EPS1DF19AD0024L [BOURNS]

Rotary Switch,;


型号：	EPS1DF19AD0024L
厂家：	BOURNS ELECTRONIC SOLUTIONS
描述：	Rotary Switch,
文件：	总3页 (文件大小：213K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Features

nꢀ Incrementalꢀencoderꢀ/ꢀmomentaryꢀpushꢀswitchꢀoption

nꢀ Longꢀoperatingꢀlifeꢀ

nꢀ Sturdyꢀconstruction

nꢀ Snap-inꢀmount

ꢀ

ꢀꢀEPSꢀ-ꢀDigitalꢀContactingꢀEncoderꢀWithꢀMomentaryꢀSwitchꢀOption

Electrical Characteristics

Output...................................................................................2-bit quadrature code, Channel A leads Channel B by 90 º electrically turning clockwise (CW)

Closed Circuit Resistance ...........................................................................................................................................................................5 ohms maximum

Open Circuit Resistance........................................................................................................................................................................500 K ohms minimum

Contact Rating...................................................................................................................................................10 milliamp @ 10 VDC or 0.1 watt maximum

Insulation Resistance (500 VDC) ...................................................................................................................................................1,000 megohms minimum

Dielectric Withstanding Voltage (MIL-STD-202 Method 301)

Sea Level.............................................................................................................................................................................................1,000 VAC minimum

Electrical Travel.....................................................................................................................................................................................................Continuous

Contact Bounce (15 RPM)................................................................................................................................................................ 5 milliseconds maximum

RPM (Operating) ...............................................................................................................................................................................................120 maximum

Encoder Switching Conﬁguration (applies to detented version only) .............................................................................................................. Normally Open

Phase Tolerance (CH A to CH B).............................................................................................................................................................................90 ° ± 72 °

Environmental Characteristics

Operating Temperature Range....................................................................................................................................... +1 ºC to +85 ºC (+34 °F to +185 °F)

Storage Temperature Range .......................................................................................................................................... -40 ºC to +85 ºC (-40 °F to +185 °F)

Humidity..................................................................................................................................................................MIL-STD-202, Method 103B, Condition B

Vibration ...........................................................................................................................................................................................................................15 G

Contact Bounce...........................................................................................................................................................................0.1 millisecond maximum

Shock................................................................................................................................................................................................................................50 G

Rotational Life..................................................................................................................................................................................200,000 shaft revolutions

Switch Life....................................................................................................................................................................................................... 100,000 cycles

IP Rating..........................................................................................................................................................................................................................IP 40

Mechanical Characteristics

Mechanical Angle .........................................................................................................................................................................................360 ° Continuous

Running Torque ...............................................................................................................................................................0.5 to 1.5 N-cm (0.75 to 2.25 oz-in.)

Mounting Torque.............................................................................................................................................................56 to 79 N-cm (5-7 lb.-in.) maximum

Shaft Side Load (Static)..................................................................................................................................................................4.53 kg (10 lbs.) minimum

Weight .................................................................................................................................................................................Approximately 21 gms. (0.75 oz.)

Terminals ..................................................................................................................................................................................Printed circuit board terminals

Soldering Condition .................................................................... Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.

Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean ﬂux.

Part can be wave soldered at 260 °C (500 °F) for 5 seconds, no wash process with no clean ﬂux.

Marking...............................................................................................................................................Manufacturer’s name and part number, and date code

Hardware.......................................................One lockwasher and one mounting nut supplied with each encoder, except where noted in the part number.

Switch Characteristics

Switch Type ...............................................................................................................................................................................Push Momentary, SPST N.O.

Power Rating (Resistive Load)....................................................................................................................................................10 milliamps @ 12 volts DC

Closed Switch Resistance........................................................................................................................... Less than 200 ohms @ 440 gram force on shaft

Switch Travel................................................................................................................................................................................................... 2.25 ±0.25 mm

Switch Actuation Force............................................................................................................................................................... 370 ±70 grams (5 ±1 oz.-in.)

Quadrature Output Table - This table is intended to show available outputs as currently deﬁned.

FULL CYCLE PER DETENT

(Normally Open in Detent Shown)

RECOMMENDED INCREMENTAL CONTROL DIAGRAM

FOR USE WITH A DEBOUNCE CIRCUIT

(CUSTOMERꢀLOGICꢀCIRCUITRY)

DIRECTION

FULL CYCLE PER DETENT (Normally Open in Detent Shown)

Channel A

ClosedꢀCircuit

5ꢀmsꢀDELAY

DEBOUNCE

(MCꢀ14490)

OpenꢀCircuit

DECODE

LOGIC

UP/DOWN

COUNTER

BINARY

OUTPUT

ClosedꢀCircuit

OpenꢀCircuit

MAGNITUDE

Channel B

CCW

*RoHSꢀDirectiveꢀ2002/95/ECꢀJan.ꢀ27,ꢀ2003ꢀincludingꢀannexꢀandꢀRoHSꢀRecastꢀ2011/65/EUꢀJuneꢀ8,ꢀ2011.ꢀ

Speciﬁcationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.

Theꢀdeviceꢀcharacteristicsꢀandꢀparametersꢀinꢀthisꢀdataꢀsheetꢀcanꢀandꢀdoꢀvaryꢀinꢀdifferentꢀapplicationsꢀandꢀactualꢀdeviceꢀperformanceꢀmayꢀvaryꢀoverꢀtime.

Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspeciﬁcꢀapplications.

ꢀ

EPSꢀ-ꢀDigitalꢀContactingꢀEncoderꢀWithꢀMomentaryꢀSwitchꢀOption

Product Dimensions

SNAP-IN MOUNTING - S style bushing / F style shaft

15.2

(.598)

8.20

(.323)

19.0

(.748)

5.35

(.211)

3.17

2.00

2.26

(.089)

(.125)

(.079)

4.01

(.158)

4.800

(0.189)

DIA.

8.13

(.320)

26.97

(1.061)

1.60

(.063)

4.32

(.170)

2.50

(.098)

DIA.

2.00ꢀ+0.5/-0.0

(.078ꢀ+.020/-0.0)

TOTALꢀACTUATION

TRAVEL

22.20

(.874)

0.50

(.020)

CHAMFER

Xꢀ45ꢀ°

3.60

(.142)

0.25

(.010)

7.50

(.300)

8.00

(.315)

9.00

PCB MOUNTING DIMENSIONS

(.354)

9.85

(.388)

9.34

(.368)

0.97

(.038)

2.70

RADIUS

DIA.

0.50

(.020)

0.75

(.030)

(.106)

Xꢀ45ꢀ°

CHAMFER

M9ꢀX

–ꢀ6ꢀg

18.0

(.710)

DIA.

25.00

(.984)

DIA.

24.33

(.958)

10.50

22.20

(.874)

23.00

(.905)

DIA.

(.413)

5.97

(.235)

3.97

(.156)

4.63

(.182)

1.10

(.043)

6.50

(.260)

0.80

(.031)

PINꢀꢀ1

1.06

(.042)

2.54

(.100)

TYP

(IN)

DIMENSIONS:

TOLERANCES:ꢀEXCEPTꢀWHEREꢀNOTED

ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ.51ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ.13

CHANNELꢀB

COMMON

DECIMALS:ꢀ.XXꢀ

.XXXꢀ

ꢀ(.020)ꢀ

ꢀ(.005)

CHANNELꢀA

TERMINAL

PINꢀNO.

Speciﬁcationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.

Theꢀdeviceꢀcharacteristicsꢀandꢀparametersꢀinꢀthisꢀdataꢀsheetꢀcanꢀandꢀdoꢀvaryꢀinꢀdifferentꢀapplicationsꢀandꢀactualꢀdeviceꢀperformanceꢀmayꢀvaryꢀoverꢀtime.

Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspeciﬁcꢀapplications.

ꢀ

EPSꢀ-ꢀDigitalꢀContactingꢀEncoderꢀWithꢀMomentaryꢀSwitchꢀOption

How to Order

PART NUMBERING SYSTEM

E P S 1 D - F 1 9 - A E 0 0 3 6 L

Encoder with Switch Option

RoHS IDENTIFIER

Code Description

BUSHING CONFIGURATION

Code Description

Compliant

Blank Non-Compliant

9 mm flatted x 5.35 mm length

Threaded M9 x 0.75

PERFORMANCE CODE

Code Detents Cycles/Rev.

SWITCH OPTION

Code Description

Switch (Push Momentary)

E0006

E0009

E0012

E0024

E0036

D0024

ANTI-ROTATION LUG POSITION

Code Description

None

HOUSING TERMINAL CONFIGURATION

(X indicates “Equipped With”

SHAFT STYLE (See Outline Drawing for Details)

Code Description

Code

Features

Flatted (4.8 mm Dia.)

Terminal (Rear Mounting)

Mounting Hardware Included

SHAFT LENGTH (FMS)

Available

Code Description

19 Length (19/32)

Shaft Styles

REV.ꢀ06/16

Speciﬁcationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.

Theꢀdeviceꢀcharacteristicsꢀandꢀparametersꢀinꢀthisꢀdataꢀsheetꢀcanꢀandꢀdoꢀvaryꢀinꢀdifferentꢀapplicationsꢀandꢀactualꢀdeviceꢀperformanceꢀmayꢀvaryꢀoverꢀtime.

Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspeciﬁcꢀapplications.

EPS1DF19AD0024L [BOURNS]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E