BPS110-AG0P15-2DG [BOURNS]

12 mm Analog Low Pressure Sensor;


型号：	BPS110-AG0P15-2DG
厂家：	BOURNS ELECTRONIC SOLUTIONS
描述：	12 mm Analog Low Pressure Sensor
文件：	总5页 (文件大小：537K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

PRELIMINARY

Features

Applications

nꢀ Compensatedꢀanalogꢀoutput

nꢀ Ultra-lowꢀpressureꢀsensing

nꢀ Gageꢀandꢀdifferentialꢀtypes

nꢀ Forꢀuseꢀinꢀclean,ꢀdryꢀairꢀandꢀnon-corrosiveꢀꢀ

Industrial:ꢀ

nꢀ HVACꢀsystemsꢀ

nꢀ Processꢀmonitoringꢀ

nꢀ Packagingꢀautomation

**Medical:ꢀ

nꢀ Diagnosticꢀequipmentꢀ

nꢀ Analysisꢀequipment

ꢀ

gasꢀenvironments

nꢀ Tapeꢀandꢀreelꢀpackaging

nꢀ RoHSꢀcompliant*

BPS110 Series - 12 mm Analog Low Pressure Sensor

Electrical Characteristics

Supply Voltage (V ) ............................................................................................................................ 2.7 V minimum, 5 V typical, 5.5 V maximum

Supply Current @ 5 V ..............................................................................................................1.25 mA minimum, 2 mA typical, 2.4 mA maximum

Output Current...............................................................................................................................................................................................1.9 mA

Minimum Output Load Resistance ....................................................................................................................................................5 kΩ minimum

Performance Characteristics

Operating Temperature................................................................................................................................... -40 °C to +85 °C (-40 °F to +185 °F)

Storage Temperature....................................................................................................................................-55 °C to +100 °C (-67 °C to +212 °F)

Pressure Range......................................................................................0.15 to 1.0 psi (10.3 to 68.9 mbar; 1.03 to 6.89 KPa; 4.2 to 27.7 in H2O)

Output............................................................................................................................................................................................ Ampliﬁed analog

DAC Resolution...............................................................................................................................................................................................12 bit

Ratiometric Output Range (V ).................................................................................................................................................. 0.5 V to 4.5 % V

out

Accuracy over 0 °C to 60 °C (+32 °F to +140 °F)...................................................................................................................................± 1.5 % FS

Lifetime Drift ...........................................................................................................................................................................................± 0.5 % FS

Startup Time.................................................................................................................................................................................... 8 ms maximum

Analog Update Time............................................................................................................................................................................25 ms typical

Sampling Range........................................................................................................................................................................................... 200 Hz

Proof Pressure....................................................................................................................................................................... 5X full scale pressure

Burst Pressure................................................................................................................................................................................................ 10 psi

Product Characteristics

Media Compatibility.........................................................................................................................................................Non-corrosive dry gasses

Moisture Sensitivity Level.......................................................................................................................................................................................1

ESD Classiﬁcation (HBM)..................................................................................................................................................................................2 kV

Marking..................................................................................................................................................... B, model number, pressure, date code

Standard Packaging............................................................................................................................................................................ 250 pcs./reel

Weight .................................................................................................................................................................................1.306 grams (0.046 oz)

Basic Circuit Schematic

Transfer Function Formula

– V

minCompV

out

= (P

– P

max min

) •

+ P

min

psi

)

(

– V

minCompV

maxCompV

Where

= Measured Pressure in PSI

= Maximum Pressure

= Minimum Pressure

psi

max

min

max

out

ANALOG

OUT

= Minimum Voltage (Usually 0.5 V)

= Maximum Voltage (Usually 4.5 V)

= Output Voltage (Pin 6)

out

SSC

GND

Consult factory for custom options such as supply voltage,

temperature calibration range, output range accuracy

speciﬁcation, and update rate.

Note: Power supply decoupling and output ﬁltering included.

ꢀꢀꢀꢀ*ꢀRoHSꢀDirectiveꢀ2015/863,ꢀMarꢀ31,ꢀ2015ꢀandꢀAnnex.

**ꢀ Bourns^®ꢀproductsꢀhaveꢀnotꢀbeenꢀspeciﬁcallyꢀdesignedꢀandꢀtestedꢀforꢀFDAꢀClassꢀIIIꢀapplicationsꢀandꢀequivalentꢀapplicationsꢀcoveredꢀbyꢀotherꢀregulatoryꢀauthorityꢀsuchꢀasꢀtheꢀEuropeanꢀ

ꢀ

Counsel,ꢀandꢀtheirꢀuseꢀinꢀsuchꢀapplicationsꢀisꢀneitherꢀrecommendedꢀnorꢀsupported.ꢀ

Speciﬁcationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.

Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspeciﬁcꢀapplications.ꢀ

Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspeciﬁcꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.

BPS110 Series - 12 mm Analog Low Pressure Sensor

3312 - 2 mm SMD Trimming Potentiometer

Cross Section

Terminal Assignment

DEVICE PINOUT

MEMS Sensing Element

(Differential Pressure)

Cover/Mechanical Protection

Soft Die Attach Material

N/C

Ground

N/C

Integrated Signal

Conditioning

(ASIC)

out

N/C

Media Inlet Ports

Filter Capacitor

Electrical Connections

Recommended PCB Layout

Product Dimensions

2.5

(0.098)

3.6

(0.142)

2.5

(0.098)

2.5

(0.098)

2.2

(0.087)

DIA.

12.7

(0.500)

11.4

(0.449)

11.3

(0.445)

10.2

(0.402)

1.3

(0.051)

2.5

(0.098)

1.9

(0.075)

SMT LANDING PAD LAYOUT

ꢀ

(INCHES)

DIMENSIONS:

ꢀ

8.4

(0.331)

ꢀ

0.3

TOLERANCES:ꢀ

ꢀ

(0.012)

2.5

(0.098)

2.5

(0.098)

2.5

(0.098)

Speciﬁcationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.

Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspeciﬁcꢀapplications.ꢀ

BPS110 Series - 12 mm Analog Low Pressure Sensor

3312 - 2 mm SMD Trimming Potentiometer

How To Order

BPS110 - A G 0P15 - 2 D G

Model Series

Analog Ampliﬁed

Media Compatibility

A = Air/Gas

Pressure Type

G = Gauge

D = Differential

Pressure (psi)

0P15 = 0.15

0P30 = 0.30

01P0 = 1.0

Terminal Pins

2 = Surface Mount Terminals

Port Style

D = Dual Port, Horizontal

Packaging Designator

G = 250 pcs. per 13-inch Reel

Solder Proﬁle

300

250 °C Max.

(5 Seconds Max.)

200

100

150 5 °C

Notes:

1. No clean solder paste is recommended.

2. Aqueous wash is not recommended.

Time

3. Use of water soluble soldering ﬂux

should be avoided due to possible

corrosion.

80-100 Seconds

60 Seconds Max.

4. Multiple passes through the soldering

process is not recommended.

Processing Method: Reflow soldering with infrared heat or forced air convection (only once).

Speciﬁcationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.

Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspeciﬁcꢀapplications.ꢀ

BPS110 Series - 12 mm Analog Low Pressure Sensor

3312 - 2 mm SMD Trimming Potentiometer

Packaging Speciﬁcation

250 pieces per 13-inch reel.

Meets speciﬁcations of EIA-481-1 or EIA-481-2.

3.81

(0.15)

EQUAL SPACED

4.0

(0.157)

29.21

(1.15)

3 PLCS.

2.0

12.7

(0.5)

20.32

(0.8)

(0.079)

DIA.

101.6

(4.0)

32.0

(1.260)

330.2

(13.0)

25.4

(1.0)

16.0

(0.630)

DIA.

ꢀ

(INCHES)

ꢀ 0.25

TOLERANCES:ꢀ

DIMENSIONS:

ꢀ

(0.010)

Asia-Paciﬁc: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com

EMEA: Tel: +36 88 520 390 • Email: eurocus@bourns.com

The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com

www.bourns.com

07/18

Speciﬁcationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.

Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspeciﬁcꢀapplications.ꢀ

ꢀ

LegalꢀDisclaimerꢀNotice

This legal disclaimer applies to purchasers and users of Bourns^®products manufactured by or on behalf of Bourns, Inc. and

its aﬃliates (collectively, “Bourns”).

Unless otherwise expressly indicated in writing, Bourns^®products and data sheets relating thereto are subject to change

without notice. Users should check for and obtain the latest relevant information and verify that such information is current

and complete before placing orders for Bourns^®products.

The characteristics and parameters of a Bourns^®product set forth in its data sheet are based on laboratory conditions, and

statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical

requirements in generic applications. The characteristics and parameters of a Bourns^®product in a user application may vary

from the data sheet characteristics and parameters due to (i) the combination of the Bourns^®product with other components

in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns^®

product also can and do vary in diﬀerent applications and actual performance may vary over time. Users should always verify

the actual performance of the Bourns^®product in their speciﬁc devices and applications, and make their own independent

judgments regarding the amount of additional test margin to design into their device or application to compensate for

diﬀerences between laboratory and real world conditions.

Unless Bourns has explicitly designated an individual Bourns^®product as meeting the requirements of a particular industry

standard (e.g., ISO/TS 16949) or a particular qualiﬁcation (e.g., UL listed or recognized), Bourns is not responsible for any

failure of an individual Bourns^®product to meet the requirements of such industry standard or particular qualiﬁcation. Users

of Bourns^®products are responsible for ensuring compliance with safety-related requirements and standards applicable to

their devices or applications.

Bourns^®products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining

applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property

or environmental damage. Unless expressly and speciﬁcally approved in writing by two authorized Bourns representatives

on a case-by-case basis, use of any Bourns^®products in such unauthorized applications might not be safe and thus is at

the user’s sole risk. Life-critical applications include devices identiﬁed by the U.S. Food and Drug Administration as Class III

devices and generally equivalent classiﬁcations outside of the United States.

Bourns expressly identiﬁes those Bourns^®standard products that are suitable for use in automotive applications on such

products’ data sheets in the section entitled “Applications.” Unless expressly and speciﬁcally approved in writing by two

authorized Bourns representatives on a case-by-case basis, use of any other Bourns^®standard products in an automotive

application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns

expressly identiﬁes a sub-category of automotive application in the data sheet for its standard products (such as infotainment

or lighting), such identiﬁcation means that Bourns has reviewed its standard product and has determined that if such Bourns^®

standard product is considered for potential use in automotive applications, it should only be used in such sub-category of

automotive applications. Any reference to Bourns^®standard product in the data sheet as compliant with the AEC-Q standard

or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.

Bourns^®standard products are not tested to comply with United States Federal Aviation Administration standards generally

or any other generally equivalent governmental organization standard applicable to products designed or manufactured for

use in aircraft or space applications.

Bourns expressly identiﬁes Bourns^®standard products that are suitable for use in aircraft or space applications on such

products’ data sheets in the section entitled “Applications.” Unless expressly and speciﬁcally approved in writing by two

authorized Bourns representatives on a case-by-case basis, use of any other Bourns^®standard product in an aircraft or

space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk.

The use and level of testing applicable to Bourns^®custom products shall be negotiated on a case-by-case basis by Bourns

and the user for which such Bourns^®custom products are specially designed. Absent a written agreement between Bourns

and the user regarding the use and level of such testing, the above provisions applicable to Bourns^®standard products shall

also apply to such Bourns^®custom products.

Users shall not sell, transfer, export or re-export any Bourns^®products or technology for use in activities which involve the

design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use

Bourns^®products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions

apply to all uses and applications that violate national or international prohibitions, including embargos or international

regulations. Further, Bourns^®products and Bourns technology and technical data may not under any circumstance be

exported or re-exported to countries subject to international sanctions or embargoes. Bourns^®products may not, without

prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible

to receive U.S. commodities, software, and technical data.

To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,

incidental or indirect damages or lost revenues or lost proﬁts, and (ii) any and all implied warranties, including implied warranties

of ﬁtness for particular purpose, non-infringement and merchantability.

For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simpliﬁed Chinese

bilingual versions are available at:

Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies

PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf

C1753 05/17/18

BPS110-AG0P15-2DG [BOURNS]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E