53CAA-E28-B13L [BOURNS]
Potentiometer, Conductive Plastic, 0.5W, 5000ohm, 20% +/-Tol, -1000,1000ppm/Cel, 1 Turn(s), 4565, 12.5 MM, SQUARE, 3 PINS, ROHS COMPLIANT;型号: | 53CAA-E28-B13L |
厂家: | BOURNS ELECTRONIC SOLUTIONS |
描述: | Potentiometer, Conductive Plastic, 0.5W, 5000ohm, 20% +/-Tol, -1000,1000ppm/Cel, 1 Turn(s), 4565, 12.5 MM, SQUARE, 3 PINS, ROHS COMPLIANT 电阻器 |
文件: | 总3页 (文件大小:373K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Features
■ RoHS compliant*
■ Conductive plastic or cermet
■ Linear and audio tapers
■ PC board and bushing mount
■ Gangable
■ Metal bushing and shaft
■ Sealed for board washing
51/53 - Sealed 1/2 ” (12.5 mm) Square Control
1
Electrical Characteristics
Conductive Plastic
Cermet
Standard Resistance Range
Linear ...................................................................................................1 K ohms to 1 megohm......................... 150 ohms to 1 megohm
Audio....................................................................................................1 K ohms to 1 megohm......................... 1 K ohms to 1 megohm
Total Resistance Tolerance
Linear Tapers........................................................................................±10 ꢀ or ±ꢁ0 ꢀ.................................... ±10 ꢀ or ±5 ꢀ
Audio Tapers ........................................................................................±10 ꢀ or ±ꢁ0 ꢀ.................................... ±10 ꢀ
Independent Linearity.................................................................................±5 ꢀ...................................................... ±5 ꢀ
Absolute Minimum Resistance...................................................................ꢁ ohms maximum.................................. ꢁ ohms maximum
Effective Electrical Angle............................................................................ꢁ70 ° ±5 ° .............................................. ꢁ70 ° ±5 °
Contact Resistance Variation .....................................................................ꢁ ꢀ........................................................ ꢁ ꢀ
Dielectric Withstanding Voltage (MIL-STD-ꢁ0ꢁ – Method 301)
Sea Level..............................................................................................1,500 VAC minimum.............................. 1,500 VAC minimum
70,000 ..................................................................................................500 VAC minimum................................. 500 VAC minimum
Insulation Resistance .................................................................................1,000 megohms minimum..................... 1,000 megohms minimum
Power Rating At 70 °C (Derate To 0 At 1ꢁ5 °C)
(Voltage Limited By Power Dissipation or 350 VAC, Whichever Is Less)
Linear Tapers........................................................................................0.5 watt.................................................. 1.0 watt
Audio Tapers ........................................................................................0.ꢁ5 watt................................................ 0.5 watt
Theoretical Resolution................................................................................Essentially infinite.................................. Essentially infinite
1
Environmental Characteristics
Operating Temperature Range ...................................................................+1 °C to +1ꢁ5 °C................................... +1 °C to +1ꢁ5 °C
Storage Temperature Range ......................................................................-55 °C to +1ꢁ5 °C.................................. -55 °C to +1ꢁ5 °C
Temperature Coefficient Over Storage Temperature Range ......................±1,000 ppmꢂ°C...................................... ±150 ppmꢂ°C
Vibration (Single Section) ...........................................................................15 G....................................................... 15 G
Total Resistance Shift...........................................................................±ꢁ ꢀ maximum..................................... ±ꢁ ꢀ maximum
Voltage Ratio Shift................................................................................±5 ꢀ maximum..................................... ±5 ꢀ maximum
Shock (Single Section) ...............................................................................30 G....................................................... 30 G
Total Resistance Shift...........................................................................+ꢁ ꢀ maximum..................................... ±ꢁ ꢀ maximum
Voltage Ratio Shift................................................................................±5 ꢀ maximum..................................... ±5 ꢀ maximum
Load Life.....................................................................................................1,000 hours ........................................... 1,000 hours
Total Resistance Shift...........................................................................±10 ꢀ TRS maximum........................... ±5 ꢀ TRS maximum
Rotational Life (No Load)............................................................................50,000 cycles ........................................ ꢁ5,000 cycles
Total Resistance Shift...........................................................................±10 ꢀ TRS maximum........................... ±10 ꢀ TRS maximum
Contact Resistance Variation @ ꢁ5,000 Cycles ...................................±ꢁ ꢀ...................................................... ±± ꢀ
Moisture Resistance (MIL-STD-ꢁ0ꢁ, Method 103, Condition B)
Total Resistance Shift...........................................................................±10 ꢀ TRS............................................ ±5 ꢀ TRS
IP Rating
Entire Unit.............................................................................................IP6± ....................................................... IP6±
ShaftꢂBushing.......................................................................................IP65 ....................................................... IP65
Mechanical Characteristics
Stop Strength ............................................................................................................................................................................................... 56 N-cm (5 lb.-in.)
Mechanical Angle...................................................................................................................................................................................................... ꢁ90 ° ±5 °
Torque
Starting (Dual Sections).............................................................................................................................................. +0.35 N-cm (+0.5 oz.-in.) maximum
Running (Single Section).............................................................................................................................................0.15 to 1.± N-cm (0.ꢁ to ꢁ.0 oz.-in.)
Running (Dual Section)................................................................................................................................................0.35 to 1.8 N-cm (0.5 to ꢁ.5 oz.-in.)
Detent (Single Section)...................................................................................................................................................1.9± N-cm (ꢁ.75 oz.-in.) minimum
Mounting (Torque on Bushing)..........................................................................................................................1.7 to ꢁ.0 N-m (15 to 18 lb.-in.) maximum
Weight (Single Section).............................................................................................................................................................................................. 5.5 grams
(Additional Section)............................................................................................................................................................................................. 3.0 grams
Terminals ................................................................................................................................................................................................... PC pin or solder lug
Soldering Condition ..................................................................Recommended hand soldering using Sn95ꢂAg5 no clean solder, 0.0ꢁ5 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Part can be wave soldered at ꢁ60 °C (500 °F) for 5 seconds, no wash process with no clean flux.
Marking.................................................................................................................. Manufacturer’s trademark, part number, resistance value and date code.
Ganging (Multiple Section Potentiometer) ............................................................................................................................................ ꢁ sections maximum**
Hardware...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
1
At room ambient: +ꢁ5 °C nominal and 50 ꢀ relative humidity nominal, except as noted.
** Additional sections available on special request with higher minimum order quantities.
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
51/53 - Sealed 1/2 ” (12.5 mm) Square Control
Product Dimensions
PACKAGE DIMENSIONS
FMS
5.08
7.62
(.300)
MODEL 51
16.51 0.25
(.650 .010)
(.200)
6.35
(.250)
1.32
(.052)
8.89 0.18
(.350 .007)
12.5
(.492)
6.25
(.246)
.64
11.00
(.432)
TYP.
2.54
(.100)
"L"
DIA.
( .025)
7.00
(.275)
C
L
OF POT
0.74
(.029)
1.27
1.02
0.30
(.0118)
(.050)
(.040)
DIA.
6.60 0.38
(.260 .015)
2.54
(.100)
2.54
.66 .05
(.026 .002)
DIA.
3 X
4 PLCS.
7.62 0.30
5.08 0.30
(.200 .012)
6 PLCS.
(.300 .012)
(DOUBLE MODULE FRONT AND REAR BRACKET SHOWN)
(.100)
(SINGLE AND DUAL MODULE SHOWN)
2.54
(.100)
TERMINAL SPACING
PACKAGE DIMENSIONS PCB MOUNTING BRACKET
SOLDER LUG TERMINALS
MODEL 53
12.5
(.492)
.64
"L"
6.25
(.246)
7.00
11.00
(.432)
( .025)
DIA.
3
2
1
5.0 0.51
(.197 .020)
2.40
(.094)
(.275)
0.74
(.029)
0.90
(.036)
1.80
(.071)
1.32 0.25
(.052 .010)
6.60 0.38
(.260 .015)
.41 .05
( .016 .002)
0.91 .051
(.036 .002)
2 X
4.70
(.185)
2 X
5.08 0.30
(.200 .012)
5.08
(.200)
5.08
(.200)
7.62 0.30
(.300 .012)
6.35 .25
(.250 .010)
ELECTRICAL SCHEMATIC
2.54
2 X
(.100)
CW
CCW
3
1
2
ANTI-ROTATION LUG
(Style "A" Shown)
SHAFT FLAT
ORIENTATION
SUGGESTED PANEL LAYOUT
5.70
(.224)
0.41
6.20
0.80 0.30
(.031 .012)
(.016)
(.244)
1.52
(.060)
2.26
(.089)
DIA.
132 ° 5 °
CCW END
BUSHING DIAMETER
TOLERANCE
+0.25
( +.010)
.25
(.010)
FOR TOLERANCES SHOWN: .XX =
.13
(.005)
.XXX =
.80
(1/32)
SHAFT DIMENSIONS
MM
(INCHES)
DIMENSIONS:
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
51/53 - Sealed 1/2 ” (12.5 mm) Square Control
Shaft/Bushing Styles
How To Order
51
A Style Bushing
9.53
(.375)
STD. LENGTH ‘L’
A
A
D
-
B
28
-
A
15
/
A15
L
1.60 0.25
OPT.
.500
.625
.750
.875
1.000
(12.7)
(15.88)
(19.05)
(22.23)
(25.4)
(.063 .010)
Part number for multiple
section potentiometers
must have a taper
and resistance value
for each section.
1.194 0.10
OPT.
(.047 .004)
3/8-32UNEF-2A
9.53
(.375)
6.35
(.250)
SHAFT
BUSHING
RoHS IDENTIFIER
L
Compliant
6.35
(.250)
C Style Bushing
0.79 0.25
(.031 .010)
OPT.
STD. LENGTH ‘L’
ELEMENT TAPER
TYPE/TOLERANCE
Code Description
RESISTANCE
(CODE)
.375
.500
.625
.750
.875
1.000
(9.53)
(12.7)
(15.88)
(19.05)
(22.23)
(25.4)
VALUE IN OHMS
MOUNTING BRACKET/
ANTI-ROTATION LUG
(A)
Linear Cermet 1ꢀ ꢁ (28) — 150
(14) — 7.5 K
(15) — 1ꢀ K
(30) — 15 K
(16) — 20 K
(17) — 25 K
(18) — 5ꢀ K
0.79 0.10
(.031 .004)
OPT.
(H)
Linear Cermet 5 ꢀ
(06) — 200
(07) — 250
(08) — 500
(09) — 750
(1ꢀ) — 1 K
1/4-32UNEF-2A
6.35
Code Description
3.18
(.125)
A
D
L
M
N
AR Lug 9ꢀ °CW
No AR Lug or Bracket
Front Bracket
SHAFT
BUSHING
(.250)
(29) — 1.5 K (19) — 75 K
15.88
(.625)
9.53
(.375)
Rear Bracket
MAX. FLAT LENGTH
A Style Bushing -
Flatted Shaft
(11) — 2 K
(2ꢀ) — 1ꢀꢀ K
Front and Rear Bracket
1.52 0.25
OPT.
(12) — 2.5 K (23) — 500 K
(.060 .010)
STD. LENGTH ‘L’
(13) — 5 K
(1ꢀ) — 1 K
(25) — 1 M
.625
.750
.875
(15.88)
(19.05)
(22.23)
(25.4)
(B)
Linear C-P 2ꢀ ꢁ
(18) — 5ꢀ K
# SECTIONS/DETENTS
(E)
Linear C-P 10 ꢀ
(12) — 2.5 K (2ꢀ) — 1ꢀꢀ K
(13) — 5 K
(22) — 250 K
Code Description
(15) — 1ꢀ K (23) — 500 K
(16) — 20 K (25) — 1 M
(17) — 25 K
5.49 0.10
(.216 .005)
1.000
A
B
E
F
Single No Detent
OPT.
3/8-32UNEF-2A
9.53
Double No Detent
6.35
(.250)
Single w/Center Detent
Double w/Center Detent
SHAFT
BUSHING
(C)
(F)
CW Audio Cermet
10 ꢀ
(10) — 1 K
(18) — 50 K
(.375)
(12) — 2.5 K (20) — 100 K
CCW Audio Cermet
10 ꢀ
(13) — 5 K
(23) — 500 K
(15) — 10 K (25) — 1 M
(17) — 25 K
8.0
(.315)
S Style Bushing
1.52 0.25
(.060 .010)
BUSHING CONFIGURATION
Code Description
STD. LENGTH ‘L’
(D)
CW Audio C-P 2ꢀ ꢁ (1ꢀ) — 1 K
(18) — 5ꢀ K
.630
.866
.984
(16.0)
(22.0)
(25.0)
(S)
CW Audio C-P 10 ꢀ (12) — 2.5 K (2ꢀ) — 1ꢀꢀ K
A
C
R
S
U
3/8 ” D x 3/8 ” L
(13) — 5 K
(22) — 250 K
1/4 ” D x 1/4 ” L
0.79 0.10
(.031 .004)
(15) — 1ꢀ K (23) — 500 K
1ꢀ mm D x 9.5 mm L
6 mm D x 8 mm L
7 mm D x 8 mm L
(17) — 25 K (25) — 1 M
M6 X .075-6g
6.0
(G)
(T)
CCW Audio C-P
20 ꢀ
(10) — 1 K
(18) — 50 K
3.0
(.118)
(12) — 2.5 K (20) — 100 K
SHAFT
BUSHING
(2.36)
CCW Audio C-P
10 ꢀ
(13) — 5 K
(22) — 250 K
(15) — 10 K (23) — 500 K
(17) — 25 K (25) — 1 M
MODEL
(Y)
CW Dual Audio
(10) — 1 K
(18) — 50 K
8.0
(.315)
Code Description
1.52 0.25
(.060 .010)
U Style Bushing
Taper C-P 20 ꢀ
(12) — 2.5 K (20) — 100 K
51 PC Pins (.1ꢀꢀ ” centers)
53 Solder Lugs
(13) — 5 K
(22) — 250 K
STD. LENGTH ‘L’
(15) — 10 K (23) — 500 K
(17) — 25 K (25) — 1 M
.630
.866
.984
(16.0)
(22.0)
(25.0)
0.79 0.10
(.031 .004)
M7 X .075-6g
7.0
4.0
(.157)
SHAFT
BUSHING
AVAILABLE ONLY IN
SHAFT
AVAILABLE
ONLY IN
BUSHING
Code
C
(2.75)
SHAFT TYPE
BUSHINGS
LENGTHS
LENGTH
Code Description
Code
Description
(FMS)
Code Description
B
C
E
R
T
Single Slotted 1/4 ”D
Single Flatted 1/4 ”D
Single Slotted 1/8 ”D
Single Slotted 6 mmD
Single Slotted 4 mmD
Single Slotted 3 mmD
A
A
C
R
U
S
24,28
20,24,28,32
12,16,20,24,28
16,22,25
R Style Bushing
9.5
(.374)
12
16
20
24
28
32
3/8 ”
1/2 ”
5/8 ”
3/4 ”
7/8 ”
1 ”
STD. LENGTH ‘L’
1.80 0.25
(.071 .010)
A, C
.630
.866
.984
(16.0)
(22.0)
(25.0)
A, C
A, C
16,22,25
A, C
U
16,22,25
A, C
1.00 0.10
(.039 .004)
Metric
16
22
25
16 mm
22 mm
25 mm
R, S, U
R, S, U
R, S, U
M10 X 0.75-6g
10.0
6.0
(.236)
SHAFT
BUSHING
(.394)
Boldface features are Bourns standard options. All others are available with higher
minimum order quantities.
MM
(INCHES)
DIMENSIONS:
REV. 12/14
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明