首页 |元器件品牌

99A2A-G24-B23/R51 [BOURNS]

Potentiometer, Conductive Plastic, 0.5W, 500000ohm, 20% +/-Tol, -1000,1000ppm/Cel, 6398,;
99A2A-G24-B23/R51
型号： 99A2A-G24-B23/R51
厂家： BOURNS ELECTRONIC SOLUTIONS    BOURNS ELECTRONIC SOLUTIONS
描述：

Potentiometer, Conductive Plastic, 0.5W, 500000ohm, 20% +/-Tol, -1000,1000ppm/Cel, 6398,
文件： 总7页 (文件大小：340K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
Features  
■ Virtually infinite electrical circuit isolation  
■ Metal or plastic shaft options  
■ DPST and DPDT switch options  
■ RoHS compliant versions available*  
Model 97 & 99 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch  
Potentiometer Specifications  
1
Initial Electrical Characteristics  
Conductive Plastic Element  
Cermet Element  
Standard Resistance Range  
Linear Tapers (A, B, E, & H).........................(B & E) 1 K ohms to 1 megohm......................... (A & H) 100 ohms to 1 megohm  
Audio Tapers (C, D, F, G, S, & T) .................(D,G,S, & T) 1 K ohms to 1 megohm................. (C & F) 1 K ohms to 1 megohm  
Total Resistance Tolerance...............................10 % or 20 %.................................................... 5% or 10%  
Independent Linearity....................................... 5 %.................................................................. 5 %  
Absolute Minimum Resistance.........................2 ohms maximum.............................................. 2 ohms maximum  
Effective Electrical Angle..................................(Linear tapers) 240 ° 5 °.................................. (Linear tapers) 240 ° ꢀ °  
(Audio tapers) 225 ° 5 °.................................. (Audio tapers) 225 ° ꢀ °  
Contact Resistance Variation ........................... 1 %.................................................................. 1 % or ꢁ ohms (ꢂhichever is greater)  
Dielectric Withstanding Voltage (MIL-STD-202, Method ꢁ01)  
Sea Level ....................................................1,500 VAC minimum.......................................... 1,500 VAC minimum  
70,000 Feet.................................................500 VAC minimum............................................. 500 VAC minimum  
Insulation Resistance (500 VDC) ......................1,000 megohms minimum................................. 1,000 megohms minimum  
Poꢂer Rating (Voltage Limited By Poꢂer Dissipation or ꢁ50 VAC, Whichever Is Less)  
+70 °C Single Section Assembly................(Linear tapers) 0.5 ꢂatt...................................... (Linear tapers) 2 ꢂatts  
(Audio tapers) 0.25 ꢂatt .................................... (Audio tapers) 1 ꢂatt  
+70 °C Multiple Section Assembly .............(Linear tapers) 0.5 ꢂatt/section......................... (Linear tapers) 1 ꢂatt/section  
(Audio tapers) 0.25 ꢂatt/section ....................... (Audio tapers) 0.5 ꢂatt/section  
+125 °C.......................................................0 ꢂatt................................................................. 0 ꢂatt  
Theoretical Resolution......................................Essentially infinite.............................................. Essentially infinite  
1
Environmental Characteristics  
Operating Temperature Range .......................... -40 °C to +125 °C ................................................-40 °C to +125 °C  
Storage Temperature Range.............................. -55 °C to +125 °C ................................................-55 °C to +125 °C  
Temperature Coefficient Over Storage  
Temperature Range.......................................... 1,000 ppm/°C..................................................... 150 ppm/°C  
Vibration (Single Section)................................... 15 G......................................................................15 G  
Total Resistance Shift................................... 2 % maximum.................................................... 2 % maximum  
Voltage Ratio Shift........................................ 5 % maximum.................................................... 5 % maximum  
Shock (Single Section)....................................... ꢁ0 G......................................................................ꢁ0 G  
Total Resistance Shift................................... 2 % maximum.................................................... 2 % maximum  
Voltage Ratio Shift........................................ 5 % maximum.................................................... 5 % maximum  
Load Life ............................................................ 1,000 hours ..........................................................1,000 hours  
Total Resistance Shift................................... 10 % maximum.................................................. 5 % maximum  
Rotational Life (No Load) ................................... 100,000 cycles.....................................................100,000 cycles  
Total Resistance Shift................................... (Linear tapers) 10 ohms or 15 % TRS max.......(All tapers) 5 % TRS max.  
(ꢂhichever is greater)  
(Audio tapers) 20 % maximum  
Contact Resistance Variation  
@ 50,000 cycles ........................................... (Linear tapers) 2 %............................................. 2 %  
(Audio tapers) ꢁ %............................................. ꢁ %  
Moisture Resistance (MIL-STD-202, Method 10ꢁ, Condition B)  
Total Resistance Shift................................... (Linear tapers) 10 % TRS maximum .................(All tapers) 5 % TRS maximum  
(Audio tapers) 20 % TRS maximum  
Insulation Resistance (500 VDC).................. 100 megohms minimum ......................................100 megohms minimum  
IP Rating............................................................. IP 40 .....................................................................IP 40  
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.  
Specifications are subject to change without notice.  
Customers should verify actual device performance in their specific applications.  
Model 97 & 99 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch  
Potentiometer Specifications  
1
Mechanical Characteristics  
Stop Strength (1/4 ” D shaft) .............................................................................................................................................45.19 N-cm (4 lb.-in.)  
(1/8 ” D shaft) .............................................................................................................................................33.89 N-cm (3 lb.-in.)  
Mechanical Angle.................................................................................................................................................................................300 ° 5 °  
Torque  
Starting........................................................................................................................................... 0.3 max. above average running torque  
Running Torque  
Single or Dual Section (A & R Bushings)..................................................................................................0.21 to 1.06 N-cm (0.3 to 1.5 oz.-in.)  
Single or Dual Section (C & U Bushings)..................................................................................................0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)  
Mounting .............................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum  
Variation...................................................................................................................... 0.35 N-cm (0.5 oz.-in.) maximum in 45 ° shaft travel  
Weight (Single Section, Metal Bushing)...............................................................................................................................12.7 grams nominal  
(Each Additional Section)....................................................................................................................................................4 grams nominal  
Terminals.................................................................................................................................Printed circuit terminals, J-Hooks or solder lugs  
Soldering Condition ...........................................Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.  
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.  
Marking ..................................................................................Manufacturer’s trademark, date code, resistance, manufacturer’s part number  
Ganging (Multiple Section Potentiometers).............................................................................................................................2 cups maximum  
Hardware...................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.  
NOTE: Performance specifications do not apply to units subjected to printed circuit board cleaning procedures.  
1
At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.  
Specifications are subject to change without notice.  
Customers should verify actual device performance in their specific applications.  
Model 97 & 99 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch  
Rotary Switch Specifications  
1
Initial Electrical Characteristics  
Contacts:  
DPST ........................................................................................................................................................N.O/N.O., N.C./N.C. or N.O./N.C.  
DPDT ..........................................................................................................................................................2 N.O./N.C. (break before make)  
Power Rating (Resistive Load):  
DPST ..................................................................................... 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz  
DPDT .....................................................................................................................................1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC  
Contact Resistance (0.1 VDC-10 mA)...............................................................................................................................10 milliohms nominal  
Contact Bounce...........................................................................................................................................................5 milliseconds maximum  
Dielectric Withstanding Voltage (MIL-STD-202, Method 301)  
Sea Level........................................................................................................................................................................1500 VAC minimum  
Insulation Resistance................................................................................................................................................. 1000 megohms minimum  
1
Environmental Characteristics  
Operating Temperature Range .................................................................................................................................................... 0 °C to +70 °C  
Exposure Temperature Range ................................................................................................................................................-65 °C to +125 °C  
Vibration (Dual Section).................................................................................................................................................................................. 8 G  
Contact Resistance.................................................................................................................................................. 10 milliohms maximum  
Contact Bounce ................................................................................................................................................... 0.1 millisecond maximum  
Shock (Dual Section).................................................................................................................................................................................... 20 G  
Contact Resistance.................................................................................................................................................. 10 milliohms maximum  
Contact Bounce ................................................................................................................................................... 0.1 millisecond maximum  
Rotational Life................................................................................................................................................................................25,000 cycles  
Switch Actuating Torque (50% Duty cycle @ Rated Power Load)........................................................... 1.41 to 4.94 N-cm (2 to 7 oz.-in.)  
Contact Resistance................................................................................................................................................ 100 milliohms maximum  
Moisture Resistance (MIL-STD-202, Method 106, Condition B)  
Contact Resistance (0.1 VDC-10 mA) ..................................................................................................................... 10 milliohms maximum  
Insulation Resistance (After 24 Hours @ Room Temperature) (500 VDC)..............................................................100 megohms minimum  
Housing Material.......................................................................................................High temperature, flame retardant, thermosetting plastic  
1
Mechanical Characteristics  
Actuating Torque (Each Section, Switch Module Only)..............................................................................3.53 to 10.59 N-cm (5 to 15 oz.-in.)  
Running Torque (Out of Detent, 2-4 Module Assembly) .............................................................................0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)  
Detent................................................................................................................................................................................CW or CCW standard  
Actuation Angle......................................................................................................................................................................................20 ° 5 °  
Contact Materials.................................................................................................................................................... Fine silver with gold overlay  
Terminal Styles.............................................................................................................................................................................Solder lug only  
Standard Orientation........................................................................................................................................ In-line with control terminals  
Optional....................................................................................................................................................Rotated 90 ° CCW from standard  
Terminal Strength (Before and After Soldering Heat Exposure).................................................................................... 0.9 kg (2 lbs.) minimum  
NOTE: Performance specifications do not apply to units subjected to printed circuit board cleaning procedures.  
1
At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.  
Specifications are subject to change without notice.  
Customers should verify actual device performance in their specific applications.  
Model 97 & 99 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch  
Product Dimensions  
Model 97 PC Pin Terminals, “L” Pattern  
MOUNTING  
SURFACE  
15.ꢁꢁ  
(.6ꢀ5)  
DIA.  
1ꢂ.7ꢀ 0.ꢂꢁ  
(.540 .015)  
L
1ꢀ.70 .ꢀꢀ9  
(.500 .009)  
0.79 .0ꢀ5  
7.9ꢀ  
(.ꢂ1ꢀ)  
1.ꢂ7 0.0ꢁ  
(.054 .00ꢂ)  
ꢀ.ꢂ6 0.0ꢁ  
(.09ꢂ .00ꢂ)  
(.0ꢂ1 .010)  
SEE  
1.19  
(.047)  
“A” STYLE  
A.R. LUG  
9.5ꢂ  
(.ꢂ75)  
HOW TO ORDER  
R
CHART FOR  
BUSHING OPTIONS.  
1ꢀ.7 1.0ꢀ  
(.500 .040)  
5.0ꢁ 0.ꢂꢁ  
DIA.  
0.ꢁ1  
(.0ꢂꢀ)  
(.ꢀ00 .015)  
11.05 0.ꢀ0  
(.4ꢂ5 .00ꢁ)  
TYP.  
ꢀ.54  
(.100)  
0.76 0.05  
(.0ꢂ0 .00ꢀ)  
TYP.  
R1  
ꢀ.54  
(.100)  
SEE  
1
ꢂ
NEXT PAGE  
FOR SHAFT  
OPTIONS.  
ꢀ
Model 99 Solder Lug Terminals, "Triangular" Pattern  
5.0ꢁ 1.0ꢀ  
(.ꢀ00 .040)  
5.59 .ꢀ0  
(.ꢀꢀ0 .00ꢁ)  
ꢀ.0ꢂ  
(.0ꢁ0)  
ꢂ PLCS.  
.41  
(.016)  
ꢀ.54  
(.100)  
4.45 .ꢂꢁ  
(.175 .015)  
ꢀ.54  
(.100)  
ꢀ.ꢀ9  
(.090)  
ꢂ PLCS.  
1.0ꢀ  
(.040)  
WIDE X  
LONG  
.ꢂꢁ1  
(.015 )  
.XX  
TOLERANCES EXCEPT AS SHOWN: DECIMAL .XXX  
FRACTION 1ꢃ64  
9.65  
ANGLE 5 ꢄ  
(.ꢂꢁ)  
Specifications are subject to change without notice.  
Customers should verify actual device performance in their specific applications.  
Model 97 & 99 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch  
Product Dimensions  
Model 97  
(2nd Cup - Switch)  
Horizontal Term.  
(Switch Types R57, R59, R61, R73)  
15.88  
(.625)  
REF.  
2.77 .38  
(.109 .015)  
MOUNTING  
SURFACE  
18.42 0.38  
(.725 .015)  
3
1
15.88  
(.625)  
L
3
1
4
5
6
2
8.74 0.25  
(.344 .010)  
16.89 .51  
(.665 .020)  
15.88 0.38  
(.625 .015)  
4
5
6 2  
2.41 X 1.14  
(.095 .045)  
SLOT 6 PLCS  
2.54  
2 PLCS.  
(.100)  
2.29  
(.090)  
2.54 0.25  
(.100 .010)  
6 PLCS.  
2 PLCS.  
8.26 0.25  
(.325 .010)  
2.77 .38  
(.109 .015)  
Model 99  
(2nd Cup - Switch)  
Switch Module Variations  
Shaft Flat Orientation  
MOUNTING  
SURFACE  
1
CCW  
3
120 ꢀ 5 ꢀ STD.  
FLAT ORIENTATION  
(SHAFT AT CCW END)  
24.77 .51  
(.975 .020)  
15.88  
(.625)  
REF.  
2
2.77 .38  
(.109 .015)  
POTENTIOMETER  
3
1
L
TOTAL ROTATION 300 ꢀ  
CCW DETENT  
25 ꢀ MAX.  
ACTUATION  
ANGLE  
(TYPES 51,  
53, 55, 57, 59,  
61, 71, 73)  
CW DETENT  
25 ꢀ MAX.  
ACTUATION ANGLE  
(TYPES 50, 52, 54,  
56, 58, 60, 70, 72)  
5.59 .38  
(.022 .015)  
4
5
6
2
2.41 X 1.14  
(.095 .045)  
SLOT 6 PLCS  
16.89 .51  
(.665 .020)  
NOTE: Switch terminals shown in vertical position.  
4
4
4
3
1
3
3
1
4
2
3
1
5
6
2
1
1
2
2
DPST (NO/NC)  
(TYPES 50, 51, 56, 57)  
DPST (NC/NC)  
2
3
DPST (NO/NO)  
(TYPES 52, 53, 58, 59)  
DPDT (NC/NC)  
2.29  
(.090)  
(TYPES 54, 55, 60, 61)  
6 PLCS.  
(TYPES 70, 71, 72, 73)  
Switch contacts shown in detent position.  
4.45 .38  
2.77 .38  
(.175 .015)  
(.109 .015)  
.381  
(.015 )  
.XX  
MM  
(INCHES)  
TOLERANCES EXCEPT AS SHOWN: DECIMAL .XXX  
FRACTION 1/64  
DIMENSIONS:  
9.65  
ANGLE 5 ꢀ  
(.38)  
Specifications are subject to change without notice.  
Customers should verify actual device performance in their specific applications.  
Model 97 & 99 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch  
Product Dimensions  
Plastic  
Shaft  
Styles  
SHAFT TYPE "B" (USES BUSHING A)  
SHAFT TYPE "D" (USES BUSHING C)  
SHAFT TYPE "T" (USES BUSHING U)  
1.60+.38/-.00  
(.063+.015/-.000)  
13.16+.00/-.15  
DIA.  
1.50 .ꢀ5  
(0.06 .001)  
(.1ꢀ45+.000/-.006)  
6.3ꢀ+.000/-.15ꢀ  
3.988 +0.000/-0.051  
(.157 +.000/-.00ꢀ)  
DIA.  
.79  
(0.03)  
1.19  
(.047)  
(.ꢀ49+.000/.006)  
STD. LENGTHS:  
DIA.  
STD. LENGTHS:  
1ꢀ.70  
15.88  
19.05  
STD. LENGTHS:  
15.88  
(.500) (.6ꢀ5) (.750)  
16.0  
(.630) (.866)  
ꢀꢀ.0  
1ꢀ.70  
19.05  
ꢀꢀ.ꢀ3  
(.500) (.6ꢀ5) (.750) (.875)  
SHAFT TYPE "C" (USES BUSHING A)  
SHAFT TYPE "R" (USES BUSHING R)  
SHAFT TYPE "W" (USES BUSHING A)  
11.18 .38  
(.440 .015)  
14.ꢀ7 .ꢀ5  
(.56ꢀ .010)  
1.80 .ꢀ5  
(0.07 .001)  
5.994 +0.000/-0.051  
(.ꢀ36 +.000/-.00ꢀ)  
DIA.  
6.31+.0ꢀ5/-.051  
(.ꢀ485+.001/.00ꢀ)  
DIA.  
6.30+.000/-.15ꢀ  
5.49  
(.ꢀ16)  
1.00  
(.04)  
48 TOOTH  
(.ꢀ48+.000/.006)  
DIA.  
STD. LENGTHS:  
STD. LENGTHS:  
STD. LENGTHS:  
ꢀ5.40  
(1.00)  
16.0  
(.630) (.866)  
ꢀꢀ.0  
19.05  
(.750) (.875)  
ꢀꢀ.ꢀ3  
Metal  
Shaft  
Styles  
SHAFT TYPE "H" (USES BUSHING A)  
SHAFT TYPE "A" (USES BUSHING A)  
6.3ꢀ+.010/-.0ꢀ5  
SHAFT TYPE "S" (USES BUSHING R)  
“F” .38  
(“F” .015)  
“F” .381  
(“F” .015)  
6.3ꢀ+.010/-.0ꢀ5  
6.000+.000/-.035  
(.ꢀ490+.0004/.0010)  
DIA  
(.ꢀ490+.0004/.0010)  
(.ꢀ36ꢀ+.0000/.0014)  
DIA  
DIA  
5.486 .051  
(.ꢀ16 .00ꢀ)  
3.988 .076  
(.157 .003)  
STD. LENGTHS:  
15.88 19.05 ꢀꢀ.ꢀ3  
(.500) (.6ꢀ5) (.750) (.875)  
STD. LENGTHS:  
STD. LENGTHS:  
19.05 ꢀꢀ.ꢀ3  
1ꢀ.70  
ꢀ5.4  
(1.000)  
19.05  
ꢀꢀ.ꢀ3  
(.750) (.875)  
(.750) (.875)  
FLAT LENGTH “F”:  
FLAT LENGTH “F”:  
9.98  
(.393)  
1ꢀ.98  
(.511)  
7.95  
(.313) (.438)  
11.13  
SHAFT TYPE "E" (USES BUSHING C)  
0.79 0.ꢀ5  
3.16  
(.031 .010)  
(.1ꢀ45)  
DIA  
SHAFT TYPE "J" (USES BUSHING R)  
SHAFT TYPE "V" (USES BUSHING U)  
0.79  
(.031)  
1.80 0.ꢀ5  
(.071 .010)  
6.00+.000/-.035  
(.ꢀ36ꢀ+.0000/.0010)  
DIA  
1.50 0.ꢀ5  
(.059 .010)  
3.99+.000/-.035  
(.1571+.0000/.0010)  
STD. LENGTHS:  
DIA  
1ꢀ.0  
16.0  
19.0  
1.00 0.13  
(.039 .054)  
(.500) (.6ꢀ5) (.750)  
0.79 0.13  
(.031 .054)  
STD. LENGTHS:  
STD. LENGTHS:  
19.05 ꢀꢀ.ꢀ3  
(.750) (.875)  
16.0  
ꢀꢀ.0  
(.630) (.866)  
SHAFT TYPE "G" (USES BUSHING A)  
1.60+.38/-.00  
(.063+.015/-.000)  
6.3ꢀ+.010/-.0ꢀ5  
(.ꢀ490+.0004/.0010)  
DIA.  
.0ꢀ  
(.050)  
TOLERANCES EXCEPT AS SHOWN: .XX =  
1.194  
(.047)  
.005  
.XXX =  
(.1ꢀ7)  
.0005  
(.01ꢀ7)  
.XXXX =  
STD. LENGTHS:  
15.88 19.05  
(.500) (.6ꢀ5) (.750) (.875)  
1ꢀ.70  
ꢀꢀ.ꢀ3  
MM  
DIMENSIONS:  
(INCHES)  
Specifications are subject to change without notice.  
Customers should verify actual device performance in their specific applications.  
How to Order Model 97 & 99 Panel Controls  
9 9  
A
2
A
-
B
2 8  
-
A
1 5  
/
R51  
L
RoHS IDENTIFIER  
Compliant  
Blank Non-Compliant  
ANTI-ROTATION LUG  
Single .305 ” (7.8 mm) R,  
90 °CW  
SHAFT  
LENGTH  
(FMS)  
AVAILABLE  
ONLY IN  
BUSHING  
Code  
L
A
D
Code Description  
No Lug  
16  
20  
24  
28  
32  
1/2 ”L  
5/8 ”L  
3/4 ”L  
7/8 ”L  
1 ”L  
A, C  
A, C  
A, C  
A
SWITCH TYPE  
(R50) DPST N.O./N.C. CW Detent In-Line Term  
(R51) DPST N.O./N.C. CCW Detent In-Line Term  
(R52) DPST N.O./N.O. CW Detent In-Line Term  
(R53) DPST N.O./N.O. CCW Detent In-Line Term  
(R54) DPST N.C./N.C. CW Detent In-Line Term  
(R55) DPST N.C./N.C. CCW Detent In-Line Term  
(R57) DPST N.O./N.C. CCW Detent Horz Term  
(R59) DPST N.O./N.O. CCW Detent Horz Term  
(R61) DPST N.C./N.C. CCW Detent Horz Term  
(R70) DPDT CW Detent In-Line Term  
# SECTIONS  
Dual  
A
METRIC  
2
2nd Section is a Switch  
16  
22  
16 mmL  
22 mmL  
R
R
BUSHING  
A
C
R
Metal Plain 3/8 ” (9.53 mm) D x 3/8 ” (9.53 mm) L  
Metal Plain 1/4 ” (6.35 mm) D x 1/4 ” (6.35 mm) L  
Metal Plain 10 mm D x 9 mm L  
(R71) DPDT CCW Detent In-Line Term  
(R73) DPDT CCW Detent Horz Term  
MODEL  
97 Single-Turn, L-Pattern PC Pins w/Switch  
99 Single-Turn, Triangle-Pattern  
Solder Lugs w/Switch  
ELEMENT TAPER  
TYPE/TOLERANCE  
RESISTANCE CODE  
VALUE IN OHMS  
(A)  
(H)  
Linear Cermet 10 ꢀ  
Linear Cermet 5 ꢀ  
(05) - 100  
(28) - 150  
(06) - 200  
(07) - 250  
(08) - 500  
(10) - 1 K  
(11) - 2 K  
(30) - 15 K  
(16) - 20 K  
(17) - 25 K  
(18) - 50 K  
(20) - 100 K  
(21) - 200 K  
(22) - 250 K  
AVAILABLE ONLY IN  
SHAFT TYPE  
LENGTHS  
(CODE)  
BUSHINGS  
(CODE)  
(12) - 2.5 K (23) - 500 K  
B
C
D
R
T
W
A
E
G
H
J
Plastic Single Slotted 1/4 " (6.35 mm) D  
Plastic Single Flatted 1/4" (6.35 mm) D  
Plastic Single Plain 1/8" (3.18 mm) D  
Plastic Single Slotted 6 mm D  
16, 20, 24, 28  
24, 28  
16, 20, 24  
Metric 16, 22  
Metric 16, 22  
32  
16, 20, 24  
16, 20, 24  
16, 20, 24, 28  
24, 28  
Metric16, 22  
Metric 16, 22  
Metric 16, 22  
A
A
C
R
U
A
A
C
A
A
R
R
U
(13) - 5 K  
(15) - 10 K  
(10) - 1 K  
(25) - 1 M  
(B)  
(E)  
Linear C-P 20 ꢀ  
Linear C-P 10 ꢀ  
(18) - 50 K  
(12) - 2.5 K (20) - 100 K  
(13) - 5 K (22) - 250 K  
(15) - 10 K (23) - 500 K  
(16) - 20 K (25) - 1 M  
(17) - 25 K  
Plastic Single Slotted 4 mm D  
Plastic Single Knurled 1/4" (6.35 mm) D  
Metal Single Plain 1/4" (6.35 mm) D  
Metal Single Slotted 1/8" (3.18 mm) D  
Metal Single Slotted 1/4" (6.35 mm) D  
Metal Single Flatted 1/4" (6.35 mm) D  
Metal Single Slotted 6 mm D  
(C)  
(D)  
(F)  
(G)  
(S)  
(T)  
CW Audio Cermet 10 ꢀ  
CW Audio C-P 20 ꢀ  
(10) - 1 K  
(12) - 2.5 K (20) - 100 K  
(22) - 250 K  
(18) - 50 K  
CCW Audio Cermet 10 ꢀ (13) - 5 K  
CCW Audio C-P 20 ꢀ  
CW Audio C-P 10 ꢀ  
CCW Audio C-P 10 ꢀ  
(15) - 10 K (23) - 500 K  
(17) - 25 K (25) - 1 M  
S
V
Metal Single Flatted 6 mm D  
Metal Single Slotted 4 mm D  
Boldface features are Bourns standard options.  
All others are available with higher minimum order  
quantities.  
REV. 07 /11  
Specifications are subject to change without notice.  
Customers should verify actual device performance in their specific applications.  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明