MP930-33.0-1% [CADDOCK]

RES 33 OHM 30W 1% TO220;


型号：	MP930-33.0-1%
厂家：	Caddock Electronics, Inc.
描述：	RES 33 OHM 30W 1% TO220 电阻器
文件：	总2页 (文件大小：524K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MP900 and MP9000 Series Kool-Pak^®

Power Film Resistors TO-126, TO-220 and TO-247 Style

Page 1 of 2

MP916 Standard Resistance Values:

Tolerance MP916 ±5% Standard (20% is available).

0.010 Ω 5%

0.015 Ω 5%

MP915, MP925, and MP930

Standard Resistance Values:

Tolerance MP915, MP925, and MP930 ±1% Standard - except

as noted. (5% and 20% are available for most resistance values).

0.020 Ω 5% 0.33 Ω

0.025 Ω 5% 0.40 Ω

0.030 Ω 5% 0.50 Ω

0.033 Ω 5% 0.75 Ω

0.040 Ω 5% 1.00 Ω

7.50 Ω

8.00 Ω

10.0 Ω

12.0 Ω

15.0 Ω

20.0 Ω

25.0 Ω

27.0 Ω

30.0 Ω

33.0 Ω

40.0 Ω

47.0 Ω

50.0 Ω

56.0 Ω

75.0 Ω

100 Ω

120 Ω

150 Ω

200 Ω

250 Ω

300 Ω

330 Ω

400 Ω

470 Ω

500 Ω

560 Ω

750 Ω

1.00 K

1.50 K

2.00 K

2.50 K

3.00 K

3.30 K

4.00 K

5.00 K

7.50 K

10.0 K

15.0 K

20.0 K

25.0 K

30.0 K

33.0 K

40.0 K

47.0 K

50.0 K

56.0 K

68.0 K

75.0 K

82.0 K

100 K

0.050 Ω

0.075 Ω

0.10 Ω

0.15 Ω

0.20 Ω

0.25 Ω

0.30 Ω

1.50 Ω

2.00 Ω

2.50 Ω

3.00 Ω

3.30 Ω

4.00 Ω

5.00 Ω

Low Cost Heat Sink Mountable Design featuring

an Exposed Ceramic Heat Dissipating Mounting Surface

Use your thermal design experience with power semiconductors in TO-126, TO-220,

and TO-247 style power packages to help you get the most out of this unique family of

power resistors. The thermal design issues are the same where power handling

capability is based on the case temperature which is maintained in your design.

MP9100 Standard Resistance Values:

Tolerance MP9100 ±1% Standard.

0.050 Ω

0.075 Ω

0.10 Ω

0.15 Ω

0.20 Ω

0.25 Ω

0.30 Ω

0.33 Ω

0.40 Ω

0.50 Ω

0.75 Ω

1.00 Ω

1.50 Ω

2.00 Ω

2.50 Ω

3.00 Ω

3.30 Ω

4.00 Ω

5.00 Ω

7.50 Ω

8.00 Ω

10.0 Ω

12.0 Ω

15.0 Ω

20.0 Ω

25.0 Ω

27.0 Ω

30.0 Ω

33.0 Ω

40.0 Ω

47.0 Ω

50.0 Ω

56.0 Ω

75.0 Ω

100 Ω

MP915 TO-126StylePowerPackage

•

15Wattsat +25°C CaseTemperature, deratedtozeroat +150°C.

ExposedCeramicHeatDissipatingMountingSurface.

ResistanceRangeof 0.020ohmto1K.

For custom resistance values and tolerances contact

applications engineering.

Non-InductiveDesign.

MP916,MP925,andMP930 TO-220StylePowerPackage

Ordering Information:

•

Upto30 Wattsat +25°C CaseTemperature, deratedtozeroat +150°C.

ExposedCeramicHeatDissipatingMountingSurface.

ResistanceRangeof 0.010ohmto100K.

MP915 - 50.0 - 1%

Model Number:

Tolerance

Non-InductiveDesign.

Resistor Value:

Packaging: MP915, MP916, MP925, MP930

resistors are packaged in plastic shipping tubes,

50 pieces per tube. These resistors are available

in a 50 piece minimum quantity and in full tube

quantity increments (i.e. 50, 100, 150, etc.). The

MP9100 resistors are packaged in plastic shipping

tubes, 25 pieces per tube.

MP9100 TO-247StylePowerPackage

•

100 Wattsat +25°C CaseTemperature, deratedtozeroat +175°C.

ExposedCeramicHeatDissipatingMountingSurface.

ResistanceRangeof 0.050ohmto100ohm.

Non-InductiveDesign.

Construction of MP900 and

MP9000 Series:

The MP900 and MP9000 Series Kool-Pak^®Power

Film Resistors are constructed with Caddock's

Micronox^®resistance ﬁlm ﬁred onto a ﬂat ceramic

substrate. The terminal attachment and resistance

element geometry are configured to provide

outstanding non-inductive performance. The

ceramic substrate is positioned in the molded

package such that the resistor element and terminal

attachment areas on the substrate are

encapsulated in the molded body with the other side

of the ceramic being exposed ﬂush with the back

mounting surface of the device. This construction is

covered by one or more issued patents, also

patents pending.

New

Power Resistor

with

Exposed Ceramic

Heat Dissipating

Mounting

Surface.

Sales and Applications Engineering

17271 North Umpqua Hwy.

Roseburg, Oregon 97470-9422

Phone: (541) 496-0700

ELECTRONICS, INC.

For Caddock Distributors listed by country see caddock.com/contact/dist.html

e-mail: caddock@caddock.com • web: www.caddock.com

Fax: (541) 496-0408

28_IL134.0517

Page 2 of 2

Thermal Resistance

Resistance

Model

No.

Max.

Voltage

Power

Rating

Max. Temp.

T _MAX

Dimensions

Package

Comments

θJC

Min.

Max.

Film (J) to Case (C)

TO-126 Style

TO-220 Style

TO-247 Style

Figure 1

Figure 2

Figure 3

Ceramic mounting surface

MP915

MP916

MP925

MP930

MP9100

1.00 K

200

15 Watts

0.020 Ω

150°C

175°C

8.33°C/Watt

7.81°C/Watt

5.00°C/Watt

Power

Limited

0.010 Ω

0.019 Ω

16 Watts

100 K

5.00K

500

250

Ceramic mounting surface

25 Watts

30 Watts

100 Watts

4.99 K

0.020 Ω

0.050 Ω

4.17°C/Watt

1.50°C/Watt

Power

Limited

100 Ω

Derating Curve

Speciﬁcations:

100

Derating Using Case Temperature (T ):

Temperature Coefﬁcient for MP915, MP916,

MP925, and MP930:

TC referenced to +25°C, ∆R taken at +150°C

All power and associated overload ratings are derated

based upon case temperature using the derating curve.

The case temperature is measured at the center of the

ceramic mounting surface, with the part properly

mounted and under electrical load. Without a heat sink,

when in free air at +25°C, the MP915 is rated for 1.25

watts, the MP916, MP925, MP930 are rated for 2.25

watts, and the MP9100 is rated for 3.5 watts.

0.50 ohms and above, -20 to +80 ppm/°C

0.050 ohm to 0.49 ohms, 0 to +200 ppm/°C

0.020 ohm to 0.049 ohm, 0 to +300 ppm/°C

0.010 ohm to 0.019 ohm, 0 to +500 ppm/°C

100

CASE TEMPERATURE, °C

150 175

A - MP915, MP916, MP925, MP930 Max. Temperature, TMax = 150°C

B - MP9100 Max. Temperature, TMax = 175°C

Temperature Coefﬁcient for MP9100:

TC referenced to +25°C, ∆R taken at +175°C

The thermal design should satisfy the following equation:

Case Temperature (T ) + [Thermal Resistance (R

) x power applied (Watts)] ≤ T_MAXconsidering the full

0.50 ohms and above, -20 to +80 ppm/°C

0.050 ohm to 0.49 ohms, 0 to +150 ppm/°C

θJC

operating temperature range of the application.

Mounting Note: Mount on a smooth, clean, and ﬂat heat sink surface with a thermal interface material, such

as thermal grease. The entire exposed ceramic portion must be in thermal contact with the heat sink. When

screw mounting, use a compression washer which provides a mounting force of 150 to 300 pounds (665 to

1330 N). This will provide sufﬁcient pressure on the package over time and through large temperature varia-

tions to maintain the maximum power dissipation capability. Mounting torque to avoid package damage is 8

in-lbs. (0.90 N-m). If a spring clip is used, a clip force of 8 to 30 pounds (35 to 130 N) is recommended to be

applied to the center of the package. The clip should be round or smooth in the contact area to avoid concen-

trating the load on a small point of the plastic body of the package. Another mounting option is to use a

Operating Temperature: -55°C to T_MAX

Inductance: MP915, MP916, MP925, and MP930

10nH typical; MP9100, 20nH typical, in series when

measured at a point 0.2 inches from the resistor

body.

pressure bar method which can achieve a greater mounting force with a greater contact area.

For additional applications information regarding mounting and pulse handling see the Caddock

Applications Notes at caddock.com or contact Applications Engineering.

DWV: The dielectric strength rating of 1500 V_rmsAC

is based upon connections made between

terminals shorted, and the metal surface the part is

mounted to or a metal clip in contact with the top

surface of the part.

.094 ±.004

(2.39 ±.10) DIA.

.320 ±.010

(8.12 ±.26)

.110 ±.010

(2.79 ±.26)

.440 ±.010

(11.18 ±.26)

Insulation Resistance: 10,000 Megohms min.

The resistor element is electrically isolated from

the mounting surface.

.080 ±.020

(2.03 ±.51)

.115 ±.010

(2.92 ±.26)

MP915

0.10Ω

Figure 1

TO-126 Style

MP915

.053 ± .007

(1.35 ± .18)

.450 ±.050

(11.43 ±1.27)

Load Stability: 2,000 hours at rated power.

∆R ±(1.0 percent + 0.0005 ohm) max. Power

rating dependent upon case temperature. See

derating curve.

.030 ±.004

(.76 ± .10)

.025 ± .004 (.64 ±.10)

.058 ±.007 (1.47 ±.18)

.200 ±.010

(5.08 ±.26)

.410 ±.010

(10.41 ±.26)

.125 ±.010

(3.18 ±.26)

.125 ±.004

(3.18 ±.10) DIA.

Momentary Overload: 1.5 times rated power with

applied voltage not to exceed 1.5 times maximum

continuous operating voltage for 5 seconds. ∆R

±(0.5 percent + 0.0005 ohm) max.

Figure 2

.640 ±.010

(16.26 ±.26)

.125 ±.010

(3.18 ±.26)

MP930

10.0

TO-220 Style

MP916, MP925

and MP930

.130 ±.030

(3.30 ±.76)

Moisture Resistance: Mil-Std-202, Method 106.

∆R ±(0.5 percent + 0.0005 ohm) max.

.053 ± .007

(1.35 ± .18)

.500 ±.050

(12.70 ±1.27)

.030 ±.004

(.76 ± .10)

Thermal Shock: Mil-Std-202, Method 107, Cond. F.

∆R ±(0.5 percent + 0.0005 ohm) max.

.025 ± .004 (.64 ±.10)

.070 ±.010 (1.78 ±.26)

.200 ±.010

(5.08 ±.26)

Shock: 100G, Mil-Std-202, Method 213, Cond. I.

∆R ±(0.4 percent + 0.0005 ohm) max.

0.195 ± 0.010

(4.95 ± 0.26)

0.620 ± 0.010

(15.75 ± 0.26)

0.143 ± 0.004

(3.63 ± 0.10) Dia.

Vibration, High Frequency: Mil-Std-202, Method

204, Cond. D. ∆R ±(0.4 percent + 0.0005 ohm)

max.

0.210 ± 0.010

(5.33 ± 0.26)

Figure 3

TO-247 Style

MP9100

0.815 ± 0.010

(20.70 ± 0.26)

Terminal Strength: Mil-Std-202, Method 211,

Cond. A (Pull Test) 5 lbs. ∆R ±(0.2 percent

+ 0.0005 ohm) max.

MP 9100

50.0

0.110 ± 0.030

(2.79 ± 0.76)

0.143 ± 0.007

(3.63 ± 0.18)

Terminal Material: Solderable

0.570 ± 0.050

(14.48 ± 1.27)

0.060 ± 0.004

(1.52 ± 0.10)

Measurement Note: For these specifications,

resistance measurement shall be made at a point

0.2 inch (5.08 mm) from the resistor body.

0.032 +0.004 / -0.010

(0.81 +0.10 / -0.26)

0.400 ± 0.010

(10.16 ± 0.26)

0.095 ± 0.010

(2.41 ± 0.26)

DIMENSIONS IN INCHES AND (MILLIMETERS)

Sales and Applications Engineering

17271 North Umpqua Hwy.

Roseburg, Oregon 97470-9422

Phone: (541) 496-0700

ELECTRONICS, INC.

e-mail: caddock@caddock.com • web: www.caddock.com

For Caddock Distributors listed by country see caddock.com/contact/dist.html

Fax: (541) 496-0408

28_IL134.0517

MP930-33.0-1% [CADDOCK]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E