SF-0603FP050F-2 [BOURNS]
0603 SMD FAST-ACTING PRECISION T;![SF-0603FP050F-2](http://pdffile.icpdf.com/pdf2/p00320/img/icpdf/SF-0603FP037_1921935_icpdf.jpg)
型号: | SF-0603FP050F-2 |
厂家: | ![]() |
描述: | 0603 SMD FAST-ACTING PRECISION T |
文件: | 总6页 (文件大小:193K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
SinglFuse™ SF-0603FP-F Series Features
■ Single blow fuse for overcurrent protection
■ 1608 (EIA 0603) miniature footprint
■ Fast-acting precision fuse
■ UL 248-14 compliant
■ RoHS compliant* and halogen free**
■ Thin film chip design
H
■ Surface mount packaging for automated assembly
SF-0603FP-F Series - Fast Acting Precision Surface Mount Fuses
Clearing Time Characteristics for Series
Additional Information
Click these links for more information:
Clearing Time at 25 °C
% of Current Rating
Min.
Max.
100 %
200 %
300 %
4 hours
—
PRODUCT TECHNICAL INVENTORY SAMPLES CONTACT
LIBRARY
—
—
5 seconds
0.2 seconds
Electrical Characteristics
Certifications
Typical
Rated Current
Resistance
(Ω) Typ.***
Rated
Voltage
Interrupting
Rating
Model
(A)
I2t (A2s) ****
cUL: E198545
SF-0603FP015F-2
SF-0603FP020F-2
SF-0603FP025F-2
SF-0603FP0375F-2
SF-0603FP050F-2
SF-0603FP075F-2
SF-0603FP100F-2
SF-0603FP125F-2
SF-0603FP150F-2
SF-0603FP175F-2
SF-0603FP200F-2
SF-0603FP250F-2
SF-0603FP300F-2
SF-0603FP350F-2
SF-0603FP400F-2
SF-0603FP500F-2
0.15
0.20
0.25
0.375
0.50
0.75
1.00
1.25
1.50
1.75
2.00
2.50
3.00
3.50
4.00
5.00
2.189
0.00061
✓
1.294
0.00142
✓
1.095
0.00162
✓
50 A @ 35 VAC
13 A @ 65 VDC
50 A @ 35 VDC
0.478
0.0041
✓
0.184
65 VDC
0.0122
✓
0.111
0.0213
✓
0.0687
0.0478
0.0368
0.0308
0.0259
0.0209
0.0175
0.0147
0.0124
0.0095
0.0426
✓
35 A @ 35 VAC
13 A @ 65 VDC
35 A @ 35 VDC
0.0525
✓
0.0717
✓
0.101
✓
0.141
✓
0.242
35 A @ 35 VAC
50 A @ 24 VAC
35 A @ 35 VDC
50 A @ 24 VDC
✓
35 VDC
0.333
✓
0.495
✓
0.636
✓
1.11
✓
*** Resistance value measured with ≤10 % rated current at 25 °C ambient. Tolerance ±25 %.
2
**** Melting I t calculated at 0.001 second pre-arcing time.
*RoHS Directive 2015/863, Mar 31, 2015 and Annex.
**Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is
900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less.
“SinglFuse” is a trademark of Bourns, Inc.
Specifications are subject to change without notice.
WARNING Cancer
and Reproductive Harm
www.P65Warnings.ca.gov
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document,
and at www.bourns.com/docs/legal/disclaimer.pdf.
SinglFuse™ SF-0603FP-F Series Applications
■ Portable memory
■ LCD monitors
■ Disk drives
■ Cell phones
■ Rechargeable battery packs
■ Battery chargers
■ LED lighting
■ Power tools
■ PDAs
■ Set-top boxes
■ Digital cameras
■ MP3 players
■ Industrial controllers
■ Battery Management Systems (BMS)
SF-0603FP-F Series - Fast Acting Precision Surface Mount Fuses
2
Average Pre-Arcing Time vs. Current Curves
Average I t vs. t Curves
1.25 A
1.00 A
1.50 A
1.75 A
2.00 A
2.50 A
3.00 A
3.50 A
4.00 A
5.00 A
0.75 A
5.00 A
4.00 A
3.50 A
3.00 A
2.50 A
2.00 A
1.75 A
1.50 A
1.25 A
1.00 A
0.75 A
0.50 A
0.375 A
0.25 A
0.20 A
0.15 A
0.50 A
0.375 A
0.25 A
0.20 A
0.15 A
100
10
1
0.1
1
0.1
0.01
0.01
0.001
0.0001
0.001
0.0001
0.1
1
10
100
0.0001
0.001
0.01
0.1
1
10
TIME (SECONDS)
CURRENT (A)
Environmental Characteristics
Operating Temperature..................................................................................................................................................................-55 °C to +90 °C
Storage Conditions
Temperature .............................................................................................................................................................................. +5 °C to +35 °C
Humidity.........................................................................................................................................................................................40 % to 75 %
Shelf Life..........................................................................................................................................................2 years from manufacturing date
Moisture Sensitivity Level...................................................................................................................................................................................... 1
ESD Classification (HBM)............................................................................................................................................................................ Class 6
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SF-0603FP-F Series - Fast Acting Precision Surface Mount Fuses
Typical Part Marking
How to Order
Packaging
SF - 0603 FP 015 F - 2
Represents total content. Layout may vary.
Reel Dimension
Specification
Quantity
7-inch Tape and Reel
EIA 481-2
SinglFuse™
Product Designator
8,000 pieces
-2
SMD Footprint
1608 = (EIA 0603) size
Packaging Code
Fuse Blow Type
RATED CURRENT (A)
FP = Fast acting precision
= 0.150
= 0.200
= 0.250
= 0.375
= 0.500
= 0.750
= 1.000
= 1.250
= 1.500
= 1.750
= 2.000
= 2.500
= 3.000
= 3.500
= 4.000
= 5.000
Rated Current
Recommended Pad Layout
015 ~ 500 (150 mA ~ 5.0 A)
Structure Type
F = Thin film
0.80
(.031)
Packaging Type
- 2 = Tape & Reel
1.00
(.039)
Product Dimensions
1.6 0.10
(.063 .004)
2.20
(.087)
MM
DIMENSIONS:
0.30 0.10
(.012 .004)
0.81 0.10
(.032 .004)
(INCHES)
0.36 0.10
(.014 .004)
0.36 0.10
(.014 .004)
0.36 0.10
(.014 .004)
0.36 0.10
(.014 .004)
MM
(INCHES)
DIMENSIONS:
Current Rating Thermal Derating Curve
140
120
100
80
60
40
20
0
-60
-40
-20
0
20
40
60
80
100
AMBIENT TEMPERATURE (°C)
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SF-0603FP-F Series - Fast Acting Precision Surface Mount Fuses
Solder Reflow Recommendations
Profile Feature
Pb-Free Assembly
T
p
Preheat / Soak:
T
-5 °C
c
t
p
MAX. RAMP UP RATE = 3 °C/s
Temperature Min. (T
)
150 °C
200 °C
60~120 seconds
smin
MAX. RAMP DOWN RATE = 6 °C/s
Temperature Max. (T
)
smax
T
L
Time (t ) from (T
to T )
T
t
L
s
smin
smax
smax
PREHEAT AREA
Ramp Up Rate (T to T )
3 °C / second max.
L
p
T
Liquidous Temperature (T )
217 °C
smin
L
Time (t ) maintained above T
60~150 seconds
L
L
t
s
Peak Package Body
260 °C
Temperature (T )
p
Time (t )* within 5 °C of the
specified classification temperature 30 seconds*
p
25
(T )
TIME 25 °C TO PEAK
c
Ramp Down Rate (T to T )
6 °C / second max.
8 minutes max.
TIME
p
L
Time 25 °C to Peak Temperature
* Tolerancefor peak profile temperature (Tp ) is defined as a
supplier minimum and a user maximum.
Recommended Temperature Profile for Wave Soldering
10 sec. max.
260
Wave soldering is suitable for 0603 size models.
150
PREHEATING
120 seconds
TIME
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SF-0603FP-F Series - Fast Acting Precision Surface Mount Fuses
Reliability Testing
No.
Test
Requirement
Test Condition
Test Reference
≤1 A: DCR change ≤ ±10 %
>1 A: DCR change ≤ ±20 %
Refer to STP
document
1
Bending
2 mm
MIL-STD-202
Method 208
2
3
4
5
6
7
Solderability
Minimum 95 % coverage
One dip at 255 °C for 5 seconds
100 cycles between -55 °C and +125 °C
10 cycles
DCR change ≤ ±10 %
No mechanical damage
MIL-STD-202
Method 107
Thermal shock
Moisture resistance
Salt spray
DCR change ≤ ±10 %
No excessive corrosion
MIL-STD-202
Method 106
DCR change ≤ ±10 %
No excessive corrosion
MIL-STD-202
Method 101
48 hour exposure, 5 % salt solution
DCR change ≤ ±10 %
No mechanical damage
0.4 inch D.A. or 30 G between
5-3000 Hz
MIL-STD-202
Method 204
Mechanical vibration
Mechanical shock
DCR change ≤ ±10 %
No mechanical damage
MIL-STD-202
Method 213
1500 G, 0.5 ms, half-sine shocks
No electrical “opens” during testing
Voltage drop change shall be less
than ±10 % of initial value
75 % rated current for 2000 hours at
ambient temperature between
+20 °C and +30 °C
Refer to STP
document
8
Life
Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com
EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com
The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com
www.bourns.com
REV. D 03/21
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and
P[ZꢀHɉSPH[LZꢀꢁJVSSLJ[P]LS`ꢂꢀ¸)V\YUZ¹ꢃꢄ
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
^P[OV\[ꢀUV[PJLꢄꢀꢀ<ZLYZꢀZOV\SKꢀJOLJRꢀMVYꢀHUKꢀVI[HPUꢀ[OLꢀSH[LZ[ꢀYLSL]HU[ꢀPUMVYTH[PVUꢀHUKꢀ]LYPM`ꢀ[OH[ꢀZ\JOꢀPUMVYTH[PVUꢀPZꢀJ\YYLU[ꢀ
and complete before placing orders for Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns®ꢀWYVK\J[ꢀPUꢀHꢀ\ZLYꢀHWWSPJH[PVUꢀTH`ꢀ]HY`ꢀ
®
MYVTꢀ[OLꢀKH[HꢀZOLL[ꢀJOHYHJ[LYPZ[PJZꢀHUKꢀWHYHTL[LYZꢀK\Lꢀ[VꢀꢁPꢃꢀ[OLꢀJVTIPUH[PVUꢀVMꢀ[OLꢀ)V\YUZ product with other components
®
PUꢀ[OLꢀ\ZLY»ZꢀHWWSPJH[PVUꢂꢀVYꢀꢁPPꢃꢀ[OLꢀLU]PYVUTLU[ꢀVMꢀ[OLꢀ\ZLYꢀHWWSPJH[PVUꢀP[ZLSMꢄꢀꢀ;OLꢀJOHYHJ[LYPZ[PJZꢀHUKꢀWHYHTL[LYZꢀVMꢀHꢀ)V\YUZ
WYVK\J[ꢀHSZVꢀJHUꢀHUKꢀKVꢀ]HY`ꢀPUꢀKPɈLYLU[ꢀHWWSPJH[PVUZꢀHUKꢀHJ[\HSꢀWLYMVYTHUJLꢀTH`ꢀ]HY`ꢀV]LYꢀ[PTLꢄꢀꢀ<ZLYZꢀZOV\SKꢀHS^H`Zꢀ]LYPM`ꢀ
the actual performance of the Bourns®ꢀWYVK\J[ꢀPUꢀ[OLPYꢀZWLJPÄJꢀKL]PJLZꢀHUKꢀHWWSPJH[PVUZꢂꢀHUKꢀTHRLꢀ[OLPYꢀV^UꢀPUKLWLUKLU[ꢀ
Q\KNTLU[ZꢀYLNHYKPUNꢀ[OLꢀHTV\U[ꢀVMꢀHKKP[PVUHSꢀ[LZ[ꢀTHYNPUꢀ[VꢀKLZPNUꢀPU[Vꢀ[OLPYꢀKL]PJLꢀVYꢀHWWSPJH[PVUꢀ[VꢀJVTWLUZH[LꢀMVYꢀ
KPɈLYLUJLZꢀIL[^LLUꢀSHIVYH[VY`ꢀHUKꢀYLHSꢀ^VYSKꢀJVUKP[PVUZꢄ
®
<USLZZꢀ)V\YUZꢀOHZꢀL_WSPJP[S`ꢀKLZPNUH[LKꢀHUꢀPUKP]PK\HSꢀ)V\YUZ product as meeting the requirements of a particular industry
Z[HUKHYKꢀꢁLꢄNꢄꢂꢀ0:6ꢅ;:ꢀꢆꢇ ꢈ ꢃꢀVYꢀHꢀWHY[PJ\SHYꢀX\HSPÄJH[PVUꢀꢁLꢄNꢄꢂꢀ<3ꢀSPZ[LKꢀVYꢀYLJVNUPaLKꢃꢂꢀ)V\YUZꢀPZꢀUV[ꢀYLZWVUZPISLꢀMVYꢀHU`ꢀ
®
MHPS\YLꢀVMꢀHUꢀPUKP]PK\HSꢀ)V\YUZ ꢀWYVK\J[ꢀ[VꢀTLL[ꢀ[OLꢀYLX\PYLTLU[ZꢀVMꢀZ\JOꢀPUK\Z[Y`ꢀZ[HUKHYKꢀVYꢀWHY[PJ\SHYꢀX\HSPÄJH[PVUꢄꢀꢀ<ZLYZꢀ
of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to
[OLPYꢀKL]PJLZꢀVYꢀHWWSPJH[PVUZꢄ
Bourns®ꢀWYVK\J[ZꢀHYLꢀUV[ꢀYLJVTTLUKLKꢂꢀH\[OVYPaLKꢀVYꢀPU[LUKLKꢀMVYꢀ\ZLꢀPUꢀU\JSLHYꢂꢀSPMLZH]PUNꢂꢀSPMLꢉJYP[PJHSꢀVYꢀSPMLꢉZ\Z[HPUPUNꢀ
HWWSPJH[PVUZꢂꢀUVYꢀPUꢀHU`ꢀV[OLYꢀHWWSPJH[PVUZꢀ^OLYLꢀMHPS\YLꢀVYꢀTHSM\UJ[PVUꢀTH`ꢀYLZ\S[ꢀPUꢀWLYZVUHSꢀPUQ\Y`ꢂꢀKLH[OꢂꢀVYꢀZL]LYLꢀWYVWLY[`ꢀ
VYꢀLU]PYVUTLU[HSꢀKHTHNLꢄꢀꢀ<USLZZꢀL_WYLZZS`ꢀHUKꢀZWLJPÄJHSS`ꢀHWWYV]LKꢀPUꢀ^YP[PUNꢀI`ꢀ[^VꢀH\[OVYPaLKꢀ)V\YUZꢀYLWYLZLU[H[P]LZꢀ
on a case-by-case basis, use of any Bourns®ꢀWYVK\J[ZꢀPUꢀZ\JOꢀ\UH\[OVYPaLKꢀHWWSPJH[PVUZꢀTPNO[ꢀUV[ꢀILꢀZHMLꢀHUKꢀ[O\ZꢀPZꢀH[ꢀ
[OLꢀ\ZLY»ZꢀZVSLꢀYPZRꢄꢀꢀ3PMLꢉJYP[PJHSꢀHWWSPJH[PVUZꢀPUJS\KLꢀKL]PJLZꢀPKLU[PÄLKꢀI`ꢀ[OLꢀ<ꢄ:ꢄꢀ-VVKꢀHUKꢀ+Y\Nꢀ(KTPUPZ[YH[PVUꢀHZꢀ*SHZZꢀ000ꢀ
KL]PJLZꢀHUKꢀNLULYHSS`ꢀLX\P]HSLU[ꢀJSHZZPÄJH[PVUZꢀV\[ZPKLꢀVMꢀ[OLꢀ<UP[LKꢀ:[H[LZꢄ
®
)V\YUZꢀL_WYLZZS`ꢀPKLU[PÄLZꢀ[OVZLꢀ)V\YUZ ꢀZ[HUKHYKꢀWYVK\J[Zꢀ[OH[ꢀHYLꢀZ\P[HISLꢀMVYꢀ\ZLꢀPUꢀH\[VTV[P]LꢀHWWSPJH[PVUZꢀVUꢀZ\JOꢀ
WYVK\J[Z»ꢀKH[HꢀZOLL[ZꢀPUꢀ[OLꢀZLJ[PVUꢀLU[P[SLKꢀ¸(WWSPJH[PVUZꢄ¹ꢀꢀ<USLZZꢀL_WYLZZS`ꢀHUKꢀZWLJPÄJHSS`ꢀHWWYV]LKꢀPUꢀ^YP[PUNꢀI`ꢀ[^Vꢀ
®
H\[OVYPaLKꢀ)V\YUZꢀYLWYLZLU[H[P]LZꢀVUꢀHꢀJHZLꢉI`ꢉJHZLꢀIHZPZꢂꢀ\ZLꢀVMꢀHU`ꢀV[OLYꢀ)V\YUZ ꢀZ[HUKHYKꢀWYVK\J[ZꢀPUꢀHUꢀH\[VTV[P]Lꢀ
HWWSPJH[PVUꢀTPNO[ꢀUV[ꢀILꢀZHMLꢀHUKꢀ[O\ZꢀPZꢀUV[ꢀYLJVTTLUKLKꢂꢀH\[OVYPaLKꢀVYꢀPU[LUKLKꢀHUKꢀPZꢀH[ꢀ[OLꢀ\ZLY»ZꢀZVSLꢀYPZRꢄꢀꢀ0Mꢀ)V\YUZꢀ
L_WYLZZS`ꢀPKLU[PÄLZꢀHꢀZ\IꢉJH[LNVY`ꢀVMꢀH\[VTV[P]LꢀHWWSPJH[PVUꢀPUꢀ[OLꢀKH[HꢀZOLL[ꢀMVYꢀP[ZꢀZ[HUKHYKꢀWYVK\J[ZꢀꢁZ\JOꢀHZꢀPUMV[HPUTLU[ꢀ
®
VYꢀSPNO[PUNꢃꢂꢀZ\JOꢀPKLU[PÄJH[PVUꢀTLHUZꢀ[OH[ꢀ)V\YUZꢀOHZꢀYL]PL^LKꢀP[ZꢀZ[HUKHYKꢀWYVK\J[ꢀHUKꢀOHZꢀKL[LYTPULKꢀ[OH[ꢀPMꢀZ\JOꢀ)V\YUZ
Z[HUKHYKꢀWYVK\J[ꢀPZꢀJVUZPKLYLKꢀMVYꢀWV[LU[PHSꢀ\ZLꢀPUꢀH\[VTV[P]LꢀHWWSPJH[PVUZꢂꢀP[ꢀZOV\SKꢀVUS`ꢀILꢀ\ZLKꢀPUꢀZ\JOꢀZ\IꢉJH[LNVY`ꢀVMꢀ
®
H\[VTV[P]LꢀHWWSPJH[PVUZꢄꢀꢀ(U`ꢀYLMLYLUJLꢀ[Vꢀ)V\YUZ ꢀZ[HUKHYKꢀWYVK\J[ꢀPUꢀ[OLꢀKH[HꢀZOLL[ꢀHZꢀJVTWSPHU[ꢀ^P[Oꢀ[OLꢀ(,*ꢉ8ꢀZ[HUKHYKꢀ
VYꢀ¸H\[VTV[P]LꢀNYHKL¹ꢀKVLZꢀUV[ꢀI`ꢀP[ZLSMꢀTLHUꢀ[OH[ꢀ)V\YUZꢀOHZꢀHWWYV]LKꢀZ\JOꢀWYVK\J[ꢀMVYꢀ\ZLꢀPUꢀHUꢀH\[VTV[P]LꢀHWWSPJH[PVUꢄ
Bourns®ꢀZ[HUKHYKꢀWYVK\J[ZꢀHYLꢀUV[ꢀ[LZ[LKꢀ[VꢀJVTWS`ꢀ^P[Oꢀ<UP[LKꢀ:[H[LZꢀ-LKLYHSꢀ(]PH[PVUꢀ(KTPUPZ[YH[PVUꢀZ[HUKHYKZꢀNLULYHSS`ꢀ
VYꢀHU`ꢀV[OLYꢀNLULYHSS`ꢀLX\P]HSLU[ꢀNV]LYUTLU[HSꢀVYNHUPaH[PVUꢀZ[HUKHYKꢀHWWSPJHISLꢀ[VꢀWYVK\J[ZꢀKLZPNULKꢀVYꢀTHU\MHJ[\YLKꢀMVYꢀ
®
\ZLꢀPUꢀHPYJYHM[ꢀVYꢀZWHJLꢀHWWSPJH[PVUZꢄꢀ)V\YUZꢀL_WYLZZS`ꢀPKLU[PÄLZꢀ)V\YUZ standard products that are suitable for use in aircraft
VYꢀZWHJLꢀHWWSPJH[PVUZꢀVUꢀZ\JOꢀWYVK\J[Z»ꢀKH[HꢀZOLL[ZꢀPUꢀ[OLꢀZLJ[PVUꢀLU[P[SLKꢀ¸(WWSPJH[PVUZꢄ¹ꢀꢀ<USLZZꢀL_WYLZZS`ꢀHUKꢀZWLJPÄJHSS`ꢀ
®
HWWYV]LKꢀPUꢀ^YP[PUNꢀI`ꢀ[^VꢀH\[OVYPaLKꢀ)V\YUZꢀYLWYLZLU[H[P]LZꢀVUꢀHꢀJHZLꢉI`ꢉJHZLꢀIHZPZꢂꢀ\ZLꢀVMꢀHU`ꢀV[OLYꢀ)V\YUZ standard
WYVK\J[ꢀPUꢀHUꢀHPYJYHM[ꢀVYꢀZWHJLꢀHWWSPJH[PVUꢀTPNO[ꢀUV[ꢀILꢀZHMLꢀHUKꢀ[O\ZꢀPZꢀUV[ꢀYLJVTTLUKLKꢂꢀH\[OVYPaLKꢀVYꢀPU[LUKLKꢀHUKꢀPZꢀH[ꢀ
the user’s sole risk.
®
;OLꢀ\ZLꢀHUKꢀSL]LSꢀVMꢀ[LZ[PUNꢀHWWSPJHISLꢀ[Vꢀ)V\YUZ custom products shall be negotiated on a case-by-case basis by Bourns
and the user for which such Bourns®ꢀJ\Z[VTꢀWYVK\J[ZꢀHYLꢀZWLJPHSS`ꢀKLZPNULKꢄꢀꢀ(IZLU[ꢀHꢀ^YP[[LUꢀHNYLLTLU[ꢀIL[^LLUꢀ)V\YUZꢀ
®
HUKꢀ[OLꢀ\ZLYꢀYLNHYKPUNꢀ[OLꢀ\ZLꢀHUKꢀSL]LSꢀVMꢀZ\JOꢀ[LZ[PUNꢂꢀ[OLꢀHIV]LꢀWYV]PZPVUZꢀHWWSPJHISLꢀ[Vꢀ)V\YUZ standard products shall
also apply to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns®ꢀWYVK\J[ZꢀVYꢀ[LJOUVSVN`ꢀMVYꢀ\ZLꢀPUꢀHJ[P]P[PLZꢀ^OPJOꢀPU]VS]Lꢀ[OLꢀ
KLZPNUꢂꢀKL]LSVWTLU[ꢂꢀWYVK\J[PVUꢂꢀ\ZLꢀVYꢀZ[VJRWPSPUNꢀVMꢀU\JSLHYꢂꢀJOLTPJHSꢀVYꢀIPVSVNPJHSꢀ^LHWVUZꢀVYꢀTPZZPSLZꢂꢀUVYꢀZOHSSꢀ[OL`ꢀ\ZLꢀ
Bourns®ꢀWYVK\J[ZꢀVYꢀ[LJOUVSVN`ꢀPUꢀHU`ꢀMHJPSP[`ꢀ^OPJOꢀLUNHNLZꢀPUꢀHJ[P]P[PLZꢀYLSH[PUNꢀ[VꢀZ\JOꢀKL]PJLZꢄꢀꢀ;OLꢀMVYLNVPUNꢀYLZ[YPJ[PVUZꢀ
HWWS`ꢀ[VꢀHSSꢀ\ZLZꢀHUKꢀHWWSPJH[PVUZꢀ[OH[ꢀ]PVSH[LꢀUH[PVUHSꢀVYꢀPU[LYUH[PVUHSꢀWYVOPIP[PVUZꢂꢀPUJS\KPUNꢀLTIHYNVZꢀVYꢀPU[LYUH[PVUHSꢀ
®
YLN\SH[PVUZꢄꢀꢀ-\Y[OLYꢂꢀ)V\YUZ products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without
WYPVYꢀH\[OVYPaH[PVUꢀMYVTꢀ)V\YUZꢀHUKꢅVYꢀ[OLꢀ<ꢄ:ꢄꢀ.V]LYUTLU[ꢂꢀILꢀYLZVSKꢂꢀ[YHUZMLYYLKꢂꢀVYꢀYLꢉL_WVY[LKꢀ[VꢀHU`ꢀWHY[`ꢀUV[ꢀLSPNPISLꢀ
[VꢀYLJLP]Lꢀ<ꢄ:ꢄꢀJVTTVKP[PLZꢂꢀZVM[^HYLꢂꢀHUKꢀ[LJOUPJHSꢀKH[Hꢄ
;Vꢀ[OLꢀTH_PT\TꢀL_[LU[ꢀWLYTP[[LKꢀI`ꢀHWWSPJHISLꢀSH^ꢂꢀ)V\YUZꢀKPZJSHPTZꢀꢁPꢃꢀHU`ꢀHUKꢀHSSꢀSPHIPSP[`ꢀMVYꢀZWLJPHSꢂꢀW\UP[P]LꢂꢀJVUZLX\LU[PHSꢂꢀ
PUJPKLU[HSꢀVYꢀPUKPYLJ[ꢀKHTHNLZꢀVYꢀSVZ[ꢀYL]LU\LZꢀVYꢀSVZ[ꢀWYVÄ[ZꢂꢀHUKꢀꢁPPꢃꢀHU`ꢀHUKꢀHSSꢀPTWSPLKꢀ^HYYHU[PLZꢂꢀPUJS\KPUNꢀPTWSPLKꢀ^HYYHU[PLZꢀ
VMꢀÄ[ULZZꢀMVYꢀWHY[PJ\SHYꢀW\YWVZLꢂꢀUVUꢉPUMYPUNLTLU[ꢀHUKꢀTLYJOHU[HIPSP[`ꢄ
)RUꢀ\RXUꢀFRQYHQLHQFHꢁꢀFRSLHVꢀRIꢀWKLVꢀ/HJDOꢀ'LVFODLPHUꢀ1RWLFHꢀZLWKꢀ*HUPDQꢁꢀ6SDQLVKꢁꢀ-DSDQHVHꢁꢀ7UDGLWLRQDOꢀ&KLQHVHꢀDQGꢀ6LPSOLÀHGꢀ&KLQHVHꢀ
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
*ꢆꢊꢋꢌꢀꢍꢋꢅꢆꢊꢅꢆꢎ9
相关型号:
©2020 ICPDF网 联系我们和版权申明