首页 |元器件品牌

PFC375-1015G [BEL]

Greater than 1 million hours demonstrated MTBF;
PFC375-1015G
型号： PFC375-1015G
厂家： BEL FUSE INC.    BEL FUSE INC.
描述：

Greater than 1 million hours demonstrated MTBF
文件： 总6页 (文件大小：691K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
The PFC375 products of the PerFormanCe Power Series incorporate  
high performance midrange power, active Power Factor Correction  
(PFC), and high reliability to meet varied commercial and industrial  
requirements.  
Providing tightly-regulated DC power in a wide variety of single and  
multiple output configurations, the PFC375 is designed to provide full  
output power with only 300 Linear Feet per Minute (LFM) forced-air  
cooling (factory installed fan optional). Other features include remote  
sense, power fail, logic level inhibit, and DC power good. Main channel  
current sharing is provided for redundant applications. The PFC375 is  
available with SAE mountings or optional metric mountings.  
The PFC375 product line is approved to the latest international  
regulatory standards and displays the CE Mark.  
RoHS Compliant  
•
•
•
•
•
•
•
•
•
•
Greater than 1 million hours demonstrated MTBF  
Power Factor Correction (PFC) meets EN61000-3-2  
Fully-regulated outputs  
Main output remote sense  
Current Share, Power Fail, and Power Good signals  
Overtemperature, overvoltage, and overcurrent protected  
Available with metric and SAE mountings  
Input transient & ESD compliance to EN61000-4-2/-3/-4/-5  
Fan output voltage and optional fan  
2
PFC375 Series  
OUTPUT  
VOLTAGE  
ADJUSTMENT  
RANGE  
MAX. OUTPUT  
CURRENT 1  
LINE  
REGULATION  
LOAD  
REGULATION  
RIPPLE &  
INITIAL SETTING  
ACCURACY  
MODEL  
NOISE % p-p 2  
PFC375-1012G  
PFC375-1015G  
PFC375-1024G  
PFC375-1028G  
PFC375-1048FG  
12V  
15V  
24V  
28V  
48V  
10.8V to 13.5V  
12.0V to 17.0V  
21.6V to 26.4V  
25.2V to 30.8V  
46.0V to 56.0V  
30A  
25A  
0.2%  
0.2%  
0.5%  
0.5%  
0.5%  
0.8%  
0.6%  
0.8%  
0.9%  
1.0%  
1%  
1%  
11.94V to 12.06V  
14.94V to 15.06V  
23.88V to 24.12V  
27.86V to 28.14V  
47.52V to 48.48V  
15A  
1%  
13.4A  
7.8A  
0.9%  
1%  
NOTES:  
1
Output currents ratings are expressed with 300 LFM forced air.  
Maximum peak-to-peak noise expressed as a percentage of output voltage, 20 MHz bandwidth.  
Models without suffix G use the lead solder exemption  
2
3
Ooo Model numbers highlighted in yellow are not recommended for new designs or EOL.  
Isolated V3 and V4 Can Be Used as Positive Or Negative Output  
OUTPUT  
VOLTAGE  
ADJUSTMENT  
RANGE  
OUTPUT PEAK OUTPUT  
LINE  
REGULATION  
LOAD  
REGULATION  
RIPPLE &  
INITIAL SETTING  
ACCURACY  
MODEL  
CURRENT1  
CURRENT3  
NOISE % p-p2  
+5V  
+12V  
12V  
5V  
4.5V to 5.5V  
11.3V to 12.6V  
11.3V to 12.6V  
Fixed  
3.5 - 40A  
40A  
0.4%  
0.9%  
0.9%  
2%  
0.8%  
1%  
4.98V to 5.02V  
11.9V to 12.1V  
11.9V to 12.1V  
4.9V to 5.1V  
10A  
6A  
16A  
6A  
0.9%  
0.9%  
2%  
1%  
1%  
PFC375-4000G  
3A  
3A  
2.4%  
1%  
+5V  
+12V  
12V  
4.5V to 5.5V  
11.3V to 12.6V  
11.3V to 12.6V  
3.5 - 40A  
10A  
40A  
16A  
6A  
0.4%  
0.9%  
0.9%  
0.8%  
0.9%  
0.9%  
4.98V to 5.02V  
11.9V to 12.1V  
11.9V to 12.1V  
1%  
PFC375-4001G4  
6A  
1%  
12V  
+5V  
+12V  
12V  
24V  
+5V  
+12V  
15V  
15V  
+5V  
+12V  
24V  
24V  
+24V  
+5V  
12V  
12V  
+24V  
+5V  
15V  
15V  
+5V  
+12V  
12V  
5V  
11.0V to 15.8V  
4.5V to 5.5V  
3A  
3.5 - 40A  
10A  
3A  
0.9%  
0.4%  
0.9%  
0.9%  
0.5%  
0.4%  
0.9%  
0.7%  
0.7%  
0.4%  
0.9%  
0.5%  
0.5%  
0.5%  
0.4%  
0.5%  
0.5%  
0.5%  
0.4%  
0.5%  
0.5%  
0.4%  
0.9%  
0.9%  
2%  
0.9%  
0.8%  
0.9%  
0.9%  
0.8%  
0.8%  
0.9%  
0.7%  
0.7%  
0.8%  
0.9%  
0.8%  
0.8%  
0.8%  
0.8%  
1%  
1%  
1%  
1%  
1%  
1%  
1%  
1%  
1%  
1%  
1%  
1%  
1%  
1%  
1%  
1%  
1%  
1%  
1%  
1%  
1%  
1%  
1%  
1%  
1%  
1%  
11.9V to 12.1V  
4.98V to 5.02V  
11.9V to 12.1V  
11.9V to 12.1V  
23.8V to 24.2V  
4.98V to 5.02V  
11.9V to 12.1V  
14.9V to 15.1V  
14.9V to 15.1V  
4.98V to 5.02V  
11.9V to 12.1V  
23.8V to 24.2V  
23.8V to 24.2V  
23.8V to 24.2V  
4.98V to 5.02V  
11.9V to 12.1V  
11.9V to 12.1V  
23.8V to 24.2V  
4.98V to 5.02V  
14.9V to 15.1V  
14.9V to 15.1V  
4.98V to 5.02V  
11.9V to 12.1V  
11.9V to 12.1V  
4.9V to 5.1V  
40A  
16A  
6A  
11.3V to 12.6V  
11.3V to 12.6V  
22.0V to 28.0V  
4.5V to 5.5V  
PFC375-4002G5  
PFC375-4004G  
PFC375-4005G6  
PFC375-4200G  
PFC375-4201G  
PFC375-4500G  
6A  
3A  
3A  
3.5 - 40A  
10A  
40A  
16A  
4A  
11.3V to 12.6V  
14.2V to 15.8V  
14.2V to 15.8V  
4.5V to 5.5V  
4A  
4A  
4A  
3.5 - 40A  
10A  
40A  
16A  
3A  
11.3V to 12.6V  
22.0V to 28.0V  
22.0V to 28.0V  
21.5V to 26.4V  
4.5V to 5.5V  
3A  
3A  
3A  
1 - 10A  
10A  
10A  
16A  
4A  
11.4V to 12.6V  
11.4V to 12.6V  
21.5V to 26.4V  
4.5V to 5.5V  
4A  
4A  
4A  
1%  
1 - 10A  
10A  
10A  
16A  
4A  
0.8%  
0.8%  
0.8%  
0.8%  
0.8%  
0.9%  
0.9%  
0.9%  
14.2V to 16.0V  
13.7V to 16.0V  
4.5V to 5.5V  
4A  
4A  
4A  
3.5 - 50A  
10A  
50A  
16A  
6A  
11.3V to 12.6V  
11.3V to 12.6V  
4.5V to 5.5V  
6A  
3A  
3A  
tech.support@psbel.com  
3
PFC375 Series  
NOTES:  
1
Output currents ratings are expressed with 300 LFM forced air.  
2
3
Maximum peak-to-peak noise expressed as a percentage of output voltage, 20 MHz bandwidth.  
Peak loads up to 450 Watts for 60 seconds or less are acceptable, (10% duty cycle max.).  
Peak power must not exceed 450 Watts.  
V4 can be adjusted to 16 V with a minimum load of 5 A on V1.  
For operation of V4 greater than 24 V, consult factory.  
V3 and V4 may be series connected to obtain 48 V.  
Models without suffix G use the lead solder exemption  
4
5
6
7
Ooo Model numbers highlighted in yellow are not recommended for new designs or EOL  
PARAMETER  
CONDITIONS / DESCRIPTION  
Continuous input range.  
AC Input.  
MIN  
85  
NOM  
MAX  
264  
63  
UNITS  
Input Voltage - AC  
Input Frequency  
VAC  
Hz  
47  
Lowest AC input voltage that regulation is maintained with full rated  
loads.  
Brown Out Protection  
85  
20  
VAC  
Hold-Up Time  
Input Current  
Over full AC input voltage range at full rated load.  
85 VAC at full rated load.  
ms  
6
ARMS  
Non-user serviceable internally located AC input line fuse, F10A,  
250V.  
110 VAC  
Internally limited by thermistor, one cycle, 25°C.  
220 VAC  
Input Protection  
35  
65  
Inrush Surge Current  
APK  
Power Factor  
Per EN61000-3-2.  
0.98  
W/VA  
kHz  
Operating Frequency  
Switching frequency of main transformer.  
100  
PARAMETER  
CONDITIONS / DESCRIPTION  
MIN  
NOM  
MAX  
UNITS  
Full rated load, 110 VAC. Varies with distribution of loads among  
outputs.  
Single output models.  
Multiple output models, 5V main output only.  
Multiple output models, 24V main output only.  
Efficiency  
68  
%
0
3.5  
1
Minimum Loads  
Ripple and Noise  
Output Power  
Amps  
Full load, 20MHz bandwidth.  
See Model Selection Charts  
300 LFM forced air cooling required for operation. See optional fan.  
Continuous power, multiple output models.  
Peak power, all models.  
375  
Watts  
450  
0
Overshoot / Undershoot  
Regulation  
Output voltage overshoot/undershoot at turn-on.  
V
Varies by output. Total regulation includes: line changes from 85-  
132 VAC or 170-264 VAC, changes in load starting at 20% load  
and changing to 100% load.  
See Model Selection Charts  
Recovery time, to within 1% of initial set point due to a 50-100%  
load change, 3% max. deviation. (Main output only on multi-output  
units).  
Transient Response  
1
ms  
Turn-On Delay  
Time required for initial output voltage stabilization.  
1
Sec  
ms  
Turn-On Rise Time  
Time required for output voltage to rise from 10% to 90%.  
10  
North America  
+1 408 785 5200  
Asia-Pacific  
+86 755 298 85888  
Europe, Middle East  
+353 61 225 977  
© 2019 Bel Power Solutions & Protection  
BCD.00594_AC  
4
PFC375 Series  
PARAMETER  
CONDITIONS / DESCRIPTION  
MIN  
NOM  
MAX  
UNITS  
Provided on single output units and the main output only of multiple  
output units.  
PFC375-30XXG, PFC375-40XXG, PFC375-45XXG  
PFC375-1012G  
6.0  
6.4  
13.5  
17.0  
27.0  
30.8  
60.0  
27.0  
15.5  
19.5  
30.7  
35.0  
70.0  
30.7  
Overvoltage Protection  
PFC375-1015G  
PFC375-1024G  
PFC375-1028G  
PFC375-1048G  
V
PFC375-42XXG  
Fully protected against output overload and short circuit. Automatic  
recovery upon removal of overload condition.  
Overload Protection  
Overtemperature  
Protection  
System shutdown due to excessive internal temperature, automatic reset.  
Total voltage compensation for cable losses with respect to the main  
output.  
Remote Sense  
Current Share  
250  
10  
mV  
%
Accuracy of shared current with up to 6 parallel units.  
TTL compatible logic signal will inhibit outputs by the application  
of a logic low signal. An open circuit or external TTL high signal  
allows normal operation.  
Inhibit  
Input Power  
Fail Warning  
TTL compatible logic signal. Time before regulation dropout due to  
5 loss of input power at 110 VAC.  
TTL compatible signal. Signal is low if main output is greater or less than  
10% of nominal.  
Provides 170 mA current to user-supplied fan, if fan option is not  
selected.  
5
ms  
V
Power Good  
Fan Voltage  
12  
PARAMETER  
CONDITIONS / DESCRIPTION  
MIN  
NOM  
MAX  
UNITS  
Approved to the latest edition of the following standards.  
UL/CSA60950-1, EN60950-1 and IEC60950-1  
Agency Approvals  
Approved  
Dielectric Withstand  
Voltage  
Input to Output per EN60950.  
2600  
VDC  
Electromagnetic  
Interference  
FCC CFR title 47 Part 15 Sub-Part B - Conducted.  
EN55022 / CISPR 22 Conducted.  
B
B
Class  
ESD Susceptibility  
Radiated Susceptibility  
EFT/Burst  
Per EN61000-4-2, level 4.  
Per EN61000-4-3, level 3.  
Per EN61000-4-4, level 4.  
8
10  
kV  
V/M  
kV  
± 4  
Line-to-Line  
Per EN61000-4-5 level 3.  
1
2
Input Transient Protection  
kV  
Line-to-Ground  
Insulation Resistance  
Leakage Current  
Input-to-Output.  
10  
MΩ  
Per EN60950, 264 VAC.  
2.0  
mA  
tech.support@psbel.com  
5
PFC375 Series  
PARAMETER  
CONDITIONS / DESCRIPTION  
MIN  
NOM  
MAX  
UNITS  
Operating.  
Non-Operating.  
10k  
40k  
Altitude  
ASL Ft.  
At 100% load:  
At 50% load:  
0
0
50  
70  
Operating Temperature  
Storage Temperature  
°C  
°C  
Derate linearly above 50°C by 2.5% per °C.  
-55  
85  
Forced air cooling of 300 LFM is required if the internal fan  
option is not specified. Cooling air velocity is measured 1/4"  
above, at the middle of the chassis. Airflow direction is from the  
input section to the output section.  
Forced Air Cooling  
Temperature Coefficient  
Relative Humidity  
0°C to 70°C (after 15 minute warmup).  
Non-Condensing.  
± 0.02  
± 0.05  
95  
%/°C  
%RH  
5
Operating: 10±3mS, 3 axis, Halfsine. 20 G  
Non-operating: 10±3mS, 3 axis, Halfsine.  
20  
40  
Shock  
G
Operating: 5-32 Hz  
32-2000 Hz Sinusoidal  
Non-operating:  
0.02  
1
6.15  
in (DA)  
GRMS  
GRMS  
Vibration  
PARAMETER  
CONDITIONS / DESCRIPTION  
MIN  
NOM  
MAX  
UNITS  
228.6 x 127.0 x 63.5  
9.00 x 5.00 x 2.50  
mm  
in  
mm  
in  
Overall Size  
Dimensions  
266.7  
10.50  
Overall Length With Fan  
1.95  
4.3  
kg  
lb  
Weight  
PARAMETER  
CONDITIONS / DESCRIPTION  
MIN  
NOM  
MAX  
UNITS  
Add “M” as a suffix to the model number to order chassis with  
M4 x 0.7 mounting inserts.  
228.6 x 127.0 x 63.5  
9.00 x 5.00 x 2.50  
mm  
in  
Metric Mounting  
Add “F” as a suffix to the model number to order integral fan.  
(Provides required 300 LFM of forced air cooling).  
266.7 x 127.0 x 63.5  
10.50 x 5.00 x 2.50  
mm  
in  
Fan  
6-32 Screw Terminal on 0.375" (9.5mm) Centers  
Bus Bar Main Output, E1 & E2, 10-32 Screw Terminal  
Chassis: 0.090" (2.3mm) Aluminum Alloy, With Clear Finish  
TERMINAL BLOCKS have 6-32 (PHILSLOT) screw connections on 0.375" (9.53mm) centers; open space clearance for connections is  
0.31" (7.87mm).  
North America  
Asia-Pacific  
Europe, Middle East  
+1 408 785 5200  
+86 755 298 85888  
+353 61 225 977  
© 2019 Bel Power Solutions & Protection  
BCD.00594_AC  
6
PFC375 Series  
Figure 1. Mechanical Drawing PFC375  
ECO/MCO  
REFERENCE NO.  
DATE  
2019-Jun-27  
REVISION  
DESCRIPTION OF CHANGE  
Page 4: Insulation Resistance updated from 10 M to 10 MΩ  
AC  
C94228  
NUCLEAR AND MEDICAL APPLICATIONS - Products are not designed or intended for use as critical components in life support systems,  
equipment used in hazardous environments, or nuclear control systems.  
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on  
the date manufactured. Specifications are subject to change without notice.  
tech.support@psbel.com  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明