
Settling Time
Voltage Trim Range
Short Circuit % Overcurrent Protection
Power Limit Threshold Range
25ꢀ I
4ꢀ V
out
out
EFF. IAD010ZGG
EFF. IAD012ZHH
EFF. IAD012ZJJ
500
µ
s
10ꢀ
Hiccup
110 - 150ꢀ
10
20
30
40
50
60
70
80
90
100
LOAD %
General
Turn-On Time
Remote Shutdown
Switching Frequency
Isolation
300 ms
Positive Logic
400 kHz
Notes
†
MTBF predictions may vary slightly from model to model.
Industrial temp range available
††
Input - Output
1500 VDC
500 VDC
1050 VDC
0.03ꢀ%/C
Output - Case (for 48 V
Input - Case (for 24 V
Temperature Coefficient
Case Temperature
Operating Range
Storage Range
)
in
Specifications typically at 25/C, normal line, and full load, unless otherwise
stated.
)
in
Soldering Conditions: I%O pins, 260/C, ten seconds; fully compatible with
commercial wave-soldering equipment.
-40 To +85/C
-40 To +110/C
95ꢀ
Humidity Max., Non-Condensing
Vibration, 3 Axes, 5 Min Each
MTBF† (Bellcore TR-NWT-000332)
Safety
Safety: Agency approvals may vary from model to model. Please consult
factory for specific model information.
5 g, 10 - 55 Hz
6
1.8 X 10 hrs
UL, cUL, VDE
1.2 oz
Units are water-washable and fully compatible with commercial spray or
immersion post wave-solder washing equipment.
Weight (Approx.)
Rev. AUG 21, 2002
1
IAD SERIES - DUAL OUTPUT, 12 WATT
MODELS - (See the last page of Section for options.)
INPUT VOLTAGE
(VOLTS)
INPUT VOLTAGE
RANGE (VOLTS)
MAXIMUM INPUT
CURRENT (AMPS)*
OUTPUT
VOLTAGE (VOLTS)
RATED OUTPUT
CURRENT (AMPS)
RIPPLE & NOISE
pk-pk (mV)
TYPICAL
EFFICIENCY**
MODEL
IAD012YHH
IAD012YJJ
IAD010ZGG
IAD012ZHH
IAD012ZJJ
24
24
48
48
48
18-36
18-36
34-75
34-75
34-75
0.85
0.85
0.40
0.43
0.42
12
15
5
12
15
0.5
0.4
1.0
0.5
0.4
120
150
75
120
150
82%
83%
78%
82%
83%
NOTES: * Maximum input current at minimum input voltage, maximum rated output power.
** At nominal V , rated output.
in
MECHANICAL DRAWING
Tolerances
Pin
Function
Thermal Impedance
Inches:
.XX 0.020
.XXX 0.010
(Millimeters)
.X 0.5
.XX 0.25
Natural Convection
15.4 /C%W
12.2 /C%W
9.3 /C%W
7.4 /C%W
6.4 /C%W
1
+V
in
100 LFM
200 LFM
300 LFM
400 LFM
2
3
-V
in
Optional
Pin:
0.002
Shutdown
0.05
4
+V
out
Note:
Case:
+ 0.04, - 0.00
5
6
Common
Thermal impedance data is dependent on
many environmental factors. The exact
thermal performance should be validated
for specific application.
+ 1.0, - 0.0
-V
out
(Tolerances as listed unless otherwise
specified.)
Rev. AUG 21, 2002
2
OPTIONS
When ordering equipment options, use the following suffix information. Select the option(s) that you prefer
and add them to the model number. Example ordering options are located below the options table.
OPTION
Negative Logic
SUFFIX
APPLICABLE SERIES
REMARKS
N
HAS, HBD, HBS, HES, HLS, HLD, LES,
QBS, QES, QLS, TES, TQD
TTL "Low" Turns Module ON
TTL "High" Turns Module OFF
Lucent-Compatible Trim
T
HAS, HBD, HBS, HES, HLS, QBS, QES,
QLS
Terminal Strip
Trim
TS
1
XWS, XWD, XWT
IAS, LES
Enable
2
IAD, IAS, LES, SMS
IAS, LES
Trim and Enable
3
Pin Length and Heatsink Options
0.110" (2.8mm) Pin Length
Standard Pin Length is 0.180" (4.6mm)
8
9
All Leaded Models
All Leaded Models
0.150" (3.8mm) Pin Length
0.24" (6.1mm) Horizontal Heatsink
1H
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks
(Except HLS, HLD, QLS, TLD, and TKD Packages)
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
0.24" (6.1mm) Vertical Heatsink
0.45" (11.4mm) Horizontal Heatsink
0.45" (11.4mm) Vertical Heatsink
0.95" (24.1mm) Horizontal Heatsink
0.95" (24.1mm) Vertical Heatsink
1V
2H
2V
3H
3V
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks
(Except HLS, HLD, QLS, TLD, and TKD Packages)
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks
(Except HLS, HLD, QLS, TLD, and TKD Packages)
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks
(Except HLS, HLD, QLS, TLD, and TKD Packages)
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks
(Except HLS, HLD, QLS, TLD, and TKD Packages)
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks
(Except HLS, HLD, QLS, TLD, and TKD Packages)
Example Options:
HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent-compatible trim, and 0.95” vertical heatsink.
LES015YJ-3N = LES015YJ with optional trim and enable, negative logic.
QBS066ZG-AT8 = QBS066ZG-A with Lucent-compatible trim and 0.110” pin length.
NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not authorized for use as critical components in life support systems,
equipment used in hazardous environments, or nuclear control systems without the express written consent of the respective divisional President
of Power-One, Inc.
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date
manufactured. Specifications are subject to change without notice.
REV. AUG 16, 2002
3
相关型号:
©2020 ICPDF网 联系我们和版权申明