VRP2-50E3A0 [BEL]
NON-ISOLATED DC/DC CONVERTERS; 非隔离式DC / DC转换器型号: | VRP2-50E3A0 |
厂家: | BEL FUSE INC. |
描述: | NON-ISOLATED DC/DC CONVERTERS |
文件: | 总15页 (文件大小:418K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
NON-ISOLATED DC/DC CONVERTERS
5 Vdc - 13.8 Vdc Input
0.6 Vdc - 5 Vdc/50 A Output
Nov. 02, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
xRP2-50E3A0 RoHS Compliant PRELIMINARY Rev.A
Features
•
•
•
•
•
•
•
Non-Isolated
•
•
•
•
•
•
Wide Input Voltage Range (5Vdc-13.8Vdc)
Output Voltage Trim (0.6Vdc-5Vdc)
Output Overvoltage Shut Down
OCP/SCP
High Efficiency
Fixed Switching Frequency
Power Good Signal
Low Output Ripple
Remote On/Off
Excellent Thermal Performance
Low Cost
Class 1, Category 2, Non-Isolated DC/DC Converter (refer to IPC-9592)
Applications
•
•
•
Networking
Computers and peripherals
Telecommunications
Description
The xRP2-50E3A0 is a non-isolated dc/dc converter that operates over a wide range of input voltage (VIN = 5
Vdc-13.8 Vdc). This unit can provide a precisely regulated output voltage from 0.6 Vdc to 5.0 Vdc and can deliver
up to 50 A of output current. This unit is designed to be highly efficient and low cost. The converter is provided in
an industry standard package.
Part Selection
Output
Voltage
Input
Voltage
Max. Output
Current
Max. Output
Power
Typical Efficiency
(Vo=1.8 Vdc)
Model Number
Active High
Model Number
Active High
0.6 V - 5 V
5 V - 13.8 V
50 A
250 W
88.8%
VRP2-50E3A0
0RP2-50E3A0
Notes: Add “G” suffix at the end of the model number to indicate Tray Packaging.
Part Number Explanation
V R P2 – 50 E 3A 0
1 2
3
4
5 6
7
1---Vertical mount, change “V” to “0” means through hole mount
2---RoHS 6, change “R” to “7” means RoHS 5
3---Series name, SIP
4---Series code, 50A output
5--- Wide input range (5-13.8V)
6---Wide output range (0.6-5V)
7---Enable, active high
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
1
NON-ISOLATED DC/DC CONVERTERS
5 Vdc - 13.8 Vdc Input
0.6 Vdc - 5 Vdc/50 A Output
Nov. 02, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
Absolute Maximum Ratings
Unit
V
Parameter
Min
-0.3
-0.3
Typ
Max
15
Notes
Continuous Input Voltage
Remote On/Off
-
-
15
V
Ambient Temperature
Storage Temperature
0
-
-
70
°C
°C
-55
125
Note: Ratings used beyond the maximum ratings may cause a reliability degradation of the converter or may
permanently damage the device.
Input Specifications
Parameter
Min
Typ
Max
Unit
Notes
Operating Input Voltage
Vo≤2.8 V
Vo >2.8 V
5
12
12
13.8
13.8
V
V
1.8*Vo
Input Current (full load)
Input Current (no load)
-
-
-
-
32.0
400
50
A
200
30
mA
mA
Remote Off Input Current
With simulated source impedance of
10 uH, 5 Hz to 20 MHz. Use a
1000 uF/16 V electrolytic capacitor
with ESR=0.1 ohm max, at 100 kHz at
25°C.
Input Reflected Ripple Current
(rms)
-
-
5
8
mA
Input Reflected Ripple Current
(pk-pk)
20
35
mA
I2t Inrush Current Transient
Turn-on Voltage Threshold
Turn-off Voltage Threshold
-
-
-
1
4.8
-
A2s
V
4.6
4.1
3.9
V
Note: All specifications are typical at 25 °C unless otherwise stated.
Output Specifications
Parameter
Min
Typ
Max
Unit
Notes
Output Voltage Set Point
Vo≥1 V
Vo<1 V
-1.5
-10
-
-
+1.5
+10
%Vo
mV
Vin=Vinmin, Io=Iomax
Load regulation
Vo≥2.5 V
Vo<2.5 V
-
-
-
-
0.6
12
%Vo
mV
Line Regulation
Vo≥2.5 V
Vo<2.5 V
-
-
-
-
0.3
9
%Vo
mV
Regulation Over Temperature
(-40 deg.C-85deg.C)
-
-
0.02
%Vo/C
Ripple and Noise (pk-pk)
Vo=5.0 V
-
-
-
-
-
-
55
50
50
50
40
25
110
100
100
90
80
60
mV
mV
mV
mV
mV
mV
Test conditions:
Vo=3.3 V
Vo=2.5 V
Vo=1.8 V
Vo=1.2 V
Vo=0.6 V
0-20MHz BW, with a 1µF ceramic
capacitor and a 10 uF Tantalum cap at
output.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
2
NON-ISOLATED DC/DC CONVERTERS
5 Vdc - 13.8 Vdc Input
0.6 Vdc - 5 Vdc/50 A Output
Nov. 02, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
Output Specifications (continued)
Parameter
Min
Typ
Max
Unit
Notes
Ripple and Noise (rms)
Vo=5.0 V
Vo=3.3 V
Vo=2.5 V
Vo=1.8 V
Vo=1.2 V
Vo=0.6 V
-
-
-
-
-
-
10
12
12
12
10
8
30
35
25
25
25
25
mV
mV
mV
mV
mV
mV
Test conditions:
0-20MHz BW, with a 1µF ceramic
capacitor and a 10 uF Tantalum cap at
output.
Ripple and Noise (pk-pk)
under worst case
over all operating input voltage, load
and ambient temperature condition
-
-
150
mV
Output Current Range
Output DC Current Limit
Rise Time
0
55
1
-
-
65
-
50
75
2
A
A
mS
4
7
mS Enable form Vin
mS Enable form ON/OFF
%
Turn on Time
-
4
7
Overshoot at Turn on
Output Capacitance
Transient Response
-
0
3
0
-
4700
uF
Overshoot
-
-
-
-
200
50
300
100
300
100
mV
△V50%~100%
of Max Load
Test conditions:
di/dt=2.5A/us, Vin=12Vdc, Vo=1.5Vdc,
Ta=25°C, with a 1µF ceramic
capacitor and a 10uF Tantalum cap at
output.
Settling Time
Overshoot
uS
mV
uS
200
50
△V100%~50%
of Max Load
Settling Time
Note: All specifications are typical at nominal input, full load at 25°C unless otherwise stated.
General Specifications (continued)
Parameter
Min
Typ
Max
Unit
Notes
Efficiency
Vo=5.0 V
Vo=1.8 V
Vo=0.6 V
92
86
72
94.2
88.8
74
-
-
-
%
%
%
Vin=12V, full load
Switching Frequency
-
-
-
330
125
25
-
130
-
kHz
%Vo
g
Over Voltage Protection
Weight
Dimensions
Through Hole Mount
0RP2-50E3A0
Inches (L × W × H)
-
-
1.45 x 1.1 x 0.783
36.83 x 27.94 x 19.89
Millimeters (L × W × H)
Dimensions
Vertical Mount
VRP2-50E3A0
Inches (L × W × H)
1.45 x 1.1 x 0.743
36.83 x 27.94 x 18.87
Millimeters (L × W × H)
Note: All specifications are typical at 25 °C unless otherwise stated.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
3
NON-ISOLATED DC/DC CONVERTERS
5 Vdc - 13.8 Vdc Input
0.6 Vdc - 5 Vdc/50 A Output
Nov. 02, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
Efficiency Data
Efficiency Curve Vo=0.6 V
Efficiency Curve Vo=1.2 V
95.0%
90.0%
85.0%
80.0%
75.0%
70.0%
65.0%
60.0%
85.0%
80.0%
75.0%
70.0%
65.0%
60.0%
55.0%
50.0%
5 V
5 V
12 V
13.8 V
12 V
13.8 V
5
12.5
25
37.5
50
5
12.5
25
37.5
50
Output Current (A)
Output Current (A)
Efficiency Curve Vo=1.8 V
Efficiency Curve Vo=2.5 V
95.0%
90.0%
85.0%
80.0%
75.0%
70.0%
65.0%
60.0%
100.0%
95.0%
90.0%
85.0%
80.0%
75.0%
70.0%
65.0%
5 V
5 V
12 V
13.8 V
12 V
13.8 V
5
12.5
25
37.5
50
5
12.5
25
37.5
50
Output Current (A)
Output Current(A)
Efficiency Curve Vo=3.3 V
Efficiency Curve Vo=5.0 V
100.0%
95.0%
90.0%
85.0%
80.0%
75.0%
70.0%
65.0%
100.0%
95.0%
90.0%
85.0%
80.0%
75.0%
70.0%
65.0%
9 V
6 V
12 V
13.8 V
12 V
13.8 V
5
12.5
25
37.5
50
5
12.5
25
37.5
50
Output Current(A)
Output Current(A)
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
4
NON-ISOLATED DC/DC CONVERTERS
5 Vdc - 13.8 Vdc Input
0.6 Vdc - 5 Vdc/50 A Output
Nov. 02, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
Ripple and Noise Waveforms
12 Vdc input, 0.6 Vdc/50 A output
12 Vdc input, 1.8 Vdc/50 A output
12 Vdc input, 1.2 Vdc/50 A output
12 Vdc input, 2.5 Vdc/50 A output
12 Vdc input, 3.3 Vdc/50 A output
12 Vdc input, 5.0 Vdc/50 A output
Note: Ripple and noise at full load, 12 Vdc input and Ta=25 deg C.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
5
NON-ISOLATED DC/DC CONVERTERS
5 Vdc - 13.8 Vdc Input
0.6 Vdc - 5 Vdc/50 A Output
Nov. 02, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
Transient Response Waveforms
Vout= 0.6 V 0%-50% Load Transient
Vout=0.6 V 50%-0% Load Transient
Vout=1.2 V 50%-0% Load Transient
Vout=1.8 V 50%-0% Load Transient
Vout=1.2 V 0%-50% Load Transient
Vout=1.8 V 0%-50% Load Transient
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
6
NON-ISOLATED DC/DC CONVERTERS
5 Vdc - 13.8 Vdc Input
0.6 Vdc - 5 Vdc/50 A Output
Nov. 02, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
Transient Response Waveforms (continued)
Vout= 2.5 V 0%-50% Load Transient
Vout=2.5 V 50%-0% Load Transient
Vout=3.3 V 50%-0% Load Transient
Vout=5 V 50%-0% Load Transient
Vout=3.3 V 0%-50% Load Transient
Vout=5 V 0%-50% Load Transient
Note: Transient response at Vin=12 V, di/dt =2.5 A/uS, 1uF ceramic cap and 10uF aluminum cap at output, and
Ta=25 deg C.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
7
NON-ISOLATED DC/DC CONVERTERS
5 Vdc - 13.8 Vdc Input
0.6 Vdc - 5 Vdc/50 A Output
Nov. 02, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
Startup & Shutdown
Rise Time
Test Condition: 12Vdc input, 5Vdc/50A output, Ta=25 deg C
Startup time
Startup from Vin
Startup from on/off
Ch1: Vo
Ch1: Vo
Ch2: Vin
Ch2: on/off
Test Condition:
Test Condition:
12Vdc input, 5Vdc/50A output, Ta=25 deg C
12Vdc input, 5Vdc/50A output, Ta=25 deg C
Shutdown
Test Condition: 12Vdc input, 5Vdc/0A output, Ta=25 deg C
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
8
NON-ISOLATED DC/DC CONVERTERS
5 Vdc - 13.8 Vdc Input
0.6 Vdc - 5 Vdc/50 A Output
Nov. 02, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
Control Specifications
Parameter
Min
Typ
Max
Unit
Notes
Remote On/Off (Active High)
Signal Low (Unit Off)
Signal High (Unit On)
Current Source/Sink
-0.3
2
-
-
-
0.8
Vin,max
3.3
V
V
Remote On/Off pin is open, unit is off.
0
mA
Recommended remote on/off circuit for active high
Vin+
Vin+
Vcc
Vcc
On/off
Vin-
O n/off
V in-
Control with open collector/drain circuit
Control with photocoupler circuit
Vin+
Vin+
On/off
Vin-
Vcc
On/off
Vin-
Control with logic circuit
Output Trim Equations
Permanently on
Equations for calculating the trim resistor are shown below. The Trim Up resistor should be connected between
the Trim+ pin and Trim- pin.
Maximum duty cycle is 65%.
Minimum trim down voltage is 0.6V
Maximum trim up voltage is 5V.
The total voltage increased by trim and remote sense should not exceed 10% of the nominal output voltage.
The resistor trim equation:
Vout
1.2
Rtrim
=
(K Ω)
Module
Trim+
Trim–
Vo − 0.6
Rtrim
The voltage trim equation:
Trim+
Rtrim2
R 1.2−2V
(
)
trim1
trim
+
Vtrim
Rtrim1
-
R =
(KΩ)
trim2
R Vo−0.6 −1.2
(
)
trim1
Trim-
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
9
NON-ISOLATED DC/DC CONVERTERS
5 Vdc - 13.8 Vdc Input
0.6 Vdc - 5 Vdc/50 A Output
Nov. 02, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
Remote Sense
This module has remote sense compensation feature. It can minimize the effects of resistance between
module’s output and load in system layout and facilitates accurate voltage regulation at load terminals or
other selected point.
1. The remote sense lines carries very little current and hence do not require a large cross-sectional area.
2. This module compensates for a maximum drop of 10% of the nominal output voltage.
3. If the unit is already trimmed up, the available remote sense compensation range should be
correspondingly reduced. The total voltage increased by trim and remote sense should not exceed 10%
of the nominal output voltage.
4. When using remote sense compensation, all the resistance, parasitic inductance and capacitance of the
system are incorporated within the feedback loop of this module. It can make an effect on the module's
compensation, affecting the stability and dynamic response. A 0.1uF ceramic capacitor can be
connected at the point of load to de-couple noise on the sense wires.
5. Recommend the connection of remote sense compensation as below figure. There are a resistor RS+
(100 ohm) from Vo+ to Sense+ and a resistor RS- (51 ohm)) from Vo- to Sense- inside of this module.
Vo+
Sense+
Load
Sense-
Vo-
6. If not using remote sense compensation, please connect sense directly to output at module's pin, that is,
connect sense+ to Vo+ and sense- to Vo- at module's pin, the shorter the better. see below figure.
Vo+
Sense+
Load
Sense-
Vo-
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
10
NON-ISOLATED DC/DC CONVERTERS
5 Vdc - 13.8 Vdc Input
0.6 Vdc - 5 Vdc/50 A Output
Nov. 02, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
Over Current Protection
To provide protection in a fault output overload condition, the module is equipped with internal current-limiting
circuitry and can endure current limiting for a few mili-seconds. If the over current condition persists beyond a few
milliseconds, the module will shut down into hiccup mode and restart once every 12mS. The module operates
normally when the output current goes into specified range. The typical average output current is 3A during
hiccup.
Vout= 5.0V, Vin=12V@Ta=25℃
Vout= 0.6V, Vin=12V@Ta=25℃
Expansion of on time portion of above figure
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
11
NON-ISOLATED DC/DC CONVERTERS
5 Vdc - 13.8 Vdc Input
0.6 Vdc - 5 Vdc/50 A Output
Nov. 02, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
Input Under-voltage Lockout
Under-voltage Lockout
Voltage Falling
Voltage Rising
V1=4.1V
V2=4.6V
Input Voltage (V)
V1
V2
Power Good
1. This module has a power good indicator output. Power good pin used positive logic and is open collector.
2. Power good pin can sink 10mA.
3. The maximum voltage pulled up externally on Power Good pin should not exceed 5.3V.
4. When the output reaches 90% of the nominal set-point, the power good pin will be pulled high.
Typical Start-up Using Remote ON/OFF
Vin=12.0V, Vout=5V, Io=50A
CH1: Output Voltage
Typical Start-up Using Remote ON/OFF
Vin=12.0V, Vout=0.6V, Io=50A
CH1: Output Voltage
CH3: PG
CH3: PG
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
12
NON-ISOLATED DC/DC CONVERTERS
5 Vdc - 13.8 Vdc Input
0.6 Vdc - 5 Vdc/50 A Output
Nov. 02, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
Mechanical Outline
0RP2-50E3A0
Pin Connections
Pin
Function
Pin
Function
1
2
3
4
5
6
7
8
Vout
Vout
Vout
9
PwGOOD
Sense-
Sense+
Vin
10
11
12
13
14
15
GND
GND
Vin
Enable
Trim-
GND
GND
Trim+
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
13
NON-ISOLATED DC/DC CONVERTERS
5 Vdc - 13.8 Vdc Input
0.6 Vdc - 5 Vdc/50 A Output
Nov. 02, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
Mechanical Outline (continued)
VRP2-50E3A0
Pin Connections
Pin
Function
1
Vout
Vout
2
Vout
3
4
GND
GND
5
6
Enable
Trim-
7
8
Trim+
PwGOOD
Sense-
Sense+
Vin
9
10
11
12
13
14
15
Vin
GND
GND
Note: This module is recommended and compatible with Pb-Free Wave Soldering and must be soldered
using a peak solder temperature of no more than 260ºC for less than 5 seconds.
Note:
1) All Pins: Material - Copper Alloy;
Finish – 3 micro inches minimum Gold over 50 micro inches minimum Nickel plate.
2) Undimensioned components are shown for visual reference only.
3) All dimensions in inches (mm); Tolerances: x.xx +/-0.02 in. (x.x +/-0.5mm) x.xxx +/-0.010 in. (x.xx +/-0.25mm).
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
14
NON-ISOLATED DC/DC CONVERTERS
5 Vdc - 13.8 Vdc Input
0.6 Vdc - 5 Vdc/50 A Output
Nov. 02, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
Revision History
Date
Version
PA
Changes Detail
Approval
2010-11-02
First release
XF JIANG
RoHS Compliance
Complies with the European Directive 2002/95/EC, calling for the elimination of lead and
other hazardous substances from electronic products.
©2010 Bel Fuse Inc. Specifications subject to change without notice. 110210
15
CORPORATE
FAR EAST
EUROPE
Bel Fuse Inc.
Bel Fuse Ltd.
Bel Fuse Europe Ltd.
206 Van Vorst Street
Jersey City, NJ 07302
Tel 201-432-0463
Fax 201-432-9542
www.belfuse.com
8F/ 8 Luk Hop Street
San Po Kong
Kowloon, Hong Kong
Tel 852-2328-5515
Fax 852-2352-3706
www.belfuse.com
Preston Technology Management Centre
Marsh Lane, Suite G7, Preston
Lancashire, PR1 8UD, U.K.
Tel 44-1772-556601
Fax 44-1772-888366
www.belfuse.com
相关型号:
VRP4-80A1A0G
DC-DC Regulated Power Supply Module, 1 Output, 400W, Hybrid, ROHS COMPLIANT PACKAGE-24
BEL
VRP4-80A1ABG
DC-DC Regulated Power Supply Module, 1 Output, 400W, Hybrid, ROHS COMPLIANT PACKAGE-24/23
BEL
©2020 ICPDF网 联系我们和版权申明