UA18CAD09NKM1TI [CARLOGAVAZZI]

Ultrasonic Diffuse, Analogue and Digital Output Types UA18CAD......TI;


型号：	UA18CAD09NKM1TI
厂家：	Carlo Gavazzi
描述：	Ultrasonic Diffuse, Analogue and Digital Output Types UA18CAD......TI
文件：	总4页 (文件大小：498K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Ultrasonic

Diffuse, Analogue and Digital Output

Types UA18CAD......TI

• Cylindrical M18 PBT housing

• Sensing distance: 50-2200 mm

• Power supply: 15 to 30 VDC

• Outputs: 0-10 VDC or 4-20 mA and one switching

output NPN or PNP, NO or NC.

• Linearity error 1%

• Repeatability 0.5%

• Beam angle. ±±7 or ±87

• Protection: Short-circuit, reverse polarity and

overvoltage

• Protection degree IP 6±

• 2 m cable or M12 plug

Product Description

Ordering Key

UA18CAD04NGM1TI

A family of diffuse ultrasonic

sensors with sensing range

from 50-400 mm, 100-900

mm and 200-2200 with a

resolution as low as 1.0 mm.

The sensor contains both an

analogue and a digital output.

The output is either 0-10V

or 4-20 mA and the digit-

al output NPN or PNP, NO

or NC which forms a win-

dow detection. The sensor is Ultrasonic sensor

the ideal choice for distance Housing style

measurement, level measure- Housing size

ment, diameter measurement Housing material

or loop control.

Housing length

Due to use of microproces- Detection principle

sor control the digital filtering Sensing distance

makes the sensor immune to Output type

most electromagnetic inter- Output configuration

ferences.

Connection

Teach-in

Type Selection

Housing

diameter

Connec-

tion

Rated operating

dist. (S_n)

Analog

Output

Digital output

NPN/PNP

Ordering no.

M18

Plug M12

Cable

Plug M12

Cable

Plug M12

Cable

Plug M12

Cable

Plug M12

Cable

Plug M12

Cable

Plug M12

Cable

Plug M12

Cable

Plug M12

Cable

Plug M12

Cable

Plug M12

Cable

Plug M12

Cable

50-400 mm

100-900 mm

200-2200 mm

4-20 mA

0-10 V

NPN

PNP

NPN

PNP

NPN

PNP

UA 18 CAD 04 NG M1 TI

UA 18 CAD 04 NG TI

UA 18 CAD 04 NK M1 TI

UA 18 CAD 04 NK TI

UA 18 CAD 04 PG M1 TI

UA 18 CAD 04 PG TI

UA 18 CAD 04 PK M1 TI

UA 18 CAD 04 PK TI

UA 18 CAD 09 NG M1 TI

UA 18 CAD 09 NG TI

UA 18 CAD 09 NK M1 TI

UA 18 CAD 09 NK TI

UA 18 CAD 09 PG M1 TI

UA 18 CAD 09 PG TI

UA 18 CAD 09 PK M1 TI

UA 18 CAD 09 PK TI

UA 18 CAD 22 NG M1 TI

UA 18 CAD 22 NG TI

UA 18 CAD 22 NK M1 TI

UA 18 CAD 22 NK TI

UA 18 CAD 22 PG M1 TI

UA 18 CAD 22 PG TI

UA 18 CAD 22 PK M1 TI

UA 18 CAD 22 PK TI

0-10 V

4-20 mA

0-10 V

4-20 mA

0-10 V

4-20 mA

0-10 V

4-20 mA

0-10 V

4-20 mA

0-10 V

Specifications are subject to change without notice (12.05.2014)

UA18CAD..

Specifications

Rated operating distance (S_n) Reference target: 1 mm

metal rolled finish.

Operating frequency digital

output (f)

CAD04: 100 x 100 mm

CAD09 and CAD22:

200 x 200 mm

UA18CAD04...

≤ 10 Hz

≤ 4 Hz

≤ 1 Hz

UA18CAD09...

UA18CAD22...

UA18CAD04

UA18CAD09

UA18CAD22

50 - 400 mm

100 - 900 mm

200 - 2200 mm

Response time OFF-ON

digital output (t

UA18CAD04...^ON

UA18CAD09...

UA18CAD22...

)

≤ 50 mS

≤ 125 mS

≤ 500 mS

Blind zone

UA18CAD04...

UA18CAD09...

UA18CAD22...

≤ 50 mm

≤ 100 mm

≤ 200 mm

Response time ON-OFF

digital output (t

UA18CAD04...^OFF

UA18CAD09...

UA18CAD22...

)

Repeatability

Linear Accuracy

Beam angle

UA18CAD04...

UA18CAD09...

UA18CAD22...

0.5%

≤ 50 mS

≤ 125 mS

≤ 500 mS

Response time analog output ≤ 500 mS

Power ON delay

Output function, open

collector

By sensor type

±8ꢀ

±±ꢀ

≤ 500 mS

Sensitivity

Push-button

P1 (farthest setpoint)

P2 (nearest setpoint)

1 mm

NPN or PNP

Output switching function

One open collector transis-

tor and one analogue

Resolution

Temperature drift

Temperature compensation Yes

Hysteresis (H)

Rated operational voltage (U_B) 15 to 30 VDC

0.1%/ꢀC @ -20ꢀ to +60ꢀ C

output to be configured as:

Window function with N.O

or N.C. output.

Analogue output with posi-

tive or negative slope.

Min. 1%

(ripple included)

Indication Output ON

Environment

Installation category

Yellow LED

Ripple (U_rpp

)

≤ 5%

No-load supply current (I_o)

UA18CAD04...

UA18CAD09...

lll (IEC 60664/60664A;

6094±-1)

3 (IEC 60664/60664A;

6094±-1)

45 mA @ U max

45 mA @ U^Bmax

50 mA @ U_B^Bmax

Pollution degree

UA18CAD22...

Degree of protection

IP6± (IEC 60529; 6094±-1)

Output current continuous

digital output (I_e)

Max. load capacity 100 nF

UL508 specification

Ambient temperature

Operating

Storage

500 mA

100 mA

-20° to +60°C (-4° to +140°F)

-35° to +±0°C (-31° to +158°F)

Output current short-time

digital output (I)

Max. load capacity 100 nF

UL508 specification

Vibration

10 to 55 Hz, 1.0 mm/6g

(IEC/EN 60068-2-6)

500 mA

100 mA

Shock

30 g / 11 mS, 3 directions

(IEC/EN 60068-2-2±)

Minimum operational current

digital output (I_m)

OFF-state current digital

output (I_r)

Voltage drop digital output (U_d) ≤ 2.2 VDC @ I_emax.

Protection digital output

Rated insulation voltage

Housing

Material body

< 500 VAC (rms)

0.5 mA

PBT

10 μA

Material front

Epoxy-glass resin

Grilamid

POM

Material back, plug

Material back, cable

Material trimmer

Sealing around trimmer

Material sealing front

UA18CAD04...

UA18CAD09...

UA18CAD22...

Short-circuit, overvoltage

and reverse polarity

TPE

Output analog output

NG.. or PG.. types

NK.. or PK.. types

4 to 20 mA

0 to 10 VDC

TPE

PBT

Load

4 to 20 mA

0 to 10 VDC

max. 500 Ω

min. 3 kΩ

Connection

Cable

PVC, grey, 2 m,

4 x 0.32 mm², Ø = 4.± mm

M12, 4-pin (CON. 14-series)

Carrier frequency

UA18CAD04...

UA18CAD09...

UA18CAD22...

400 kHz

300 kHz

200 kHz

Plug

Tightening torque

≤ 1 Nm

Specifications are subject to change without notice (12.05.2014)

UA18CAD..

Specifications (cont.)

Weight

Cable version

Plug version

CE-marking

Approvals

Yes

98 g

35 g

cULus (UL508)

Wiring Diagram

Detection Range

Target

Sensor

BN1

WH2

BN1

WH2

Distance (Inches)

7,9 11,8

3,9

15,7

19,7

100,0

80,0

60,0

3,9

3,1

BK4

PNP:

Target 100 x 100 mm

2,4

BU3

40,0

20,0

1,6

0,8

Target Ø 25 mm

Voltage

Current

0,0

-20,0

-40,0

-60,0

-80,0

-100,0

-0,8

-1,6

-2,4

-3,1

-3,9

BN1

BK4

NPN:

WH2

100

200

300

400

500

BU3

Distance (mm)

UA 18 CAD 04 ...

Target

Sensor

Distance (Inches)

Dimensions

0,0

7,9

15,7

23,6

31,5

39,4

7,9

200,0

150,0

100,0

50,0

5,9

8.3

Target 200 x 200 mm

Target Ø 25 mm

Teach

3,9

12.4

2,0

0,0

-2,0

-3,9

-5,9

-7,9

-50,0

-100,0

-150,0

-200,0

LED indication

1÷2.5

63.5

17.6

83.6÷85.1

200

400

600

800

1.000

Cable

Distance (mm)

UA 18 CAD 09 ...

8.3

Teach

LED indication

12.6

Target

Sensor

Distance (Feet)

0,0

1,2

2,4

3,6

4,8

6,0

7,2

250,0

200,0

150,0

100,0

50,0

9,8

7,9

5,9

3,9

Target 200 x 200 mm

1÷2.5

57.5

17.6

Target Ø 25 mm

2,0

77.7÷79.2

0,0

PLUG

-50,0

-100,0

-150,0

-200,0

-250,0

-2,0

-3,9

-5,9

-7,9

-9,8

400

800

1.200

1.600

2.000

2.400

Distance (mm)

UA 18 CAD 22 ...

Specifications are subject to change without notice (12.05.2014)

Programming setup

General set up of sensing point P1 (longest distance) and P2 (shortest distance) independently of the sensor type

or function.

1) Mount the sensor in the selected application.

2) Place a target in front of the sensor at the maximum required distance (P1), then press shortly on the teach-button.

The yellow LED switches Off and then On again after a maximum of 2 seconds. Now, the distance (P1) is saved in

the sensor, and the target can be moved. I)

3) Place the target at the minimum distance requested (P2), then press shortly on the teach-button. The yellow LED

turns Off and then flashes 5 times. Now, the distance (P2) is saved in the sensor and the target can be moved. II)

I) P1 can be set to maximum exceeding the family specification for the sensor by removing the target in front of

the sensor. Push and hold the teach-button more than one second and the sensing distance is set at a unique

distance for this sensor only. Do not use this function for an analogue output.

II) The second switch point can be set to minimum by setting the target within the blind zone close to the sensor

head or by covering the sensor head with your hand while teaching P2.

Sensors with 1 digital output and one analogue output UA..CAD..PG/PK/NG or NK types

1) The factory settings are Normally Open (N.O.) for the digital output and positive slope for the analogue output.

Digital output

distance

2) To reverse the slope to negative and reverse the N.O. output to N.C., push the teach-button for 8

seconds (12 for UC18CAD22..) until the yellow LED flashes fast. Release the teach-button and the LED will flash 5

times to acknowledge the change in function.

Digital output

3) To switch back to positive slope or N.O. output, repeat step 2.

Installation Hints

To avoid interference from inductive voltage/ Relief of cable strain

current peaks, separate the prox. switch

Protection of the sensing face

Switch mounted on mobile carrier

power cables from any other power cables,

e.g. motor, contactor or solenoid cables

Incorrect

Correct

The cable should not be pulled

Any repetitive flexing of the

cable should be avoided

A proximity switch should not serve as

mechanical stop

Delivery Contents

• Ultrasonic sensor: UA18CAD....

• Installation instruction

• Mounting:

2 x M18 Nuts

2 x rubber washers

• Packaging: Carton box 35 x 10± x 1±3 mm

Specifications are subject to change without notice (12.05.2014)

相关型号：