首页 |元器件品牌

HSMA-A431-13NM1 [BOARDCOM]

Surface Mount LED Indicator;
HSMA-A431-13NM1
型号： HSMA-A431-13NM1
厂家： Broadcom Corporation.    Broadcom Corporation.
描述：

Surface Mount LED Indicator
文件： 总13页 (文件大小：889K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
Data Sheet  
HSMx-A43x-xxxxx  
Surface Mount LED Indicator  
Description  
Features  
Industry-standard PLCC-4  
High reliability LED package  
The Broadcom® Power PLCC-4 SMT LEDs with Lens are high-  
performance PLCC-4 package size SMT LEDs targeted mainly  
inAutomotive and Electronic Signs and Signals (ESS) markets.  
These top-mount single-chip packages with focused radiation  
offer high brightness in beam direction and are excellent for  
interior automotive, indoor and outdoor sign and industrial  
applications. With additional lens in 30° variants, these  
products are especially fitting to applications for traffic lights,  
CHMSL, and displays.  
High brightness using AllnGaP and InGaN dice technologies  
High optical efficiency  
Narrow viewing angle at 30°  
Available in 8-mm carrier tape on 7-inch reel  
Compatible with both IR and TTW soldering process  
Applications  
The PLCC-4 package family is able to dissipate heat better  
compared to the PLCC-2 packages. In proportion to this  
increase in driving current, this family of LEDs is able to  
produce higher light output compared to the conventional  
PLCC-2 SMT LEDs.  
Interior automotive:  
Instrument panel backlighting  
Central console backlighting  
Cabin backlighting  
Navigation and audio system  
Dome lighting  
As an extension of the standard flat top PLCC-4 SMT LEDs, the  
Power PLCC-4 with Lens device is able to provide focused  
beams within narrow viewing angles (30°) meeting the market’s  
requirements for focused radiation and high brightness in beam  
directions.  
Push button backlighting  
Exterior automotive:  
Turn signals  
CHMSL  
Rear combination lamp  
Side repeaters  
The Power PLCC-4 SMT LED with 30° is ideal for panel, push  
button, or general backlighting in automotive interior and  
exterior, sign, office equipment, industrial equipment, and  
home appliances applications. This package design, coupled  
with careful selection of component materials, allows the  
Power PLCC-4 SMT LED with Lens to perform with higher  
reliability in a larger temperature range –40 °C to 100 °C. This  
high reliability feature is crucial to allow the Power PLCC-4  
SMT LED with Lens to perform well in harsh environments,  
such as its target Automotive and ESS markets. The Power  
PLCC-4 SMT LED with Lens package is also designed to be  
compatible with both IR-solder re-flow and through-the-wave  
soldering.  
Electronic signs and signals:  
Interior and exterior full color sign  
Variable message sign  
Garden lighting  
Office automation, home appliances, industrial  
equipment:  
Front panel backlighting  
Push button backlighting  
Display backlighting  
CAUTION!  
This LED is ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to application note AN-  
1142 for additional details.  
Broadcom  
AV02-0208EN  
October 26, 2017  
HSMx-A43x-xxxxx Data Sheet  
Surface Mount LED Indicator  
The Broadcom Power PLCC-4 SMT LED with 30° Lens carries the part number HSMx- A43x-xxxxx. The high brightness  
AlInGaP and InGaN dice technologies used provide the product brightness that meets the Automotive and ESS market  
requirements. The lens package will complement and complete the existing AlInGap and InGaN color standard Power-  
PLCC-4 LED that Broadcom offers, providing customers an extra lens option from one supplier.  
To facilitate easy pick and place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel is shipped in  
single intensity and color bin (except for red color), to provide close uniformity.  
Figure 1: Package Dimensions Source A  
2.8 ± ±0.2  
3.87 max.  
2.2 ± ±0.2  
0.1 TYP.  
0.80 ± ±0.1  
+ve  
-ve  
3.2 ± ±0.2  
3.5 ± ±0.2  
0.8 ± ±0.3  
-ve  
-ve  
0.5 ± ±0.1  
0.7 ± ±0.1  
Package marking  
Figure 2: Package Dimensions Source B  
2.8 r 0.2  
2.2 r 0.2  
3.87 max.  
0.1  
0.80  
r
0.1 TYP.  
+ve  
-ve  
3.2r0.2  
3.5r0.2  
0.8r0.3  
-ve  
-ve  
0.5r0.1  
Package marking  
0.7r0.1  
NOTE:  
1. All dimensions are in mm.  
2. Electrical connection between all cathodes is recommended.  
Broadcom  
AV02-0208EN  
2
HSMx-A43x-xxxxx Data Sheet  
Surface Mount LED Indicator  
Device Selection Guide  
Test Current  
Dice  
Technology  
Min. IV (mcd)  
Typ. IV (mcd)  
Max. IV (mcd)  
Color  
Part Number  
(mA)  
Red  
HSMC-A430-W50M1  
HSMC-A431-X90M1  
HSMC-A431-Y70M1  
HSMC-A431-Y80M1  
HSMJ-A430-W50M1  
HSMJ-A431-X90M1  
HSMJ-A431-X90M1  
HSMJ-A431-Y70M1  
HSML-A431-X90M1  
HSMA-A430-W90M1  
HSMA-A431-Y00M1  
HSMA-A431-X90M1  
HSMA-A431-13NM1  
HSMA-A431-Z50M1  
HSMA-A431-Z5WM1  
HSMM-A430-X90M2  
HSMM-A430-Y3YM2  
HSMM-A430-Y7YM2  
HSMN-A430-V50M2  
HSMN-A430-V7YM2  
1125  
2240  
3550  
3550  
1125  
2240  
2240  
3550  
2240  
1400  
2850  
2240  
7150  
4500  
4500  
2240  
2850  
3550  
715  
2300  
4000  
—
3550  
7150  
7150  
9000  
3550  
7150  
7150  
7150  
7150  
4500  
—
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
30  
30  
30  
30  
30  
AlInGaP  
AlInGaP  
AlInGaP  
AlInGaP  
AlInGaP  
AlInGaP  
AlInGaP  
AlInGaP  
AlInGaP  
AlInGaP  
AlInGaP  
AlInGaP  
AlInGaP  
AlInGaP  
AlInGaP  
InGaN  
—
Red Orange  
2300  
4500  
—
—
Orange  
Amber  
4500  
3000  
5000  
4700  
—
7150  
14000  
14000  
14000  
7150  
5600  
7150  
2240  
1800  
—
—
Green  
Blue  
—
—
InGaN  
—
InGaN  
—
InGaN  
900  
—
InGaN  
NOTE:  
1. The luminous intensity, I , is measured at the mechanical axis of the lamp package. The actual peak of the  
V
spatial radiation pattern might not be aligned with this axis.  
2. I tolerance is ±12%.  
V
Broadcom  
AV02-0208EN  
3
HSMx-A43x-xxxxx Data Sheet  
Surface Mount LED Indicator  
Part Numbering System  
H
S
M
x1  
-
A
x2  
x3  
x4  
-
x5  
x6  
x7  
x8  
x9  
Code  
Description  
LED Chip Color  
Option  
x1  
C
J
Red  
Red Orange  
Orange  
Amber  
L
A
M
N
4
Green  
Blue  
x2  
Package Type  
PLCC-4  
x3 x4  
x5  
Device Specific Configuration  
Minimum Intensity Bin Limits  
Intensity Bin Select  
Refer Intensity Bin Limit  
x6  
0
2
Full Distribution  
2 half bins starting from X51  
3 half bins starting from X51  
4 half bins starting from X51  
5 half bins starting from X51  
2 half bins starting from X52  
3 half bins starting from X52  
4 half bins starting from X52  
5 half bins starting from X52  
3
4
5
6
7
8
9
x7  
Color Bin Select  
0
Full Distribution  
A and B only  
Z
Y
B and C only  
W
V
C and D only  
D and E only  
U
T
E and F only  
F and G only  
S
G and H only  
Q
P
A, B and C only  
B, C and D only  
C, D and E only  
D, E and F only  
E, F and G only  
F, G and H only  
A, B, C and D only  
E, F G and H only  
N
M
L
K
1
2
x8 x9  
Packaging Option  
M1  
M2  
50-mA test current, top mount, 13 inch reel size  
30-mA test current, top mount, 13 inch reel size  
Broadcom  
AV02-0208EN  
4
HSMx-A43x-xxxxx Data Sheet  
Surface Mount LED Indicator  
Intensity Bin Limits  
Amber  
Min. (nm)  
Max. (nm)  
A
B
C
D
E
F
582.0  
584.5  
587.0  
589.5  
592.0  
594.5  
584.5  
587.0  
589.5  
592.0  
594.5  
597.0  
Min. IV (mcd)  
Max. IV (mcd)  
Bin ID  
U1  
U2  
V1  
V2  
W1  
W2  
X1  
X2  
Y1  
Y2  
Z1  
Z2  
11  
450.00  
560.00  
560.00  
715.00  
715.00  
900.00  
900.00  
1125.00  
1400.00  
1800.00  
2240.00  
2850.00  
3550.00  
4500.00  
5600.00  
7150.00  
9000.00  
11250.00  
14000.00  
18000.00  
1125.00  
1400.00  
1800.00  
2240.00  
2850.00  
3550.00  
4500.00  
5600.00  
7150.00  
9000.00  
11250.00  
14000.00  
Orange  
Min. (nm)  
Max. (nm)  
A
B
C
D
E
597.0  
600.0  
603.0  
606.0  
609.0  
600.0  
603.0  
606.0  
609.0  
612.0  
Red/  
Orange  
12  
Min. (nm)  
Max. (nm)  
21  
A
B
611.0  
616.0  
616.0  
620.0  
22  
Tolerance of each bin limit = ±12%.  
Red  
Min. (nm)  
Max. (nm)  
Full Distribution  
Color Bin Limits  
Blue  
Min. (nm)  
Max. (nm)  
Forward Voltage Bin Table  
A
B
C
D
460.0  
465.0  
470.0  
475.0  
465.0  
470.0  
475.0  
480.0  
For HSMV-A43x-xxxxx only.  
Bin  
Min. (V)  
Max. (V)  
VA  
VB  
VC  
VD  
VE  
1.9  
2.2  
2.5  
2.8  
3.1  
2.2  
2.5  
2.8  
3.1  
3.4  
Cyan  
Min. (nm)  
Max. (nm)  
A
B
C
D
490.0  
495.0  
500.0  
505.0  
495.0  
500.0  
505.0  
510.0  
Tolerance for each bin limit = ±0.1V.  
Green  
Min. (nm)  
Max. (nm)  
A
B
C
D
515.0  
520.0  
525.0  
530.0  
520.0  
525.0  
530.0  
535.0  
Broadcom  
AV02-0208EN  
5
HSMx-A43x-xxxxx Data Sheet  
Surface Mount LED Indicator  
Absolute Maximum Ratings (T = 25°C)  
A
Parameters  
HSMC/A  
70  
HSMV  
70  
HSMK/M/N  
Unit  
mA  
mA  
DC Forward Currenta  
30  
90  
Peak Forward Currentb  
200  
200  
Power Dissipation  
180  
5
240  
5
114  
4
mW  
V
Reverse Voltage  
Junction Temperature  
110  
°C  
°C  
°C  
Operating Temperature  
–40 to +100  
–40 to +100  
Storage Temperature  
a. Derate linearly as shown in Figure 7 and Figure 8.  
b. Duty factor = 10%, frequency = 1 kHz.  
Optical Characteristics (T = 25°C)  
A
Dominant  
Wavelength,  
λDa (nm)  
Luminous  
Peak  
Wavelength,  
c
Viewing Angle,  
Efficacy, ηV  
λPEAK (nm)  
2θ b(Degrees)  
(lm/W)  
½
Color  
Part Number  
Dice Technology  
Typical  
Typical  
Typical  
Typical  
Red  
HSMC-A43x  
HSMJ-A43x  
HSMV-A430  
HSML-A431  
HSMA-A43x  
HSMM-A430  
HSMN-A43X  
HSMK-A43X  
AlInGaP  
AlInGaP  
AlInGaP  
AlInGaP  
AlInGaP  
InGaN  
635  
621  
623  
609  
592  
518  
468  
500  
626  
615  
617  
605  
590  
525  
470  
502  
30  
30  
30  
30  
30  
30  
30  
30  
150  
240  
263  
320  
480  
500  
75  
Red Orange  
Orange  
Amber  
Green  
Blue  
InGaN  
Cyan  
InGaN  
285  
a. The dominant wavelength, λD, is derived from the CIE Chromaticity Diagram and represents the color of the device.  
b. θ is the off-axis angle where the luminous intensity is ½ the peak intensity.  
½
c. Radiant intensity, Ie in watts/steradian, may be calculated from the equation Ie = IV/ηV, where IV is the luminous intensity in candelas and ηV  
is the luminous efficacy in lumens/watt.  
Electrical Characteristics (T = 25°C)  
A
Forward Voltage, VF (Volts) at IF = 50 mA  
Part  
Reverse Voltage, VR at 100 µA Reverse Voltage, VR at 10 µA  
Number  
Min.  
Typ.  
Max.  
Min.  
Min.  
HSMC/J/L/A  
HSMV  
1.7  
1.7  
2.2  
2.8  
2.5  
3.4  
5
5
—
—
Forward Voltage VF (Volts) at IF = 30 mA  
Reverse Voltage VR at 100 µA Reverse Voltage VR at 10 µA  
Part  
Number  
Minimum  
Typical  
Maximum  
Minimum  
Minimum  
HSMK/M/N  
2.7  
3.9  
4.6  
—
5
Broadcom  
AV02-0208EN  
6
HSMx-A43x-xxxxx Data Sheet  
Surface Mount LED Indicator  
Figure 3: Relative Intensity vs. Wavelength  
1
InGaN  
Cyan  
0.8  
AlInGaP Amber  
InGaN  
Green  
0.6  
InGaN  
AlInGaP Orange  
AlInGaP Red Orange  
AlInGaP Red  
Blue  
0.4  
0.2  
0
380  
430  
480  
530  
580  
630  
680  
730  
780  
WAVELENGTH - nm  
Figure 4: Forward Current vs. Forward Voltage  
80  
70  
HSMV  
HSMC/J/L/A  
60  
50  
40  
30  
20  
10  
0
HSMK/M/N  
4
0
1
2
3
5
FORWARD VOLTAGE - V  
Figure 5: Relative Intensity vs. Forward Current (AlInGaP)  
Figure 6: Relative Intensity vs. Forward Current (InGaN)  
1.2  
1.0  
1.4  
1.2  
1.0  
0.8  
0.6  
0.4  
0.2  
0
0.8  
0.6  
0.4  
0.2  
0
0
5
10  
15  
20  
25  
30  
35  
0
5
10 15 20 25 30 35 40 45 50 55 60 65 70 75  
DC FORWARD CURRENT - mA  
DC FORWARD CURRENT - mA  
Broadcom  
AV02-0208EN  
7
HSMx-A43x-xxxxx Data Sheet  
Surface Mount LED Indicator  
Figure 7: Maximum Forward Current vs. Ambient  
Figure 8: Maximum Forward Current vs. Ambient  
Temperature. Derated Based on TJmax = 110 °C (AlInGaP)  
Temperature. Derated Based on TJmax = 110 °C (InGaN)  
80  
70  
60  
35  
30  
300C/W  
25  
300C/W  
350C/W  
50  
350C/W  
20  
40  
470C/W  
15  
470C/W  
30  
10  
5
20  
10  
0
0
0
20  
40  
60  
80  
100  
120  
0
20  
40  
60  
80  
100  
120  
AMBIENT TEMPERATURE – C  
AMBIENT TEMPERATURE – C  
Figure 9: Radiation Pattern  
1
0.9  
0.8  
0.7  
0.6  
0.5  
0.4  
0.3  
0.2  
0.1  
0
-90  
-60  
-30  
0
30  
60  
90  
ANGULAR DISPLACEMENT - DEGREES  
Broadcom  
AV02-0208EN  
8
HSMx-A43x-xxxxx Data Sheet  
Surface Mount LED Indicator  
Figure 10: Recommended Soldering Pad Pattern (IR Reflow)  
X
X
2.60  
(0.103)  
0.40 (0.016)  
1.10  
(0.043)  
Y
Y
0.50  
(0.020)  
4.50 (0.178)  
1.50 (0.059)  
REPRESENTS ELECTRICAL  
CONNECTIVITY BETWEEN PADS  
DIMENSIONS IN mm (INCHES).  
SOLDER RESIST  
Figure 11: Recommended Soldering Pad Pattern (TTW)  
X
X
0.5 (0.020)  
6.1 (0.240)  
2.8 (0.110)  
Y
2.0 (0.079)  
6.0 (0.236)  
1.0 (0.039)  
Y
2.0 (0.079)  
3.0 (0.118)  
DIMENSIONS IN mm (INCHES).  
REPRESENTS ELECTRICAL  
CONNECTIVITY BETWEEN PADS  
SOLDER RESIST  
Broadcom  
AV02-0208EN  
9
HSMx-A43x-xxxxx Data Sheet  
Surface Mount LED Indicator  
Figure 12: Soft Tip Vacuum Pick-Up Tool for Extracting SMD  
LED Components from Carrier Tape  
Figure 13: Recommended Pb-Free Reflow Soldering Profile  
Vacuum Pick-up Tool  
10 to 20 SEC.  
255 °C +5°C  
-0°C  
217°C  
-6°C/SEC MAX.  
3°C/SEC MAX.  
125°C +/- 25°C  
Nozzle Inner Diameter  
size: 1.0 to 1.5 mm  
Soft Tip  
60-150 SEC.  
MAX. 120 SEC.  
1.25mm  
Radius Contour  
TIME  
Figure 14: Recommended Wave Soldering Profile  
LAMINAR WAVE  
HOT AIR KNIFE  
TURBULENT WAVE  
BOTTOM SIDE  
OF PC BOARD  
250  
200  
150  
100  
TOP SIDE OF  
PC BOARD  
CONVEYOR SPEED = 1.83 M/MIN (6 FT/MIN)  
PREHEAT SETTING = 150 C (100 C PCB)  
SOLDER WAVE TEMPERATURE = 245 C  
AIR KNIFE AIR TEMPERATURE = 390 C  
AIR KNIFE DISTANCE = 1.91 mm (0.25 IN.)  
AIR KNIFE ANGLE = 40  
FLUXING  
SOLDER: SN63; FLUX: RMA  
NOTE: ALLOW FOR BOARDS TO BE SUFFICIENTLY  
COOLED BEFORE EXERTING MECHANICAL FORCE.  
50  
30  
PREHEAT  
20 30  
0
10  
40  
50  
60  
70  
80  
90  
100  
TIME – SECONDS  
Broadcom  
AV02-0208EN  
10  
HSMx-A43x-xxxxx Data Sheet  
Surface Mount LED Indicator  
Figure 15: Tape Leader and Trailer Dimensions  
TRAILER  
COMPONENT  
LEADER  
200 mm MIN. FOR O 180 REEL.  
200 mm MIN. FOR O 330 REEL.  
480 mm MIN. FOR O180 REEL.  
960 mm MIN. FOR O 330 REEL.  
C
A
USER FEED DIRECTION  
Figure 16: Tape Dimensions  
8.00 0.10  
2.00 0.05  
4.00 0.10  
O 1.50 0.10  
1.75 0.10  
5.50 0.05  
12.00 + 0.30  
- 0.10  
.388 0.02  
32° MAX  
8° MAX  
32° MAX  
8° MAX  
1.24  
3.52 0.10  
3.00 0.10  
3.70 0.10  
Broadcom  
AV02-0208EN  
11  
HSMx-A43x-xxxxx Data Sheet  
Surface Mount LED Indicator  
Figure 17: Reeling Orientation  
Control of assembled boards:  
If the PCB soldered with the LEDs is to be subjected to  
other high-temperature processes, store the PCB in a  
sealed MBB with desiccant or desiccator at <5% RH to  
ensure that all LEDs have not exceeded their floor life of  
672 hours.  
USER FEED DIRECTION  
Baking is required if:  
– The HIC indicator indicates a change in color for  
10% and 5%, as stated on the HIC.  
CATHODE SIDE  
– The LEDs are exposed to conditions of >30°C/60%  
RH at any time.  
– The LED's floor life exceeded 672 hours.  
The recommended baking condition is 60°C ± 5ºC for  
20 hours.  
PRINTED LABEL  
Baking can only be done once.  
Handling of Moisture-Sensitive  
Devices  
This product is qualified as Moisture Sensitive Level 2a per  
JEDEC J-STD-020. The following precautions for handling  
this moisture-sensitive product will help to ensure the  
reliability of the product. Refer to Broadcom Application  
Note AN5305, Handling of Moisture Sensitive Surface  
Mount Devices, for details.  
Before use:  
– An unopened moisture barrier bag (MBB) can be  
stored at <40°C/90% RH for 12 months. If the actual  
shelf life has exceeded 12 months and the humidity  
indicator card (HIC) indicates that baking is not  
required, it is safe to reflow the LEDs per the original  
MSL rating.  
– Do not open the MBB prior to assembly (for  
example, for IQC).  
Control after opening the MBB:  
– Read the HIC immediately upon opening of MBB.  
– Keep the LEDs at <30°C/60% RH at all times, and  
complete all high temperature-related processes,  
i
ncluding soldering, curing, or rework within 672 hours.  
Control for unfinished reel:  
Store unused LEDs in a sealed MBB with desiccant or a  
desiccator at <5% RH.  
Broadcom  
AV02-0208EN  
12  
Broadcom, the pulse logo, Connecting everything, Avago Technologies, Avago, and the A logo are among the trademarks  
of Broadcom and/or its affiliates in the United States, certain other countries and/or the EU.  
Copyright © 2017 by Broadcom. All Rights Reserved.  
The term “Broadcom” refers to Broadcom Limited and/or its subsidiaries. For more information, please visit  
www.broadcom.com.  
Broadcom reserves the right to make changes without further notice to any products or data herein to improve reliability,  
function, or design. Information furnished by Broadcom is believed to be accurate and reliable. However, Broadcom does  
not assume any liability arising out of the application or use of this information, nor the application or use of any product or  
circuit described herein, neither does it convey any license under its patent rights nor the rights of others.  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明