首页 |元器件品牌

PS7113L-2A-E4-A [CEL]

6, 8-PIN DIP, 100 V BREAK DOWN VOLTAGE 350 mA CONTINUOUS LOAD CURRENT 1-ch, 2-ch Optical Coupled MOS FET; 6 ， 8引脚DIP ， 100 V击穿电压350毫安连续负载电流1路， 2路光耦合MOS场效应管
PS7113L-2A-E4-A
型号： PS7113L-2A-E4-A
厂家： CALIFORNIA EASTERN LABS    CALIFORNIA EASTERN LABS
描述：

6, 8-PIN DIP, 100 V BREAK DOWN VOLTAGE 350 mA CONTINUOUS LOAD CURRENT 1-ch, 2-ch Optical Coupled MOS FET
6 ， 8引脚DIP ， 100 V击穿电压350毫安连续负载电流1路， 2路光耦合MOS场效应管

光电 输出元件
文件： 总14页 (文件大小：209K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
Solid State Relay  
OCMOS FET  
PS7113-1A,-2A,PS7113L-1A,-2A  
6, 8-PIN DIP, 100 V BREAK DOWN VOLTAGE  
350 mA CONTINUOUS LOAD CURRENT  
1-ch, 2-ch Optical Coupled MOS FET  
−NEPOC Series−  
DESCRIPTION  
The PS7113-1A, -2A and PS7113L-1A, -2A are solid state relays containing GaAs LEDs on the light emitting side  
(input side) and MOS FETs on the output side.  
They are suitable for analog signal control because of their low offset and high linearity.  
The PS7113L-1A, -2A have a surface mount type lead.  
FEATURES  
•
•
•
•
•
•
1 channel type (1 a output) or 2 channel type (1 a + 1 a output)  
Low LED operating current (IF = 2 mA)  
Designed for AC/DC switching line changer  
Small package (6, 8-pin DIP)  
Low offset voltage  
Ordering number of taping product : PS7113L-1A-E3, E4: 1 000 pcs/reel  
: PS7113L-2A-E3, E4: 1 000 pcs/reel  
Pb-Free product  
<R>  
•
•
Safety standards  
• UL approved: File No. E72422  
• BSI approved: No. 8245/8246  
• CSA approved: No. CA 101391  
APPLICATIONS  
•
•
•
Exchange equipment  
Measurement equipment  
FA/OA equipment  
Document No. PN10269EJ02V0DS (2nd edition)  
Date Published July 2006 NS CP(K)  
1996, 2006  
The mark <R> shows major revised points.  
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.  
PS7113-1A,-2A,PS7113L-1A,-2A  
PACKAGE DIMENSIONS (in millimeters)  
PS7113-1A  
PS7113L-1A  
TOP VIEW  
TOP VIEW  
6
5
4
6
5
4
9.25±0.5  
9.25±0.5  
1
2
3
1
2
3
1. LED Anode  
2. LED Cathode  
3. NC  
1. LED Anode  
2. LED Cathode  
3. NC  
4. MOS FET Drain  
5. MOS FET Source  
6. MOS FET Drain  
4. MOS FET Drain  
5. MOS FET Source  
6. MOS FET Drain  
7.62  
6.5±0.5  
6.5±0.5  
0.9±0.25  
9.60±0.4  
2.54  
1.34±0.1  
0.25 M  
0 to 15˚  
0.5±0.1  
1.34±0.1  
2.54  
0.25 M  
PS7113-2A  
PS7113L-2A  
TOP VIEW  
TOP VIEW  
9.25±0.5  
9.25±0.5  
6
5
4
6
5
4
8
7
8
7
1
2
3
1
2
3
1. LED Anode  
2. LED Cathode 6. MOS FET  
3. LED Anode  
7. MOS FET  
5. MOS FET  
1. LED Anode  
2. LED Cathode 6. MOS FET  
3. LED Anode  
7. MOS FET  
4. LED Cathode 8. MOS FET  
5. MOS FET  
4. LED Cathode 8. MOS FET  
7.62  
6.5±0.5  
6.5±0.5  
0.9±0.25  
9.60±0.4  
2.54  
1.34±0.1  
0.25 M  
0 to 15˚  
0.5±0.1  
1.34±0.1  
0.25 M  
2.54  
2
Data Sheet PN10269EJ02V0DS  
PS7113-1A,-2A,PS7113L-1A,-2A  
<R>  
MARKING EXAMPLE  
PS7113-1A  
PS7113-2A  
No. 1 pin  
Mark  
No. 1 pin  
Mark  
Country Assembled  
Type Number  
Assembly Lot  
Country Assembled  
Type Number  
PS7113-1A  
NL601  
PS7113-2A  
Assembly Lot  
NL601  
N L 6 01  
N L 6 01  
Week Assembled  
Week Assembled  
Year Assembled  
(Last 1 Digit)  
Year Assembled  
(Last 1 Digit)  
In-house Code  
(L: Pb-Free)  
In-house Code  
(L: Pb-Free)  
Rank Code  
Rank Code  
3
Data Sheet PN10269EJ02V0DS  
PS7113-1A,-2A,PS7113L-1A,-2A  
<R>  
ORDERING INFORMATION  
Part Number  
Order Number  
Solder Plating  
Specification  
Packing Style  
Safety Standard Application Part  
Approval  
Number*1  
PS7113-1A  
PS7113-1A-A  
Pb-Free  
Magazine case 50 pcs  
Standard products PS7113-1A  
(UL, BSI, CSA  
PS7113L-1A  
PS7113L-1A-A  
PS7113L-1A-E3-A  
PS7113L-1A-E4-A  
PS7113-2A-A  
PS7113L-1A-E3  
PS7113L-1A-E4  
PS7113-2A  
Embossed Tape 1 000 pcs/reel approved)  
Magazine case 50 pcs  
PS7113-2A  
PS7113L-2A  
PS7113L-2A-A  
PS7113L-2A-E3-A  
PS7113L-2A-E4-A  
PS7113L-2A-E3  
PS7113L-2A-E4  
Embossed Tape 1 000 pcs/reel  
*1 For the application of the Safety Standard, following part number should be used.  
4
Data Sheet PN10269EJ02V0DS  
PS7113-1A,-2A,PS7113L-1A,-2A  
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)  
Ratings  
PS7113-1A, PS7113-2A,  
Parameter  
Symbol  
Unit  
PS7113L-1A PS7113L-2A  
Diode  
Forward Current (DC)  
Reverse Voltage  
IF  
VR  
PD  
IFP  
VL  
IL  
50  
5.0  
50  
mA/ch  
V
Power Dissipation  
mW/ch  
A/ch  
V
Peak Forward Current *1  
1
MOS FET Break Down Voltage  
100  
350  
Continuous  
Connection A  
Connection B  
Connection C  
mA/ch  
Load Current *2  
450  
700  
−
−
Pulse Load Current *3  
(AC/DC Connection)  
ILP  
600  
mA/ch  
Power Dissipation  
Isolation Voltage *4  
PD  
BV  
PT  
560  
610  
375  
850  
mW/ch  
Vr.m.s.  
mW  
1 500  
Total Power Dissipation  
Operating Ambient Temperature  
Storage Temperature  
TA  
−40 to +85  
°C  
Tstg  
−40 to +100  
°C  
*1 PW = 100 µs, Duty Cycle = 1%  
*2 Conditions: IF ≥ 2 mA. The following types of load connections are available.  
6
1
Connection A  
Connection B  
Connection C  
2
3
5
V
V
L
L
(AC/DC)  
(DC)  
I
I
L
L
L
L
4
6
5
+
–
1
2
3
4
6
1
2
3
–
+
5
4
V
V
L
L
(DC)  
(DC)  
I
I
L
L
L
6
5
+
–
L
1
2
3
I
L
+ I  
L
I
L
4
*3 PW = 100 ms, 1 shot  
*4 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output  
Pins 1-3 shorted together, 4-6 shorted together. (PS7113-1A)  
Pins 1-4 shorted together, 5-8 shorted together. (PS7113-2A)  
5
Data Sheet PN10269EJ02V0DS  
PS7113-1A,-2A,PS7113L-1A,-2A  
RECOMMENDED OPERATING CONDITIONS (TA = 25°C)  
Parameter  
LED Operating Current  
LED Off Voltage  
Symbol  
MIN.  
TYP.  
10  
MAX.  
Unit  
mA  
V
IF  
2
0
20  
VF  
0.5  
ELECTRICAL CHARACTERISTICS (TA = 25°C)  
Parameter  
Symbol  
VF  
Conditions  
MIN.  
TYP.  
1.2  
MAX.  
1.4  
Unit  
V
Diode  
Forward Voltage  
Reverse Current  
IF = 10 mA  
VR = 5 V  
IR  
5.0  
µA  
µA  
MOS FET Off-state Leakage  
Current  
ILoff  
VD = 100 V  
0.03  
250  
1.0  
Output Capacitance  
Cout  
IFon  
Ron1  
Ron2  
ton  
VD = 0 V, f = 1 MHz  
IL = 350 mA  
pF/ch  
mA  
Ω
Coupled  
LED On-state Current  
On-state Resistance  
2.0  
2.5  
IF = 10 mA, IL = 10 mA  
0.9  
IF = 10 mA, IL = 350 mA, t ≤ 10 ms  
IF = 10 mA, VO = 5 V, RL = 500 Ω,  
PW ≥ 10 ms  
Turn-on Time *1, 2  
1.3  
3.0  
0.2  
ms  
Turn-off Time *1, 2  
toff  
0.06  
Isolation Resistance  
Isolation Capacitance  
RI-O  
CI-O  
VI-O = 1.0 kVDC  
109  
Ω
V = 0 V, f = 1 MHz  
1.1  
pF/ch  
*1 Test Circuit for Switching Time  
I
F
50 %  
Input  
Pulse Input  
V
L
0
V
O
= 5 V  
90 %  
10 %  
Input monitor  
VO  
monitor  
Output  
Rin  
RL  
t
on  
t
off  
<R>  
*2 The turn-on time and turn-off time are specified as input-pulse width ≥ 10 ms.  
Be aware that when the device operates with an input-pulse width less than 10 ms, the turn-on time and turn-off  
time will increase.  
6
Data Sheet PN10269EJ02V0DS  
PS7113-1A,-2A,PS7113L-1A,-2A  
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)  
MAXIMUM FORWARD CURRENT vs.  
AMBIENT TEMPERATURE  
MAXIMUM LOAD CURRENT vs.  
AMBIENT TEMPERATURE  
100  
80  
500  
400  
300  
200  
60  
40  
20  
0
100  
0
–25  
0
25  
50  
7585  
(˚C)  
100  
–25  
0
25  
50  
7585  
(˚C)  
100  
Ambient Temperature T  
A
Ambient Temperature T  
A
FORWARD VOLTAGE vs.  
AMBIENT TEMPERATURE  
OUTPUT CAPACITANCE vs.  
APPLIED VOLTAGE  
1.6  
1.4  
1.2  
250  
200  
150  
100  
50  
I = 50 mA  
F
30 mA  
20 mA  
10 mA  
5 mA  
1.0  
0.8  
1 mA  
–25  
0
25  
50  
75  
(˚C)  
100  
0
20  
40  
60  
80  
(V)  
100  
120  
Ambient Temperature T  
A
Applied Voltage V  
D
OFF-STATE LEAKAGE CURRENT vs.  
APPLIED VOLTAGE  
LOAD CURRENT vs. LOAD VOLTAGE  
10–3  
10–4  
10–5  
10–6  
10–7  
10–8  
10–9  
IF = 10 mA  
400  
200  
T
A
= 85 ˚C  
25 ˚C  
–0.4  
–0.2  
0
0.2  
0.4  
–200  
–400  
0
20  
40  
60  
80  
(V)  
100  
120  
Applied Voltage V  
D
Load Voltage V (V)  
L
Remark The graphs indicate nominal characteristics.  
7
Data Sheet PN10269EJ02V0DS  
PS7113-1A,-2A,PS7113L-1A,-2A  
NORMALIZED ON-STATE RESISTANCE vs.  
AMBIENT TEMPERATURE  
ON-STATE RESISTANCE DISTRIBUTION  
3.0  
30  
n = 50 pcs,  
Normalized to 1.0  
I
I
F
= 10 mA,  
= 10 mA  
at T = 25 ˚C,  
A
2.5  
25  
20  
15  
10  
5
L
I
I
F
= 10 mA,  
= 10 mA  
L
2.0  
1.5  
1.0  
0.5  
0.0  
0
–25  
0
25  
50  
75  
100  
0.8  
0.9  
On-state Resistance Ron (Ω)  
1.0  
Ambient Temperature T (˚C)  
A
TURN-ON TIME vs. FORWARD CURRENT  
TURN-OFF TIME vs. FORWARD CURRENT  
30  
0.30  
VO = 5 V  
VO = 5 V  
25  
20  
15  
10  
5
0.25  
0.20  
0.15  
0.10  
0.05  
0
5
10  
15  
20  
25  
30  
(mA)  
35  
40  
0
5
10  
15  
20  
25  
30  
(mA)  
35  
40  
Forward Current I  
F
Forward Current I  
F
TURN-ON TIME DISTRIBUTION  
TURN-OFF TIME DISTRIBUTION  
30  
25  
20  
15  
10  
5
30  
25  
20  
15  
10  
5
n = 50 pcs,  
n = 50 pcs,  
IF  
= 10 mA,  
= 5 V  
I
F
= 10 mA,  
= 5 V  
V
O
V
O
0
0
1.0  
1.1  
1.2  
1.3  
1.4  
1.5  
1.6  
0.02  
0.04  
0.08  
0.10  
Turn-on Time ton (ms)  
Turn-off Time toff (ms)  
Remark The graphs indicate nominal characteristics.  
8
Data Sheet PN10269EJ02V0DS  
PS7113-1A,-2A,PS7113L-1A,-2A  
NORMALIZED TURN-ON TIME vs.  
AMBIENT TEMPERATURE  
NORMALIZED TURN-OFF TIME vs.  
AMBIENT TEMPERATURE  
3.0  
2.5  
2.0  
1.5  
1.0  
3.0  
Normalized to 1.0  
Normalized to 1.0  
at T  
= 10 mA,  
= 5 V  
A
= 25 ˚C,  
at T  
= 10 mA,  
= 5 V  
A
= 25 ˚C,  
2.5  
2.0  
1.5  
1.0  
I
F
I
F
V
O
V
O
0.5  
0.0  
0.5  
0.0  
–25  
0
25  
50  
75  
(˚C)  
100  
–25  
0
25  
50  
75  
(˚C)  
100  
Ambient Temperature T  
A
Ambient Temperature T  
A
Remark The graphs indicate nominal characteristics.  
9
Data Sheet PN10269EJ02V0DS  
PS7113-1A,-2A,PS7113L-1A,-2A  
TAPING SPECIFICATIONS (in millimeters)  
Outline and Dimensions (Tape)  
2.0±0.1  
4.0±0.1  
+0.1  
1.5  
–0  
4.5 MAX.  
10.4±0.1  
4.0±0.1  
1.55±0.1  
12.0±0.1  
0.3  
Tape Direction  
PS7113L-1A-E3  
PS7113L-2A-E3  
PS7113L-1A-E4  
PS7113L-2A-E4  
Outline and Dimensions (Reel)  
2.0±0.5  
2.0±0.5  
13.0±0.2  
R 1.0  
21.0±0.8  
17.5±1.0  
21.5±1.0  
15.9 to 19.4  
Outer edge of  
flange  
Packing: 1 000 pcs/reel  
10  
Data Sheet PN10269EJ02V0DS  
PS7113-1A,-2A,PS7113L-1A,-2A  
RECOMMENDED SOLDERING CONDITIONS  
(1) Infrared reflow soldering  
• Peak reflow temperature  
260°C or below (package surface temperature)  
• Time of peak reflow temperature  
• Time of temperature higher than 220°C  
10 seconds or less  
60 seconds or less  
• Time to preheat temperature from 120 to 180°C 120±30 s  
• Number of reflows  
• Flux  
Three  
Rosin flux containing small amount of chlorine (The flux with a  
maximum chlorine content of 0.2 Wt% is recommended.)  
Recommended Temperature Profile of Infrared Reflow  
(heating)  
to 10 s  
260˚C MAX.  
220˚C  
to 60 s  
180˚C  
120˚C  
120±30 s  
(preheating)  
Time (s)  
(2) Wave soldering  
• Temperature  
• Time  
260°C or below (molten solder temperature)  
10 seconds or less  
• Preheating conditions  
• Number of times  
• Flux  
120°C or below (package surface temperature)  
One  
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine  
content of 0.2 Wt% is recommended.)  
<R>  
(3) Soldering by soldering iron  
• Peak temperature (lead part temperature)  
• Time (each pins)  
350°C or below  
3 seconds or less  
• Flux  
Rosin flux containing small amount of chlorine (The flux with a  
maximum chlorine content of 0.2 Wt% is recommended.)  
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.  
(b) Please be sure that the temperature of the package would not be heated over 100°C.  
(4) Cautions  
• Fluxes  
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.  
11  
Data Sheet PN10269EJ02V0DS  
PS7113-1A,-2A,PS7113L-1A,-2A  
<R>  
USAGE CAUTIONS  
1. Protect against static electricity when handling.  
2. Avoid storage at a high temperature and high humidity.  
12  
Data Sheet PN10269EJ02V0DS  
PS7113-1A,-2A,PS7113L-1A,-2A  
•
The information in this document is current as of July, 2006. The information is subject to change  
without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or  
data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all  
products and/or types are available in every country. Please check with an NEC Electronics sales  
representative for availability and additional information.  
• No part of this document may be copied or reproduced in any form or by any means without the prior  
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may  
appear in this document.  
•
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual  
property rights of third parties by or arising from the use of NEC Electronics products listed in this document  
or any other liability arising from the use of such products. No license, express, implied or otherwise, is  
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.  
Descriptions of circuits, software and other related information in this document are provided for illustrative  
purposes in semiconductor product operation and application examples. The incorporation of these  
circuits, software and information in the design of a customer's equipment shall be done under the full  
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by  
customers or third parties arising from the use of these circuits, software and information.  
•
• While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,  
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To  
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC  
Electronics products, customers must incorporate sufficient safety measures in their design, such as  
redundancy, fire-containment and anti-failure features.  
• NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and  
"Specific".  
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-  
designated "quality assurance program" for a specific application. The recommended applications of an NEC  
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of  
each NEC Electronics product before using it in a particular application.  
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio  
and visual equipment, home electronic appliances, machine tools, personal electronic equipment  
and industrial robots.  
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster  
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed  
for life support).  
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life  
support systems and medical equipment for life support, etc.  
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC  
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications  
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to  
determine NEC Electronics' willingness to support a given application.  
(Note)  
(1)  
"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its  
majority-owned subsidiaries.  
(2)  
"NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as  
defined above).  
M8E 02. 11-1  
13  
Data Sheet PN10269EJ02V0DS  
PS7113-1A,-2A,PS7113L-1A,-2A  
This product uses gallium arsenide (GaAs).  
Caution GaAs Products  
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe  
the following points.  
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws  
and/or ordinances, dispose of the product as recommended below.  
1. Commission a disposal company able to (with a license to) collect, transport and dispose of  
materials that contain arsenic and other such industrial waste materials.  
2. Exclude the product from general industrial waste and household garbage, and ensure that the  
product is controlled (as industrial waste subject to special control) up until final disposal.  
• Do not burn, destroy, cut, crush, or chemically dissolve the product.  
• Do not lick the product or in any way allow it to enter the mouth.  
For further information, please contact  
NEC Compound Semiconductor Devices Hong Kong Limited  
E-mail: contact@ncsd-hk.necel.com  
Hong Kong Head Office TEL: +852-3107-7303  
FAX: +852-3107-7309  
TEL: +886-2-8712-0478 FAX: +886-2-2545-3859  
TEL: +82-2-558-2120 FAX: +82-2-558-5209  
Taipei Branch Office  
Korea Branch Office  
NEC Electronics (Europe) GmbH  
http://www.eu.necel.com/  
TEL: +49-211-6503-0  
FAX: +49-211-6503-1327  
California Eastern Laboratories, Inc.  
http://www.cel.com/  
TEL: +1-408-988-3500  
FAX: +1-408-988-0279  
Compound Semiconductor Devices Division  
NEC Electronics Corporation  
URL: http://www.ncsd.necel.com/  
0604  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明