首页 |元器件品牌

CRL0603-FW-2R40ELF [BOURNS]

RES SMD 2.4 OHM 1% 1/10W 0603;
CRL0603-FW-2R40ELF
型号： CRL0603-FW-2R40ELF
厂家： BOURNS ELECTRONIC SOLUTIONS    BOURNS ELECTRONIC SOLUTIONS
描述：

RES SMD 2.4 OHM 1% 1/10W 0603
文件： 总4页 (文件大小：471K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀSelectꢀmodelsꢀwithꢀresistanceꢀvaluesꢀ  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀlowerꢀthanꢀ100ꢀmilliohmsꢀareꢀꢀ  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀcurrentlyꢀavailableꢀbutꢀnotꢀꢀ  
recommendedꢀforꢀnewꢀdesigns.ꢀSeeꢀProductꢀ  
ObsolescenceꢀMemo.  
Features  
nꢀ RoHSꢀcompliant*  
nꢀ Valuesꢀfromꢀ0.02ꢀtoꢀ9.10ꢀohms  
nꢀ Toleranceꢀofꢀ1ꢀ%ꢀorꢀ5ꢀ%  
nꢀ Fiveꢀpackageꢀsizesꢀavailable  
nꢀ Tapeꢀandꢀreelꢀpackaging  
R
3
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ  
0
0
CRL Series - Low Value Chip Resistors  
Electrical Characteristics  
Additional Information  
Click these links for more information:  
Model  
Model  
Model  
Model  
Model  
Characteristic  
CRL0603 CRL0805 CRL1206 CRL2010 CRL2512  
Power Rating @ 70 °C (W)  
0.100  
(PR)1/2  
0.125  
0.250  
0.50  
1.00  
Operating Temperature  
Range  
PRODUCT TECHNICAL INVENTORY SAMPLES CONTACT  
LIBRARY  
-55 to +125 °C  
Derated to Zero Load at  
+125 °C  
(PR)1/2  
Maximum Working Voltage  
(PR)1/2  
(PR)1/2  
(PR)1/2  
Resistance Range 1 %  
R ≥ 0.10 Ω: E24 Series  
R < 0.10 Ω: See Value  
Table  
0.10 to  
0.91 W  
0.05 to  
0.91 W  
0.02 to  
0.91 W  
0.02 to  
0.91 W  
0.02 to  
0.91 W  
Resistance Range 5 %*  
R ≥ 0.10 Ω: E24 Series  
R < 0.10 Ω: See Value  
Table  
0.10 to  
0.91 W  
0.05 to  
0.91 W  
0.02 to  
0.91 W  
0.02 to  
0.91 W  
0.02 to  
0.91 W  
Temperature Coefficient  
0.05 Ω ≤ R ≤ 9.1 Ω  
0.02 Ω < R <0.05 Ω  
R = 0.02 Ω  
±200 PPM/°C  
±400 PPM/°C  
±600 PPM/°C  
* For resistance values ≥ 1 ohm, please see Bourns® Model CR Series.  
Value Table  
Value  
(W)  
CRL0603  
1 %  
CRL0603  
5 %  
CRL0805  
1 %  
CRL0805  
5 %  
CRL1206  
1 %  
CRL1206  
5 %  
CRL2010  
1 %  
CRL2010  
5 %  
CRL2512  
1 %  
CRL2512  
5 %  
0.020  
0.022  
0.024  
0.027  
0.030  
0.033  
0.036  
0.039  
0.040  
0.043  
0.047  
0.050  
0.051  
0.056  
0.060  
0.062  
0.068  
0.070  
0.075  
0.080  
0.082  
0.090  
0.091  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
A
A
A
A
A
A
A
A
A
A
A
P
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
P
A
A
A
A
A
A
A
A
A
A
A
P
A
A
A
P
A
A
A
P
A
A
P
A
A
A
A
A
A
A
A
A
A
A
P
A
A
A
P
A
A
A
P
A
A
P
A
A
A
A
A
A
A
A
A
A
A
P
A
A
A
P
A
A
A
P
A
A
P
A
A
A
A
A
A
A
A
A
A
A
P
A
A
A
P
A
A
A
P
A
A
P
A
A
A
A
A
A
A
A
A
A
A
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
NotꢀAvailable  
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
P = Popular Value  
A = Available Value (may have greater minimum order quantity)  
*RoHSꢀDirectiveꢀ2015/863,ꢀMarꢀ31,ꢀ2015ꢀandꢀAnnex.ꢀ  
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.  
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ  
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀ  
forthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.  
WARNING Cancer and Reproductive Harm  
www.P65Warnings.ca.gov  
CRL Series - Low Value Chip Resistors  
Environmental Characteristics  
Description  
Method  
Limit  
2.5 x (PR)1/2 for 5 seconds.  
(IEC 115-1 4.13)  
1 % Tolerance: DR ≤ ±(1 % + 0.001 W)  
5 % Tolerance: DR ≤ ±(2 % + 0.001 W)  
Short Time Overload  
(PR)1/2 for 1000 hours; 1.5 hours on; 0.5 hours off.  
(IEC 115-1 4.25.1)  
1 % Tolerance: DR ≤ ±(1 % + 0.001 W)  
5 % Tolerance: DR ≤ ±(2 % + 0.001 W)  
Load Life  
Resistance to  
Soldering Heat  
260 °C for 10 seconds.  
(IEC 115-1 4.18)  
1 % Tolerance: DR ≤ ±(0.5 % + 0.001 W)  
5 % Tolerance: DR ≤ ±(1 % + 0.001 W)  
5 cycles from -55 °C to +125 °C, 30 minutes at temperature.  
(IEC 115-1 4.19)  
1 % Tolerance: DR ≤ ±(0.5 % + 0.001 W)  
5 % Tolerance: DR ≤ ±(1 % + 0.001 W)  
Thermal Shock  
Chip Dimensions  
Model  
CRL0603  
Model  
CRL0805  
Model  
CRL1206  
Model  
CRL2010  
Model  
CRL2512  
Dimension  
1.60 ± 0.10  
(0.063 ± 0.004)  
2.00 ± 0.15  
(0.079 ± 0.006)  
3.20 ± 0.15  
(0.126 ± 0.006)  
5.00 ± 0.20  
(0.197 ± 0.008)  
6.30 ± 0.20  
(0.248 ± 0.008)  
L
W
H
0.80 ± 0.10  
(0.031 ± 0.004)  
1.25 ± 0.10  
(0.049 ± 0.004)  
1.60 ± 0.15  
(0.063 ± 0.006)  
2.50 ± 0.20  
(0.098 ± 0.008)  
3.10 ± 0.20  
(0.122 ± 0.008)  
0.45 ± 0.10  
(0.018 ± 0.004)  
0.50 ± 0.10  
(0.020 ± 0.004)  
0.60 ± 0.10  
(0.024 ± 0.004)  
0.60 ± 0.10  
(0.024 ± 0.004)  
0.60 ± 0.10  
(0.024 ± 0.004)  
0.30 ± 0.20  
(0.012 ± 0.008)  
0.40 ± 0.20  
(0.016 ± 0.008)  
0.50 ± 0.25  
(0.020 ± 0.010)  
0.60 ± 0.25  
(0.024 ± 0.010)  
0.60 ± 0.25  
(0.024 ± 0.010)  
I
1
2
0.30 ± 0.20  
(0.012 ± 0.008)  
0.40 ± 0.20  
(0.016 ± 0.008)  
0.50 ± 0.25  
(0.020 ± 0.010)  
0.60 ± 0.25  
(0.024 ± 0.010)  
0.60 ± 0.20  
(0.024 ± 0.008)  
I
Dimensional Drawing  
How to Order  
CRL 0603 - F W - R090 E LF  
I
I
1
1
Model  
(CRL = Chip Resistor Low Value)  
H
Size  
•
•
•
•
•
0603  
0805  
1206  
2010  
2512  
I
I
2
2
W
Resistance Tolerance  
F = ±1 %  
L
ꢀ
MM  
(INCHES)  
J = ±5 %  
DIMENSIONS:  
ꢀ
TCR (PPM/°C)  
W = ±200 (0.05 Ω ≤ R ≤ 0.91 Ω)  
V = ±400 (0.02 Ω < R <0.05 Ω)  
U = ±600 (0.02 Ω)  
Derating Curve  
Resistance Value (1 % or 5 %)  
•
R stands for decimal point. Three significant digits: (R090 = 0.09 W; 0R91 = 0.91 W)  
100  
80  
60  
40  
20  
0
Packaging  
•
•
CRL0603, CRL0805, CRL1206: E = Paper Tape, Plastic Reel, 5,000 pcs.  
CRL2010, CRL2512: E = Embossed Plastic Tape, Plastic Reel, 4,000 pcs.  
Termination  
LF = Tin-plated (RoHS compliant)  
-55  
0
125  
70  
(°C) Ambient temperature  
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.  
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ  
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.  
CRL Series - Low Value Chip Resistors  
Packaging Dimensions - Tape  
Model  
CRL0603  
Model  
CRL0805  
Model  
CRL1206  
Model  
CRL2010  
Model  
CRL2512  
Dimension  
1.10 ± 0.10  
(0.043 ± 0.004)  
1.65 +0.20 / -0.10  
(0.065 +0.008 / -.004) (0.077 +0.004 / -.002)  
1.95 +0.10 / -0.05  
2.80 ± 0.20  
(0.110 ± 0.008)  
3.50 ± 0.20  
(0.138 ± 0.008)  
A
B
W
F
1.90 ± 0.10  
(0.075 ± 0.004)  
2.40 +0.20 / -0.10  
(0.094 +0.008 / -.004)  
3.50 ± 0.10  
(0.138 ± 0.004)  
5.50 ± 0.20  
(0.217 ± 0.008)  
6.70 ± 0.20  
(0.264 ± 0.008)  
8.00 ± 0.20  
(0.315 ± 0.008)  
8.00 ± 0.20  
(0.315 ± 0.008)  
8.00 ± 0.20  
(0.315 ± 0.008)  
12.0 ± 0.30  
(0.472 ± 0.012)  
12.00 ± 0.30  
(0.472 ± 0.012)  
3.50 ± 0.05  
(0.138 ± 0.002)  
3.50 ± 0.05  
(0.138 ± 0.002)  
3.50 ± 0.05  
(0.138 ± 0.002)  
5.50 ± 0.05  
(0.217 ± 0.002)  
5.50 ± 0.05  
(0.217 ± 0.002)  
4.00 ± 0.10  
(0.157 ± 0.004)  
4.00 ± 0.10  
(0.157 ± 0.004)  
4.00 ± 0.10  
(0.157 ± 0.004)  
4.00 ± 0.10  
(0.157 ± 0.004)  
4.00 ± 0.10  
(0.157 ± 0.004)  
P
0
Packaging Dimensions - Reel  
Model  
CRL0603  
Model  
CRL0805  
Model  
CRL1206  
Model  
CRL2010  
Model  
CRL2512  
Dimension  
80.00 ± 1.00  
(3.150 ± 0.040)  
80.00 ± 1.00  
(3.150 ± 0.040)  
80.00 ± 1.00  
(3.150 ± 0.040)  
80.00 ± 0.20  
(3.150 ± 0.008)  
80.00 ± 0.20  
(3.150 ± 0.008)  
N
D
T
20.50  
(0.807)  
20.50  
(0.807)  
20.50  
(0.807)  
20.00  
(0.787)  
20.00  
(0.787)  
MIN.  
MIN.  
10.00 ± 1.50  
(0.394 ± 0.059)  
10.00 ± 1.50  
(0.394 ± 0.059)  
10.00 ± 1.50  
(0.394 ± 0.059)  
16.70  
(0.657)  
16.70  
(0.657)  
MAX.  
MAX.  
4.0ꢀ ꢀ0.1  
(.157ꢀ ꢀ.004)  
2.0ꢀ ꢀ0.05  
(.079ꢀ ꢀ.002)  
A
B
2.0ꢀ ꢀ0.5  
(.080ꢀ ꢀ.020)  
F
W
13.0ꢀ ꢀ0.5  
(0.512ꢀ ꢀ.020)  
N
1.75ꢀ ꢀ0.1  
(.059ꢀ ꢀ.004)  
1.5ꢀ+0.1/-0  
(.056ꢀ+ꢀ.004/-0)  
P
0
D
ꢀ
MM  
(INCHES)  
178.0ꢀ ꢀ2.0  
(7.008ꢀ ꢀ.080)  
DIMENSIONS:  
ꢀ
T
REV.ꢀ05/21  
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.  
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ  
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.  
Legal Disclaimer Notice  
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its  
affiliates (collectively, “Bourns”).  
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change  
without notice. Users should check for and obtain the latest relevant information and verify that such information is current and  
complete before placing orders for Bourns® products.  
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and  
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical  
requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary  
from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components  
in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®  
product also can and do vary in different applications and actual performance may vary over time. Users should always verify  
the actual performance of the Bourns® product in their specific devices and applications, and make their own independent  
judgments regarding the amount of additional test margin to design into their device or application to compensate for  
differences between laboratory and real world conditions.  
Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry  
standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any  
failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of  
Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their  
devices or applications.  
Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap-  
plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or  
environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a  
case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s  
sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and  
generally equivalent classifications outside of the United States.  
Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such  
products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two  
authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive  
application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns  
expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment  
or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns®  
standard product is considered for potential use in automotive applications, it should only be used in such sub-category of  
automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard  
or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.  
Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally  
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for  
use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft  
or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically  
approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard  
product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the  
user’s sole risk.  
The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and  
the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the  
user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply  
to such Bourns® custom products.  
Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the  
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use  
Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions  
apply to all uses and applications that violate national or international prohibitions, including embargos or international  
regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be  
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior  
authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible  
to receive U.S. commodities, software, and technical data.  
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,  
incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties  
of fitness for particular purpose, non-infringement and merchantability.  
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese  
bilingual versions are available at:  
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies  
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf  
C1753 05/17/18R  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明