首页 |元器件品牌

CHB150W12-72S05-C [CINCON]

150 WATT 12:1 INPUT ISOLATED DC-DC CONVERTER;
CHB150W12-72S05-C
型号： CHB150W12-72S05-C
厂家： Cincon    Cincon
描述：

150 WATT 12:1 INPUT ISOLATED DC-DC CONVERTER

DC-DC转换器 输入元件
文件： 总8页 (文件大小：709K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
CHB150W12 SERIES  
150 WATT 12:1 INPUT  
ISOLATED DC-DC CONVERTER  
Features  
ꢀ Efficiency Up to 91%  
ꢀ Fixed Switching Frequency  
ꢀ Regulated Outputs  
ꢀ Remote On/Off  
ꢀ Fully protected (OTP/OCP/OVP/UVLO)  
ꢀ 3000Vac I/O Isolation  
℃
ꢀ Operating Case Temperature -40 to +100  
ꢀ Half Brick Size Meet Industrial Standard  
2.28×2.40x0.50  
ꢀ CB Test Certificate IEC62368-1  
ꢀ EN50155 Compliant with External Circuits  
ꢀ UL62368-1 2nd (Reinforce Insulation) Approval  
ꢀ Shock & Vibration EN50155 (EN61373) Compliant  
ꢀ Fire & Smoke EN45545-2 Compliant  
ꢀ 5000m Operating Altitude  
OUTPUTCURRENT  
INPUT CURRENT  
% EFF.  
MODEL  
INPUT  
OUTPUT  
CAPACITOR  
LOADMAX.  
NUMBER  
VOLTAGE  
VOLTAGE  
MIN.  
MAX.  
NO LOAD FULLLOAD (1)  
(2)  
CHB150W12-72S05 14-160 VDC  
CHB150W12-72S12 14-160 VDC  
CHB150W12-72S15 14-160 VDC  
CHB150W12-72S24 14-160 VDC  
CHB150W12-72S48 14-160 VDC  
5 VDC  
12 VDC  
15 VDC  
24 VDC  
48 VDC  
0 mA  
0 mA  
0 mA  
0 mA  
0 mA  
25 A  
12.5 A  
10 A  
50 mA  
50 mA  
50 mA  
50 mA  
50 mA  
1929 mA  
2289 mA  
2315 mA  
2341 mA  
2370 mA  
90  
91  
90  
89  
90  
90  
90  
90  
89  
89  
25000uF  
16700uF  
10000uF  
6250µF  
1500µF  
6.25 A  
3.2 A  
NOTE:  
1. Nominal Input Voltage 72 VDC  
2. Measured at Input Voltage 110 VDC  
3. An External Input Capacitor 100uF for All Models are Recommended to Reduce Input Ripple Voltage  
4. An External Electrolytic Capacitor at least 240uF connected between BUS and -Vin is necessary  
PART NUMBER  
Nominal Input  
Number of  
Outputs  
O
Nominal Output  
Voltage  
Remote On/Off  
Series  
Mounting Inserts  
-Y (Option)  
Voltage  
II  
Logic  
L
CHB150W12-  
XX  
05:  
5VDC  
12: 12VDC  
15: 15VDC  
24: 24VDC  
48: 48VDC  
None:  
M3x0.5 Mounting  
Inserts  
None: Positive  
N: Negative  
CHB150W12  
72: 72 VDC  
S: Single  
-C: Clear Mounting  
Inserts (3.2mm DIA.)  
Part Number Example:  
CHB150W12-72S12N-C: Half Brick, 150W, 12:1 14-160Vdc Input, Single 12Vdc Output, Negative Logic, Clear Mounting Insert  
www.cincon.com  
1
REVISION: V10  
CHB150W12 Serie
TECHNICAL SPECIFICATIONS  
(All specifications are typical at nominal input, full load at 25°C unless otherwise noted.)  
ABSOLUTE MAXIMUM RATINGS  
PARAMETER  
NOTES and CONDITIONS  
Device  
Min.  
Typ.  
Max.  
Units  
Input Voltage  
Continuous  
-0.3  
160  
180  
100  
125  
Vdc  
Vdc  
°C  
°C  
All  
All  
All  
All  
Input Surge Voltage  
Operating Case Temperature  
Storage Temperature  
100ms max.  
At the Center Part of Base Plate  
-40  
-55  
INPUT CHARACTERISTICS  
PARAMETER  
NOTES and CONDITIONS  
Device  
Min.  
Typ.  
Max.  
Units  
Operating Input Voltage  
Input Under Voltage Lockout  
Turn-On Voltage Threshold  
Turn-Off Voltage Threshold  
Lockout Hysteresis Voltage  
Maximum Input Current  
No-Load Input Current  
Input Filter  
Vdc  
All  
14  
72  
160  
Vdc  
Vdc  
Vdc  
A
All  
All  
All  
All  
12.5  
10.5  
13  
11  
2
13.5  
11.5  
Vin=16.5V, Full Load.  
Vin=72V, Io=0A  
12  
mA  
See Model Number Table  
Pi filter.  
All  
All  
All  
2
Inrush Current (I t)  
2
A s  
As per ETS300 132-2.  
P-P thru 12uH inductor, 5Hz to 20MHz.  
0.1  
Input Reflected Ripple Current  
mA  
50  
OUTPUT CHARACTERISTICS  
PARAMETER  
NOTES and CONDITIONS  
Device  
Min.  
Typ.  
Max.  
Units  
Voltage Set Point Accuracy  
Output Voltage Regulation  
Load Regulation  
Vin=72V, Full Load, Tc=25°C  
%
All  
-1.0  
+1.0  
Full Load to No Load  
%
%
All  
All  
All  
0.2  
0.2  
Line Regulation  
Vin=High Line to Low Line, Full Load  
Tc=-40°C to 100°C  
Temperature Coefficient  
%/°C  
0.02  
Output Voltage Ripple and Noise (5Hz to 20MHz bandwidth)  
5Vo  
12Vo  
15Vo  
24Vo  
48Vo  
5Vo  
150  
200  
200  
240  
240  
60  
Peak-to-Peak  
mV  
Full load, 10uF tantalum and 1uF ceramic  
capacitors (for Vo=48V: Full Load 10uF  
aluminum and 1uF ceramic capacitors).  
12Vo  
15Vo  
24Vo  
48Vo  
80  
RMS.  
mV  
60  
100  
100  
Vin= 16.5 to 160V  
See Model Number Table  
See Model Number Table,Full Load 10S  
Output Current Range  
A
Vin= 14 to 16.5V  
Over Current Protection  
Short Circuit Protection  
External Load Capacitance  
Output Voltage Trim Range  
<90% Vo  
%
All  
All  
110  
125  
140  
Hiccup Mode. Auto Recovery.  
Full load (Constant resistive load)  
Po≦max rated power, Io ≦ Io_max  
Continuous, Auto Recovery.  
uF  
%
See Model Number Table  
-20  
All  
All  
All  
+15  
+15  
140  
Po≦max rated power, Io ≦ Io_max  
Output Voltage Remote Sense  
Range  
%
%
% of nominal Vo  
Over Voltage Protection  
Limited Voltage, % of Nominal Vo  
117  
125  
www.cincon.com  
2
REVISION: V10  
CHB150W12 Serie
EFFICIENCY  
PARAMETER  
NOTES and CONDITIONS  
Device  
Min.  
Typ.  
Max.  
Units  
100% Load  
Vin=72V, 110V  
%
See Model Number Table  
DYNAMIC CHARACTERISTICS  
PARAMETER  
NOTES and CONDITIONS  
Device  
Min.  
Typ.  
Max.  
Units  
Output Voltage Current Transient  
Error Band  
75% to 100% of Io_max step load change  
di/dt=0.1A/us  
%
All  
All  
5
Recovery Time  
us  
250  
(within 1% Vout nominal)  
Turn-On Delay and Rise Time  
Full load (Constant resistive load)  
Von/off to 10%Vo_set, Remote On  
Turn-On Delay Time, From On/Off  
Control  
ms  
All  
100  
Turn-On Delay Time, From Input  
Output Voltage Rise Time  
Vin_min to 10%Vo_set, Power Up  
10%Vo_set to 90%Vo_set  
ms  
ms  
All  
All  
100  
100  
ISOLATION CHARACTERISTICS  
PARAMETER  
NOTES and CONDITIONS  
Device  
Min.  
Typ.  
Max.  
Units  
Vac  
Vdc  
Vac  
Vdc  
Vac  
Vdc  
MΩ  
3000  
4200  
3000  
4200  
500  
1 minute; Input to Output,  
All  
Isolation Voltage  
(100% factory Hi-Pot tested  
@2sec.)  
1 minute; Input to Case (Base Plate),  
1 minute; Output to Case (Base Plate)  
All  
All  
700  
Isolation Resistance  
Isolation Capacitance  
Input to Output  
All  
All  
All  
All  
100  
Input to Output  
500  
None  
2000  
Input to Case (Base Plate)  
Output to Case (Base Plate)  
pF  
FEATURE CHARACTERISTICS  
PARAMETER  
NOTES and CONDITIONS  
Output Ripple Frequency  
Device  
Min.  
Typ.  
Max.  
Units  
Switching Frequency  
All  
KHz  
432  
480  
528  
On/Off Control, Positive Remote On/Off logic, Refer to –Vin pin.  
Logic Low (Module Off)  
Logic High (Module On)  
Von/off at Ion/off=1.0mA  
All  
All  
V
V
0
1.2  
Von/off at Ion/off=0.0uA, Pin open=On  
3.5  
160  
On/Off Control, Negative Remote On/Off logic, Refer to –Vin pin  
Logic High (Module Off)  
Logic Low (Module On)  
Von/off at Ion/off=0.0uA, Pin open=Off  
Von/off at Ion/off=1.0mA  
All  
All  
V
V
3.5  
0
160  
1.2  
On/Off Current (for both remote  
on/off logic)  
Ion/off at Von/off=0V  
All  
All  
mA  
uA  
0.3  
1
Leakage Current (for both remote  
on/off logic)  
Logic High, Von/off=15V  
30  
20  
Off Converter Input Current  
Over Temperature Shutdown  
Over Temperature Recovery  
Shutdown input idle current  
All  
All  
All  
mA  
°C  
15  
105  
95  
Temperature at the Center Part of Base  
Plate, Non-Latching  
°C  
GENERAL SPECIFICATIONS  
PARAMETER  
NOTES and CONDITIONS  
Device  
Min.  
Typ.  
Max.  
Units  
72S05  
72S12  
72S15  
72S24  
72S48  
All  
455  
495  
545  
655  
565  
105  
Io=100% of Io_max  
;
K
MTBF  
MIL-HDBK - 217F_Notice 1, GB, 25°C  
hours  
Weight  
grams  
www.cincon.com  
3
REVISION: V10  
CHB150W12
Serie
Case Material  
Plastic, DAP, UL 94V-0  
Aluminum  
Base plate Material  
Potting Material  
UL 94V-0  
Base: Copper  
Plating: Nickel with Matte Tin  
Pin Material  
Shock/Vibration  
Humidity  
MIL-STD-810F/EN61373 Compliant  
95% RH max. Non Condensing  
Altitude  
5000m Operating Altitude, 12000m Transport Altitude  
MIL-STD-810F  
Thermal Shock  
Fire & Smoke  
EMI  
EN45545-2 Compliant  
Meets EN55032 & EN50155 Compliant (with external filter)  
Class A  
ESD  
EN61000-4-2  
Level 3: Air ±8kV, Contact ±6kV  
Level 3: 80~1000MHz, 20V/m  
Perf. Criteria A  
Perf. Criteria A  
Radiated immunity  
EN61000-4-3  
EN61000-4-4  
Level 3: On power input port, ±2kV, external input capacitor  
required,  
Fast Transient  
Perf. Criteria A  
Surge  
EN61000-4-5  
EN61000-4-6  
EN50155  
Level 4: Line to earth, ±4kV, Line to line, ±2kV  
Level 3: 0.15~80MHz, 10V  
Perf. Criteria A  
Perf. Criteria A  
Perf. Criteria A  
Perf. Criteria A  
Conducted immunity  
Interruptions of Voltage Supply  
Supply Change Over  
Application Note Link  
Packaging Information Link  
Class S3: 20ms interruptions  
EN50155  
Class C2: During a supply break of 30ms,  
CHB150W12-72S Series App Notes  
Packaging Information  
Immunity to Environmental Conditions.  
EN50155; 2017  
Reference Clause(s)  
Phenomenon  
Reference Standard  
Test Conditions  
Result  
Class OT6  
Temperature: -40℃  
Duration: 2 hrs  
Class OT6 & Cycle A (ST0)  
Temperature: 85℃  
Low Temperature  
Start-up test  
13.4.4  
EN 60068-2-1  
EN 60068-2-2  
Pass  
Dry Heat Test  
13.4.5  
Duration: 6 hrs  
Pass  
Extended temperature: 100℃  
Extended Duration: 10min  
Temperature: -40℃  
Duration: 16 hrs  
Temperature: 25℃ - 55℃  
Humidity: 90% RH  
Low Temperature  
Storage Test  
13.4.6  
13.4.7  
EN 60068-2-1  
EN 60068-2-30  
Pass  
Pass  
Cyclic Damp Heat Test  
Duration: 48 hrs  
Temperature: 20℃ +/- 3℃  
Humidity: 66% +/-5% RH  
Frequency range: 5 ~ 150 Hz  
2
⁄
Random Vibration Test  
13.4.11  
EN 61373  
EN 61373  
Vertical: 1.01 푚 푠  
Pass  
Pass  
2
⁄
⁄
Transverse: 1.01 푚 푠  
Longitudinal: 1.01 푚 푠  
Duration: 10 min / axis  
Temperature: 20℃ +/-3℃  
2
Humidity: 66% +/-5% RH  
Frequency range: 5 ~ 150 Hz  
Simulated Long Life Test at  
Increased Random Vibration 13.4.11  
Levels  
2
⁄
Vertical: 5.72 푚 푠  
2
⁄
⁄
Transverse: 5.72 m s  
Longitudinal: 5.72 푚 푠  
2
Duration: 5 hrs / axis  
Temperature: 20℃ +/-3℃  
Humidity: 66% +/-5% RH  
Frequency range: 5 ~ 150 Hz  
2
⁄
+/-Vertical: 50 m s  
Shock Test  
13.4.11  
EN 61373  
Pass  
2
⁄
⁄
+/-Transverse: 50 푚 푠  
2
+/-Longitudinal: 50 푚 푠  
Duration: 30ms x18 (Each axis 3  
shocks)  
www.cincon.com  
4
REVISION: V10  
CHB150W12
Serie
EN45545-2 Fire & Smoke Test Conditions.  
Item  
Standard  
EN 45545-2: 2013  
Hazard Level  
HL1, HL2, HL3  
HL1, HL2  
Oxygen Index Test  
EN ISO 4589-2: 2006  
EN 45545-2: 2013  
EN ISO 5659-2: 2013  
EN 45545-2: 2013  
NF X70-100: 2006  
EN 45545-2: 2013  
EN ISO 4589-2: 2006  
EN 45545-2: 2013  
EN ISO 5659-2: 2013  
EN 45545-2: 2013  
NF X70-100: 2006  
EN45545-2: 2013  
EN ISO 4589-2  
R22  
R23  
Smoke Density Test  
Smoke Toxicity Test  
Oxygen Index Test  
Smoke Density Test  
Smoke Toxicity Test  
Oxygen Index Test  
Glow - Wire Test  
HL1, HL2, HL3  
HL1, HL2, HL3  
HL1, HL2, HL3  
HL1, HL2, HL3  
HL1, HL2, HL3  
HL1, HL2, HL3  
HL1, HL2, HL3  
R24  
R25  
R26  
EN 45545-2:2013  
EN 60695-2-11:2001  
EN 45545-2: 2013  
EN 60695-11-10: 2013  
Vertical Flame Test  
CHARACTERISTIC CURVE  
Simplified Application Circuit  
Power Derating Curve  
CHB150W12-72S Derating Curve  
with Heatsink HBT254 (Vin=72V)  
CHB150W12-72S Derating Curve  
without Heatsink (Vin=72V)  
110  
100  
90  
80  
70  
60  
50  
40  
30  
20  
10  
0
110  
100  
90  
80  
70  
60  
50  
40  
30  
20  
10  
0
Natural  
100 ft./min.  
200 ft./min.  
300 ft./min.  
400 ft./min.  
Natural  
100 ft./min.  
200 ft./min.  
300 ft./min.  
400 ft./min.  
0
10 20 30 40 50 60 70 80 90 100 110  
0
10 20 30 40 50 60 70 80 90 100 110  
Ambient Temperature (℃)  
Ambient Temperature (℃)  
www.cincon.com  
5
REVISION: V10  
CHB150W12 Serie
CHB150W12-72S Derating Curve  
with Heatsink HBT127 (Vin=72V)  
Typical Derating Curve VS Input Voltage  
110  
100  
90  
80  
70  
60  
50  
40  
30  
20  
10  
0
125%  
100%  
75%  
50%  
25%  
0%  
Natural  
100 ft./min.  
200 ft./min.  
300 ft./min.  
400 ft./min.  
16.5V  
14V  
160V  
0
10 20 30 40 50 60 70 80 90 100 110  
Input Voltage (V)  
Ambient Temperature (℃)  
Performance Data  
CHB150W12-72S05  
Eff Vs Io @25 Deg. C  
CHB150W12-72S05  
Pd Vs Po @25 Deg. C  
95%  
90%  
85%  
80%  
75%  
70%  
65%  
50  
45  
40  
35  
30  
25  
20  
15  
10  
5
14V  
24V  
48V  
72V  
110V  
160V  
14V  
24V  
48V  
72V  
110V  
160V  
0
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%  
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%  
Current Load (%)  
Output Power (%)  
CHB150W12-72S12  
Eff Vs Io @25 Deg. C  
CHB150W12-72S12  
Pd Vs Po @25 Deg. C  
95%  
50  
45  
40  
35  
30  
25  
20  
15  
10  
5
14V  
90%  
85%  
80%  
75%  
70%  
65%  
24V  
48V  
72V  
110V  
160V  
14V  
24V  
48V  
72V  
110V  
160V  
0
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%  
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%  
Current Load (%)  
Output Power (%)  
www.cincon.com  
6
REVISION: V10  
CHB150W12 Serie
CHB150W12-72S15  
Eff Vs Io @25 Deg. C  
CHB150W12-72S15  
Pd Vs Po @25 Deg. C  
95%  
90%  
85%  
80%  
75%  
70%  
65%  
60%  
50  
45  
40  
35  
30  
25  
20  
15  
10  
5
14V  
24V  
48V  
72V  
110V  
160V  
14V  
24V  
48V  
72V  
110V  
160V  
0
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%  
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%  
Current Load (%)  
Output Power (%)  
CHB150W12-72S24  
Eff Vs Io @25 Deg. C  
CHB150W12-72S24  
Pd Vs Po @25 Deg. C  
95%  
50  
45  
40  
35  
30  
25  
20  
15  
10  
5
14V  
90%  
85%  
80%  
75%  
70%  
65%  
60%  
24V  
48V  
72V  
110V  
160V  
14V  
24V  
48V  
72V  
110V  
160V  
0
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%  
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%  
Current Load (%)  
Output Power (%)  
CHB150W12-72S48  
Eff Vs Io @25 Deg. C  
CHB150W12-72S48  
Pd Vs Po @25 Deg. C  
95%  
50  
45  
40  
35  
30  
25  
20  
15  
10  
5
14V  
90%  
85%  
80%  
75%  
70%  
65%  
60%  
24V  
48V  
72V  
110V  
160V  
14V  
24V  
48V  
72V  
110V  
160V  
0
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%  
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%  
Current Load (%)  
Output Power (%)  
www.cincon.com  
7
REVISION: V10  
CHB150W12 Serie
MECHANICAL SPECIFICATION  
Mounting Inserts  
BOTTOM VIEW  
M3X0.5 Through 4PI  
0.18 [4.60]min  
0.50[12.70]  
PIN Function  
1
2
+V Input  
6
7
UVLO  
Sync  
3
5
4
8
9
On/Off  
4
5
BUS  
-V Input  
-V Output  
-Sense  
Trim  
6
3
2
7
10  
11  
8
9
1
+Sense  
+V Output  
10  
11  
1.90 [48.26]  
2.28 [57.90]  
All Dimensions In Inches[mm]  
Tolerance Inches:x.xx= 0.02, x.xxx= 0.010  
Millimeters:x.x= 0.5, x.xx= 0.25  
8
REVISION: V10  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明