TPS_TX1000 [CANDD]
1000 Watt, Single Output, AC/DC Power Supply; 1000瓦,单路输出, AC / DC电源供应器型号: | TPS_TX1000 |
厂家: | C&D TECHNOLOGIES |
描述: | 1000 Watt, Single Output, AC/DC Power Supply |
文件: | 总4页 (文件大小:367K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Corporate: www.cdtechno.com
Product: www.cdpoweronline.com
TX1000
1000 Watt, Single Output, AC/DC Power Supply
ꢀ Self-Cooled 5”x 4.88”x 12” Chassis
ꢀ Harmonic Correction to
EN61000-3-2
ꢀ 70-80% Efficiency
ꢀ Wide Range Input of 90-264VAC
ꢀ Optional ORing Diode
ꢀ UL/CUL 1950, VDE EN60950
ꢀ CE Marked
ꢀ FCC / CISPR 22 ClassA EMI
Filtering
ꢀ Typical Power Factor of 0.99
ꢀ Active Current Sharing
ꢀ EN61000-4 Immunity
e TX100 Series of single-outpu
1kW power supplies are fully featured
for usage worldwide. With active
Power Factor Correction (PFC) to
EN61000-3-2, wide-range input of 90-
264VAC, EMI compliance to FCC and
IS22, “CE” Mark, and immunity
to EN61000-4, the TX1000 series is
ready for global deployment. Standard
features include remote sense
adjustment, active current sharing,
remote inhibit, power fail warning, DC
OK signal, and thermal shutdown. A
complete array of output voltages from
2.5 to 48VDC is available. The self-
cooled 5” x 4.88” x 12” chassis provides
industry-standard modularity that
permits optimum flexibility in
installation. An optional ORing diode is
offered on all models greater than 5VDC
models.
compensation, output voltage
PRODUCTSELECTIONCHART
MODEL
OUTPUT VOLTAGE
OUTPUT CURRENT
TX10005AASLPLNH
TX10005BASLPLNH(1)
TX10005CASLPLNH(1)
TX10005DASLPLNH(1)
TX10005EASLPLNH(1)
TX10005FASLPLNH(1)
TX10005GASLPLNH(1)
TX10005HASLPLNH(1)
TX10005JASLPLNH(1)
TXD10005KASLPLNH(1)
TXD10005LASLPLNH(1)
5.0
12.0
15.0
18.0
24.0
28.0
36.0
48.0
20.0
3.3
200A
84A
67A
56A
42A
36A
28A
21A
50A
182A
200A
2.5
Notes: (1) Model specified without optional ORing diode; to specify the diode option, replace the letter “N”
with the letter “D”, no O-Ring diode on 5V models.
TX1000 Rev D 1/2003
INPUT SPECIFICATIONS
PARAMETERS
Operating Range
Input Current
CONDITIONS
47-63Hz
MIN
TYP
MAX
264
12
80
160
80
UNITS
VAC
A
Apk
Apk
%
90
Nominal line, full load
120VAC, 250C, cold start
240VAC, 250C, cold start
Nominal line, full load
Full load
Inrush Current
Efficiency
Holdup
Power Factor
70
20
75
msec
(1)
Full load
0.99
Notes: (1) Harmonic currents meet EN61000-3-2
OUTPUT SPECIFICATIONS
PARAMETERS
Output Power
Voltage Adjustment Range
Output Regulation
Minimum Load
CONDITIONS
MIN
TYP
MAX
1000
UNITS
Watts
%
All environmental and line conditions
Relative to nominal output voltage
Line and load (each)
+0.2
1
%
Amps
% pk-pk
%/0C
PARD
Measured at output terminals, 20MHz
00 to 500C
Temperature Coefficient
TIONS
PARAMETERS
Ambient Temperature
(Operating)
Ambient Temperature
Altitude (Operating)
Altitude (Non-operating)
Shock
MIN
TYP
MAX
UNITS
Output de-rated linearly to 50% of
rated capacity between 500C and 700C
Non-operating
0
0
+70
+85
+10,000
+50,000
C
0
-50
-200
-200
C
Feet
Feet
Per MIL-STD-810D, Method 516.3, Procedure II, in each axis, including NTSA drop test
Per MIL-STD-810D, Method 514.3, Procedure II, in each axis, including NTSA drop test
The TX1000 is provided with an internal cooling fan.
Vibration
Cooling
2
Product: www.cdpoweronline.com
TX1000 Rev D 1/2003
PRODUCT FEATURES
FEATURES
CHARACTERISTIC
Remote Sense
Active Current Sharing
ORing Diode
500mV compensation
Single Wire; 5% tolerance if outputs are over 25% of rated load
Optional on all models (not available on 5V model)
125% of nominal (+7.5%)
OVP
Thermal Shutdown
DC OK Signal
Power Fail Warning Signal
Remote Inhibit
Automatic Restart
Logic “1” when output is within +3% of nominal
Transition to Logic “0” at least 5msec before loss of output regulation
Logic “0” applied will inhibit output (referenced to –Sense terminal)
PRODUCT COMPLIANCES
APPROVAL
UL and cUL
VDE
CHARACTERISTIC
UL1950, 3rd Edition (1)
EN60950
FCC
CISPR 22
Class A requirements for conducted emissions
Class A requirements for conducted emissions
Harmonic Currents, Class A
Electrostatic Discharge, Level 4
Radiated Immunity, Level 2
Electrical Fast Transients, Level 3
Input Surge Immunity, Level 3
Conducted Immunity, Level
Magnetic Field Immunity, Level 2
age Directive
EN61000-3-2
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
CE Mark
Notes: (1) UL1950, 3rd Edition incorporates the requirements of CSA 1950.
ORMATION
MODEL DESIGNATION
TX1000
BASE MODEL
Chassis: “5” = 5” x 4.88” x 12”; “M” = modified
Output Voltage: See Chart below
Input Filter: “A” designates Class A EMI filter
Fan: “S” designates Standard Fan
Remote Inhibit: “L” designates that Logic “0” applied inhibits output
“P” designates Active Input Power Factor Correction with widerange input voltage of 90-264 VAC
Power Fail Warning: “L” designates transition to Logic “0” upon loss of AC
Output ORing diode: “N” = None; “D” = Diode Option
DC OK: “H” designates that Logic “1” indicates a DC OK condition
OUTPUT VOLTAGES
A=5V
G = 36V
H = 48V
J = 20V
K = 3.3V
L = 2.5V
B = 12V
C = 15V
D = 18V
E = 24V
F = 28V
3
Product: www.cdpoweronline.com
TX1000 Rev D 1/2003
MECHANICAL
1 0
9
1
2
J1 CONNECTOR
AMP NO. 87579-2 OR EQUIVALENT
PIN FUNCTION
NO.
1
2
REMOTEINHIBIT
DC OK
3
N/C
4
N/C
5
6
7
8
POWER FAIL
CURRENTSHARE
+ SENSE
N/C
_
9
SENSE
10
N/C
Power Electronics Division, Americas
3400 E Britannia Drive, Tucson, Arizona 85706
Tel: 800.547.2537 Fax: 520.295.4197
C&D Technologies, EMEA/AP
Milton Keynes MK14 5BU UK
Tel: +44 (0)1908 615232 Fax: +44 (0)1908 617545
Any data, prices, descriptions or specifications presented herein are subject to revision by C&D Technologies, Inc. without notice. While such information is believed to
be accurate as indicated herein, C&D Technologies, Inc. makes no warranty and hereby disclaims all warranties, express or implied, with regard to the accuracy or
completeness of such information. Further, because the product(s) featured herein may be used under conditions beyond its control, C&D Technologies, Inc. hereby
disclaims all warranties, either express or implied, concerning the fitness or suitability of such product(s) for any particular use or in any specific application or arising
from any course of dealing or usage of trade. The user is solely responsible for determining the suitability of the product(s) featured herein for user’s intended purpose
and in user’s specific application. C&D Technologies, Inc. does not warrant or recommend that any of its products be used in any life support or aviation or aerospace
applications.
4
Product: www.cdpoweronline.com
TX1000 Rev D 1/2003
相关型号:
©2020 ICPDF网 联系我们和版权申明