185273K100AAC-F [CDE]

Film Capacitor, Polyester, 100V, 10% +Tol, 10% -Tol, 0.027uF, Through Hole Mount, RADIAL LEADED, ROHS COMPLIANT;
185273K100AAC-F
型号: 185273K100AAC-F
厂家: CORNELL DUBILIER ELECTRONICS    CORNELL DUBILIER ELECTRONICS
描述:

Film Capacitor, Polyester, 100V, 10% +Tol, 10% -Tol, 0.027uF, Through Hole Mount, RADIAL LEADED, ROHS COMPLIANT

文件: 总4页 (文件大小:254K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Type 168/185 Metallized Polyester Radial Lead Capacitors  
Radial Box Metallized Polyester Capacitors for Automatic Insertion  
The Type 168/185 series radial lead metallized polyester  
box capacitors are available in bulk (Type 168) or on  
ammo pack or tape and reel (Type 185). These capacitors  
are constructed in rugged rectangular plastic cases and  
all come with 5.0 mm (0.197") lead spacing. They are  
good for general purpose applications such as bypass,  
decoupling, energy storage/discharge and arc suppres-  
sion.  
Highlights  
Case and epoxy fill meets UL94V-0  
5.0 mm (0.197") lead spacing  
Bulk, tape and reel or ammo pack  
Non-inductively wound  
Non-polar  
Low leakage  
Lead material: Tinned copper wire  
Specifications  
RoHS Compliant  
Capacitance Range:  
Voltage Range:  
Capacitance Tolerance:  
0.001 µF to 1.0 µF  
50 Vdc to 400 Vdc (30 Vac to 200 Vac, 60 Hz)  
±5%, ±10%, ±20%  
Operating Temperature Range:  
Dielectric Withstand Voltage:  
Dissipation Factor (DF):  
–55 ºC to +125 ºC (with 50% Vdc derating >85 ºC)  
1.6 x rated voltage for 2 sec @ +25 ºC ±5 ºC  
tanδ x 10 –4 at 25 ºC ±5 ºC  
kHz  
1
C 0.1 µF C > 0.1 µF  
100  
150  
100  
150  
10  
100  
300  
Approximately 7 nH  
Total Self Inductance (L):  
Long Term Stability (after two years):  
Capacitance change C/C ±3% under stan-  
dard environmental conditions  
Vn  
50  
V/µs  
250  
250  
300  
400  
600  
Maximum Pulse Rise Time (dv/dt):  
63  
100  
250  
400  
If the working voltage (V) is less than the nominal voltage  
(Vn), the capacitor can work at higher dv/dt. In this case, the  
maximum value allowed is obtained by multiplying the above  
value with the ratio Vn/V.  
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com  
Type 168/185 Metallized Polyester Radial Lead Capacitors  
Test Method and Performance  
Capacitor Outline Drawing  
Insulation Resistance  
Test Conditions  
Temperature: 25 ºC ±5 ºC  
Voltage Charge Time: 1 minute  
Voltage Charge: 10 Vdc for Vn < 100 Vdc  
100 Vdc for Vn 100 Vdc  
T
Max  
L
Max  
H
Max  
Performance  
For Vn > 100 Vdc:  
C ≤ 0.33 µF, 15,000 MΩ  
C > 0.33 µF, ≥ 5,000 S  
.217 ±.039  
(5.5 ±1.0 mm)  
For Vn 100 Vdc: C ≤ 0.33 µF, 30,000 MΩ  
C > 0.33 µF, ≥ 10,000 S  
S
±.015  
(±0.4 mm)  
Damp Heat Test  
Test Conditions  
Temperature: +40 ºC  
Relative Humidity: 95%  
Test Duration: 21 days  
Lead length shown is as supplied on the 168 Series  
Performance  
Capacitance Change  
C/C: ±5%  
DF Change tgδ: ≤ 0.005 (10 KHz)  
Insulation Resistance: 50% of limit value  
Life Test  
Soldering  
Test Conditions  
Soldering Temperature: 260 ºC ±5 ºC  
Soldering Duration: 10 sec ±1 sec  
Performance  
Test Conditions  
REF  
Temperature: +85 ºC  
Test Duration: 2000 hrs  
Voltage Applied: 1.25 x Vn  
C/C: ±2%  
Capacitance Change  
DF Change tgδ: 30 x 10–4 at 10 kHz  
Insulation Resistance: limit value  
Performance  
Capacitance Change C/C: ±2%  
DF Change tgδ: ≤30 x 10–4 at 10 kHz  
Insulation Resistance: 50% of limit value  
Ratings  
RoHS  
Compliant  
Catalog  
Tape & Reel  
Ammo Pack  
Cap  
(µF)  
Inches  
H
Millimeters  
Part Number  
L
T
S
Ød  
L
T
H
S
Ød  
50 Vdc / 30 Vac  
168104*50A-F  
168154*50A-F  
168224*50C-F  
168334*50C-F  
168474*50H-F  
168684*50F-F  
168824*50G-F  
168105*50G-F  
185104*50#A>-F  
185154*50#A>-F  
185224*50#C>-F  
185334*50#C>-F  
185474*50#H>-F  
185684*50#F>-F  
185824*50#G>-F  
185105*50#G>-F  
0.10  
0.15  
0.22  
0.33  
0.47  
0.68  
0.82  
1.00  
0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
0.283 0.138 0.295 0.197 0.020 7.2 3.5 7.5 5.0 0.5  
0.283 0.138 0.295 0.197 0.024 7.2 3.5 7.5 5.0 0.6  
0.283 0.138 0.295 0.197 0.024 7.2 3.5 7.5 5.0 0.6  
0.283 0.236 0.433 0.197 0.024 7.2 6.0 11.0 5.0 0.6  
0.283 0.236 0.433 0.197 0.024 7.2 6.0 11.0 5.0 0.6  
0.283 0.236 0.433 0.197 0.024 7.2 6.0 11.0 5.0 0.6  
63 Vdc / 40 Vac  
168473*63A-F  
168563*63A-F  
168683*63A-F  
168823*63A-F  
168104*63A-F  
168154*63C-F  
168184*63C-F  
168224*63C-F  
168274*63C-F  
168334*63H-F  
168474*63H-F  
168684*63F-F  
168105*63G-F  
185473*63#A>-F 0.047 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
185563*63#A>-F 0.056 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
185683*63#A>-F 0.068 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
185823*63#A>-F 0.082 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
185104*63#A>-F  
185154*63#C>-F  
185184*63#C>-F  
185224*63#C>-F  
185274*63#C>-F  
185334*63#H>-F  
185474*63#H>-F  
185684*63#F>-F  
185105*63#G>-F  
0.10  
0.15  
0.18  
0.22  
0.27  
0.33  
0.47  
0.68  
1.00  
0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
0.283 0.138 0.295 0.197 0.020 7.2 3.5 7.5 5.0 0.5  
0.283 0.138 0.295 0.197 0.020 7.2 3.5 7.5 5.0 0.5  
0.283 0.138 0.295 0.197 0.020 7.2 3.5 7.5 5.0 0.5  
0.283 0.098 0.255 0.197 0.024 7.2 2.5 6.5 5.0 0.6  
0.283 0.138 0.295 0.197 0.024 7.2 3.5 7.5 5.0 0.6  
0.283 0.138 0.295 0.197 0.024 7.2 3.5 7.5 5.0 0.6  
0.283 0.177 0.374 0.197 0.024 7.2 4.5 9.5 5.0 0.6  
0.283 0.236 0.433 0.197 0.024 7.2 6.0 11.0 5.0 0.6  
* Indicates capacitance tolerance: J = ±5%, K = ±10%, M = ±20%  
# Indicates packaging type: R = Tape and Reel, A = Ammo Pack  
> Indicates tooling code: A = 16.5 mm, B = 18.5 mm, C = 16.0 mm (See H dimension in taping specifications)  
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com  
Type 168/185 Metallized Polyester Radial Lead Capacitors  
Catalog  
Tape & Reel  
Ammo Pack  
Cap  
(µF)  
Inches  
H
Millimeters  
Part Number  
L
T
S
Ød  
L
T
H
S
Ød  
100 Vdc / 63 Vac  
168102*100A-F 185102*100#A>-F 0.0010 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168152*100A-F 185152*100#A>-F 0.0015 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168222*100A-F 185222*100#A>-F 0.0022 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168272*100A-F 185272*100#A>-F 0.0027 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168332*100A-F 185332*100#A>-F 0.0033 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168392*100A-F 185392*100#A>-F 0.0039 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168472*100A-F 185472*100#A>-F 0.0047 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168562*100A-F 185562*100#A>-F 0.0056 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168682*100A-F 185682*100#A>-F 0.0068 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168822*100A-F 185822*100#A>-F 0.0082 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168103*100A-F 185103*100#A>-F 0.010 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168153*100A-F 185153*100#A>-F 0.015 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168183*100A-F 185183*100#A>-F 0.018 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168223*100A-F 185223*100#A>-F 0.022 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168273*100A-F 185273*100#A>-F 0.027 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168333*100C-F 185333*100#C>-F 0.033 0.283 0.098 0.295 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168393*100C-F 185393*100#C>-F 0.039 0.283 0.098 0.295 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168473*100C-F 185473*100#C>-F 0.047 0.283 0.098 0.295 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168683*100H-F 185683*100#H>-F 0.068 0.283 0.098 0.335 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168104*100H-F 185104*100#H>-F 0.10  
168154*100F-F 185154*100#F>-F 0.15  
168224*100G-F 185224*100#G>-F 0.22  
0.283 0.098 0.335 0.197 0.020 7.2 2.5 7.5 5.0 0.5  
0.283 0.177 0.394 0.197 0.024 7.2 4.5 9.5 5.0 0.6  
0.283 0.197 0.433 0.197 0.024 7.2 5.0 10.0 5.0 0.6  
250 Vdc / 160 Vac  
168332*250A-F 185332*250#A>-F 0.0033 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168472*250A-F 185472*250#A>-F 0.0047 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168682*250A-F 185682*250#A>-F 0.0068 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168103*250A-F 185103*250#A>-F 0.010 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168153*250A-F 185153*250#A>-F 0.015 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168223*250C-F 185223*250#C>-F 0.022 0.283 0.138 0.295 0.197 0.020 7.2 3.5 7.5 5.0 0.5  
168333*250C-F 185333*250#C>-F 0.033 0.283 0.138 0.295 0.197 0.020 7.2 3.5 7.5 5.0 0.5  
168473*250F-F 185473*250#F>-F 0.047 0.283 0.177 0.374 0.197 0.024 7.2 4.5 9.5 5.0 0.6  
168683*250F-F 185683*250#F>-F 0.068 0.283 0.177 0.374 0.197 0.024 7.2 4.5 9.5 5.0 0.6  
168104*250G-F 185104*250#G>-F 0.100 0.283 0.197 0.394 0.197 0.024 7.2 5.0 10 5.0 0.6  
400 Vdc / 200 Vac  
168102*400A-F 185102*400#A>-F 0.001 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168152*400A-F 185152*400#A>-F 0.0015 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168222*400A-F 185222*400#A>-F 0.0022 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168332*400C-F 185332*400#C>-F 0.0033 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168472*400C-F 185472*400#C>-F 0.0047 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5  
168682*400C-F 185682*400#C>-F 0.0068 0.283 0.138 0.295 0.197 0.020 7.2 3.5 7.5 5.0 0.5  
168103*400F-F 185103*400#F>-F 0.010 0.283 0.138 0.295 0.197 0.020 7.2 3.5 7.5 5.0 0.5  
168153*400F-F 185153*400#F>-F 0.015 0.283 0.177 0.374 0.197 0.024 7.2 4.5 9.5 5.0 0.6  
168223*400G-F 185223*400#G>-F 0.022 0.283 0.197 0.394 0.197 0.024 7.2 5.0 10 5.0 0.6  
* Indicates capacitance tolerance: J = ±5%, K = ±10%, M = ±20%  
# Indicates packaging type: R = Tape and Reel, A = Ammo Pack  
> Indicates tooling code: A = 16.5 mm, B = 18.5 mm, C = 16.0 mm (See H dimension in taping specification)  
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com  
Type 168/185 Metallized Polyester Radial Lead Capacitors  
Tape Specification - 5.0 mm Lead Spacing  
Item  
Code Millimeters  
5.0+0.6 –0.2  
Inches  
Case  
Quantity Quantity  
Reeled Ammo Pack  
Lead-to-Lead Distance  
Feed Hole Pitch  
P
.197+.024 –.040  
.5±.012  
Code  
P0 12.7±0.3  
P1 12.7±1.0  
P2 3.85±0.7  
P3 6.35±1.3  
A
C
F
2500  
1800  
1200  
1000  
1400  
3500  
1500  
1200  
1000  
1400  
Pitch of Component  
Hole Center to Lead  
Feed Hole Center to  
Component Center  
.5±.039  
.152±.028  
.250±.051  
G
H
Component Alignment, F-R h 0±2.0  
0±.079  
> The H dimension depends on the  
insertion equipment used. Specify  
the proper tooling code as indicated  
below.  
Tape Width  
W
18+1.0 –0.1  
.709+.039 –.004  
Hold-down Tape Width  
Hole Position  
W0 6.0 min  
.236 min  
W1 9.0+0.75 –0.05 .355+.030 –.001  
Hold-down Tape Position  
Height of Component  
from Tape Center  
Feed Hole Diameter  
W2 3.0 Max  
.118 Max  
>
Tooling  
H Dimensions  
Millimeters Inches  
H
>
Code  
A
B
C
16.5±0.75  
18.5±0.75  
16.0±0.75  
.679±0.030  
.728±0.030  
.630±0.030  
D0 4.0±0.3  
.157±.012  
Part Numbering System for Auto Insertion  
168/185  
104  
K
100  
R
H
B
–F  
Packaging  
*Tooling RoHS  
Code Compliant  
Type  
(#)  
Case  
Code  
Series  
Capacitance Tolerance  
Voltage  
(>)  
A
Designation  
185  
102 = .001 µF J = ±5%  
50 = 50 Vdc  
63 = 63 Vdc  
A = Ammo  
A
C
F
103 = .01 µF  
104 = .1 µF  
105 = 1.0 µF  
K = ±10%  
R = Tape & Reel  
B
M = ±20% 100 = 100 Vdc  
250 = 250 Vdc  
C
G
H
400 = 400 Vdc  
* Tooling code (>) depends on the users insertion equipment requirements. See table for available options.  
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY