99A1A-A28-A15/A15 [BOURNS]
91, 92, 93, 94, 95, 96 - 5/8 ” Square Single-Turn Panel Control 97, 99 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch; 91 ， 92 ， 93 ， 94 ， 95 ， 96 - 5/8 “方单打开控制面板97 ， 99 - 5/8 ”方单圈面板控制旋钮
| 型号： | 99A1A-A28-A15/A15 |
| 厂家： | 
BOURNS ELECTRONIC SOLUTIONS |
| 描述： | 91, 92, 93, 94, 95, 96 - 5/8 ” Square Single-Turn Panel Control 97, 99 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch |
| 文件： | 总6页 (文件大小：341K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Features
■ Available in a variety of pin-out
configurations
■ Virtually infinite electrical circuit isolation
■ Model 96 sealed for board wash
■ Metal or plastic shaft options
91, 92, 93, 94, 95, 96 - 5/8 ” Square Single-Turn Panel Control
97, 99 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
1
Initial Electrical Characteristics
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H).........................(B & E) 1 K ohms to 1 megohm......................... (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .................(D,G,S, & T) 1 K ohms to 1 megohm................. (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance...............................10 % or 20 %.................................................... 5% or 10%
Independent Linearity....................................... 5 %.................................................................. 5 %
Absolute Minimum Resistance.........................2 ohms maximum.............................................. 2 ohms maximum
Effective Electrical Angle..................................(Linear tapers) 240 ° 5 °.................................. (Linear tapers) 240 ° ꢀ °
(Audio tapers) 225 ° 5 °.................................. (Audio tapers) 225 ° ꢀ °
Contact Resistance Variation ........................... 1 %.................................................................. 1 % or ꢁ ohms (ꢂhichever is greater)
Dielectric Withstanding Voltage (MIL-STD-202, Method ꢁ01)
Sea Level ....................................................1,500 VAC minimum.......................................... 1,500 VAC minimum
70,000 Feet.................................................500 VAC minimum............................................. 500 VAC minimum
Insulation Resistance (500 VDC) ......................1,000 megohms minimum................................. 1,000 megohms minimum
Poꢂer Rating (Voltage Limited By Poꢂer Dissipation or ꢁ50 VAC, Whichever Is Less)
+70 °C Single Section Assembly................(Linear tapers) 0.5 ꢂatt...................................... (Linear tapers) 2 ꢂatts
(Audio tapers) 0.25 ꢂatt .................................... (Audio tapers) 1 ꢂatt
+70 °C Multiple Section Assembly .............(Linear tapers) 0.5 ꢂatt/section......................... (Linear tapers) 1 ꢂatt/section
(Audio tapers) 0.25 ꢂatt/section ....................... (Audio tapers) 0.5 ꢂatt/section
+125 °C.......................................................0 ꢂatt................................................................. 0 ꢂatt
Theoretical Resolution......................................Essentially infinite.............................................. Essentially infinite
1
Environmental Characteristics
Operating Temperature Range .......................... -40 °C to +125 °C ................................................-40 °C to +125 °C
Storage Temperature Range.............................. -55 °C to +125 °C ................................................-55 °C to +125 °C
Temperature Coefficient Over Storage
Temperature Range.......................................... 1,000 ppm/°C..................................................... 150 ppm/°C
Vibration (Single Section)................................... 15 G......................................................................15 G
Total Resistance Shift................................... 2 % maximum.................................................... 2 % maximum
Voltage Ratio Shift........................................ 5 % maximum.................................................... 5 % maximum
Shock (Single Section)....................................... ꢁ0 G......................................................................ꢁ0 G
Total Resistance Shift................................... 2 % maximum.................................................... 2 % maximum
Voltage Ratio Shift........................................ 5 % maximum.................................................... 5 % maximum
Load Life ............................................................ 1,000 hours ..........................................................1,000 hours
Total Resistance Shift................................... 10 % maximum.................................................. 5 % maximum
Rotational Life (No Load) ................................... 100,000 cycles.....................................................100,000 cycles
Total Resistance Shift................................... (Linear tapers) 10 ohms or 15 % TRS max.......(All tapers) 5 % TRS max.
(ꢂhichever is greater)
(Audio tapers) 20 % maximum
Contact Resistance Variation
@ 50,000 cycles ........................................... (Linear tapers) 2 %............................................. 2 %
(Audio tapers) ꢁ %............................................. ꢁ %
Moisture Resistance (MIL-STD-202, Method 10ꢁ, Condition B)
Total Resistance Shift................................... (Linear tapers) 10 % TRS maximum .................(All tapers) 5 % TRS maximum
(Audio tapers) 20 % TRS maximum
Insulation Resistance (500 VDC).................. 100 megohms minimum ......................................100 megohms minimum
IP Rating (Model 9ꢀ) .......................................... IP ꢀ5 .....................................................................IP ꢀ5
(All Others).................................................... IP 40 .....................................................................IP 40
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Additional Features
■ DPST and DPDT switch options
■ RoHS compliant versions available*
91, 92, 93, 94, 95, 96 - 5/8 ” Square Single-Turn Panel Control
97, 99 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
1
Mechanical Characteristics
Stop Strength (1/4 ” D shaft) .............................................................................................................................................45.19 N-cm (4 lb.-in.)
(1/8 ” D shaft) .............................................................................................................................................33.89 N-cm (3 lb.-in.)
Mechanical Angle.................................................................................................................................................................................300 ° 5 °
Torque
Starting........................................................................................................................................... 0.3 max. above average running torque
Running Torque
Single or Dual Section (A ,D & R Bushings)..............................................................................................0.21 to 1.06 N-cm (0.3 to 1.5 oz.-in.)
Single or Dual Section (C & U Bushings)..................................................................................................0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Mounting .................................................................................................................. (Metal Bushing) 1.7-2.0 N-m (15-18 lb.-in.) maximum
Plastic Bushing) 56-79 N-cm (5-7 lb.-in.) maximum
Variation...................................................................................................................... 0.35 N-cm (0.5 oz.-in.) maximum in 45 ° shaft travel
Weight (Single Section, Plastic Bushing)...............................................................................................................................7.3 grams nominal
Weight (Single Section, Metal Bushing)...............................................................................................................................12.7 grams nominal
(Each Additional Section)....................................................................................................................................................4 grams nominal
Terminals.................................................................................................................................Printed circuit terminals, J-Hooks or solder lugs
Soldering Condition ...........................................Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking ..................................................................................Manufacturer’s trademark, date code, resistance, manufacturer’s part number
Ganging (Multiple Section Potentiometers).............................................................................................................................2 cups maximum
Hardware...................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
NOTE: All Model 90 performance specifications do not apply to units subjected to printed circuit board cleaning procedures, except
for the sealed version (Model 96).
1
At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
91, 92, 93, 94, 95, 96 - 5/8 ” Square Single-Turn Panel Control
97, 99 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
1
Initial Electrical Characteristics
Contacts:
DPST ........................................................................................................................................................N.O/N.O., N.C./N.C. or N.O./N.C.
DPDT ..........................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ..................................................................................... 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT .....................................................................................................................................1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Contact Resistance (0.1 VDC-10 mA)...............................................................................................................................10 milliohms nominal
Contact Bounce...........................................................................................................................................................5 milliseconds maximum
Dielectric Withstanding Voltage (MIL-STD-202, Method 301)
Sea Level........................................................................................................................................................................1500 VAC minimum
Insulation Resistance................................................................................................................................................. 1000 megohms minimum
1
Environmental Characteristics
Operating Temperature Range .................................................................................................................................................... 0 °C to +70 °C
Exposure Temperature Range ................................................................................................................................................-65 °C to +125 °C
Vibration (Dual Section).................................................................................................................................................................................. 8 G
Contact Resistance.................................................................................................................................................. 10 milliohms maximum
Contact Bounce ................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section).................................................................................................................................................................................... 20 G
Contact Resistance.................................................................................................................................................. 10 milliohms maximum
Contact Bounce ................................................................................................................................................... 0.1 millisecond maximum
Rotational Life................................................................................................................................................................................25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load)........................................................... 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance................................................................................................................................................ 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ..................................................................................................................... 10 milliohms maximum
Insulation Resistance (After 24 Hours @ Room Temperature) (500 VDC)..............................................................100 megohms minimum
Housing Material.......................................................................................................High temperature, flame retardant, thermosetting plastic
1
Mechanical Characteristics
Actuating Torque (Each Section, Switch Module Only)..............................................................................3.53 to 10.59 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly) .............................................................................0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent................................................................................................................................................................................CW or CCW standard
Actuation Angle......................................................................................................................................................................................20 ° 5 °
Contact Materials.................................................................................................................................................... Fine silver with gold overlay
Terminal Styles.............................................................................................................................................................................Solder lug only
Standard Orientation........................................................................................................................................ In-line with control terminals
Optional....................................................................................................................................................Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure).................................................................................... 0.9 kg (2 lbs.) minimum
NOTE: Model 99 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1
At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
91, 92, 93, 94, 95, 96, 97, 99 - 5/8 ” Square Single-Turn
Product Dimensions
Model 92 J-Hooked
Terminals, In-Line
Model 91 & 96 PC Pin Terminals, In-Line
Model 97 1st Cup Same As Model 93
(2nd Cup - Switch)
.79 .41
(.031 .016)
15.88 .38
(.625 + .015)
15.88
.79
22.86 .43
(.90 .017)
2.77 .38
(.109 .015)
(.625)
REF.
(.031) 2 PLCS.
1.37
(.054)
13.72
(.54)
9.53 .38
(.375 .015)
6.35 .38
DIA.
(STYLE A)
3
1
12.7
(.50)
MOUNTING
SURFACE
(STYLE C)
.254
(.010)
GAP
(.250 .015)
15.88 .38
(.625 .015)
3
2
1
2.36
(.093)
1
2
3
5.08
(.20)
1.52
(.06)
16.89 .51
(.665 .020)
9.53 .38
(.375 .015)
5
6 2
2.41 X 1.144
(.095 .045)
SEE DETAIL
15.29 .56
(.602 .022)
(MODEL 91 ONLY)
FOR
SLOT 6 PLCS
SHAFT OPTIONS
2.29
(.090)
2.54 0.25
(.100 .010)
6 PLCS.
Model 94 J-Hooked
Terminals, "L" Pattern
2 PLCS.
11.05 .20
.81
(.032)
DIA.
(.435 .008)
2.54
(.100)
10.16
(.40)
2.54
8.26 0.25
(.325 .010)
(.100)
1.52
(.06)
GAP
2.77 .38
(.109 .015)
3
2 1
Model 93 PC Pin Terminals, "L" Pattern
Model 99 1st Cup Same As Model 95
(2nd Cup - Switch)
5.33 .76
(.21 .03)
.81
(.032)
R. MAX.
3.81
(.150)
24.77 .51
(.975 .020)
15.88
(.625)
REF.
MAX. TYP.
2.77 .38
(.109 .015)
12.7 1.02
(.50 .040)
5.97 .38
(.235 .015)
3
1
Bushing Styles
MOUNTING
SURFACE
3/8 THREADLESS (9.53 mm) (STYLE "D")
3/8-32 UNEF (9.53 mm) (STYLE "A")
1/4-32 UNEF (6.35 mm) (STYLE "C")
M10 X 0.75-6g (STYLE "R")
5.08 .38
(.20 .015)
.81
(.032)
TYP.
5.08
(.20)
DIA. TYP.
11.05 .20
(.435 .008)
10.16 .30
(.40 .012)
M7 X 0.75-6g (STYLE "U")
5.59 .38
(.022 .015)
5
6
2
2.41 X 1.14 4
(.095 .045)
1
1
16.89 .51
(.665 .020)
2
SLOT 6 PLCS
3
2
1
2
3
2.29
(.090)
6 PLCS.
Model 95 Solder Lug Terminals, "Triangular" Pattern
2.77 .38
(.109 .015)
4.45 .38
(.175 .015)
5.08 1.02
(.200 .040)
Switch Module Variations
Shaft Flat Orientation
5.59 .20
(.220 .008)
4.45 .38
(.175 .015)
10.16
2.03
(.080)
3 PLCS.
1
CCW
3
120 ꢀ 5 ꢀ STD.
FLAT ORIENTATION
(SHAFT AT CCW END)
.41
(.016)
4.45 .38
(.175 .015)
2
2.54
(.100)
(.40)
POTENTIOMETER
2.29
(.090)
1.02
(.040)
2.54
(.100)
WIDE X
LONG
3 PLCS.
TOTAL ROTATION 300 ꢀ
.128
(.015 )
.XX
CCW DETENT
25 ꢀ MAX.
ACTUATION
ANGLE
TOLERANCES EXCEPT AS SHOWN: DECIMAL .XXX
FRACTION 1/64
.005
CW DETENT
25 ꢀ MAX.
ANGLE 5 ꢀ
(.38)
ACTUATION ANGLE
(TYPES 50, 52, 54,
56, 58, 60, 70, 72)
(TYPES 51,
53, 55, 57, 59,
61, 71, 73)
MM
(INCHES)
DIMENSIONS:
NOTE: Switch terminals shown in vertical position.
4
4
4
3
1
3
3
1
4
2
3
1
5
6
2
1
2
2
DPST (NO/NC)
(TYPES 50, 51, 56, 57)
DPST (NC/NC)
DPST (NO/NO)
(TYPES 52, 53, 58, 59)
DPDT (NC/NC)
(TYPES 54, 55, 60, 61)
(TYPES 70, 71, 72, 73)
Switch contacts shown in detent position.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
91, 92, 93, 94, 95, 96, 97, 99 - 5/8 ” Square Single-Turn
Product Dimensions
Plastic
Shaft
Styles
SHAFT TYPE "B" (USES BUSHING A OR D)
SHAFT TYPE "D" (USES BUSHING C)
SHAFT TYPE "T" (USES BUSHING U)
1.60+.38/-.00
(.063+.015/-.000)
13.16+.00/-.15
DIA.
1.50 .25
(0.06 .001)
(.1245+.000/-.006)
6.32+.000/-.152
1.19
3.988 +0.000/-0.051
(.157 +.000/-.002)
DIA.
.79
(0.03)
(.249+.000/.006)
(.047)
STD. LENGTHS:
DIA.
12.70
15.88
19.05
STD. LENGTHS:
STD. LENGTHS:
(.500) (.625) (.750)
12.00
(.472)
16.00
22.00
(.630) (.866)
12.70
15.88
19.05
22.23
(.500) (.625) (.750) (.875)
SHAFT TYPE "C" (USES BUSHING A OR D)
SHAFT TYPE "R" (USES BUSHING R)
SHAFT TYPE "W" (USES BUSHING A OR D)
11.18 .38
(.440 .015)
14.27 .25
(.562 .010)
1.80 .25
(0.07 .001)
5.994 +0.000/-0.051
(.236 +.000/-.002)
DIA.
6.31+.025/-.051
(.2485+.001/.002)
DIA.
6.30+.000/-.152
5.49
(.216)
1.00
(.04)
48 TOOTH
(.248+.000/.006)
DIA.
STD. LENGTHS:
STD. LENGTHS:
STD. LENGTHS:
25.40
(1.00)
16.0
19.0
22.0
22.23
(.875)
(.630) (.748) (.866)
Metal
Shaft
Styles
SHAFT TYPE "A" (USES BUSHING A)
6.32+.010/-.025
SHAFT TYPE "H" (USES BUSHING A)
SHAFT TYPE "V" (USES BUSHING U)
“F” .38
(“F” .015)
6.32+.010/-.025
1.50 0.25
(.059 .010)
3.99+.000/-.035
(.1571+.0000/.0010)
(.2490+.0004/.0010)
(.2490+.0004/.0010)
DIA
DIA
DIA
0.79 0.13
(.031 .054)
5.486 .051
(.216 .002)
STD. LENGTHS:
19.05 22.23
(.500) (.625) (.750) (.875)
STD. LENGTHS:
16.0 19.0
(.472) (.630) (.748)
12.70
15.88
STD. LENGTHS:
15.88 19.05 22.23
(.500) (.625) (.750) (.875)
25.4
(1.000)
12.0
22.0
(.866)
12.70
25.4
(1.000)
FLAT LENGTH “F”:
1.60
4.78
7.95
11.13
14.30
(.563)
(.063) (.188) (.313) (.438)
SHAFT TYPE "Y" (USES BUSHING A)
SHAFT TYPE "J" (USES BUSHING R)
SHAFT TYPE "G" (USES BUSHING A)
9.12
(.359)
1.60+.38/-.00
(.063+.015/-.000)
1.80 0.25
(.071 .010)
6.00+.000/-.035
(.2362+.0000/.0010)
DIA
6.32+.010/-.025
(.2490+.0004/.0010)
.762
DIA.
1.27
(.030)
5.97
(.235)
DIA.
(.050)
1.194
(.047)
1.00 0.13
(.039 .054)
21 °
5.03 .05
(.198 .002)
DIA.
STD. LENGTHS:
STD. LENGTHS:
5.87
(.231)
8.74
12.70
15.88
19.05
22.23
25.4
(1.000)
12.0
16.0
19.0
22.0
(.866)
1.57
(.500) (.625) (.750) (.875)
(.472) (.630) (.748)
(.062)
(.344)
STD. LENGTHS:
.02
(.050)
.005
TOLERANCES EXCEPT AS SHOWN: .XX =
19.05
(.750)
MM
(INCHES)
DIMENSIONS:
.XXX =
(.127)
.0005
(.0127)
.XXXX =
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
How to Order 90 Series Panel Controls
Models 91 - 96: Part number for multiple section
potentiometers must have a taper and resistance value for
each section.
9 1
9 9
A
A
2
2
A
A
-
-
A
B
2 8
2 8
-
-
A
A
1 5
1 5
/
/
A15
R51
L
L
Models 97 & 99: Part number must contain a switch type.
RoHS IDENTIFIER
ANTI-ROTATION LUG
Single .3ꢀ5 ” (7.8 mm) R,
9ꢀ °CW
Single .305 ” (7.8 mm) R,
270 °CW
No Lug
SHAFT
LENGTH
(FMS)
AVAILABLE
ONLY IN
BUSHING
Code
A, C, D
A, C, D
A, C, D
A, D
L
Compliant
A
C
D
Blank Non-Compliant
Code Description
16
20
24
28
32
1/2 ”L
5/8 ”L
3/4 ”L
7/8 ”L
1 ”L
SWITCH TYPE (MODELS 97 & 99 ONLY)
(R50) DPST N.O./N.C. CW Detent In-Line Term
(R51) DPST N.O./N.C. CCW Detent In-Line Term
(R52) DPST N.O./N.O. CW Detent In-Line Term
(R53) DPST N.O./N.O. CCW Detent In-Line Term
(R54) DPST N.C./N.C. CW Detent In-Line Term
(R55) DPST N.C./N.C. CCW Detent In-Line Term
(R56) DPST N.O./N.C. CW Detent Horz Term
(R57) DPST N.O./N.C. CCW Detent Horz Term
(R58) DPST N.O./N.O. CW Detent Horz Term
(R59) DPST N.O./N.O. CCW Detent Horz Term
(R60) DPST N.C./N.C. CW Detent Horz Term
(R61) DPST N.C./N.C. CCW Detent Horz Term
(R70) DPDT CW Detent In-Line Term
A, D
METRIC
# SECTIONS APPLICABLE MODELS
12
16
19
22
12 mmL
16 mmL
19 mmL
22 mmL
U
1
2
Single
Dual
Models 91 Thru 96 Only
All Models, 2nd Section is
a Switch in Model 99
R, U
R
R, U
BUSHING
A
C
D
Metal Plain 3/8 ” (9.53 mm) D x 3/8 ” (9.53 mm) L
Metal Plain 1/4 ” (6.35 mm) D x 1/4 ” (6.35 mm) L
Plastic Unthreaded 3/8 ” (9.53 mm) D
x 3/8 ” (9.53 mm) L
(R71) DPDT CCW Detent In-Line Term
(R72) DPDT CW Detent Horz Term
(R73) DPDT CCW Detent Horz Term
R
U
Metal Plain 1ꢀ mm D x 9 mm L
Metal Plain 7 mm D x 9 mm L
MODEL
91 Single-Turn, In-Line PC Pins
92 Single-Turn, In-Line J-Hooks
ELEMENT TAPER
TYPE/TOLERANCE
RESISTANCE CODE
VALUE IN OHMS
93 Single-Turn, L-Pattern PC Pins
94 Single-Turn, L-Pattern J-Hooks
95 Single-Turn, Triangle-Pattern Solder Lugs
96 Single-Turn, In-Line PC Pins, Sealed*
97 Single-Turn, L-Pattern PC Pins w/Switch
99 Single-Turn, Triangle-Pattern
Solder Lugs w/Switch
(A)
Linear Cermet 1ꢀ ꢁ
Linear Cermet 5 ꢀ
(05) - 100
(28) - 150
(06) - 200
(07) - 250
(08) - 500
(09) - 750
(1ꢀ) - 1 K
(30) - 15 K
(16) - 20 K
(17) - 25 K
(18) - 5ꢀ K
(19) - 75 K
(2ꢀ) - 1ꢀꢀ K
(31) - 150 K
(H)
(29) - 1.5 K (21) - 200 K
(11) - 2 K (22) - 250 K
(12) - 2.5 K (23) - 500 K
(13) - 5 K (24) - 750 K
*Model 96 is not available in multi-gang versions.
(14) - 7.5 K (25) - 1 M
AVAILABLE ONLY IN
LENGTHS BUSHINGS
SHAFT TYPE
(15) - 1ꢀ K
(B)
(E)
Linear C-P 2ꢀ ꢁ
Linear C-P 10 ꢀ
(1ꢀ) - 1 K
(12) - 2.5 K (2ꢀ) - 1ꢀꢀ K
(13) - 5 K (22) - 250 K
(18) - 5ꢀ K
(CODE)
(CODE)
B
C
D
R
T
W
A
G
H
J
Plastic Single Slotted 1/4 " (6.35 mm) D
Plastic Single Flatted 1/4" (6.35 mm) D
Plastic Single Plain 1/8" (3.18 mm) D
Plastic Single Slotted 6 mm D
16,20,24,28
24,28
16,20,24
A,D
A,D
C
(15) - 1ꢀ K (23) - 500 K
(16) - 20 K (25) - 1 M
(17) - 25 K
Metric 16,19,22
Metric 16,19,22
32
16,20,24,28,32
16,20,24,28,32
16,20,24,28,32
Metric 12,16,19,22
Metric 12,16,19,22
24
R
U
A,D
A
A
A
R
U
A
(C)
(D)
(F)
(G)
(S)
(T)
CW Audio Cermet 10 ꢀ
CW Audio C-P 20 ꢀ
(10) - 1 K
(12) - 2.5 K (20) - 100 K
(22) - 250 K
(18) - 50 K
Plastic Single Slotted 4 mm D
Plastic Single Knurled 1/4" (6.35 mm) D
Metal Single Plain 1/4" (6.35 mm) D
Metal Single Slotted 1/4" (6.35 mm) D
Metal Single Flatted 1/4" (6.35 mm) D
Metal Single Slotted 6 mm D
CCW Audio Cermet 10 ꢀ (13) - 5 K
CCW Audio C-P 20 ꢀ
CW Audio C-P 10 ꢀ
CCW Audio C-P 10 ꢀ
(15) - 10 K (23) - 500 K
(17) - 25 K (25) - 1 M
V
Y
Metal Single Slotted 4 mm D
Metal Single Knurled 1/4" (6.35 mm) D
Boldface features are Bourns standard options.
All others are available with higher minimum order
quantities.
REV. 02/10
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明