PFCHS24C0.5S572T [CDE]
3-Phase AC Power Harmonic Filter Capacitors;型号: | PFCHS24C0.5S572T |
厂家: | CORNELL DUBILIER ELECTRONICS |
描述: | 3-Phase AC Power Harmonic Filter Capacitors |
文件: | 总5页 (文件大小:250K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Type PFCH, 3-Phase AC Power Harmonic Filter Capacitors
TypePFCH3-phase seriescapacitorsaredesignedtofilterundesirable
harmonics at the AC output of large inverter system. Each PFCH
capacitor is made with three self-healing metallized polypropylene
windings, connected in delta, enclosed in a cylindrical aluminum
case and filled with an environmentally friendly fluid. Typical
applications include wind turbine PFC controllers, solar inverter
output filters, and power line conditioning.
Highlights
- For 3-phase AC power harmonic filtering
- Delta connected
- Discharge resistors included
- UL810 approved internal pressure interrupter
Specifications
Capacitance Tolerance
Rated Frequency (fR)
0 to +10%
50 Hz and 60 Hz
240 Vac, 480 Vac, 600 Vac
–40 ºC to +55 ºC
0.5 kvar to 30.2 kvar
Rated AC Voltages (VR)
Operating Temperature Range
kvar Range
Maximum Permissible Voltage (Vmax)
110% of rated rms voltage
120% of rated peak voltage (1.2 x √2x Vrms)
Internal Connection
Delta (∆)
Maximum Permissible Current (Imax)
135% of nominal rms current based on rated kvar and rated voltage - (up
to 150% of lR including combined effects of harmonics, over voltages and
capacitances, tolerance)
Life
60,000 h w/94% survival rate
International Standards
FIT (Failure In Time)
Maximum Short Circuit Current
Meets IEEE18, Standard (ANSI/IEEE Standard 18)
≤300 X 109 component h
10 kA (according to UL 810)
Mechanical and Electrical Safety
Pressure Interrupter (PI) disengages all 3 phases in the event of capacitor
end of life or overload
Discharge Resistor Time
≤ 60 seconds ≤ 50 V for 600 V or less; over 600 V ≤ 5 minutes
RoHS Compliant
Dimensions
Construction Details
Extruded aluminum with
steel or aluminum cover
Case Material
Encapsulation
Environmentally safe
dielectric fluid
Terminal Material
Tin plated copper, brass
or steel
1.75”
0.05”
1.32”
0.05”
Max torque 88.5 in-lbs.
Figure 2Max torque 88.5 in-lbs.
Figure 1
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
1
Type PFCH, 3-Phase AC Power Harmonic Filter Capacitors
Part Numbering System
PFC
H
T
480
Voltage
(Vac)
C
6
S
779
T
Type
Base Type
Case Material
kvar
Tolerance
(%)
Can Height
(inches)
Phases
PFC
H = Harmonic S = 2”Round
T = 2½”Round
24 = 240
48 = 480
60 = 600
C = Aluminum case
w/steel cover
Full kvar value
including decimals
@ 60 Hz and
S = 0/+10%
Expressed as 3 digit
number of the case height
from base to top of lip
(including seam) rounded
and displayed without
decimal point
T = 3-Phase
V = 3”Round
M12 Stud
X = 3.5”Round
D = Aluminum case
w/aluminum cover
M12 Stud
Ratings
NOTE: Other ratings, sizes and performance specifications are available. Contact us.
Max Power (W)
Case
60Hz
Output Output
Kvar
50Hz
CDE
Catalog Number
Capacitance
(µF)
Rs
Rth
Diameter
(in)
Height
(in)
SA
(mΩ) (°C/W)
55°C
65°C
70°C
Style
Fig. 1
Kvar
(in2)
240 Vac
PFCHS24C0.5S572T
PFCHS24C1S572T
PFCHS24C1.5S572T
PFCHT24C2S572T
0.5
1
0.4
0.8
1.3
1.7
3 x 7.7
3 x 15.4
3 x 23.0
3 x 30.7
5.8
4.2
3.7
3.4
6.6
6.6
6.6
5.1
4.5
4.5
4.5
5.9
3.0
3.0
3.0
3.9
2.3
2.3
2.3
2.9
2.0
2.0
2.0
2.5
5.72
5.72
5.72
5.72
42
42
42
55
1.5
2
PFCHT24C2.5S572T
PFCHT24C3S572T
PFCHT24C4S778T
PFCHV24D5S842T
PFCHV24D6S842T
PFCHV24D6.3S842T
PFCHV24D7.5S108T
PFCHV24D8.3S108T
PFCHX24D10S108T
PFCHX24D12.5S108T
PFCHX24D15S137T
PFCHX24D16.7S137T
PFCHX24D17.5S137T
2.5
3
2.1
2.5
3 x 38.4
3 x 46.1
3 x 61.4
3 x 76.8
3 x 92.1
3 x 96.7
3 x 115.1
3 x 127.4
3 x 153.5
3 x 191.9
3 x 230.3
3 x 256.4
3 x 268.6
3.2
3.1
4.5
1.8
1.7
1.6
2.2
2.1
2.0
1.8
2.4
2.3
2.2
5.1
5.1
5.9
3.9
3.9
2.9
2.9
3.8
5.0
5.0
5.0
6.2
6.2
7.4
7.4
9.1
9.1
9.1
2.5
2.5
2.5
3.0
3.0
3.0
3.0
3.0
3.5
3.5
3.5
3.5
3.5
5.72
5.72
55
55
5.9
4
3.3
4.0
7.6
5.1
7.78
71
5
4.2
3.0
10.0
10.0
10.0
12.4
12.4
14.8
14.8
18.2
18.2
18.2
6.7
8.42
94
6
5.0
3.0
6.7
8.42
94
6.3
7.5
8.3
10
12.5
15
16.7
17.5
5.3
3.0
6.7
8.42
94
6.3
2.4
8.3
10.78
10.78
10.78
10.78
13.73
13.73
13.73
116
116
138
138
170
170
170
6.9
2.4
8.3
Fig. 2
8.3
2.0
9.8
10.4
12.5
13.9
14.6
2.0
9.8
1.7
12.2
12.2
12.2
1.7
1.7
480 Vac
6.6
PFCHS48C0.5S572T
PFCHS48C1S572T
PFCHS48C1.5S572T
PFCHS48C2S572T
PFCHS48C2.5S572T
PFCHS48C3S572T
PFCHT48C4S572T
PFCHT48C5S572T
0.5
1
0.4
0.8
1.3
1.7
2.1
2.5
3.3
4.2
3 x 1.9
3 x 3.8
3 x 5.8
3 x 7.7
3 x 9.6
3 x 11.5
3 x 15.4
3 x 19.2
11.3
6.9
5.4
4.7
4.3
4.0
3.6
3.4
4.5
4.5
4.5
4.5
4.5
4.5
5.9
5.9
3.0
3.0
3.0
3.0
3.0
3.0
3.9
3.9
2.3
2.3
2.3
2.3
2.3
2.3
2.9
2.9
2.0
2.0
2.0
2.0
2.0
2.0
2.5
2.5
5.72
5.72
5.72
5.72
5.72
5.72
5.72
5.72
42
42
42
42
42
42
55
55
6.6
1.5
2
6.6
6.6
Fig. 1
2.5
3
6.6
6.6
4
5.1
5
5.1
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
2
Type PFCH, 3-Phase AC Power Harmonic Filter Capacitors
Max Power (W)
65°C
Case
Height
(in)
60Hz
Output Output
Kvar
50Hz
CDE
Catalog Number
Capacitance Rs
Rth
Diameter
(in)
SA
(µF)
(mΩ) (°C/W)
55°C
70°C
Style
Fig. 1
(in2)
Kvar
480 Vac
PFCHT48C6S778T
PFCHT48C7.5S778T
PFCHT48C8.3S778T
PFCHV48D9S842T
PFCHV48D10S842T
PFCHV48D12.5S108T
PFCHV48D15S108T
PFCHX48D16.7S108T
PFCHX48D18S108T
PFCHX48D20S108T
PFCHX48D25S137T
PFCHX48D30S137T
6
7.5
8.3
9
5.0
6.3
3 x 23.0
3 x 28.8
3 x 31.9
3 x 34.5
3 x 38.4
3 x 48.0
3 x 57.6
3 x 64.1
3 x 69.1
3 x 76.8
3 x 95.9
3 x 115.1
5.3
4.9
4.8
2.2
2.1
2.8
2.6
2.4
2.3
2.2
2.9
2.7
4.0
4.0
4.0
3.0
3.0
2.4
2.4
2.0
2.0
2.0
1.7
1.7
600Vac
6.6
6.6
6.6
6.6
5.1
5.1
4.0
4.0
4.0
4.0
4.0
3.0
3.0
3.0
2.4
2.4
2.4
2.0
2.0
2.0
2.0
2.0
1.7
1.7
1.7
7.6
5.1
5.1
5.1
6.7
6.7
8.3
8.3
9.8
9.8
9.8
12.2
12.2
3.8
3.8
3.8
5.0
5.0
6.2
6.2
7.4
7.4
7.4
9.1
9.1
2.5
2.5
2.5
3.0
3.0
3.0
3.0
3.5
3.5
3.5
3.5
3.5
7.78
7.78
71
71
7.6
6.9
7.6
7.78
71
7.5
10.0
10.0
12.4
12.4
14.8
14.8
14.8
18.2
18.2
8.42
94
10
8.3
8.42
94
12.5
15
10.4
12.5
13.9
15.0
16.7
20.8
25.0
10.78
10.78
10.78
10.78
10.78
13.73
13.73
116
116
138
138
138
170
170
16.7
18
Fig. 2
20
25
30
PFCHS60C1S572T
PFCHS60C1.5S572T
PFCHS60C2S572T
1
1.5
2
0.8
1.3
3 x 2.5
3 x 3.7
7.4
5.9
5.1
4.6
4.2
3.8
5.9
5.5
5.5
5.4
5.3
2.6
2.5
2.5
3.6
3.1
3.1
2.9
2.8
2.8
2.6
2.5
3.6
3.4
3.2
4.5
4.5
3.0
3.0
3.0
3.0
3.9
3.9
5.1
5.1
5.1
5.1
5.1
6.7
6.7
6.7
8.3
8.3
8.3
9.8
9.8
9.8
9.8
9.8
12.2
12.2
12.2
2.3
2.3
2.3
2.3
2.9
2.9
3.8
3.8
3.8
3.8
3.8
5.0
5.0
5.0
6.2
6.2
6.2
7.4
7.4
7.4
7.4
7.4
9.1
9.1
9.1
2.0
2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.0
3.0
3.0
3.0
3.0
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
5.72
5.72
42
42
1.7
3 x 4.9
4.5
5.72
42
PFCHS60C2.5S572T
PFCHT60C3S572T
2.5
3
2.1
3 x 6.1
4.5
5.72
42
2.5
3 x 7.4
5.9
5.72
55
PFCHT60C4S572T
4
3.3
3 x 9.8
5.9
5.72
55
Fig. 1
PFCHT60C5S778T
5
4.2
3 x 12.3
3 x 14.7
3 x 15.0
3 x 15.5
3 x 16.9
3 x 18.4
3 x 19.9
3 x 20.4
3 x 24.6
3 x 30.0
3 x 30.7
3 x 33.9
3 x 35.9
3 x 36.8
3 x 41.0
3 x 43.0
3 x 49.1
3 x 55.3
3 x 61.4
7.6
7.78
71
PFCHT60C6S778T
6
5.0
7.6
7.78
71
PFCHT60C6.1S778T
PFCHT60C6.3S778T
PFCHT60C6.9S778T
PFCHV60D7.5S842T
PFCHV60D8.1S842T
PFCHV60D8.3S842T
PFCHV60D10S108T
PFCHV60D12.2S108T
PFCHV60D12.5S108T
PFCHX60D13.8S108T
PFCHX60D14.6S108T
PFCHX60D15S108T
PFCHX60D16.7S108T
PFCHX60D17.5S108T
PFCHX60D20S137T
PFCHX60D22.5S137T
PFCHX60D25S137T
6.1
6.3
6.9
7.5
8.1
8.3
10
5.1
7.6
7.78
71
5.3
7.6
7.78
71
5.8
7.6
7.78
71
6.3
10.0
10.0
10.0
12.4
12.4
12.4
14.8
14.8
14.8
14.8
14.8
18.2
18.2
18.2
8.42
94
6.8
8.42
94
6.9
8.42
94
8.3
10.78
10.78
10.78
10.78
10.78
10.78
10.78
10.78
13.73
13.73
13.73
116
116
116
138
138
138
138
138
170
170
170
12.2
12.5
13.8
14.6
15
10.2
10.4
11.5
12.2
12.5
13.9
14.6
16.7
18.8
20.8
Fig. 2
16.7
17.5
20
22.5
25
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
3
Type PFCH, 3-Phase AC Power Harmonic Filter Capacitors
Performance Notes
Rs: Equivalent series resistance – Ohmic resistances (Ohm)
Dielectric Dissipation Factor: tan δ (Polypropylene: 0.0002)
T
hs : Hotspot temperature within the capacitor: Ths = T + (Ptotal · 280 / SA)
a
Ta: Ambient temperature
Rth:Thermal resistance: °C/ Watt, indicates hot spot temperature rise due to power dissipation losses
Pmax: Maximum power dissipation: Pmax = (85 ºC- T ) / Rth (Watts)
a
PTotal: Total Power generated by Dielectric and Ohmic Losses: P= Vpeak . C . TT F .DF(Watts)
given Voltage
given Current
2
.
P = I2 . [Rs (XC DF)] (Watts)
+
.
Where PTotal = PFund + PHarm1 + PHarm2 + .... + PHarm
∞
Design life: 60,000 hours 94% survival Ths:85 °C
Expected lifetime vs. applied voltage and hot spot temperature
1.2
1.15
1.1
85 ºC
80 ºC
70 ºC
60 ºC
1.05
1
0.95
0.9
0.85
0.8
1000
10000
100000
1000000
Expected life time (h)
4
Type PFCH, 3-Phase AC Power Harmonic Filter Capacitors
Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and
data (collectively, the “Information”) in this datasheet or other publication are subject to change. The cus-
tomer is responsible for checking, confirming and verifying the extent to which the Information contained
in this datasheet or other publication is applicable to an order at the time the order is placed. All Informa-
tion given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty,
representation or responsibility of any kind, expressed or implied. Statements of suitability for certain appli-
cations are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell
Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such ap-
plications, but are not intended to constitute any guarantee, warranty or representation regarding any such
matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation
concerning the suitability for a specific customer application, use, storage, transportation, or operating
environment. The Information is intended for use only by customers who have the requisite experience and
capability to determine the correct products for their application. Any technical advice inferred from this In-
formation or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier prod-
ucts is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obliga-
tion or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most
stringent quality and safety standards regarding the design and manufacturing of its products, in light of
the current state of the art, isolated component failures may still occur. Accordingly, customer applications
which require a high degree of reliability or safety should employ suitable designs or other safeguards (such
as installation of protective circuitry or redundancies or other appropriate protective measures) in order
to ensure that the failure of an electrical component does not result in a risk of personal injury or property
damage. Although all product-related warnings, cautions and notes must be observed, the customer should
not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety
measures may not be required.
5
相关型号:
©2020 ICPDF网 联系我们和版权申明