THEVAF84C [CEL]

LVDS Single Link Evaluation Board;


型号：	THEVAF84C
厂家：	CALIFORNIA EASTERN LABS
描述：	LVDS Single Link Evaluation Board
文件：	总10页 (文件大小：1261K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

To Our Customers

Continuing it’s rich tradition of partnering with high quality

Japanese semiconductor suppliers, CEL is now partnering with

THine from May of 2015 onwards.

www.cel.com

THAN0184_Rev.1. 0_E

THC63LVDM83D / THC63LVDF(R)84C Evaluation Kit

LVDS Single Link Evaluation Board

Parts Number: THEVAM83D, THEVAF(R)84C

1.General Description

2. Features

THEVAM83D and, THEVAF(R)84C boards are

designed to support video data transmission

between the host and display. One high-speed lane

can carry up to 24bits data and 3bits of

synchronizing signals at a pixel clock frequency

from 8MHz to 160MHz.

Compatible with TIA/EIA-644 LVDS Standard

7:1 LVDS Transmitter and Receiver

Single power supply

Power Down Mode

< THEVAM83D>

LVDS swing is reducible as 200mV by RS-pin

to reduce EMI and power consumption.

Input clock triggering edge is selectable by

R/F-pin

< THEVAF84C> Falling Edge Clock

< THEVAR84C> Rising Edge Clock

Table 1 Clock Frequency

Type

Parts Number

THEVAM83D

THEVAF(R)84C

TTL Clock Freq.

8MHz to 160MHz

8MHz to 112MHz

3. Overview

(a) THEVAM83D (Top Side)

(b) THEVAF(R)84C (Top Side)

Figure 1 THEVAM83D and THEVAF(R)84C Top Side View

(a) THEVAM83D (Bottom Side)

(b)THEVAF(R)84C (Bottom Side)

Figure 2 THEVAM83D and THEVAF(R)84C Bottom Side View

THine Electronics, Inc.

Security

1/9

THAN0184_Rev.1. 0_E

4. Power Supply Set Up

This chapter shows power supply condition.

Caution: Please check if there is no power-GND short on below red trace before supplying any power.

3.3V Power Supply to Each Board

Each evaluation board require 3.3V power supply. Please use “CON1” connector typically.

Ground

3.3V Power Supply

(a)THEVAM83D

(b) THEVAF(R)84C

Figure 3 Power Supply for Evaluation Board

Power Supply from / to Connector

3.3V power supply can be connected to Header1 and CON2 by using W1 and W2solder jumper.

THEVAM83D

W1: Connect the 3.3V power supply with pin#29 and 30 of CON2.

W2: Connect the 3.3V power supply with pin#1, 2 and 3 of Header1.

Figure 4 THEVAM83D Power Supply from / to Each Connector

THine Electronics, Inc.

Security

2/9

THAN0184_Rev.1. 0_E

THEVAF(R)84C

W1: Connect the 3.3V power supply with pin#1, 2 and 3 of Header1.

W2: Connect the 3.3V power supply with pin#1 and 2 of CON2.

Figure 5 THEVAF(R)84C Power Supply from / to Each Connect

5. Function Setting

Setting pin of each boards are shown in yellow area of figure 6. HEADER is connected to IC’s setting pin.

Each setting pin’s high or low setting can set by connecting HEADER and high level or low level.

(a)THEVAM83D

(b) THEVAF(R)84C

Figure 6 Position of Function Setting Pin

High setting

High side

Connected with

IC s setting pin

Low side

Low setting

Figure 7 High / Low Setting Description

THine Electronics, Inc.

Security

3/9

THAN0184_Rev.1. 0_E

5. Function

This chapter shows function setting of THEVAM83D and THEVAF(R)84C.

Table 2 THEVAM83D Function Setting Description

Silk

Symbol

Function

Input clock triggering edge select input for latching input

data

H: Rising edge L: Falling edge

LVDS Swing Mode.

LVDS

Swing

Small Swing

Input Support

VCC

0.6 to 1.4V

GND

350mV

200mV

N/A

RS=V_REF

N/A

V_REF: is Input Reference Voltage

Power down input.

PWDN

H: Normal operation L: Power down

Table 3 THEVAF(R)84C Function Setting Description

Silk

Symbol

Function

Power down input.

PWDN

H: Normal Operation L: Power Down

THine Electronics, Inc.

Security

4/9

THAN0184_Rev.1. 0_E

6. Schematic

C C V

D N G

Figure 8 THEVAM83D Schematic

THine Electronics, Inc.

Security

5/9

THAN0184_Rev.1. 0_E

C C V

D N G

Figure 9 THEVAF(R)84C Schematic

THine Electronics, Inc.

Security

6/9

THAN0184_Rev.1. 0_E

7. Bills of Materials

Table 4 THEVAM83D BOM

TYPE

Capacitor

Connector

Header

Value / Part No.

Package

2012

1005

SPEC

Reference No.

C1, C2, C3, C4

C5, C6, C7, C12

C8, C9, C10, C11

CON1

CON2

Header1

Header2, Header3, Header4

IC1

Qty.

10uF

0.1uF

0.01uF

16V

2pin

1005

282836-2(NC)

52271-3069(NC)

PCN10-48P-2.54DSA_LEFT(NC)

3HEAD(NC)

THC63LVDM83D

MPZ1608R471A

SML-310MT

5mm_pitch

1mm_pitch

2.54mm_pitch

TSSOP56

1608

30pin

48pin

---

Inductor

LED0

---

1.2A

GREEN

L1, L2, L3

1608

Table 5 THEVAF(R)84C BOM

TYPE

Capacitor

Value / Part No.

10uF

0.1uF

Package

2012

1005

SPEC

Reference No.

C1, C2, C3, C4

C5, C6, C7, C12

Qty.

16V

0.01uF

C8, C9, C10, C11

PCN10-48P-2.54DSA_RIGHT(N

Connector

2.54mm_pitch

48pin

Header1

Connector

Header

Inductor

LED0

52271-3069(NC)

282836-2(NC)

3HEAD(NC)

THC63LVDF(R)84C

MPZ1608R471A

SML-310MT

1mm_pitch

5mm_pitch

2.54mm_pitch

TSSOP56

1608

30pin

2pin

---

1.2A

GREEN

CON2

CON1

Header2

IC1

L1, L2, L3

1608

R2, R3, R4, R5, R8, R11, R13, R14,

R16, R17, R18, R19, R21, R24, R26,

R27, R29, R30, R31, R32, R33, R34,

R36, R38, R39, R40, R41, R42, R43

THine Electronics, Inc.

Security

7/9

THAN0184_Rev.1. 0_E

8. Set items

Table 6 Set Items

TYPE

Part No.

282836-2

DC Connector

52271-3069

98267-0475

---

FFC Connector for LVDS Link

FFC 30pin 1mm pitch for LVDS Link

Pin Header

It's possible to mount these parts on this board and use.

THine Electronics, Inc.

Security

8/9

THAN0184_Rev.1. 0_E

9. Notices and Requests

Please kindly read, understand and accept this “Notes and Requests” before using this product.

For the Material:

1. The product specifications described in this material are subject to change without prior notice.

2. The circuit diagrams described in this material are examples of the application which may not always

apply to design of respective customers. THine Electronics, Inc. (“THine”) is not responsible for

possible errors and omissions in this material. Please note if the errors or omissions should be found in

this material, THine may not be able to correct them immediately.

3. This material contains THine’s copyright, know-how or other proprietary. Copying or disclosing of the

contents of this material to any third party without THine’s prior permission is strictly prohibited.

For the Product:

1. This product is solely designed for evaluation purpose, and other purposes including mass production

and distribution are not intended.

2. This product has been solely manufactured for electric design engineers but not for end-users.

3. This product is not radiation-tolerant product.

4. This product is presumed to be used for general electric device, not for applications which require

extremely high-reliability/safety (including medical device concerned with critical care, aerospace

device, or nuclear power control device). Also, when using this product for any device concerned with

control and/or safety of transportation mean, traffic signal device, or other various types of safety

device, such use must be after applying appropriate measures to the product.

5. This product has been designed with the utmost care to accomplish the purpose of evaluation of IC

products manufactured by THine Electronics, Inc., however, THine MAKES NO WARRANTIES OR

REPRESENTATIONS WITH REGARD TO ANY PERFORMANCE OR FUNCTION OF THIS

PRODUCT IN ANY CIRCUMSTANCE.

6. This product has been manufactured with the utmost care in quality control and product reliability,

however, there may be faults or defects with a low but fixed probability, as inevitable phenomenon

concerned with semiconductor manufacturing processes. Therefore, Customers are encouraged to have

sufficiently redundant or error-preventive design applied to the use of the product so as not to have

THine’s product cause any social or public damage. Replacement of the product is only available in

case of obvious defects of mount devices at the point of unpacking the product. Neither replacement

nor failure analysis of the product is available in any other case of defects with the product and/or the

product’s components.

7. Customers are asked, if required, to judge by themselves on whether this product falls under the

category of strategic goods under the Foreign Exchange and Foreign Trade Control Law.

8. Please Note that if infringement of any third party’s industrial ownership should occur by using this

product, THine will be exempted from any responsibility unless it directly relates to the production

process or functions of the product.

9. Developing, designing and manufacturing of Customers’ own products, equipments or system by using

of this product is strictly prohibited in any way.

THine Electronics, Inc.

sales@thine.co.jp

THine Electronics, Inc.

Security

9/9

THEVAF84C [CEL]

相关型号：

THEVAFR84C

THEVAM83D

THF106J006P1G

THF106K035P1F

THF106K050P1F

THF107J006P1F

THF107J006P1G

THF107J010P1F

THF107J015P1F

THF107J015P1G

THF107J020P1F

THF107J020P1G