PACUSB-U1R [CALMIRCO]
Upstream USB Port Terminator; 上游USB端口终结者型号: | PACUSB-U1R |
厂家: | CALIFORNIA MICRO DEVICES CORP |
描述: | Upstream USB Port Terminator |
文件: | 总7页 (文件大小:118K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PACUSB-U1/U2/U3
Upstream USB Port Terminator
Product Description
Features
•
One upstream USB port terminator, EMI filter and
The PACUSB-U1, PACUSB-U2, and PACUSB-U3 are
single-channel USB upstream-port termination net-
works.
transient overvoltage protector in a single surface-
mount package
•
Compact SC70 or SOT23 package saves board
space and lowers manufacturing costs compared
to discrete solutions
ESD protection to 30kV contact discharge per
MIL-STD-883D, method 3015
ESD protection to 15kV contact discharge per
IEC 61000-4-2 international standard
Lead-free version available
The PACUSB-U1/U2/U3 integrate EMI/RFI filter com-
ponents R1 and C1, as recommended by the USB
specification. Because these are upstream USB
devices, they are terminated with a single 1.5kΩpull-up
•
•
•
resistor to V (R2).
3.3
There are three options for the value of the series
resistor R1:
•
•
•
For PACUSB-U1, R1=15Ω
For PACUSB-U2, R1=33Ω
For PACUSB-U3, R1=22Ω
Applications
This series resistance plus the USB driver output resis-
tance must be close to the USB cable’s characteristic
impedance of 45Ω (90Ω balanced) to minimize trans-
mission line reflections.
•
•
ESD protection and termination of USB port
All USB peripherals (PC printers, scanners,
zip drives, etc.)
•
•
•
•
•
PDAs / handheld PCs
Digital cameras
Wireless Handets
MP3 Players
Cable Modems
In addition, these parts provide a very high level of pro-
tection for sensitive electronic components that may be
subjected to electrostatic discharge (ESD). The input
and output pins are designed and characterized to dis-
sipate ESD strikes of 15kV safely, a level well beyond
the maximum requirements of the IEC 61000-4-2 inter-
national standard.
Using the MIL-STD-883D (Method 3015) specification
for Human Body Model (HBM) ESD, all pins are pro-
tected for contact discharges to greater than 30kV.
The PACUSB-U1/U2/U3 is housed in either a 6-pin
SC70 or 6-pin SOT23 package and is available with
optional lead-free finishing.
Electrical Schematic
1
R1
6
D1_c
D1_i
R2
C1
C1
i = input
c = connector
2
3
5
GND
V
3.3
R1
Tel: 408.263.3214
4
D2_c
D2_i
© 2006 California Micro Devices Corp. All rights reserved.
05/01/06
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
●
Fax: 408.263.7846
●
www.cmd.com
1
PACUSB-U1/U2/U3
PACKAGE / PINOUT DIAGRAMS
D1_i
GND
D2_i
1
2
3
6
5
4
D1_c
D1_i
GND
D2_i
1
2
3
6
5
4
D1_c
V
V
3.3
3.3
D2_c
D2_c
6-pin SC70
6-pin SOT23
Note: Drawings are not to scale.
PIN DESCRIPTIONS
PIN
NAME
DESCRIPTION
1
D1_i
The USB Controller side of the D+ or D- bidirectional transmission line of the differential
pair defined by USB standards.
2
3
GND
D2_i
The ground reference for the PACUSB-U1/U2/U3 device.
The USB Controller side of the D- or D+ bidirectional transmission line of the differential
pair defined by USB standards.
4
D2_c
The connector side of the D- or D+ bidirectional transmission line of the differential pair
defined by USB standards.
5
6
V3.3
The 3.3V supply voltage for the PACUSB-U1/U2/U3 device.
D1_c
The connector side of the D+ or D- bidirectional transmission line of the differential pair
defined by USB standards.
Ordering Information
PART NUMBERING INFORMATION
Standard FInish
Lead-free Finish
Ordering Part
Ordering Part
R1 Value (Ω)
Pins
Package
SC70-6
Number1
Part Marking
UU1
Number1
Part Marking
U1R
15
15
33
33
22
22
6
6
6
6
6
6
PACUSB-U1
PACUSB-U1Y6
PACUSB-U2
PACUSB-U2Y6
PACUSB-U3
PACUSB-U3Y6
PACUSB-U1R
PACUSB-U1Y6R
PACUSB-U2R
PACUSB-U2Y6R
PACUSB-U3R
PACUSB-U3Y6R
SOT23-6
SC70-6
UU1Y
UU2
U1YR
U2R
SOT23-6
SC70-6
UU2Y
UU3
U2YR
U3R
SOT23-6
UU3Y
U3YR
Note 1: Parts are shipped in Tape & Reel form unless otherwise specified.
© 2006 California Micro Devices Corp. All rights reserved.
2
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com 05/01/06
PACUSB-U1/U2/U3
Specifications
ABSOLUTE MAXIMUM RATINGS
PARAMETER
RATING
UNITS
V3.3 (Supply Voltage)
5.5
V
Operating Temperature Range
Storage Temperature Range
DC Power to Resistor
-40 to +85
-65 to +150
100
°C
°C
mW
mW
Package Power
200
STANDARD OPERATING CONDITIONS
PARAMETER
RATING
UNITS
V3.3 (Supply Voltage)
3.3
V
Ambient Operating Temperature
-40 to +85
°C
© 2006 California Micro Devices Corp. All rights reserved.
05/01/06
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com
3
PACUSB-U1/U2/U3
Specifications (con’t)
ELECTRICAL OPERATING CHARACTERISTICS
SYMBOL PARAMETER
CONDITIONS
MIN
TYP
MAX UNITS
R1
R1
R1
R2
C1
Resistance R1 (PACUSB-U1 only)
Measured at TA = 25°C
12
15
18
40
26
1.8
56
Ω
Ω
Resistance R1 (PACUSB-U2 only)
Resistance R1 (PACUSB-U3 only)
Resistance R2
Measured at TA = 25°C
Measured at TA = 25°C
Measured at TA = 25°C
26
18
1.2
38
33
22
1.5
47
Ω
kΩ
pF
Capacitance C1
Measured at 1 MHz, 2.5VDC,
TA =25°C
ILEAK
VD1
Diode Leakage Current to GND
At 3.3VDC and TA = 25°C
1
100
nA
V
Diode Reverse-biased Stand-off
Voltage
I = 10μA,TA = 25°C
5.5
VD2
Signal Clamp Voltage
Positive Clamp
@ 10mA, TA = 25°C
@ 10mA, TA = 25°C
5.6
-1.2
6.8
-0.8
8.0
-0.4
V
V
Negative Clamp
VESD
In-system ESD Withstand Voltage
Human Body Model, MIL-STD-883, Notes 1,2
Method 3015
kV
kV
kV
30
15
25
IEC 61000-4-2, contact discharge
method (I/O pins)
Notes 1,2
Notes 1,2
IEC 61000-4-2, contact discharge
method (V3.3 pin)
VCLAMP
Clamping Voltage during ESD
Discharge
MIL-STD-883, Method 3015, 8kV;
Notes 1,2
Positive
Negative
10
-5
V
V
Note 1: ESD applied to input/output/V3.3 pins with respect to GND, one at a time. Clamping voltage is measured at the opposite side
of the EMI filter to the ESD pin (i.e., if ESD is applied to pin 1, then clamping voltage is measured at pin 6). Unused pins are
open.
Note 2: These parameters guaranteed by design.
© 2006 California Micro Devices Corp. All rights reserved.
4
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com 05/01/06
PACUSB-U1/U2/U3
Application Information
The PACUSB-U1/U2/U3 is targeted for upstream USB
ports (peripherals). It provides series termination, EMI
filtering, and ESD protection for the two USB data lines
D+ and D-.
Connections for Full Speed Operation
Full Speed devices have the pull-up resistor (R2) con-
nected to the D+ data line, as shown in Figure 1. Pin1
is tied to the D+ line of the USB controller. Pin 6 is con-
nected to the D+ line on the USB connector.
The USB Specification revision 1.1 provides for two
data rates:
•
The Full Speed signaling bit rate at 12 Mbits per
second, and
Connections for Low Speed Operation
Low Speed devices have the pull-up resistor (R2) con-
nected to the D- data line, as shown in Figure 2. Pin 1
is tied to the D- line of the USB controller; pin 6 is con-
nected to the D- line on the USB connector.
•
The Low Speed signaling bit rate at 1.5 Mbits per
second.
The speed is selected by connecting one of the data
lines (D+ or D-) to a 3.3V supply voltage via a 1.5kΩ
pull-up resistor (R2).
PACUSB-Ux
1
R1
6
D+
D+
D1_i
D1_c
R2
C1
C1
3.3V
2
5
USB
USB
CONTROLLER
CONNECTOR
GND
V
3.3
GND
3
R1
4
D-
D-
D2_i
D2_c
Figure 1. Full Speed Connection
PACUSB-Ux
1
R1
6
D-
D-
D1_i
D1_c
R2
C1
C1
3.3V
2
5
USB
USB
CONTROLLER
CONNECTOR
GND
V3.3
GND
D+
3
R1
4
D+
D2_i
D2_c
Figure 2. Low Speed Connection
© 2006 California Micro Devices Corp. All rights reserved.
05/01/06
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com
5
PACUSB-U1/U2/U3
Mechanical Details
PACUSB-U1/U2/U3 devices are available in 6-pin
SC70 and 6-pin SOT23 packages.
Mechanical Package Diagrams
SC70 Mechanical Specifications
TOP VIEW
Dimensions for the PACUSB-U1/U2/U3 supplied in a
SC70-6 package are presented below.
e
e
6
5
2
4
3
For complete information on the SC70, see the Califor-
nia Micro Devices SC70 Package Information docu-
ment.
Pin 1
Marking
E HE
1
B
PACKAGE DIMENSIONS
Package
Pins
MO-203 Issue A
6
SIDE VIEW
D
Millimeters
Dimensions
Min
Max
1.10
0.10
1.00
0.30
0.25
2.25
1.35
A2 A
A1
A
A1
A2
B
0.80
0.00
0.70
0.15
0.08
1.85
1.15
END VIEW
c
D
E
c
e
0.65 BSC
3000 pcs
HE
L
2.00
0.26
2.40
0.46
L
# per
tape and reel
Package Dimensions for SC70-6.
© 2006 California Micro Devices Corp. All rights reserved.
6
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com 05/01/06
PACUSB-U1/U2/U3
Mechanical Details (continued)
SOT23 Mechanical Specifications
Mechanical Package Diagrams
Dimensions for the PACUSB-U1/U2/U3 supplied in a
SOT23-6 package are presented below.
TOP VIEW
For complete information on the SOT23 , see the Cali-
fornia Micro Devices SOT23 Package Information doc-
ument.
e1
e
6
1
5
4
3
Pin 1
Marking
E1
E
PACKAGE DIMENSIONS
2
Package
Pins
MO-178
6
b
Millimeters
Min Max
Inches
Max
Dimensions
SIDE VIEW
D
Min
--
A
A1
b
--
1.45
0.15
0.50
0.22
3.05
3.00
1.75
0.057
0.006
0.020
0.009
0.120
0.118
0.069
0.00
0.30
0.08
2.75
2.60
1.45
0.000
0.012
0.003
0.108
0.102
0.057
A
c
D
E
A1
E1
e
END VIEW
0.95 BSC
0.0374 BSC
e1
L
1.90 BSC
0.60 REF
0.0748 BSC
0.0236 REF
c
# per tape
and reel
3000 pcs
L1
L
Controlling dimension: inches
Package Dimensions for SOT23-6.
© 2006 California Micro Devices Corp. All rights reserved.
05/01/06
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com
7
相关型号:
©2020 ICPDF网 联系我们和版权申明