PS8302L2-V-E3 [CEL]
1 Mbps, HIGH CMR, ANALOG OUTPUT TYPE, 8 mm CREEPAGE 6-PIN SDIP PHOTOCOUPLER;
| 型号： | PS8302L2-V-E3 |
| 厂家： | 
CALIFORNIA EASTERN LABS |
| 描述： | 1 Mbps, HIGH CMR, ANALOG OUTPUT TYPE, 8 mm CREEPAGE 6-PIN SDIP PHOTOCOUPLER 输出元件 |
| 文件： | 总16页 (文件大小：614K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PHOTOCOUPLER
PS8302L,PS8302L2
1 Mbps, HIGH CMR, ANALOG OUTPUT TYPE,
8 mm CREEPAGE 6-PIN SDIP PHOTOCOUPLER
−NEPOC Series−
DESCRIPTION
The PS8302L and PS8302L2 are optical coupled isolators containing a GaAlAs LED on the input side and a PIN
photodiode and a high-speed amplifier transistor on the output side on one chip.
The PS8302L and PS8302L2 are designed specifically for high supply voltage and high common mode transient
immunity (CMR).
The PS8302L and PS8302L2 are in 6-pin plastic SDIP (Shrink Dual In-line Package). The PS8302L2 has 8 mm
creepage distance and is half size of 8-pin DIP.
The PS8302L is lead bending type (Gull-wing) for surface mounting.
The PS8302L2 is lead bending type for long creepage distance (Gull-wing) for surface mount.
FEATURES
•
•
•
•
•
•
•
•
High common mode transient immunity (CMH, CML = ±15 kV/µs MIN.)
Half size of 8-pin DIP
PIN CONNECTION
(Top View)
Long creepage distance (8 mm MIN. : PS8302L2)
High supply voltage (VCC = 35 V)
6
5
4
1. Anode
2. NC
3. Cathode
4. GND
High isolation voltage (BV = 5 000 Vr.m.s.)
High-speed response (tPHL = 0.8 µs MAX., tPLH = 0.8 µs MAX.)
Pb-Free product
5. V
O
6. VCC
Safety standards
•
•
•
UL approved: No. E72422
CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950)
DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40024069 (Option)
<R>
1
2
3
APPLICATIONS
•
•
•
•
Computer and peripheral manufactures
General purpose inverter
Substitutions for relays and pulse transformers
Power supply
Document No. PN10688EJ05V0DS (5th edition)
Date Published June 2009 NS
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
PS8302L,PS8302L2
PACKAGE DIMENSIONS (UNIT: mm)
Lead Bending Type (Gull-wing) For Surface Mount
PS8302L
4.58±0.3
(0.82)
9.7±0.3
7.62
±2.015
1.27
0.25 M
0.8±0.25
0.4±0.1
Lead Bending Type For Long Creepage Distance (Gull-wing) For Surface Mount
PS8302L2
4.58±0.3
(0.82)
11.5±0.3
7.62
±2.015
1.27
0.25 M
0.75±0.25
0.4±0.1
2
Data Sheet PN10688EJ05V0DS
PS8302L,PS8302L2
<R>
MARKING EXAMPLE
Type Number
Assembly Lot
8302
N931
No. 1 pin Mark
N
9
31
Week Assembled
Year Assembled
(Last 1 Digit)
Rank Code
PHOTOCOUPLER CONSTRUCTION
Parameter
Air Distance (MIN.)
PS8302L
PS8302L2
8 mm
7 mm
7 mm
Outer Creepage Distance (MIN.)
Isolation Distance (MIN.)
8 mm
0.4 mm
0.4 mm
ORDERING INFORMATION
Part Number
Order Number
Solder Plating
Specification
Packing Style
Safety Standard
Approval
Application Part
Number*1
PS8302L
PS8302L-AX
Pb-Free
20 pcs (Tape 20 pcs cut)
Standard products
PS8302L
PS8302L2
PS8302L
PS8302L2
PS8302L-E3
PS8302L2
PS8302L-E3-AX
PS8302L2-AX
(Ni/Pd/Au)
Embossed Tape 2 000 pcs/reel (UL, CSA approved)
20 pcs (Tape 20 pcs cut)
PS8302L2-E3
PS8302L-V
PS8302L-V-E3
PS8302L2-V
PS8302L2-E3-AX
PS8302L-V-AX
PS8302L-V-E3-AX
PS8302L2-V-AX
Embossed Tape 2 000 pcs/reel
20 pcs (Tape 20 pcs cut)
DIN EN60747-5-2
Embossed Tape 2 000 pcs/reel (VDE0884 Part2)
20 pcs (Tape 20 pcs cut)
Approved (Option)
PS8302L2-V-E3 PS8302L2-V-E3-AX
Embossed Tape 2 000 pcs/reel
*1 For the application of the Safety Standard, following part number should be used.
3
Data Sheet PN10688EJ05V0DS
PS8302L,PS8302L2
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter
Symbol
IF
Ratings
Unit
mA
V
Diode
Forward Current*1
Reverse Voltage
Supply Voltage
Output Voltage
Output Current
Power Dissipation*2
25
VR
5
Detector
VCC
VO
35
35
V
V
IO
8
mA
mW
Vr.m.s.
°C
PC
100
Isolation Voltage*3
BV
TA
5 000
Operating Ambient Temperature
Storage Temperature
–55 to +110
–55 to +125
Tstg
°C
*1 Reduced to 0.3 mA/°C at TA = 70°C or more.
*2 Reduced to 2.0 mW/°C at TA = 75°C or more.
*3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-3 shorted together, 4-6 shorted together.
4
Data Sheet PN10688EJ05V0DS
PS8302L,PS8302L2
ELECTRICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
<R>
Parameter
Symbol
Conditions
MIN.
TYP.*1
1.6
MAX.
2.0
Unit
V
Diode
Forward Voltage
Reverse Current
VF
IR
IF = 16 mA
VR = 3 V
10
µA
Forward Voltage
Temperature Coefficient
∆VF/∆TA IF = 16 mA
−2.1
mV/°C
Terminal Capacitance
Ct
IOH (1)
IOH (2)
VOL
V = 0 V, f = 1 MHz
30
3
pF
nA
µA
V
Detector
High Level Output Current
High Level Output Current
Low Level Output Voltage
High Level Supply Current
Low Level Supply Current
Current Transfer Ratio
IF = 0 mA, VCC = VO = 5.5 V
IF = 0 mA, VCC = VO = 35 V
IF = 16 mA, VCC = 4.5 V, IO = 2.4 mA
IF = 0 mA, VO = open, VCC = 35 V
IF = 16 mA, VO = open, VCC = 35 V
IF = 16 mA, VCC = 4.5 V, VO = 0.4 V
VI-O = 1 kVDC
500
100
0.4
1
0.15
0.01
150
ICCH
µA
ICCL
Coupled
CTR
RI-O
15
%
1011
Ω
Input-Output
Isolation Resistance
Input-Output
CI-O
V = 0 V, f = 1 MHz
0.7
pF
Isolation Capacitance
Propagation Delay Time
IF = 16 mA, VCC = 5 V, RL = 1.9 kΩ
tPHL
tPLH
0.3
0.8
0.8
µs
(H → L)*2
Propagation Delay Time
0.33
(L → H) *2
Common Mode
IF = 0 mA, VCC = 5 V, RL = 4.1 kΩ,
VCM = 1.5 kV
CMH
15
kV/µs
Transient Immunity at
High Level Output*3
Common Mode
IF = 16 mA, VCC = 5 V, RL = 4.1 kΩ,
VCM = 1.5 kV
CML
−15
Transient Immunity at
Low Level Output*3
5
Data Sheet PN10688EJ05V0DS
PS8302L,PS8302L2
*1 Typical values at TA = 25°C
*2 Test circuit for propagation delay time
VCC = 5 V
Input
Pulse Input
PW = 100
I
F
50%
R
L
= 1.9 kΩ
1
2
3
6
5
4
µ
s
)
(
Duty Cycle = 1/10
VO (Monitor)
5 V
µ
0.1 F
Output
I
F
Monitor
SHIELD
1.5 V
51 Ω
VOL
t
PHL
t
PLH
*3 Test circuit for common mode transient immunity
V
CM = 1.5 kV
90%
90%
V
CC = 5 V
V
CM
10%
10%
I
F
0 V
R
L
= 4.1 kΩ
1
2
3
6
5
4
t
r
t
f
SW
A
VO (Monitor)
B
µ
0.1 F
V
OH
CM
H
SW: B (I = 0 mA)
F
SHIELD
2 V
V
CM
0.8 V
CM
+
−
L
V
OL
SW: A (I = 16 mA)
F
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static
electricity when handling.
2. By-pass capacitor of 0.1 µF is used between VCC and GND near device. Also, ensure that the distance between
the leads of the photocoupler and capacitor is no more than 10 mm.
3. Pin 2 (which is an NC*1 pin) can either be connected directly to the GND pin on the LED side or left open.
Unconnected pins should not be used as a bypass for signals or for any other similar purpose because this may
degrade the internal noise environment of the device.
<R>
*1 NC: Not connected (No connection)
4. Avoid storage at a high temperature and high humidity.
6
Data Sheet PN10688EJ05V0DS
PS8302L,PS8302L2
<R>
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
MAXIMUM FORWARD CURRENT
vs. AMBIENT TEMPERATURE
DETECTOR POWER DISSIPATION
vs. AMBIENT TEMPERATURE
120
100
80
30
25
20
15
10
5
60
40
20
0
0
25
Ambient Temperature T
50
75
100 110 125
(°C)
25
50
75
100 110 125
(°C)
A
Ambient Temperature T
A
FORWARD CURRENT vs.
FORWARD VOLTAGE
OUTPUT CURRENT vs.
OUTPUT VOLTAGE
12
10
8
100
10
I
F
= 25 mA
20 mA
15 mA
10 mA
5 mA
T
A
= +110°C
+100°C
+85°C
+50°C
+25°C
0°C
6
1.0
4
0.1
–40°C
2
0.01
1.0
1.2
1.4
1.6
1.8
2.0
(V)
2.2
2.4
0
2
4
6
8
10 12 14 16 18 20
Forward Voltage V
F
Output Voltage V (V)
O
CURRENT TRANSFER RATIO
vs. FORWARD CURRENT
NORMALIZED CURRENT TRANSFER
RATIO vs. AMBIENT TEMPERATURE
50
2
1.8
1.6
1.4
1.2
Normalized to 1.0
V
V
CC = 4.5 V,
= 0.4 V
at T
A
= 25°C,
O
I
F
= 16 mA, VCC = 4.5 V,
40
30
20
10
VO
= 0.4 V
1
0.8
0.6
0.4
0.2
0
0
0.1
1
10
(mA)
100
–75 –50 –25
0
25
50 75 100 125
Forward Current I
F
Ambient Temperature T (°C)
A
Remark The graphs indicate nominal characteristics.
7
Data Sheet PN10688EJ05V0DS
PS8302L,PS8302L2
OUTPUT VOLTAGE vs.
FORWARD CURRENT
HIGH LEVEL OUTPUT CURRENT
vs. AMBIENT TEMPERATURE
1 000
100
10
7
6
5
I
F
= 0 mA
V
CC = 5 V
I
F
V
CC
R
L
V
V
CC = V
CC = V
O
O
= 35 V
= 5.5 V
4
3
RL = 1.9 kΩ
2
1
1
5.5 kΩ
12 kΩ
0.1
0
2
4
6
8
10 12 14 16 18 20
–25
0
25
50
75
(°C)
100
Forward Current I (mA)
F
Ambient Temperature T
A
PROPAGATION DELAY TIME,
vs. LORD RESISTANCE
PROPAGATION DELAY TIME,
vs. AMBIENT TEMPERATURE
3
10
V
CC = 5 V,
= 16 mA
V
CC = 5 V,
= 16 mA,
IF
IF
2.5
2
RL = 1.9 kΩ
t
PLH
1
1.5
1
t
PLH
t
PHL
0.5
t
PHL
0.1
0
1
10
Load Resistance R
100
–50 –25
0
25
50
75
100 125
L
(kΩ)
Ambient Temperature T
A
(°C)
Remark The graphs indicate nominal characteristics.
8
Data Sheet PN10688EJ05V0DS
PS8302L,PS8302L2
<R>
TAPING SPECIFICATIONS (UNIT: mm)
Outline and Dimensions (Tape)
2.0±0.1
+0.1
4.0±0.1
1.5
–0
4.5 MAX.
+0.1
1.5
–0
0.35
8.0±0.1
5.08±0.1
Tape Direction
PS8302L-E3
Outline and Dimensions (Reel)
2.0±0.5
2.0±0.5
13.0±0.2
R 1.0
21.0±0.8
17.5±1.0
21.5±1.0
15.9 to 19.4
Outer edge of
flange
Packing: 2 000 pcs/reel
9
Data Sheet PN10688EJ05V0DS
PS8302L,PS8302L2
Outline and Dimensions (Tape)
2.0±0.1
+0.1
4.0±0.1
1.5
–0
4.5 MAX.
+0.1
2.0
–0
8.0±0.1
0.35
5.08±0.1
Tape Direction
PS8302L2-E3
Outline and Dimensions (Reel)
2.0±0.5
2.0±0.5
13.0±0.2
R 1.0
21.0±0.8
25.5±1.0
29.5±1.0
23.9 to 27.4
Outer edge of
flange
Packing: 2 000 pcs/reel
10
Data Sheet PN10688EJ05V0DS
PS8302L,PS8302L2
<R>
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)
D
A
Part Number
PS8302L
Lead Bending
A
B
C
D
lead bending type (Gull-wing)
for surface mount
8.2
1.27
1.27
0.8
2.2
lead bending type (Gull-wing)
for long creepage distance (surface mount)
10.2
0.8
2.2
PS8302L2
11
Data Sheet PN10688EJ05V0DS
PS8302L,PS8302L2
<R>
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature
260°C or below (package surface temperature)
• Time of peak reflow temperature
• Time of temperature higher than 220°C
10 seconds or less
60 seconds or less
• Time to preheat temperature from 120 to 180°C 120±30 s
• Number of reflows
• Flux
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260°C MAX.
220°C
to 60 s
180°C
120°C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
• Temperature
• Time
260°C or below (molten solder temperature)
10 seconds or less
• Preheating conditions
• Number of times
• Flux
120°C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
• Peak temperature (lead part temperature)
• Time (each pins)
350°C or below
3 seconds or less
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
12
Data Sheet PN10688EJ05V0DS
PS8302L,PS8302L2
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute
maximum ratings.
13
Data Sheet PN10688EJ05V0DS
PS8302L,PS8302L2
<R>
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Parameter
Symbol
Spec.
Unit
Climatic test class (IEC 60068-1/DIN EN 60068-1)
55/110/21
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and random test)
Upr = 1.5 × UIORM, Pd < 5 pC
UIORM
1 130
1 695
Vpeak
Upr
Vpeak
Test voltage (partial discharge test, procedure b for all devices)
Upr
2 119
Vpeak
Vpeak
Upr = 1.875 × UIORM, Pd < 5 pC
Highest permissible overvoltage
UTR
8 000
2
Degree of pollution (DIN EN 60664-1 VDE0110 Part 1)
Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11))
Material group (DIN EN 60664-1 VDE0110 Part 1)
Storage temperature range
CTI
175
III a
Tstg
TA
–55 to +125
–55 to +110
°C
°C
Operating temperature range
Isolation resistance, minimum value
VIO = 500 V dc at TA = 25°C
Ris MIN.
Ris MIN.
1012
1011
Ω
Ω
VIO = 500 V dc at TA MAX. at least 100°C
Safety maximum ratings (maximum permissible in case of fault, see thermal
derating curve)
Package temperature
Tsi
Isi
175
400
700
°C
mA
mW
Current (input current IF, Psi = 0)
Power (output or total power dissipation)
Isolation resistance
Psi
VIO = 500 V dc at TA = Tsi
Ris MIN.
109
Ω
14
Data Sheet PN10688EJ05V0DS
PS8302L,PS8302L2
This product uses gallium arsenide (GaAs).
Caution GaAs Products
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or i any way allow it to enter the mouth.
NOTICE
1.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and
application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. California
Eastern Laboratories and Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits,
software, or information.
2.
3.
California Eastern Laboratories has used reasonable care in preparing the information included in this document, but California Eastern Laboratories does
not warrant that such information is error free. California Eastern Laboratories and Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
California Eastern Laboratories and Renesas Electronics do not assume any liability for infringement of patents, copyrights, or other intellectual property
rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express,
implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of California Eastern Laboratories or Renesas
Electronics or others.
4.
5.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. California Eastern
Laboratories and Renesas Electronics assume no responsibility for any losses incurred by you or third parties arising from such alteration, modification, copy
or otherwise misappropriation of Renesas Electronics product.
Renesas Electronics products are classified according to the following two quality grades: “Standard” and “High Quality”. The recommended applications
for each Renesas Electronics product depends on the product’s quality grade, as indicated below. “Standard”: Computers; office equipment; communications
equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and
industrial robots etc. “High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime
systems; and safety equipment etc. Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct
threat to human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear
reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application for which it is not intended. California Eastern Laboratories and Renesas
Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product
for which the product is not intended by California Eastern Laboratories or Renesas Electronics.
6.
7.
You should use the Renesas Electronics products described in this document within the range specified by California Eastern Laboratories, especially with
respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product
characteristics. California Eastern Laboratories shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products
beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as
the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation
resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by
fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy,
fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of
microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you.
Please contact a California Eastern Laboratories sales office for details as to environmental matters such as the environmental compatibility of each Renesas
Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of
controlled substances, including without limitation, the EU RoHS Directive. California Eastern Laboratories and Renesas Electronics assume no liability for
damages or losses occurring as a result of your noncompliance with applicable laws and regulations.
Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations. You should not use Renesas Electronics products or technology described in this document
for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. When
exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and
regulations and follow the procedures required by such laws and regulations.
8.
9.
10. It is the responsibility of the buyer or distributor of California Eastern Laboratories, who distributes, disposes of, or otherwise places the Renesas Electronics
product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, California Eastern Laboratories and
Renesas Electronics assume no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics products.
11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of California Eastern Laboratories.
12. Please contact a California Eastern Laboratories sales office if you have any questions regarding the information contained in this document or Renesas
Electronics products, or if you have any other inquiries.
NOTE 1: “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.
NOTE 2: “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
NOTE 3: Products and product information are subject to change without notice.
CEL Headquarters • 4590 Patrick Henry Drive, Santa Clara, CA 95054 • Phone (408) 919-2500 • www.cel.com
For a complete list of sales offices, representatives and distributors,
Please visit our website: www.cel.com/contactus
相关型号：
PS8302L2-V-E3-AX
Linear IC Output Optocoupler, 1-Element, 5000V Isolation, 1MBps, LEAD FREE, PLASTIC, SDIP-6
NEC
©2020 ICPDF网 联系我们和版权申明