ESRD151M04XB [CDE]
Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 4V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 2917, CHIP;型号: | ESRD151M04XB |
厂家: | CORNELL DUBILIER ELECTRONICS |
描述: | Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 4V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 2917, CHIP 电容器 |
文件: | 总6页 (文件大小:90K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SPA Capacitors
Solid Polymer Aluminum Surface Mount Capacitors
New!
Extended
Range Ratings,
20% More
Capacitance
Highlights
• Capacitance Range: 2.2 µF to 390 µF • Voltage Range: 2.0 Vdc to 16 Vdc
• Ripple current ratings up to 3.5Arms • Solid electrolyte for extended life
at 100 kHz and 105°C
• Low Impedance
• Footprint Compatible with “D” and
“E” Case Tantalum
• Ultra-Low E.S.R.; 10 mΩ @ 100 kHz • Flat Z and E.S.R. vs. temperature
• -55° to 105°C operating temperature Ignition free
•
Filtering power of 3 or more tantalum chips and 50 year life
Solid polymer aluminum capacitors combine the high capacitance make them ideal for bypassing high
capacitance capability of an electrolytic component frequency noise, and for switching frequency filtering
with the high frequency performance of film capacitors. in DC/ DC conversion. SPA capacitors are packaged in
When the need for low impedance at high frequency is a molded resin case with the same footprint (7.3x4.3
critical for your design, one SPA chip is capable of mm) as the industry standard tantalum “D” and “E”
replacing several liquid electrolyte aluminum or case sizes. The solid electrolyte results in a capacitor
tantalum capacitors connected in parallel. This is due with stable impedance and equivalent series resistance
to the ultra-low e.s.r. which results in significantly lower over the entire operating temperature range and they
impedance than either aluminum or tantalum have more than twice the ripple current handling
capacitors at frequencies of 100 kHz and above. There capability of tantalum capacitors. In addition, the
is no longer a need to stack capacitors to lower the solid electrolyte delivers a typical expected operating
impedance at high frequency. The low e.s.r. and high life of more than 50 years, and it is ignition free.
ESRE
ESRD
ESRL
CDE SPA Type
ESRD
ESRH*
Dimensions (mm)
7.3x4.3x4.1 7.3x4.3x2.8
7.3x4.3x1.8
2.2-120
7.3x4.3x1.1 7.3x4.3x2.8 & 4.1
100-390
15-68
Capacitance Range (µF)
68-270
0.018
3.3
68-270
Max. ESR at 100 kHz (Ω)
0.015
.035 - .040
.015 - .018
.025 - .110
Max.Ripple Current at 100 kHz (Arms)
2.0 - 3.0
3.5
1.0 - 2.7
1.4 - 1.6
*Operates to 125 C
˚
1605 East Rodney French Blvd.
New Bedford, MA 02744
(508) 996-8564, Fax (508) 996-3830
http://www.cornell-dubilier.com
E-mail: cdenb@cornell-dubilier.com
CORNELL
DUBILIER
Your Source For Capacitor Solutions
1.035
SPA Capacitors
Solid Polymer Aluminum Capacitors
Applications
Motherboard By-Pass
Switching Supply Input/Output Filters
Power Supply Decoupling
High Frequency Noise Reduction
Laptop LCD Displays
Automotive Digital Equipment
Portable Electronic Equipment
Markings
Polarity Stripe (Anode)
Capacitance
("R" = Decimal Point)
+
W.V. Code
D = 2.0 V
K = 8.0 V
B = 12.5 V
C = 16.0 V
E = 2.5 V
G = 4.0 V
J = 6.3 V
Lot Code
Ordering Information
M
ESRD
4R7
16
R
PACKAGING CODE
CDE
Type
R = Tape & Reel
ESRD (1.8mm Ht.): 3500 pcs/ reel
ESRD (2.8mm Ht.): 2000 pcs/ reel
ESRE: 2000 pcs/reel
ESRL: 3500 pcs/reel
B = Bulk Quantity
CAPACITANCE
CODE
4R7 = 4.7 µF
220 = 22 µF
101 = 100 µF
(100 pc multiples)
CAPACITANCE
TOLERANCE
M = ± 20%
WVDC CODE
02 = 2.0 Vdc 08 = 8.0 Vdc
0E = 2.5 Vdc 12 = 12.5 Vdc
04 = 4.0 Vdc 16 = 16.0 Vdc
06 = 6.3 Vdc
1605 East Rodney French Blvd.
CORNELL
DUBILIER
New Bedford, MA 02744
(508) 996-8564, Fax (508) 996-3830
http://www.cornell-dubilier.com
E-mail: cdenb@cornell-dubilier.com
Your Source For Capacitor Solutions
1.036
SPA Capacitors
Solid Polymer Aluminum Capacitors
ESRD Surface Mount
Outline Drawing
Dimensions in mm
Ratings
Part
Maximum
Maximum1
Case
Capacitance
Number
E.S.R
Ripple Current
Height
(Tape & Reel)
100kHz/20°C
100kHz/105°C
H
(µF)
(Ω)
(Amps)
(mm)
2.0 Vdc
100
120
ESRD101M02R
ESRD121M02XR
0.025
0.015
1.8
2.7
1.8 .1
1.8 .1
180
ESRD181M02R
0.018
2.2
2.8 .2
220
ESRD221M02R
0.018
2.2
2.8 .2
270
ESRD271M02XR
0.012
3.3
2.8 .2
2.5 Vdc
0.025
82
ESRD820M0ER
1.8
1.8 .1
100
150
ESRD101M0EXR
ESRD151M0ER
0.015
0.018
2.7
1.8 .1
2.2
2.2
2.8 .2
180
ESRD181M0ER
0.018
2.8 .2
220
ESRD221M0EXR
0.012
3.3
2.8 .2
4.0 Vdc
56
ESRD560M04R
0.025
1.8
2.7
1.8 .1
82
ESRD820M04XR
0.015
1.8 .1
120
ESRD121M04R
ESRD151M04XR
0.018
0.012
2.2
3.3
2.8 .2
150
2.8 .2
6.3 Vdc
10
ESRD100M06R
0.060
1.0
1.8 .1
1.3
22
ESRD220M06R
0.045
1.8 .1
33
ESRD330M06R
0.035
1.6
1.8
1.8 .1
47
ESRD470M06R
0.025
1.8 .1
68
ESRD680M06XR
0.015
2.7
1.8 .1
100
ESRD101M06R
0.018
2.2
3.3
2.8 .2
120
ESRD121M06XR
0.012
2.8 .2
8.0 Vdc
8.2
ESRD8R2M08R
0.060
1.0
1.8 .1
15
ESRD150M08R
0.045
1.3
1.6
1.8 .1
22
ESRD220M08R
0.035
1.8 .1
33
ESRD330M08R
0.025
1.8
1.8 .1
2.2
68
ESRD680M08R
0.018
2.8 .2
12.5 Vdc
4.7
ESRD4R7M12R
0.080
1.0
1.8 .1
10
ESRD100M12R
0.060
1.0
1.8 .1
1.8 .1
15
ESRD150M12R
0.050
1.3
1.3
22
ESRD220M12R
0.040
1.8 .1
1.0
16.0 Vdc
2.2
ESRD2R2M16R
0.110
1.8 .1
1.0
4.7
ESRD4R7M16R
0.080
1.8 .1
1.8 .1
1.8 .1
6.8
8.2
ESRD6R8M16R
ESRD8R2M16R
0.070
0.060
1.0
1.0
1 For other frequencies use the ripple current frequency multipliers.
1605 East Rodney French Blvd.
CORNELL
DUBILIER
New Bedford, MA 02744
(508) 996-8564, Fax (508) 996-3830
http://www.cornell-dubilier.com
E-mail: cdenb@cornell-dubilier.com
Your Source For Capacitor Solutions
1.037
SPA Capacitors
Solid Polymer Aluminum Capacitors
ESRE Surface Mount, High Capacitance
Outline Drawing
H = 4.1 ± .2
Dimensions in mm
Ratings
Part
Maximum
E.S.R
Maximum1
Capacitance
Number
Ripple Current
(Tape & Reel)
100kHz/20°C 100kHz/105°C
(µF)
(Ω)
(Amps)
2.0 Vdc
ESRE271M02R
270
330
0.015
0.015
0.010
3.0
ESRE331M02R
3.0
390
ESRE391M02XR
3.5
3.0
3.0
2.5 Vdc
ESRE221M0ER
220
270
0.015
0.015
0.010
ESRE271M0ER
330
ESRE331M0EXR
3.5
4.0 Vdc
ESRE181M04R
3.0
3.5
180
220
0.015
0.010
ESRE221M04XR
6.3 Vdc
150
180
ESRE151M06R
0.015
0.010
3.0
ESRE181M06XR
3.5
8.0 Vdc
100
ESRE101M08R
0.015
3.0
1
For other frequencies use the ripple current frequency multipliers.
1605 East Rodney French Blvd.
CORNELL
DUBILIER
New Bedford, MA 02744
(508) 996-8564, Fax (508) 996-3830
http://www.cornell-dubilier.com
Your Source For Capacitor Solutions
1.038
E-mail: cdenb@cornell-dubilier.com
SPA Capacitors
Solid Polymer Aluminum Capacitors
ESRL Surface Mount, Very Low Profile (1.1mm High)
Outline Drawing
Dimensions in mm
Ratings
Part
Number
Maximum
E.S.R
Maximum1
Ripple Current
Capacitance
(Tape & Reel)
100kHz/20°C 100kHz/105°C
(Ω)
(Amps)
(µF)
2.0 Vdc
1.6
68
ESRL680M02R
0.035
2.5 Vdc
ESRL560M0ER
0.035
56
1.6
4.0 Vdc
39
47
ESRL390M04R
0.035
1.6
1.6
0.035
ESRL470M04R
6.3 Vdc
ESRL330M06R
33
22
15
0.035
1.6
1.6
1.4
8.0 Vdc
ESRL220M08R
12.5 Vdc
0.035
ESRL150M12R
0.040
1 For other frequencies use the ripple current frequency multipliers.
1605 East Rodney French Blvd.
CORNELL
DUBILIER
New Bedford, MA 02744
(508) 996-8564, Fax (508) 996-3830
http://www.cornell-dubilier.com
E-mail: cdenb@cornell-dubilier.com
Your Source For Capacitor Solutions
1.039
SPA Capacitors
Solid Polymer Aluminum Capacitors
Specifications
Operating Temperature Range;
Moisture Resistance;
-55°C to +105°C, at 100% rated voltage
After 500 hours storage at +60°C and 90 to 95%
R.H. without load, the capacitor will meet the
following limits:
Surge Voltage;
125% of the rated working Vdc
∆C = +70%/-20% of the initial
measured value (2.0 Vdc, 2.5 Vdc),
+60%/-20% of the initial
Capacitance Range;
2.2 µF to 390 µF
measured value (4.0 Vdc),
+50%/-20% of the initial
measured value (6.3 Vdc),
+40%/-20% of the initial
Capacitance Tolerance;
±20% at 120 Hz and +20°C
DC Leakage Current (DCL);
After a two minute application of the rated
working voltage at +20°C:
measured value (all other voltages)
DF ≤ two times the initial specified value
DCL ≤ the initial specified value
2V - 4V: I ≤ 0.06CV
Life Test;
6.3V - 16V: I ≤ 0.04CV or 3µA
Apply rated DC working voltage at 105°C for
1000 hours, and then stabilize them to +20°C.
Capacitors will meet the following limits:
(whichever greater)
Dissipation Factor (DF);
The ratio of the capacitorís equivalent series
resistance to its reactance at 120Hz and +20°C.
ESRL & ESRD (1.8 mm ht.): D.F. is .06 Max.
ESRE & ESRD (2.8 mm ht.): D.F. is .10 Max.
∆C = ±10% of the initial measured value
DF ≤ the initial specified value
DCL ≤ the initial specified value
Resistance to Soldering Heat;
Shelf Life Test;
Heat the capacitors at 235°C in an oven for 200
seconds. The capacitors will meet the following
limits after stabilizing at 20°C:
Shelf life is typically 5 to 10 years. Accelerated
test: after 500 hours at 105°C, capacitors will meet
the following limits after stabilization at 20°C:
∆
C = ±10% of the initial measured value
∆C = ±10% of the initial measured value
DF ≤ the initial specified value
DF ≤ the initial specified value
DCL ≤ the initial specified value
DCL ≤ the initial specified value
Vibration;
Shear Test;
No abnormal change shall occur to capacitors that
have been soldered (and attached) to a board when
subjected to a vibration of 1.5 mm amplitude that
is varied from 10 Hz to 2000 Hz in 20 min. cycles.
The test duration is 2 hours for each right angle
direction (total 6 hours). Capacitance is monitored
during the last cycle of the test for stablilty.
No damage shall be visible after subjecting a
mounted capacitor to a side force of 5 N for 10
seconds
1605 East Rodney French Blvd.
CORNELL
New Bedford, MA 02744
(508) 996-8564, Fax (508) 996-3830
http://www.cornell-dubilier.com
DUBILIER
Your Source For Capacitor Solutions
1.040
E-mail: cdenb@cornell-dubilier.com
相关型号:
ESRD151M0EB
Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 2.5V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 2917, CHIP
CDE
ESRD181M02B
Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 2V, 20% +Tol, 20% -Tol, 180uF, Surface Mount, 2917, CHIP
CDE
ESRD181M0EB
Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 2.5V, 20% +Tol, 20% -Tol, 180uF, Surface Mount, 2917, CHIP
CDE
©2020 ICPDF网 联系我们和版权申明