PS7122AL-2B-E4 [CEL]
6, 8-PIN DIP, 250 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch, 2-ch Optical Coupled MOS FET;型号: | PS7122AL-2B-E4 |
厂家: | CALIFORNIA EASTERN LABS |
描述: | 6, 8-PIN DIP, 250 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch, 2-ch Optical Coupled MOS FET 瞄准线 |
文件: | 总15页 (文件大小:381K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Solid State Relay
OCMOS FET
PS7122A-1B,-2B,PS7122AL-1B,-2B
6, 8-PIN DIP, 250 V BREAK DOWN VOLTAGE
NORMALLY CLOSE TYPE
−NEPOC Series−
1-ch, 2-ch Optical Coupled MOS FET
DESCRIPTION
The PS7122A-1B, -2B and PS7122AL-1B, -2B are solid state relays containing GaAs LEDs on the light emitting
side (input side) and normally close (N.C.) contact MOS FETs on the output side.
They are suitable for analog signal control because of their low offset and high linearity.
The PS7122AL-1B, -2B have a surface mount type lead.
FEATURES
•
•
•
•
•
•
1 channel type (1 b output) or 2 channel type (1 b + 1 b output)
Low LED operating current (IF = 2 mA)
Designed for AC/DC switching line changer
Small package (6, 8-pin DIP)
Low offset voltage
Ordering number of taping product : PS7122AL-1B-E3, E4: 1 000 pcs/reel
: PS7122AL-2B-E3, E4: 1 000 pcs/reel
Pb-Free product
<R>
•
•
Safety standards
• UL approved: File No. E72422
• BSI approved: No. 8245/8246
• CSA approved: No. CA 101391
APPLICATIONS
•
•
•
Exchange equipment
Measurement equipment
FA/OA equipment
Document No. PN10274EJ02V0DS (2nd edition)
Date Published July 2006 NS CP(K)
1997, 2006
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
PS7122A-1B,-2B,PS7122AL-1B,-2B
PACKAGE DIMENSIONS (in millimeters)
PS7122A-1B
PS7122AL-1B
TOP VIEW
TOP VIEW
6
5
4
6
5
4
9.25±0.5
9.25±0.5
1
2
3
1
2
3
1. LED Anode
2. LED Cathode
3. NC
1. LED Anode
2. LED Cathode
3. NC
4. MOS FET Drain
5. MOS FET Source
6. MOS FET Drain
4. MOS FET Drain
5. MOS FET Source
6. MOS FET Drain
7.62
6.5±0.5
6.5±0.5
0.9±0.25
9.60±0.4
2.54
1.34±0.1
0.25 M
0 to 15˚
0.5±0.1
1.34±0.1
2.54
0.25 M
PS7122A-2B
PS7122AL-2B
TOP VIEW
TOP VIEW
9.25±0.5
9.25±0.5
6
5
4
6
5
4
8
7
8
7
1
2
3
1
2
3
1. LED Anode
2. LED Cathode 6. MOS FET
3. LED Anode
7. MOS FET
5. MOS FET
1. LED Anode
2. LED Cathode 6. MOS FET
3. LED Anode
7. MOS FET
4. LED Cathode 8. MOS FET
5. MOS FET
4. LED Cathode 8. MOS FET
7.62
6.5±0.5
6.5±0.5
0.9±0.25
9.60±0.4
2.54
1.34±0.1
0.25 M
0 to 15˚
0.5±0.1
1.34±0.1
0.25 M
2.54
2
Data Sheet PN10274EJ02V0DS
PS7122A-1B,-2B,PS7122AL-1B,-2B
<R>
MARKING EXAMPLE
PS7122A-1B
PS7122A-2B
No. 1 pin
Mark
No. 1 pin
Mark
Country Assembled
Type Number
Assembly Lot
Country Assembled
Type Number
Assembly Lot
PS7122A-1B
NL601
PS7122A-2B
NL601
N L 6 01
N L 6 01
Week Assembled
Week Assembled
Year Assembled
(Last 1 Digit)
Year Assembled
(Last 1 Digit)
In-house Code
(L: Pb-Free)
In-house Code
(L: Pb-Free)
Rank Code
Rank Code
3
Data Sheet PN10274EJ02V0DS
PS7122A-1B,-2B,PS7122AL-1B,-2B
<R>
ORDERING INFORMATION
Part Number
Order Number
Solder Plating
Specification
Packing Style
Safety Standard Application Part
Approval
Number*1
PS7122A-1B
PS7122AL-1B
PS7122A-1B-A
PS7122AL-1B-A
Pb-Free
Magazine case 50 pcs
Standard products PS7122A-1B
(UL, BSI, CSA
PS7122AL-1B-E3 PS7122AL-1B-E3-A
PS7122AL-1B-E4 PS7122AL-1B-E4-A
Embossed Tape 1 000 pcs/reel approved)
PS7122A-2B
PS7122AL-2B
PS7122A-2B-A
PS7122AL-2B-A
Magazine case 50 pcs
PS7122A-2B
PS7122AL-2B-E3 PS7122AL-2B-E3-A
PS7122AL-2B-E4 PS7122AL-2B-E4-A
Embossed Tape 1 000 pcs/reel
*1 For the application of the Safety Standard, following part number should be used.
4
Data Sheet PN10274EJ02V0DS
PS7122A-1B,-2B,PS7122AL-1B,-2B
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Ratings
PS7122A-1B, PS7122A-2B,
Parameter
Symbol
Unit
PS7122AL-1B PS7122AL-2B
Diode
Forward Current (DC)
Reverse Voltage
IF
VR
PD
IFP
VL
IL
50
5.0
50
mA/ch
V
Power Dissipation
mW/ch
A/ch
V
Peak Forward Current *1
1
MOS FET Break Down Voltage
250
200
Continuous
Connection A
Connection B
Connection C
mA/ch
Load Current *2
350
500
−
−
Pulse Load Current *3
(AC/DC Connection)
ILP
400
mA/ch
Power Dissipation
Isolation Voltage *4
PD
BV
PT
560
610
375
850
mW/ch
Vr.m.s.
mW
1 500
Total Power Dissipation
Operating Ambient Temperature
Storage Temperature
TA
−40 to +85
°C
Tstg
−40 to +100
°C
*1 PW = 100 µs, Duty Cycle = 1%
*2 Conditions: IF ≥ 2 mA. The following types of load connections are available.
6
1
Connection A
Connection B
Connection C
2
3
5
V
L
L
(AC/DC)
(DC)
I
L
L
L
L
4
6
5
+
–
1
2
3
V
I
4
6
1
2
3
–
+
5
4
V
L
L
(DC)
(DC)
I
L
L
L
6
5
I
+
–
L
1
2
3
V
I
L
+ I
L
I
L
4
*3 PW = 100 ms, 1 shot
*4 AC voltage for 1 minute at T = 25°C, RH = 60% between input and output
A
Pins 1-3 shorted together, 4-6 shorted together. (PS7122A-1B)
Pins 1-4 shorted together, 5-8 shorted together. (PS7122A-2B)
5
Data Sheet PN10274EJ02V0DS
PS7122A-1B,-2B,PS7122AL-1B,-2B
RECOMMENDED OPERATING CONDITIONS (TA = 25°C)
Parameter
LED Operating Current
LED Off Voltage
Symbol
MIN.
TYP.
10
MAX.
20
Unit
mA
V
IF
2
0
VF
0.5
ELECTRICAL CHARACTERISTICS (TA = 25°C)
Parameter
Symbol
VF
Conditions
MIN.
TYP.
1.2
MAX.
1.4
Unit
V
Diode
Forward Voltage
Reverse Current
IF = 10 mA
VR = 5 V
IR
5.0
µA
µA
MOS FET Off-state Leakage
Current
ILoff
IF = 10 mA, VD = 250 V
0.03
340
1.0
Output Capacitance
Cout
IFoff
Ron1
Ron2
ton
IF = 10 mA, VD = 0 V, f = 1 MHz
IL = 200 mA
pF/ch
mA
Ω
Coupled
LED Off-state Current
On-state Resistance
2.0
8.0
IF = 0 mA, IL = 10 mA
4.5
IF = 0 mA, IL = 200 mA, t ≤ 10 ms
Turn-on Time *1, 2
IF = 10 mA, VO = 5 V, RL = 500 Ω,
PW ≥ 10 ms
0.04
0.5
0.2
1.5
ms
Turn-off Time *1, 2
toff
Isolation Resistance
Isolation Capacitance
RI-O
CI-O
VI-O = 1.0 kVDC
109
Ω
V = 0 V, f = 1 MHz
1.1
pF/ch
*1 Test Circuit for Switching Time
I
F
Input
50 %
Pulse Input
V
V
L
0
V
O
= 5 V
Output
90 %
10 %
Input monitor
O
monitor
Rin
RL
t
on
t
off
<R>
*2 The turn-on time and turn-off time are specified as input-pulse width ≥ 10 ms.
Be aware that when the device operates with an input-pulse width less than 10 ms, the turn-on time and turn-off
time will increase.
6
Data Sheet PN10274EJ02V0DS
PS7122A-1B,-2B,PS7122AL-1B,-2B
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
MAXIMUM FORWARD CURRENT vs.
AMBIENT TEMPERATURE
MAXIMUM LOAD CURRENT vs.
AMBIENT TEMPERATURE
100
80
300
200
100
0
60
40
20
0
7585
(˚C)
100
85
–25
0
25
50
75
100
–25
0
25
50
Ambient Temperature T
A
Ambient Temperature T
A
(˚C)
FORWARD VOLTAGE vs.
AMBIENT TEMPERATURE
OUTPUT CAPACITANCE vs.
APPLIED VOLTAGE
1.6
1.4
1.2
400
300
200
100
f = 1 MHz
I = 50 mA
F
30 mA
20 mA
10 mA
5 mA
1.0
0.8
1 mA
–25
0
25
50
75
(˚C)
100
0
20
40
60
80
(V)
100
120
Ambient Temperature T
A
Applied Voltage V
D
OFF-STATE LEAKAGE CURRENT vs.
APPLIED VOLTAGE
LOAD CURRENT vs. LOAD VOLTAGE
10–5
10–6
10–7
10–8
10–9
IF = 10 mA
IF = 0 mA
200
100
TA = 85 ˚C
–2.0
–1.0
0
1.0
2.0
25 ˚C
–100
–200
0
50
100
150
200
250
Applied Voltage V
D
(V)
Load Voltage V (V)
L
Remark The graphs indicate nominal characteristics.
7
Data Sheet PN10274EJ02V0DS
PS7122A-1B,-2B,PS7122AL-1B,-2B
NORMALIZED ON-STATE RESISTANCE vs.
AMBIENT TEMPERATURE
ON-STATE RESISTANCE DISTRIBUTION
30
3.0
n = 50 pcs,
Normalized to 1.0
I
I
F
= 0 mA,
= 10 mA
at T = 25 ˚C,
A
25
20
15
10
5
2.5
2.0
1.5
1.0
0.5
0.0
L
I
I
F
= 0 mA,
= 10 mA
L
0
4.7
–25
0
25
50
75
100
4.3
4.4
4.6
4.5
On-state Resistance Ron (Ω)
Ambient Temperature T
A
(˚C)
TURN-ON TIME vs. FORWARD CURRENT
TURN-OFF TIME vs. FORWARD CURRENT
0.6
12
VO = 5 V
VO = 5 V
0.5
0.4
0.3
0.2
0.1
10
8
6
4
2
0
5
10
15
20
(mA)
25
30
0
5
10
15
20
(mA)
25
30
Forward Current I
F
Forward Current I
F
TURN-ON TIME DISTRIBUTION
TURN-OFF TIME DISTRIBUTION
30
25
20
15
10
5
30
25
n = 50 pcs,
n = 50 pcs,
I
F
= 10 mA,
= 5 V
I
F
= 10 mA,
= 5 V
V
O
V
O
20
15
10
5
0
0
0.4
0.6
0.04
0.05
Turn-on Time ton (ms)
Turn-off Time toff (ms)
Remark The graphs indicate nominal characteristics.
8
Data Sheet PN10274EJ02V0DS
PS7122A-1B,-2B,PS7122AL-1B,-2B
NORMALIZED TURN-OFF TIME vs.
AMBIENT TEMPERATURE
NORMALIZED TURN-ON TIME vs.
AMBIENT TEMPERATURE
3.0
2.5
2.0
1.5
1.0
0.5
0.0
3.0
Normalized to 1.0
Normalized to 1.0
at T
A
= 25 ˚C,
at T
A
= 25 ˚C,
2.5
2.0
1.5
1.0
0.5
0.0
I
F
= 10 mA, V = 5 V
O
I
F
= 10 mA, V = 5 V
O
–25
0
25
50
75
(˚C)
100
–25
0
25
50
75
(˚C)
100
Ambient Temperature T
A
Ambient Temperature T
A
Remark The graphs indicate nominal characteristics.
9
Data Sheet PN10274EJ02V0DS
PS7122A-1B,-2B,PS7122AL-1B,-2B
TAPING SPECIFICATIONS (in millimeters)
Outline and Dimensions (Tape)
2.0±0.1
4.0±0.1
+0.1
1.5
–0
4.5 MAX.
10.4±0.1
4.0±0.1
1.55±0.1
12.0±0.1
0.3
Tape Direction
PS7122AL-1B-E3
PS7122AL-2B-E3
PS7122AL-1B-E4
PS7122AL-2B-E4
Outline and Dimensions (Reel)
2.0±0.5
2.0±0.5
13.0±0.2
R 1.0
21.0±0.8
17.5±1.0
21.5±1.0
15.9 to 19.4
Outer edge of
flange
Packing: 1 000 pcs/reel
10
Data Sheet PN10274EJ02V0DS
PS7122A-1B,-2B,PS7122AL-1B,-2B
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
• Peak reflow temperature
260°C or below (package surface temperature)
10 seconds or less
• Time of peak reflow temperature
• Time of temperature higher than 220°C
60 seconds or less
• Time to preheat temperature from 120 to 180°C 120±30 s
• Number of reflows
• Flux
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260˚C MAX.
220˚C
to 60 s
180˚C
120˚C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
• Temperature
• Time
260°C or below (molten solder temperature)
10 seconds or less
• Preheating conditions
• Number of times
• Flux
120°C or below (package surface temperature)
One
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
<R>
(3) Soldering by soldering iron
• Peak temperature (lead part temperature)
• Time (each pins)
350°C or below
3 seconds or less
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
11
Data Sheet PN10274EJ02V0DS
PS7122A-1B,-2B,PS7122AL-1B,-2B
<R>
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
12
Data Sheet PN10274EJ02V0DS
PS7122A-1B,-2B,PS7122AL-1B,-2B
•
The information in this document is current as of July, 2006. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or
data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all
products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
• No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
•
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
•
• While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
• NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1)
"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2)
"NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E 02. 11-1
13
Data Sheet PN10274EJ02V0DS
PS7122A-1B,-2B,PS7122AL-1B,-2B
This product uses gallium arsenide (GaAs).
Caution GaAs Products
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
For further information, please contact
NEC Compound Semiconductor Devices Hong Kong Limited
E-mail: contact@ncsd-hk.necel.com
Hong Kong Head Office TEL: +852-3107-7303
FAX: +852-3107-7309
TEL: +886-2-8712-0478 FAX: +886-2-2545-3859
TEL: +82-2-558-2120 FAX: +82-2-558-5209
Taipei Branch Office
Korea Branch Office
NEC Electronics (Europe) GmbH
http://www.eu.necel.com/
TEL: +49-211-6503-0
FAX: +49-211-6503-1327
California Eastern Laboratories, Inc.
http://www.cel.com/
TEL: +1-408-988-3500
FAX: +1-408-988-0279
Compound Semiconductor Devices Division
NEC Electronics Corporation
URL: http://www.ncsd.necel.com/
0604
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Concentration Limit per RoHS
(values are not yet fixed)
Concentration contained
in CEL devices
-A
-AZ
(*)
Lead (Pb)
Mercury
< 1000 PPM
< 1000 PPM
< 100 PPM
< 1000 PPM
< 1000 PPM
< 1000 PPM
Not Detected
Not Detected
Cadmium
Hexavalent Chromium
PBB
Not Detected
Not Detected
Not Detected
Not Detected
PBDE
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.
相关型号:
PS7122AL-2B-E4-A
6, 8-PIN DIP, 250 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch, 2-ch Optical Coupled MOS FET
CEL
©2020 ICPDF网 联系我们和版权申明