SF-1206SA400M-2 [BOURNS]
SF-1206SA-M;型号: | SF-1206SA400M-2 |
厂家: | BOURNS ELECTRONIC SOLUTIONS |
描述: | SF-1206SA-M |
文件: | 总5页 (文件大小:573K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Features
nꢀ Slowꢀblowꢀfusingꢀspeed
AUTOMOTIVE
GRADE
nꢀ EIAꢀ1206ꢀ(3216ꢀmetric)ꢀfootprint
nꢀ DesignedꢀtoꢀULꢀ248-14
nꢀ RoHS*ꢀcompliantꢀandꢀhalogenꢀfree**
nꢀ AEC-Q200-equivalentꢀcompliant***
SF-1206SA-M Series - Automotive Grade Slow Blow SMD Fuses
Clearing Time Characteristics for Series
Additional Information
Click these links for more information:
Clearing Time at 25 °C
% of Current Rating
Min.
Max.
100 %
250 %
4 hours
—
PRODUCT TECHNICAL INVENTORY SAMPLES CONTACT
LIBRARY
—
5 seconds
Electrical Characteristics
Agency Recognition
Rated Current
Resistance
(Ω) Typ.****
Rated
Voltage
Interrupting
Typical
Model
(A)
Rating
I2t (A2s)*****
cUL: E198545
SF-1206SA050M-2
SF-1206SA075M-2
SF-1206SA100M-2
SF-1206SA150M-2
SF-1206SA200M-2
SF-1206SA250M-2
SF-1206SA300M-2
SF-1206SA350M-2
SF-1206SA400M-2
SF-1206SA450M-2
SF-1206SA500M-2
0.50
0.75
1.00
1.50
2.00
2.50
3.00
3.50
4.00
4.50
5.00
1.080
0.514
0.420
0.210
0.140
0.071
0.051
0.039
0.032
0.027
0.023
0.006
0.016
0.048
0.121
0.333
0.485
0.606
0.758
0.909
1.131
1.515
3
3
3
3
3
3
3
3
3
3
3
65 VDC
50 A @ 65 VDC
*****Resistance value measured with ≤10 % rated current at 25 °C ambient. Tolerance ±25 %.
2
*****Melting I t calculated at 0.001 second pre-arcing time.
Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com
EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com
The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com
www.bourns.com
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
*RoHSꢀDirectiveꢀ2015/863,ꢀMarꢀ31,ꢀ2015ꢀandꢀAnnex.
**ꢀBournsꢀconsidersꢀaꢀproductꢀtoꢀbeꢀ“halogenꢀfree”ꢀifꢀ(a)ꢀtheꢀBromineꢀ(Br)ꢀcontentꢀisꢀ900ꢀppmꢀorꢀless;ꢀ(b)ꢀtheꢀChlorineꢀ(Cl)ꢀcontentꢀisꢀ900ꢀppmꢀorꢀless;ꢀandꢀ(c)ꢀtheꢀtotalꢀBromineꢀ(Br)ꢀ
andꢀChlorineꢀ(Cl)ꢀcontentꢀisꢀ1500ꢀppmꢀorꢀless.
***MeetsꢀBourns’ꢀinternalꢀAEC-Q200-equivalentꢀtestꢀplan.
“SinglFuse”ꢀisꢀaꢀtrademarkꢀofꢀBourns,ꢀInc.ꢀ
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
SF-1206SA-M Series - Automotive Grade Slow Blow SMD Fuses
2
Average Pre-Arcing Time vs. Current Curves
Average I t vs. t Curves
2.5 A
2 A
3 A
3.5 A
4 A
1.5 A
1 A
0.75 A
0.5 A
4.5 A
5 A
10000
1000
100
10
10
1
5 A
4.5 A
4 A
3.5 A
3 A
2.5 A
2 A
1.5 A
1 A
0.75 A
0.5 A
0.1
1
0.01
0.001
0.0001
0.1
0.01
0.001
1
10
100
1000
0.0001
0.001
0.01
0.1
1
10
CURRENT (A)
TIME (SECONDS)
Environmental Characteristics
Current Rating Thermal Derating Curve
130
120
110
100
90
Operating Temperature
Storage Conditions
Temperature
-55 °C to +150 °C
+5 °C to +35 °C
40 % to 75 %
1
Humidity
80
Moisture Sensitivity Level
ESD Classification1
1per AEC-Q200-2, HBM
70
Class 6
60
-55 -35 -15
5
25
45
65
85 105 125 145 165
AMBIENT TEMPERATURE (°C)
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
SF-1206SA-M Series - Automotive Grade Slow Blow SMD Fuses
Typical Part Marking
How to Order
SF - 1206 S A 050 M - 2
Packaging
Represents total content. Layout may vary.
Markings in cyan color.
Reel Dimension
Specification
Quantity
7-inch Tape and Reel
EIA 481-2
SinglFuse™
Product Designator
SMD Footprint
1206 = EIA 1206
(3216 metric)
3,000 pieces
-2
Packaging Code
C
Fuse Blow Type
S = Slow Blow
Recommended Pad Layout
Automotive Grade
Rated Current
1.5
(.059)
Rated
Current Marking
Part
Rated
Current Marking
Part
050 ~ 500 = 0.5 A ~ 5 A
Structure Type
0.5 A
0.75 A
1 A
C
D
E
G
I
3 A
3.5 A
4 A
K
L
M = Ceramic Multilayer
1.8
(.071)
Packaging Type
- 2 = Tape & Reel
M
T
1.5 A
2 A
4.5 A
5 A
1.45
(.057)
N
2.5 A
J
MM
DIMENSIONS:
(INCHES)
Product Dimensions
3.2 ꢀ.2
(.126 .ꢀꢀ08
1.6 ꢀ.2
(.ꢀ63 .ꢀꢀ08
ꢀ.05 ꢀ.2
(.ꢀ33 .ꢀꢀ08
C
ꢀ.51 ꢀ.25
(.ꢀ2ꢀ .ꢀ1ꢀ8
1.6 ꢀ.2
(.ꢀ63 .ꢀꢀ08
MM
(INCHES)
DIMENSIONS:
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
SF-1206SA-M Series - Automotive Grade Slow Blow SMD Fuses
Solder Reflow Recommendations
Profile Feature
Pb-Free Assembly
Preheat / Soak:
T
p
T
-5 °C
c
Temperature Min. (T
Temperature Max. (T
)
150 °C
200 °C
60~120 seconds
t
smin
p
MAX. RAMP UP RATE = 3 °C/s
MAX. RAMP DOWN RATE = 6 °C/s
)
smax
T
L
Time (t ) from (T
to T )
s
smin
smax
T
t
L
smax
PREHEAT AREA
Ramp Up Rate (T to T )
3 °C / second max.
L
p
Liquidous Temperature (T )
217 °C
60~150 seconds
L
T
smin
Time (t ) maintained above T
L
L
Peak Package Body
t
s
260 °C
Temperature (T )
p
Time (t )* within 5 °C of the
specified classification temperature (T )
p
30 seconds*
25
c
TIME 25 °C TO PEAK
Ramp Down Rate (T to T )
6 °C / second max.
8 minutes max.
p
L
TIME
Time 25 °C to Peak Temperature
* Tolerance for peak profile temperature (Tp ) is defined as a
supplier minimum and a user maximum.
Reliability Tests
Test Items
Visual Inspection
Reference Standard
MIL-STD-883
Method 2009
High Temperature Storage
MIL-STD-202
Method 108
Low Temperature Storage
Temperature Cycling
IEC 60068-2-1
JESD22
Method JA-104
Biased Humidity
MIL-STD-202
Method 103
High Temperature Operating Life
Physical Dimension
Mechanical Vibration
Mechanical Shock
MIL-STD-202
Method 108
JESD22
Method JB-100
MIL-STD-202
Method 204
MIL-STD-202
Method 213
Resistance to Soldering Heat
Salt Spray
MIL-STD-202
Method 210
MIL-STD-202
Method 101
Solderability
MIL-STD-202
Method 208
Terminal Strength
Board Flex
AEC-Q200-006
AEC-Q200-005
Electrical Characterization
Bourns Specification
06/21
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its
affiliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information and verify that such information is current and
complete before placing orders for Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary
from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components
in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®
product also can and do vary in different applications and actual performance may vary over time. Users should always verify
the actual performance of the Bourns® product in their specific devices and applications, and make their own independent
judgments regarding the amount of additional test margin to design into their device or application to compensate for
differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of
Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their
devices or applications.
Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap-
plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or
environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a
case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s
sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and
generally equivalent classifications outside of the United States.
Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive
application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns
expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment
or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns®
standard product is considered for potential use in automotive applications, it should only be used in such sub-category of
automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard
or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.
Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft
or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically
approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard
product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the
user’s sole risk.
The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and
the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the
user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply
to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior
authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible
to receive U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,
incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties
of fitness for particular purpose, non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
C1753 05/17/18R
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明