PACUSB-D3Y5 [CALMIRCO]
USB Downstream Port Terminator; USB下行端口终结者型号: | PACUSB-D3Y5 |
厂家: | CALIFORNIA MICRO DEVICES CORP |
描述: | USB Downstream Port Terminator |
文件: | 总9页 (文件大小:315K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PACUSB-D1/D2/D3
USB Downstream Port Terminator
Features
Product Description
•
A low-capacitance USB downstream port termina-
The PACUSB-D1/D2/D3 is a single-channel USB
downstream-port termination network. It integrates
EMI/RFI filter components R1 and C1, as recom-
mended by the USB specification as well as the
required 15kΩ pull-down resistors (R2) to GND. In
addition, PACUSB-D1/D2/D3 provides a very high
level of protection for sensitive electronic components
that may be subjected to electrostatic discharge (ESD).
The device pins will safely dissipate ESD strikes of
+15kV, exceeding the maximum requirements of the
IEC 61000-4-2 international standard. Using the MIL-
STD-883D (Method 3015) specification for Human
Body Model (HBM) ESD, all pins are protected from
contact discharges to +20kV.
tor, EMI filter, and transient over-voltage (ESD)
protector in a single surface-mounted package
ESD protection to +20kV contact discharge, per
MIL-STD-883D, Method 3015
ESD protection to +15kV contact discharge, per
IEC 61000-4-2 International Standard
Compact SOT23-5 and SC70-5 package options
save board space and lower manufacturing costs
compared to discrete solutions
Capacitors matched to a precision exceeding the
USB specification
Pin-compatible with ST Microelectronics
USBDFxxW5 USB Downstream Port Terminator
Lead-free versions available
•
•
•
•
•
•
There are three options for the value of the series
resistor R1: 15Ω, 22Ω, and 33Ω. This series resis-
tance, plus the USB driver output resistance, must be
close to the USB cable’s characteristic impedance of
45Ω (each side) to minimize transmission line reflec-
tions.
Applications
•
ESD protection and termination of USB
downstream ports
Desktop PCs
Notebooks
Set-top boxes
•
•
•
•
The PACUSB-D1/D2/D3 is manufactured in a 5-pin
SC70 or a 5-pin SOT23 package and is available with
optional lead-free finishing.
USB hubs
Electrical Schematic
R1
1
5
R2
R2
C1
C1
2
GND
3
4
R1
© 2004 California Micro Devices Corp. All rights reserved.
09/14/04 430 N. McCarthy Blvd., Milpitas, CA 95035-5112
▲
Tel: 408.263.3214
▲
Fax: 408.263.7846
▲
www.calmicro.com
1
PACUSB-D1/D2/D3
PACKAGE / PINOUT DIAGRAMS
Top View
Top View
1
2
3
5
1
2
3
5
D+ CNTR
GND
D+ CONN
D+ CNTR
GND
D+ CONN
D- CONN
4
4
D- CNTR
D- CNTR
D- CONN
5-pin SC70
5-pin SOT23
PACUSB-D1YB5/-D2YB5/-D3YB5
-D1YB5R/-D2YB5R/-D3YB5R
PACUSB-D1Y5/-D2Y5/-D3Y5
-D1Y5R/-D2Y5R/-D3Y5R
Note 1: The "n" shown in part markings above represents either the digit "1," "2," or "3."
Note 2: SOT23 and SC70 package sizes may differ. These drawings are not to scale.
PIN DESCRIPTIONS
PINS
NAME
D+ CNTR
GND
DESCRIPTION
1
2
3
4
5
D+ Data to the USB controller circuitry
Ground Pin
D- CNTR
D- CONN
D+ CONN
D- Data to the USB controller circuitry
D- Data to the USB connector
D+ Data to the USB connector
Ordering Information
PART NUMBERING INFORMATION
Standard Finish
Lead-free Finish
Ordering Part
Number1
Ordering Part
Number1
Pins
R1 Value
15 Ω
Package
Part Marking
UDF2
UDF3
UDF1
DF2
Part Marking
DF2R
DF3R
DF1R
F2R
5
SOT23-5
PACUSB-D2Y5
PACUSB-D3Y5
PACUSB-D1Y5
PACUSB-D2YB5
PACUSB-D3YB5
PACUSB-D1YB5
PACUSB-D2Y5R
PACUSB-D3Y5R
PACUSB-D1Y5R
PACUSB-D2YB5R
PACUSB-D3YB5R
PACUSB-D1YB5R
22 Ω
33 Ω
5
15 Ω
SC70-5
22 Ω
DF3
F3R
33 Ω
DF1
F1R
Note 1: Parts are shipped in Tape & Reel form unless otherwise specified.
© 2004 California Micro Devices Corp. All rights reserved.
2
430 N. McCarthy Blvd., Milpitas, CA 95035-5112
▲
Tel: 408.263.3214
▲
Fax: 408.263.7846
▲
www.calmicro.com
09/14/04
PACUSB-D1/D2/D3
Specifications
ABSOLUTE MAXIMUM RATINGS
PARAMETER
RATING
UNITS
°C
Storage Temperature Range
Power Dissipation per Resistor
Package Power Dissipation
Voltage on any pin (DC)
-65 to +150
100
200
6
mW
mW
V
STANDARD OPERATING CONDITIONS
PARAMETER
RATING
UNITS
Operating Temperature
-40 to +85
°C
© 2004 California Micro Devices Corp. All rights reserved.
09/14/04 430 N. McCarthy Blvd., Milpitas, CA 95035-5112 ▲ Tel: 408.263.3214
▲
Fax: 408.263.7846
▲
www.calmicro.com
3
PACUSB-D1/D2/D3
Specifications (cont’d)
ELECTRICAL OPERATING CHARACTERISTICS (SEE NOTE 1)
SYMBOL PARAMETER
CONDITIONS
MIN
TYP
MAX UNITS
R1
R1
R1
Resistance of R1 Resistor
(PACUSB-D2Y5/Y5R, -D2YB5/YB5R)
TA = 25°C
12
15
18
Ω
Resistance of R1 Resistor
(PACUSB-D3Y5/Y5R, -D3YB5/YB5R)
TA = 25°C
TA = 25°C
TA = 25°C
17.6
26.4
22
33
26.4
39.6
Ω
Resistance of R1 Resistor
(PACUSB-D1Y5/Y5R, -D1YB5/YB5R)
Ω
R2
Resistance of R2 Resistor
15
kΩ
TCR
Temperature Coefficient of Resistance Note 1
+1300
ppm/
°C
C1
Capacitance of C1 Capacitor
0 VDC; 30 mVAC; 1MHz; 25°C
2.5 VDC; 30 mVAC; 1MHz; 25°C
Matching Tolerance of C1 Capacitors 1MHz; 25°C
37.6
25.6
47
32
56.4
38.4
+2
pF
pF
%
TOLCM
ILEAK
VRB
Diode Leakage Current to GND
Diode Reverse Bias Voltage
Signal Voltage:
Measured at 3.3 VDC, 25°C
1
100
nA
ILOAD = 10μA; TA = 25°C
5.5
V
VSIG
ILOAD = 10mA; TA = 25°C
ILOAD = 10mA; TA = 25°C
Positive Clamp
Negative Clamp
5.6
-0.4
6.8
-0.8
9.0
-1.5
V
V
VESD
In-system ESD Withstand Voltage
MIL-STD-883D, Method 3015
(HBM)
Pins 1, 3; Notes 2,3 and 4
Pins 4, 5; Notes 2 and 3
+4
+20
kV
kV
IEC 61000-4-2 Contact Discharge Pins 4, 5; Notes 2 and 3
+15
kV
V
VCL
Clamping voltage under ESD
discharge
MIL-STD-883D, Method 3015
+8kV; Notes 2 and 5
12
-7
MIL-STD-883D, Method 3015 -
8kV; Notes 2 and 5
V
Note 1: Electrical operating characteristics guaranteed over standard operating conditions unless specified otherwise.
Note 2: Guaranteed by design and characterization.
Note 3: ESD voltage applied to pins with respect to GND, one at a time; unused pins are left open.
Note 4: Pins 1 and 3 are not connected to the USB port connector, and therefore are not exposed to external ESD hazards. Thus,
they do not require the high ESD protection levels provided for pins 4 and 5.
Note 5: ESD Clamping Voltage is measured at the opposite end of R1 from the pin to which the ESD discharge is applied (e.g., if
ESD is applied to pin 6, then the clamping voltage is measured at pin 1).
© 2004 California Micro Devices Corp. All rights reserved.
4
430 N. McCarthy Blvd., Milpitas, CA 95035-5112
▲
Tel: 408.263.3214
▲
Fax: 408.263.7846
▲
www.calmicro.com
09/14/04
PACUSB-D1/D2/D3
Performance Information
Capacitance vs. Voltage
The C1 capacitance value as a function of DC voltage
across it is presented in Figure 1. The curve is normal-
ized to a capacitance of 1.0 capacitance units at 2.5
VDC.
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
0
1
2
3
4
5
6
DC Voltage
Figure 1. Diode Capacitance vs. DC Voltage (Normalized)
Insertion Loss vs. Frequency Characteristics
Figure 2. Insertion Loss vs. Frequency Performance Curve, PACUSB-D1(SOT23-6)
© 2004 California Micro Devices Corp. All rights reserved.
09/14/04 430 N. McCarthy Blvd., Milpitas, CA 95035-5112 ▲ Tel: 408.263.3214
▲
Fax: 408.263.7846
▲
www.calmicro.com
5
PACUSB-D1/D2/D3
Performance Information (cont’d)
Figure 3. Insertion Loss vs. Frequency Performance Curve, PACUSB-D2(SOT23-6)
Figure 4. Insertion Loss vs. Frequency Performance Curve, PACUSB-D3(SOT23-6)
© 2004 California Micro Devices Corp. All rights reserved.
6
430 N. McCarthy Blvd., Milpitas, CA 95035-5112
▲
Tel: 408.263.3214
▲
Fax: 408.263.7846
▲
www.calmicro.com
09/14/04
PACUSB-D1/D2/D3
Application Information
The PACUSB-D1/D2/D3 provides a complete interface
for a single downstream USB port typically found in
computers and USB hubs. It integrates the series
resistors (R1) and the 15kΩ pull-down resistors (R2)
for both USB data lines (D+ and D-) as well as the
capacitors to ground for EMI suppression. Zener
diodes provide ESD protection up to 15kV contact dis-
charge per the IEC 61000-4-2 standard and protect the
USB controller on both data lines.
The PACUSB-D1/D2/D3 should be placed on the PCB
between the USB controller and the USB connector, as
shown on the Connection Diagram Figure 5.
PACUSB-DnY5/Y5R, -DnYB5/YB5R
R1
D+
D+
5
4
1
2
3
R2
C1
C1
DOWN-
USB
STREAM
USB
CONNECTOR
CONTROLLER
R2
D-
D-
R1
Figure 5. Connection Diagram for PACUSB-D1/D2/D3 Devices
To guarantee the best ESD and filtering performance,
it is recommended to physically locate the PACUSB-
D1/D2/D3 close to the USB connector. Also, the trace
lengths between the PACUSB-D1/D2/D3 and the USB
controller should be kept as short as possible.
© 2004 California Micro Devices Corp. All rights reserved.
09/14/04 430 N. McCarthy Blvd., Milpitas, CA 95035-5112 ▲ Tel: 408.263.3214
▲
Fax: 408.263.7846
▲
www.calmicro.com
7
PACUSB-D1/D2/D3
Mechanical Details
PACUSB-D1/D2/D3 devices are packaged in SOT23-5
and SC70-5 packages.
Mechanical Package Diagrams
SOT23-5 Mechanical Specifications:
Dimensions for PACUSB-D1/D2/D3 devices packaged
in a 5-pin SOT23 package are presented below.
TOP VIEW
e1
For complete information on the SOT23-5 package,
see the California Micro Devices SOT23 Package
Information document.
e
5
1
4
3
E1
E
2
PACKAGE DIMENSIONS
b
Package
Pins
SOT23-5 (JEDEC name is MO-178)
5
SIDE VIEW
Millimeters
Inches
Max
Dimensions
D
Min
Max
1.45
0.15
0.50
0.22
3.05
3.00
1.75
Min
--
A
A1
b
--
0.057
0.006
0.020
0.009
0.120
0.118
0.069
A
0.00
0.30
0.08
2.75
2.60
1.45
0.000
0.012
0.003
0.108
0.102
0.057
c
A1
D
END VIEW
E
E1
e
0.95 BSC
1.90 BSC
0.30 0.60
0.60 REF
3000 pieces*
0.0374 BSC
0.0748 BSC
0.0236 0.024
0.024 REF
c
e1
L
L1
L
L1
# per tape
and reel
Controlling dimension: millimeters
* This is an approximate amount which may vary.
Package Dimensions for SOT23-5.
© 2004 California Micro Devices Corp. All rights reserved.
8
430 N. McCarthy Blvd., Milpitas, CA 95035-5112
▲
Tel: 408.263.3214
▲
Fax: 408.263.7846
▲
www.calmicro.com
09/14/04
PACUSB-D1/D2/D3
Mechanical Details (continued)
SC70-5 Mechanical Specifications:
Mechanical Package Diagrams
Dimensions for PACUSB-D1/D2/D3 devices packaged
in a 5-pin SC70 package are presented below.
TOP VIEW
For complete information on the SC70-5 package, see
the California Micro Devices SC70 Package Informa-
tion document.
e
e
5
1
4
3
E
HE
2
PACKAGE DIMENSIONS
SC70-5
Package
B
(JEDEC name is MO-203 Issue A)
Pins
5
SIDE VIEW
Millimeters
Dimensions
Min
0.80
0.00
0.70
0.15
0.08
1.85
1.15
Max
1.10
0.10
1.00
0.30
0.25
2.25
1.35
D
A
A1
A2
A1
A
A2
B
c
D
END VIEW
E
e
0.65 BSC
HE
L
2.00
0.26
2.40
0.46
c
# / bag
1000 pieces*
3000 pieces*
L
# / tape and reel
Package Dimensions for SC70-5.
* This is an approximate amount which may vary.
© 2004 California Micro Devices Corp. All rights reserved.
09/14/04 430 N. McCarthy Blvd., Milpitas, CA 95035-5112 ▲ Tel: 408.263.3214
▲
Fax: 408.263.7846
▲
www.calmicro.com
9
相关型号:
©2020 ICPDF网 联系我们和版权申明