185274J63RCC [CDE]
Film Capacitor, Polyester, 63V, 5% +Tol, 5% -Tol, 0.27uF, Through Hole Mount, 2814, RADIAL LEADED;
| 型号： | 185274J63RCC |
| 厂家： | 
CORNELL DUBILIER ELECTRONICS |
| 描述： | Film Capacitor, Polyester, 63V, 5% +Tol, 5% -Tol, 0.27uF, Through Hole Mount, 2814, RADIAL LEADED |
| 文件： | 总4页 (文件大小：231K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Type 168/185 Metallized Polyester Radial Lead Capacitors
Radial Box Metallized Polyester Capacitors for Automatic Insertion
The Type 168/185 series radial lead metallized polyester
box capacitors are available in bulk (Type 168) or on ammo
pack or radial tape and reel (Type 185). These capacitors
are constructed in rugged rectangular plastic cases and all
come with 5.0 mm (0.197”) lead spacing. They are good
for general purpose applications such as bypass, decoupling,
energy storage/discharge and arc suppression.
Highlights
♦ Rugged plastic case
♦ Case and epoxy fill meets UL94V-0
♦ 5.0 mm (0.197”) lead spacing
♦ Bulk, tape and reel or ammo pack
♦ Non-inductively wound
♦ Non-polar
♦ Low leakage
Specifications
Capacitance Range:
0.001 µF to 1.0 µF
Voltage Range:
Capacitance Tolerance:
50 Vdc to 400 Vdc (30 Vac to 200 Vac, 60 Hz)
±5%, ±10%, ±20%
Operating Temperature Range:
Dielectric Withstand Voltage:
Dissipation Factor (DF):
–55 ºC to +125 ºC (with 50% Vdc derating >85 ºC)
1.6 x rated voltage for 2 sec @ +25 ºC ±5 ºC
tgδ x 10 –4 at 25 ºC ±5 ºC
kHz
C ≤0.1 µF C > 0.1 µF
1
≤
100
150
≤
≤
300
≤100
150
10
100
≤
Total Self Inductance (L):
Approximately 7 nH
Long Term Stability (after two years):
Capacitance change ∆C/C ≤ ±3% under standard
environmental conditions
Maximum Pulse Rise Time (dv/dt):
Vn
50
V/ms
5
63
15
100
250
400
24
44
100
If the working voltage (V) is less than the nominal voltage (Vn),
the capacitor can work at higher dv/dt. In this case, the maxi-
mum value allowed is obtained by multiplying the above value
with the ratio Vn/V.
CDECornellDubilier•1605E.RodneyFrenchBlvd.•NewBedford,MA02744•Ph:(508)996-8561•Fax:(508)996-3830•www.cde.com
Type 168/185 Metallized Polyester Radial Lead Capacitors
Test Method and Performance
Capacitor Outline Drawing
Insulation Resistance
Test Conditions
Temperature
25 ºC ±5 ºC
T
L
Max
Voltage Charge Time
Voltage Charge
1 minute
Max
50 Vdc for Vn < 100 Vdc
100 Vdc for Vn ≥ 100 Vdc
H
Max
Performance
For Vn > 100 Vdc
For Vn ≤100 Vdc
≥30,000 MΩ
≥10,000 MΩ for C ≤ 0.1µF
≥1,000 MΩ x µF for C > 0.1µF
.217 ±.039
(5.5 ±1.0 mm)
Damp Heat Test
Test Conditions
Temperature
S
+40 ºC
95%
21 days
±.015
Relative Humidity
Test Duration
(±0.4 mm)
Performance
Capacitance Change ∆C/C ≤ ±5%
≤30 x 10–4 at 1 kHz
≥ 50% of limit value
Life Test
Lead length shown is as supplied on the 168 Series
DF Change ∆tgδ
Insulation Resistance
Test Conditions
Temperature
Soldering
+85 ºC
1000 hrs
1.25 x Vn
Test Conditions
Test Duration
Voltage Applied
Performance
Soldering Temperature
Soldering Duration
Performance
260 ºC ±5 ºC
10 sec ±1 sec
Capacitance Change ∆C/C ≤ ±5%
Capacitance Change C/C
DF Change ∆tgδ
Insulation Resistance
±2%
≤
∆
≤30 x 10–4 at 10 kHz
≤30 x 10–4 at 10 kHz
≥ limit value
DF Change ∆tgδ
Insulation Resistance
≥ 50% of limit value
Ratings
Catalog
Tape & Reel
Ammo Pack
Cap
Inches
Millimeters
Part Number
(µF)
L
T
H
S
Ød
L
T
H
S
Ød
50 Vdc / 30 Vac
168104*50A 185104*50#A> 0.10 0.283 0.098 0.256 0.197 0.024
168154*50A 185154*50#A> 0.15 0.283 0.098 0.256 0.197 0.024
168224*50C 185224*50#C> 0.22 0.283 0.138 0.295 0.197 0.024
168334*50C 185334*50#C> 0.33 0.283 0.138 0.295 0.197 0.024
168474*50H 185474*50#H> 0.47 0.283 0.177 0.335 0.197 0.024
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
2.5
2.5
3.5
3.5
4.5
5.0
6.0
6.0
6.5
6.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
7.5
7.5
8.5
168684*50F 185684*50#F>
0.68 0.283 0.197 0.394 0.197 0.024
10.0
11.0
11.0
168824*50G 185824*50#G> 0.82 0.283 0.236 0.433 0.197 0.024
168105*50G 185105*50#G> 1.00 0.283 0.236 0.433 0.197 0.024
63 Vdc / 40 Vac
168473*63A 185473*63#A> 0.047 0.283 0.098 0.256 0.197 0.024
168563*63A 185563*63#A> 0.056 0.283 0.098 0.256 0.197 0.024
168683*63A 185683*63#A> 0.068 0.283 0.098 0.256 0.197 0.024
168823*63A 185823*63#A> 0.082 0.283 0.098 0.256 0.197 0.024
168104*63A 185104*63#A> 0.10 0.283 0.098 0.256 0.197 0.024
168154*63C 185154*63#C> 0.15 0.283 0.138 0.295 0.197 0.024
168184*63C 185184*63#C> 0.18 0.283 0.138 0.295 0.197 0.024
168224*63C 185224*63#C> 0.22 0.283 0.138 0.295 0.197 0.024
168274*63C 185274*63#C> 0.27 0.283 0.138 0.295 0.197 0.024
168334*63H 185334*63#H> 0.33 0.283 0.177 0.335 0.197 0.024
168474*63H 185474*63#H> 0.47 0.283 0.177 0.335 0.197 0.024
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
2.5
2.5
2.5
2.5
2.5
3.5
3.5
3.5
3.5
4.5
4.5
5.0
6.0
6.5
6.5
6.5
6.5
6.5
7.5
7.5
7.5
7.5
8.5
8.5
10.0
11.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
168684*63F 185684*63#F>
0.68 0.283 0.197 0.394 0.197 0.024
168105*63G 185105*63#G> 1.00 0.283 0.236 0.433 0.197 0.024
* Indicates capacitance tolerance: J = ±5%, K = ±10%, M = ±20%
# Indicates packaging type: R = Tape and Reel, A = Ammo Pack
> Indicates tooling code: A = 16.5 mm, B = 18.5 mm, C = 16.0 mm (See H dimension in taping specifications)
CDECornellDubilier•1605E.RodneyFrenchBlvd.•NewBedford,MA02744•Ph:(508)996-8561•Fax:(508)996-3830•www.cde.com
Type 168/185 Metallized Polyester Radial Lead Capacitors
Catalog
Tape & Reel
Ammo Pack
Cap
(µF)
Inches
H
Millimeters
H
Part Number
L
T
S
Ød
L
T
S
Ød
100 Vdc / 63 Vac
168102*100A 185102*100#A> 0.0010 0.283 0.098 0.256 0.197 0.024
168152*100A 185152*100#A> 0.0015 0.283 0.098 0.256 0.197 0.024
168222*100A 185222*100#A> 0.0022 0.283 0.098 0.256 0.197 0.024
168272*100A 185272*100#A> 0.0027 0.283 0.098 0.256 0.197 0.024
168332*100A 185332*100#A> 0.0033 0.283 0.098 0.256 0.197 0.024
168392*100A 185392*100#A> 0.0039 0.283 0.098 0.256 0.197 0.024
168472*100A 185472*100#A> 0.0047 0.283 0.098 0.256 0.197 0.024
168562*100A 185562*100#A> 0.0056 0.283 0.098 0.256 0.197 0.024
168682*100A 185682*100#A> 0.0068 0.283 0.098 0.256 0.197 0.024
168822*100A 185822*100#A> 0.0082 0.283 0.098 0.256 0.197 0.024
168103*100A 185103*100#A> 0.010 0.283 0.098 0.256 0.197 0.024
168153*100A 185153*100#A> 0.015 0.283 0.098 0.256 0.197 0.024
168183*100A 185183*100#A> 0.018 0.283 0.098 0.256 0.197 0.024
168223*100A 185223*100#A> 0.022 0.283 0.098 0.256 0.197 0.024
168273*100A 185273*100#A> 0.027 0.283 0.098 0.256 0.197 0.024
168333*100C 185333*100#C> 0.033 0.283 0.138 0.295 0.197 0.024
168393*100C 185393*100#C> 0.039 0.283 0.138 0.295 0.197 0.024
168473*100C 185473*100#C> 0.047 0.283 0.138 0.295 0.197 0.024
168683*100H 185683*100#H> 0.068 0.283 0.177 0.335 0.197 0.024
168104*100H 185104*100#H> 0.10 0.283 0.177 0.335 0.197 0.024
168154*100F 185154*100#F> 0.15 0.283 0.197 0.394 0.197 0.024
168224*100G 185224*100#G> 0.22 0.283 0.236 0.433 0.197 0.024
250 Vdc / 160 Vac
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.5
3.5
3.5
4.5
4.5
5.0
6.0
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
7.5
7.5
7.5
8.5
8.5
10.0
11.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
168332*250A 185332*250#A> 0.0033 0.283 0.098 0.256 0.197 0.024
168472*250A 185472*250#A> 0.0047 0.283 0.098 0.256 0.197 0.024
168682*250A 185682*250#A> 0.0068 0.283 0.098 0.256 0.197 0.024
168103*250A 185103*250#A> 0.010 0.283 0.098 0.256 0.197 0.024
168153*250A 185153*250#A> 0.015 0.283 0.098 0.256 0.197 0.024
168223*250C 185223*250#C> 0.022 0.283 0.138 0.295 0.197 0.024
168333*250C 185333*250#C> 0.033 0.283 0.138 0.295 0.197 0.024
168473*250F 185473*250#F> 0.047 0.283 0.197 0.394 0.197 0.024
168683*250F 185683*250#F> 0.068 0.283 0.197 0.394 0.197 0.024
168104*250G 185104*250#G> 0.100 0.283 0.236 0.433 0.197 0.024
400 Vdc / 200 Vac
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
2.5
2.5
2.5
2.5
2.5
3.5
3.5
5.0
5.0
6.0
6.5
6.5
6.5
6.5
6.5
7.5
7.5
10
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
10
11
168102*400A 185102*400#A> 0.001 0.283 0.098 0.256 0.197 0.024
168152*400A 185152*400#A> 0.002 0.283 0.098 0.256 0.197 0.024
168222*400A 185222*400#A> 0.002 0.283 0.098 0.256 0.197 0.024
168332*400C 185332*400#C> 0.003 0.283 0.138 0.295 0.197 0.024
168472*400C 185472*400#C> 0.005 0.283 0.138 0.295 0.197 0.024
168682*400C 185682*400#C> 0.007 0.283 0.138 0.295 0.197 0.024
168103*400F 185103*400#F> 0.010 0.283 0.197 0.394 0.197 0.024
168153*400F 185153*400#F> 0.015 0.283 0.197 0.394 0.197 0.024
168223*400G 185223*400#G> 0.022 0.283 0.236 0.433 0.197 0.024
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
2.5
2.5
2.5
3.5
3.5
3.5
5.0
5.0
6.0
6.5
6.5
6.5
7.5
7.5
7.5
10
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
10
11
* Indicates capacitance tolerance: J = ±5%, K = ±10%, M = ±20%
# Indicates packaging type: R = Tape and Reel, A = Ammo Pack
> Indicates tooling code: A = 16.5 mm, B = 18.5 mm, C = 16.0 mm (See H dimension in taping specification)
CDECornellDubilier•1605E.RodneyFrenchBlvd.•NewBedford,MA02744•Ph:(508)996-8561•Fax:(508)996-3830•www.cde.com
Type 168/185 Metallized Polyester Radial Lead Capacitors
Tape Specification - 5.0 mm Lead Spacing
Case
Code
A
Quantity
Quantity
Item
Code Millimeters
Inches
Reeled Ammo Pack
0.6+0.04 –0.01 .024±.001
Lead-Wire Diameter
Lead-to-Lead Distance
Feed Hole Pitch
Pitch of Component
Hole Center to Lead
Feed Hole Center to
Ød
P
P0
2500
1800
1200
1000
1400
3500
1500
1200
1000
1400
5.0+0.6 –0.2
12.7±0.3
.197+.024 –.040
.5±.012
C
F
G
H
12.7±1.0
3.85±0.7
6.35±1.3
.5±.039
P1
P2
P3
.152±.028
.250±.051
> The H dimension depends on the
insertion equipment used. Specify
the proper tooling code as indicated
below.
Component Center
Component Alignment, F-R
Tape Width
Hold-down Tape Width
Hole Position
∆
h
W
W0
W1
W2
0±2.0
0±.079
18+1.0 –0.1
6.0 min
.709+.039 –.004
.236 min
9.0+0.75 –0.05 .355+.030 –.001
Tooling
H Dimensions
Hold-down Tape Position
3.0 Max
>
.118 Max
>
Code
Millimeters
Inches
.679±0.030
.728±0.030
.630±0.030
Height of Component
from Tape Center
Feed Hole Diameter
H
16.5±0.75
18.5±0.75
16.5±0.75
A
B
C
4.0±0.3
.157±.012
D0
Part Numbering System for Auto Insertion
185
104
K
100
R
H
B
Packaging
Type
*Tooling
Case
Code
(>)
A
B
C
Series
Capacitance Tolerance
Voltage
(#)
Code
185
102 = .001 µF J = ±5%
50 = 50 Vdc
63 = 63 Vdc
A = Ammo
R = Tape & Reel
A
C
F
103 = .01 µF
104 = .1 µF
105 = 1.0 µF
K = ±10%
M = ±20% 100 = 100 Vdc
250 = 250 Vdc
G
H
400 = 400 Vdc
* Tooling code (>) depends on the users insertion equipment requirements. See table for available options.
CDECornellDubilier•1605E.RodneyFrenchBlvd.•NewBedford,MA02744•Ph:(508)996-8561•Fax:(508)996-3830•www.cde.com
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明