SIL865970 [CELDUC]

AC Semiconductor Contactor pitch 22,5mm compact size and DIN rail mounting.; AC半导体接触器间距22,5mm紧凑的尺寸和DIN导轨安装。


型号：	SIL865970
厂家：	celduc-relais
描述：	AC Semiconductor Contactor pitch 22,5mm compact size and DIN rail mounting. AC半导体接触器间距22,5mm紧凑的尺寸和DIN导轨安装。半导体
文件：	总4页 (文件大小：267K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

S/CLP/SIL865970/B/21/04/2004

celpac

page 1 / 4GB

AC Semiconductor Contactor

pitch 22,5mm

SIL865970

compact size and DIN rail mounting.

Output : 24-510VAC 32A(*)

Input : 150-240VAC/DC

❏ Ready to use Single-Phase Relay: " Install it & Forget it!"

❏ Zero cross model : 24-510VAC 50A

back to back thyristors on output -

TMS²technology - I²t value > 1500A²s

❏ Large control range : 150-240VAC/DC

Green LED visualization on the input.

❏ Very high immunity : Voltage protection on output

and input- 4kV according IEC61000-4-4 & 5

❏ IP20 housing

❏ Low leakage current (<1mA) and low zero cross

voltage.

❏ Mounting and dismounting on DIN rail without any

tool or directly mountable on panel.

❏ Designed in conformity with EN60947-4-3

(IEC947-4-3) and EN60950

-UL-cUL

(*) see conditions (thermal curve page 3)

22A

400VAC 50hz

Dimensions :

Protection

SSR

Typical

application:

A2 A1

9kW resistor

Commande

(AC-51 load)

on 400 VAC

Load

CHARGE

Proud to serve you

celduc

All technical caracteristics are subject to change without previous notice.

Caractéristiques sujettes à modifications sans préavis.

r e l a i s

S/CLP/SIL865970/B/21/04/2004

celpac

page 2 / 4GB

Control characteristics (at 25°C)

Input : Ic = f( Uc)

Paramètre / Parameter

Control voltage : AC control

Control voltage : DC control

Control current (@ Uc )

Release voltage

Symbol Min

Nom Max Unit

150

110

230

240

VAC

VDC

Uc off

Input LED

green

100

150

200

250

Input immunity : EN61000-4-4

Input immunity : EN61000-4-5

2kV

2KV

U c (V)

Output characteristics (at 20°C)

Parameter

Conditions

Symbol

Uemin-max

Typ.

400

24-510

1200

Unit

Load voltage

Operating range

Peak voltage

V rms

Clamping voltage

Zero cross level

Latching voltage

Uclamp

Usync

820 (@1mA)

Ie nom

AC-51 nominal current : permanent

AC-53 nominal current

Non repetitive overload current

On state voltage drop (typical value)

Dynamic resistance (typical value)

( see Fig. 2 page 3)

Ie AC-51

Ie AC-53

Itsm

550

0,9

A rms

tp=10ms (Fig. 3)

@ 25°C

Output Power dissipation (typical value)

0,81xIe+0,08xIe²

Thermal resistance between junction to air

Off state leakage current

Minimum load current

Turn on time

Turn off time

Operating frequency range

Off state dv/dt

Rthj/a

Ilk

Iemin

ton max

toff max

dv/dt

di/dt

I²t

3,3 (2,5)

K/W

V/µs

A/µs

A²s

@Ue, 50Hz

0,1-440

500

1500

Uc nom DC ,f=50Hz

Maximum di/dt non repetitive

I2t (<10ms)

Conducted immunity level

Short circuit protection

IEC 1000-4-4 (burst)

IEC 1000-4-5(schocks)

FERRAZ

4kV criterion A

gRC 25A/32A/50A/63A 14x51

General characteristics (at 20°C)

Input to output insulation

Output to case insulation

Insulation resistance

Rated impulse voltage

Uimp

4000

100 (@500VDC)

VRMS

4000

Protection level / CEI529

Pollution degree

IP20

Vibration resistance 10 -55 Hz according to CEI68 :

Shocks resistance according to CEI68 ( on DIN rail / with screws)

Ambient temperature (with no icing or condensation)

Storage temperature (with no icing or condensation)

Ambient humidity

Weight

double amplitude

1,5

30/50

-30 /+80

-30/+100

40 to 85

°C

260

Conformity

EN60947-4-3 (IEC947-4-3)

EN60950 UL/cUL pending

celduc

www.celduc.com

Rue Ampère B.P. 4

42290 SORBIERS - FRANCE

E-Mail : celduc-relais@celduc.com

Fax +33 (0) 4 77 53 85 51

Service Commercial France Tél. : +33 (0) 4 77 53 90 20

Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tél. +33 (0) 4 77 53 90 19

S/CLP/SIL865970/B/21/04/2004

celpac

page 3 / 4/GB

Thermal specifications .

Current according ambient temperature :

The curve "1" gives the limits of the product.

The temperature reached are acceptable for the com-

ponents. These values are in compliance with most of

SSRs manufacturers.

In a cabinet with a minimum of ventilation or a non

permanent current, these values are correct.

The curve "2" gives the limits of the product

according to EN60947-4-3 with a maximum rise

temperature of 50°C (@40°C) for a permanent

working and in air calm ( test during 8 hours).

For a non permanent current, you can calcule

the average power = Pd x duty cycle and check the

rise temperature : Tj = Pd x Rthj/a (Pd and Rthj/a are

given page 2)). The junction temperature must not

exceed 125°C at the maximum ambient temperature.

The maximum current is limited to the size of the

thyristors = 50A.

10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85

Tambient(°C)

The thermal constant (Cth) of the product is 7

minutes. That means the rise temperature is only 63%

of the stabilized temperature after a running time of

7 minutes.

fig 2

Surge current : Itsm (Apeak) = f(t) for 50A models with Itsm =550A

Fig.3

Overload current .

1 - No repetitive Itsm is given without voltage

reapplied . This curve is used for the

determination of the protection.

600

400

2 - Repetitive Itsm is given for inrush current

with initial Tj = 70°C. In normal working , this

curve musn't be exceed. Be carefull, the

repetition of the surge current decrease the

lifetime SSR's .

No repetive surge current without voltage reapplied.

200

Repetive surge current with voltage reapplied.

fig 3

0,01

0,1

t (s)

Mounting and dismounting on DIN rail without any tool.

Panel Mounting

Mount ing

88±2mm

DIN rail connected to

protection wire (ground) .

Dismount ing

12,7mm

Warning ! semiconductor relays don't provide any galvanic insulation between the load and the mains. Always use in

conjunction with an adapted circuit breaker with isolation feature or a similar device in order to ensure a reliable isolation in the

event of wrong function and when the relay must be insulated from the mains (maintenance ; if not used for a long duration ...).

celduc

www.celduc.com

Rue Ampère B.P. 4

42290 SORBIERS - FRANCE

E-Mail : celduc-relais@celduc.com

Fax +33 (0) 4 77 53 85 51

Service Commercial France Tél. : +33 (0) 4 77 53 90 20

Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tél. +33 (0) 4 77 53 90 19

S/CLP/SIL865970/B/21/04/2004

celpac

page 4 / 4GB

wires

torques

screwdriver

Connections .

(mm²)

For the output terminals, the wire cross sections must

screwdriver

be adapted to the load current and to the overcurrent protection

device characteristics. The relay rated voltage must be adapted

to the mains rated voltage.

control

1 x(0,75-->2,5)

L = 6mm

0,4N.m

(0,6N.m max)

3,5x0,5mm

celpac use screw clamp connections.

Power

1x(1,5-->16) 1 x(1,5-->10)

L = 10mm

1,2N.m

(1,8N.m max)

Pozidriv2/

0,8x5,5 (1x6)

Mounting

Warning : only in vertical position. The user should protect heat sensitive materials as

well as persons against any contacts with the heatsink. For non vertical mounting , the load

current must be 50% lower than the rated one . For a good cooling, the SSR needs an air

convection. Less convection air produces an abnormal heating. Keep a distance between

the upper SSR and the lower SSR. In case of no space between two SSR ( zero space

between two SSRs) , please reduce the load current. For further details refer to below :

Ø Derating current with no space between SSRs

AC-51 nominal currents are given with a space of 22,5mm between each SSR, for a

permanent current during a minimum time of 8 hours in air calm according to IEC60947-4-3.

In case of non permanent currents or in case of SSRs are mounted with no space, you must

check the heatsink temperature never exceed 90°C. When the SSRs are mounted side to

side ( no space between each relay) a derating current of 25% must be take into account.

A forced cooling ( fan inside the cabinet) improves significantly the thermal performances.

vert ical

posit ion

8 0 mm

Typical application : LOADS

SIL product is designed mainly for AC-51 résistive load. AC-53 motor current are

also given . For other loads, check the inrush current at turn ON and possible overvoltages

at turn OFF or consult us :

* AC-55b : Incandescent lamps : Inrush current is generally 10 times In during few 10ms.

So limit the nominal current at about 15A.

* AC-55a : Electric discharge lamp : These loads often have overcurrent at turn ON and

overvoltage at turn OFF, so we advise to use 400VAC SSR on 230VAC mains.

* AC-56a : Transformers loads : Very high inrush current up to 100 times In . We advise to

use random SSR.

1 ~

* AC-56b : Capacitors loads : Very high current at turn ON and overvolatge at turn OFF,

please consult us with 1600V peak SSR with high inrush current.

Fuse

Fusible

Protection :

To protect the SSR against a short-circuit of the load , use a fuse with a I t value = 1/2 I t

value specified page 2. A test has been made with FERRAZ fuse ( see page 2).

It is possible to protect SSR by MCB ( miniature circuit breaker). In this case, see application

note ( SSR protection) and use a SSR with high I t value (5000A s minimum).

EMC :

Immunity :

We give in our data-sheets, the immunity level of our SSRs according to the main

standards for this type of products : EN61000-4-4 &5. You can see the high immunity level

in comparison with the products on the market.

Emission:

cont rol

SSRs are complex devices which must be interconnected with other equipment

Load

Charge

(loads, cables,etc.) to form a system. Because the other equipment or the interconnections

may not be under the control of celduc it shall be the responsibility of the system integrator

to ensure that systems containing SSRs comply with the requirements of any rules and

regulations applicable at the system level. The very low zero cross voltage (<20V) improves

the conducted emission level in comparison with most of SSR on the market with zero cross

voltage higher than 50V. Consult celduc laboratory which can make some tests in your

application.

celduc

www.celduc.com

Rue Ampère B.P. 4

42290 SORBIERS - FRANCE

E-Mail : celduc-relais@celduc.com

Fax +33 (0) 4 77 53 85 51

Service Commercial France Tél. : +33 (0) 4 77 53 90 20

Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tél. +33 (0) 4 77 53 90 19

SIL865970 [CELDUC]

相关型号：

SIL867170

SIL87374X

SIL9-81.8KOHM

SIL9-8560KOHM

SIL9-8560OHM

SIL9-856KOHM

SIL9-856OHM

SIL9-868OHM

SIL9022

SILA180

SILA180-S05

SILA180-S08