HPR102 [CANDD]
SERIES DC/DC CONVERTER; 系列DC / DC转换器
| 型号： | HPR102 |
| 厂家： | 
C&D TECHNOLOGIES |
| 描述： | SERIES DC/DC CONVERTER |
| 文件： | 总4页 (文件大小：61K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HPR1XX
POWER: 0.75 Watt
POWER ELECTRONICS DIVISION
SERIES DC/DC CONVERTER
Product Site: www.cdpowerelectronics.com
Corporate Site: www.cdtechno.com
OUTPUT: Single Output
SIZE: Multiple Package Styles
PRODUCT DATA SHEET
FEATURES
G Low Cost
G High Output Power Density:
10 Watts/Inch3
G Multiple Package Styles
G Internal Input and Output
G Filtering
G Extended Temperature Range:
-25°C to +85°C
G Efficiencies to 79%
G Non-Conductive Case
The HPR1XX Series uses advanced circuit design and packag-
ing technology to deliver superior reliability and performance.
A 170kHz push-pull oscillator is used in the input stage. Beat-
frequency oscillation problems are reduced when using the
HPR1XX Series with high frequency isolation amplifiers.
efficiency of the HPR1XX Series means the series is able to offer
greater than 10 W/inch3 of output power density. Operation
down to no load will not impact the reliability of the series,
although a >1mA minimum load is needed to realize published
specifications.
Reduced parts count and high efficiency add to the reliability of
the HPR1XX Series. The high efficiency of the HPR1XX Series
means less internal power dissipation, as low as 190mW. With
reduced heat dissipation the HPR1XX Series can operate at
higher temperatures with no degradation. In addition, the high
The HPR1XX Series provides the user a low cost converter
without sacrificing reliability. The use of surface mounted
devices and advanced manufacturing technologies make it pos-
sible to offer premium performance and low cost.
Ordering Information
Absolute Maximum Ratings
InternalPowerDissipation .......................................... 450mW
ShortCircuitDuration .................................................. Momentary
LeadTemperature(soldering, 10secondsmax ........... .+300°C *
HPR 1XX V/W
Device Family
HPRIndicatesDC/DCConverter
ModelNumber
* NOTE: Refer to Reflow Profile for SMD Models.
SelectedfromTableofElectricalCharacteristics
PackageOption
There is "no" package designator for the SIP package
V = DIP Package
W = SMD Package
C&D Technologies (Power Electronics) Ltd.
Shannon, Co. Clare, Ireland
Tel: +353.61.474.133 Fax:+353.61.474.141
Power Electronics Division, United States
3400 E Britannia Drive, Tucson, Arizona 85706
Tel: 800.547.2537 Fax: 520.770.9369
C&D Technologies, (NCL)
Milton Keynes MK14 5BU UK
Tel: +44 (0)1908 615232 Fax: +44 (0)1908 617545
Any data, prices, descriptions or specifications presented herein are subject to revision by C&D Technologies, Inc. without notice. While such information is believed to
be accurate as indicated herein, C&D Technologies, Inc. makes no warranty and hereby disclaims all warranties, express or implied, with regard to the accuracy or
completeness of such information. Further, because the product(s) featured herein may be used under conditions beyond its control, C&D Technologies, Inc. hereby
disclaims all warranties, either express or implied, concerning the fitness or suitability of such product(s) for any particular use or in any specific application or arising from
any course of dealing or usage of trade. The user is solely responsible for determining the suitability of the product(s) featured herein for user’s intended purpose and
in user’s specific application. C&D Technologies, Inc. does not warrant or recommend that any of its products be used in any life support or aviation or aerospace
applications.
HPR1XX REV K 8/01
Page 1
ELECTRICAL SPECIFICATIONS
Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified.
NOMINAL
INPUT
VOLTAGE
(VDC)
RATED
OUTPUT
VOLTAGE
(VDC)
RATED
OUTPUT
CURRENT
(mA)
INPUT CURRENT
REFLECTED
RIPPLE
CURRENT
(mAp-p)
NO LOAD RATED LOAD
EFFICIENCY
(%)
MODEL
(mA)
(mA)
HPR100
HPR101
HPR102
HPR103
HPR104
HPR105
5
5
5
5
5
5
5
12
15
±5
±12
±15
150
62
50
±75
±30
±25
20
20
20
20
20
20
216
212
212
218
212
200
10
5
5
5
5
69
70
71
68
68
75
5
HPR106
HPR107
HPR108
HPR109
HPR110
HPR111
12
12
12
12
12
12
5
12
15
±5
±12
±15
150
62
50
±75
±30
±25
10
10
10
10
10
10
90
81
81
88
81
81
5
5
5
5
5
5
69
77
77
71
74
77
HPR112
HPR113
HPR114
HPR115
HPR116
HPR117
15
15
15
15
15
15
5
12
15
±5
±12
±15
150
62
50
±75
±30
±25
8
8
8
8
8
8
72
72
72
72
63
63
5
5
5
5
5
5
69
69
69
69
76
79
HPR118
HPR119
HPR120
HPR121
HPR122
HPR123
24
24
24
24
24
24
5
12
15
±5
±12
±15
150
62
50
±75
±30
±25
8
8
8
8
8
8
48
48
45
45
45
45
15
15
15
15
15
15
65
65
69
69
67
69
Note: Other input to output voltages may be available. Please contact factory.
COMMON SPECIFICATIONS
Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified.
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
INPUT
Voltage Range
4.5
10.8
13.5
21.6
5
5.5
VDC
VDC
VDC
VDC
12
15
24
13.2
16.5
26.4
Voltage Rise Time
See Typical Performance Curves & Application Notes: "Capacitive Loading Effects on Start-Up of DC/DC Converters"
ISOLATION
RatedVoltage
TestVoltage
Resistance
Capacitance
LeakageCurrent
750
750
VDC
Vrms(1060pk)
GΩ
60 Hz, 10 Seconds
10
25
2
100
8.5
pF
µArms
VISO=240VAC,60Hz
OUTPUT
RatedPower
VoltageSetpointAccuracy
Ripple & Noise
750
mW
%
mVp-p
mVrms
mVp-p
RatedLoad, NominalVIN
BW = DC to 10MHz
BW =10Hz to 2MHz
BW = DC to 10MHz
±5
45
30
90
HPR103
Voltage (Over Input Voltage Range)
1mA Load, VOUT = 5V
1mA Load, VOUT = 12V
1mA Load, VOUT = 15V
7
15
18
VDC
VDC
VDC
%/°C
TemperatureCoefficent
.01
1
REGULATION
LineRegulation
High Line to Low Line
%/%Vin
GENERAL
SwitchingFrequency
Frequency Change
PackageWeight
170
24
2
kHz
%
g
OverLineandLoad
MTTF per MIL-HDBK-217, Rev. E*
GroundBenign
FixedGround
NavalSheltered
AirborneUninhabitedFighter
CircuitStressMethod
TA=+25°C
7.9
1.9
1.2
MHr
MHr
MHr
kHr
TA=+35°C
TA=+35°C
TA=+35°C
300
TEMPERATURE
Specification
Operation
-25
-40
-40
+25
+85
+100
+110
°C
°C
°C
Storage
*FordemonstratedMTTFresultsreference PowerConvertiblesReliabilityReportHPR105
Page 2
HPR1XX REV K 8/01
"SIP" Package/Pinout
MECHANICAL
0.240 +0.010”
(6.09 +0.25)
Notes:
0.77 +0.010”
(19.56 +0.25)
All dimensions are in inches (millimeters).
GRID: 0.100 inches (2.54 millimeters)
PIN PLACEMENT TOLERANCE: ± 0.015"
RIGHT
SIDE
FRONT
VIEW
0.400 +0.010”
(10.16 +0.25)
VIEW
*Common pin not present on single output models.
0.020 +0.010”
(0.51 +0.25)
1
2
4
*5
6
PIN CONNECTIONS
0.140”
0.01 +0.002”
(0.25 +0.05)
MIN
1. +VIN
2. -VIN
(3.56)
0.02 +0.002”
(0.51 +0.05)
0.18 +0.015”
(4.57 +0.38)
0.035 +0.015”
(0.89 +0.38)
4. -VOUT 5. COM*
6. +VOUT
BOTTOM
VIEW
Package/Pinout "V" and "W"
MECHANICAL
DIP PACKAGE
SMD PACKAGE
0.785±0.010"
(19.94±0.25)
0.785±0.010"
(19.94±0.25)
1413 1110 9
8
1413 1110 9 8
0.695±0.015"
(17.65±0.38)
0.695±0.015"
(17.65±0.38)
0.525±0.010"
(13.34±0.25)
0.525±0.010"
(13.34±0.25)
TOP VIEWS
HPR1XXV
HPR1XXW
1
2 3 4 5 6 7
1
2 3 4 5 6 7
0.375±0.005"
(9.52±0.13)
SIDE VIEWS
0.375±0.005"
(9.52±0.13)
0.015±0.005"
(0.38±0.13)
0.015±0.005"
(0.38±0.13)
0.020±0.002"
(0.51±0.05)
0.020±0.002"
(0.51±0.05)
0.100±0.010"
(2.54±0.25)
0.100±0.010"
(2.54±0.25)
END VIEWS
0.125+0.030"
-0.000"
(3.18+0.76)
0°-15°
0.014±0.002"
(0.36±0.05)
.015±.010"
(.38±.26)
0.600"
(15.24)
(
-0.00)
PIN CONNECTIONS
PIN# SINGLES DUALS
1
2
3
4
5
6
7
+VIN
-VIN
NC
NC
-VOUT
NC
+VIN
-VIN
NC
NOTES:
NC
NC = Do Not Connect.
-VOUT
Common
+VOUT
Duplicate pin functions are internally connected.
All dimensions are in inches (millimeters).
GRID: 0.100 inches (2.54 millimeters)
+VOUT
8
9
10
11
NC
NC
NC
NC
NC
NC
NC
NC
13
14
NC
NC
NC
NC
RECOMMENDED LAND PATTERN
RECOMMENDED REFLOW PROFILE
30 sec MAX
(>220°C)
0.100"
(2.54)
250
235 °C MAX
220
1413 1110 9
8
200
150
100
50
190
0.080"
(2.03)
0.730"
(18.54)
0.040"
(1.02)
90 sec MAX
(>190°C)
1
2 3 4 5 6 7
0.650"
(16.51)
TIME (seconds)
HPR1XX REV K 8/01
Page 3
TYPICAL PERFORMANCE CURVES
Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified.
VOUT VS LOAD
(5Vout Models)
VOUT VS LOAD
(±5Vout Models)
VOUT VS LOAD
(12Vout Models)
12.5
12.4
5.7
5.4
5.2
5.0
5.5
5.3
12.3
12.2
12.1
4.8
4.6
5.1
4.9
12.0
11.9
80
0
40
120
160
0
20
40
60
80
80
90
0
20
40
60
80
Output Current (mA)
Output Current each load (mA)
Output Current each load (mA)
VOUT VS LOAD
(±12Vout Models)
VOUT VS LOAD
(15Vout Models)
VOUT VS LOAD
(±15Vout Models)
16.5
16.0
12.6
12.5
15.9
15.7
15.5
15.3
12.4
12.3
12.2
15.5
15.0
14.5
15.1
14.9
12.1
12.0
14.0
13.5
0.2
0.4
0.6
0.8
1.0
0
10
20
30
40
0
20
40
60
0
Output Current each load (mA)
Output Current each load (mA)
Output Power each load (Watts)
OSCILLATION FREQUENCY VS
TEMPERATURE
EFFICIENCY VS LOAD
90
75
220
200
180
160
60
45
30
15
0
140
60
20
40
80
-30
0
30
60
0
100
% of Rated Load (%)
Temperature (°C)
SAFE OPERATING AREA
LOAD CAPACITANCE vs INPUT RISE TIME
LOAD CAPACITANCE vs INPUT RISE TIME
(15 Vout models)
(5 Vout models)
600
60
50
40
30
20
10
0
500
400
300
SAFE OPERATING AREA
SAFE OPERATING AREA
200
100
0
0
5
10
15
20
25
30
35
40
45
50
0
5
10
15
20
25
30
Rise Time of Input Voltage (mS)
35
40
45
50
Rise Time of Input Voltage (mS)
LOAD CAPACITANCE vs INPUT RISE TIME
(12 Vout models)
NOTES:
90
1.) When operated within the SAFE OPERATING AREA as defined
by the above curves, the output voltage of HPR1XX devices is
guaranteed to be within 95% of its steady-state value within 100
milliseconds after the input voltage has reached 95% of its steady-
state value.
80
70
60
50
40
30
20
SAFE OPERATING AREA
2.) For dual output models, total load capacitance is the sum of the
capacitances on the plus and minus outputs.
10
0
0
5
10
15
20
25
30
35
40
45
50
Rise Time of Input Voltage (mS)
Page 4
HPR1XX REV K 8/01
16
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明