MP101302 [CHERRY]

Hall-effect position sensor with convenient snap-fit mounting;


型号：	MP101302
厂家：	CHERRY SEMICONDUCTOR CORPORATION
描述：	Hall-effect position sensor with convenient snap-fit mounting
文件：	总2页 (文件大小：250K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Magnetic Proximity Sensors (Hall Effect)

MP1013 Sensors

Hall-effect position sensor with convenient snap-fit mounting

Description

The MP1 Series sensors are one-piece non-contact solid-state position sensors. The sensors operate through the use of Hall Effect

technology with magnetic fields generated by permanent magnets. They provide a sinking current output.

Features

Typical Applications

•

Solid state reliability

•

Door position & interlock

Limit switch

Flow/speed

Stable output over operating temperature range

Open collector (NPN) output can be used with bipolar or CMOS

logic circuits with suitable pull-up resistor

South pole sensitive

Home security

Pedal switch

•

Unipolar device (MP101301, MP101302)

Latching version available (MP101303)

RoHS compliant

Fastener-less design

IP67

Environmental Specifications

Operating / Storage Temperature (MP101301, MP101303)

Operating / Storage Temperature (MP101302)

Ingress Protection

-40 °C to 85 ⁰C (-40 ⁰F to 185 ⁰F)

-40 ⁰C to 125 °C (-40 ⁰F to 257 ⁰F)

IP67

Electrical Specifications

Operating Supply Voltage

5 to 24 VDC

4.1 mA typ., 7.5 mA max.

2.6 mA typ., 5 mA max.

25 mA max.

20 mA max.

30 VDC

Supply Current (MP101301, MP101302)

Supply Current (MP101303)

Output Current (Sink) (MP101301, MP101302)

Output Current (Sink) (MP101303)

Maximum Input Voltage (MP101301, MP101302)

Maximum Input Voltage (MP101303)

Maximum Reverse Voltage (MP101301, MP101302)

Maximum Reverse Voltage (MP101303)

Recommended Pull-Up Resistor

28 VDC

30 VDC

None

See chart

Mechanical Specifications

Housing Material

Glass-reinforced nylon plastic

245 Gauss / 60 Gauss

60 Gauss / 60 Gauss

Turn on / off (MP101301, MP101302)

Turn on / off (MP101303)*

*MP101303 is a latching sensor and releases when 60 Gauss is applied to the north pole

www.cherryswitches.com

Page 1 of 2, Last update 2016-01-05, Specifications subject to change without notice.

Products

Part Number

MP101301

Leads

24 AWG x 150 mm

MP101302*

MP101303*

*Not commonly stocked

Note: An external pull-up resistor is required, the value of which is dependent on the supply voltage. The resistor should be connected

between the output and Vcc. Refer to the wiring diagram for lead colors or pin numbering as applicable.

Recommended External Pull-Up Resistor

Volts DC

Ohms

1.8k

2.4k

Open Collector Sinking Block Diagram

Dimensions mm (inches)

www.cherryswitches.com

Page 2 of 2, Last update 2016-01-05, Specifications subject to change without notice.

相关型号：