首页 |元器件品牌

CQB75-300S15 [CINCON]

75 WATT 2:1 INPUT ISOLATED DC-DC CONVERTER;
CQB75-300S15
型号： CQB75-300S15
厂家： Cincon    Cincon
描述：

75 WATT 2:1 INPUT ISOLATED DC-DC CONVERTER

DC-DC转换器 输入元件
文件： 总8页 (文件大小：400K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
CQB75-300S SERIES  
75 WATT 2:1 INPUT  
ISOLATED DC-DC CONVERTER  
Features  
⚫ Efficiency Up to 90%  
⚫ Fixed Switching Frequency  
⚫ Regulated Outputs  
⚫ Remote On/Off  
⚫ Low No Load Power Consumption  
⚫ Fully protected (OTP/OCP/OVP/UVLO)  
⚫ 3000Vac I/O Isolation  
℃
⚫ Operating Case Temperature -40 to +105  
⚫ Quarter Brick Size Meet Industrial Standard  
2.28”x1.45”x0.5”  
⚫ Safety Meets IEC/EN/UL 62368-1 2nd  
(Reinforce Insulation)  
⚫ Shock & Vibration MIL-STD-810F Compliant  
⚫ Fire & Smoke EN45545 Compliant  
⚫ 3000m Operating Altitude  
OUTPUT CURRENT  
INPUT CURRENT  
MODEL  
INPUT  
OUTPUT  
CAPACITOR  
LOAD MAX.  
% EFF.  
NUMBER  
VOLTAGE  
VOLTAGE  
MIN.  
MAX.  
NO LOAD FULL LOAD  
10 mA  
10 mA  
10 mA  
10 mA  
10 mA  
CQB75-300S05 180-450 VDC  
CQB75-300S12 180-450 VDC  
CQB75-300S15 180-450 VDC  
CQB75-300S24 180-450 VDC  
CQB75-300S48 180-450 VDC  
5 VDC  
12 VDC  
15 VDC  
24 VDC  
48 VDC  
0 mA  
0 mA  
0 mA  
0 mA  
0 mA  
15 A  
6.25 A  
5 A  
305 mA  
281 mA  
281 mA  
281 mA  
281 mA  
82  
88  
90  
90  
89  
15000μF  
6250μF  
5000μF  
3300μF  
1000μF  
3.12 A  
1.56 A  
NOTE:  
1. Nominal Input Voltage 300 VDC  
2. Measured at 300Vin  
3. An External Input Capacitor 33uF for All Models are Recommended to Reduce Input Ripple Voltage  
PART NUMBER  
Nominal Input  
Number of  
Outputs  
O
Nominal Output  
Voltage  
Remote On/Off  
Series  
Mounting Inserts  
-Y (Option)  
Voltage  
Logic  
L
CQB75  
II  
XX  
05: 5.0VDC  
12: 12VDC  
15: 15VDC  
24: 24VDC  
48: 48VDC  
None: M3x0.5 Mounting  
Inserts  
None: Positive  
N: Negative  
CQB75  
300  
S: Single  
-C: Clear Mounting  
Insert (3.2mm DIA.)  
Part Number Example:  
CQB75-300S12N-C: Quarter Brick, 75W, 2:1 180-450Vdc Input, Single 12Vdc Output, Negative Logic, Clear Mounting Insert  
www.cincon.com  
1
REVISION: V10  
CQB75-300S Serie
TECHNICAL SPECIFICATIONS  
(All specifications are typical at nominal input, full load at 25°C unless otherwise noted.)  
ABSOLUTE MAXIMUM RATINGS  
PARAMETER  
NOTES and CONDITIONS  
Device  
Min.  
Typ.  
Max.  
Units  
Input Voltage  
Continuous  
-0.3  
450  
500  
105  
125  
Vdc  
Vdc  
°C  
°C  
All  
All  
All  
All  
Input Surge Voltage  
Operating Case Temperature  
Storage Temperature  
100ms max.  
At the Center Part of Base Plate  
-40  
-55  
INPUT CHARACTERISTICS  
PARAMETER  
NOTES and CONDITIONS  
Device  
Min.  
Typ.  
Max.  
Units  
Operating Input Voltage  
Vdc  
All  
180  
300  
450  
Input Under Voltage Lockout  
Turn-On Voltage Threshold  
Turn-Off Voltage Threshold  
Lockout Hysteresis Voltage  
Vdc  
Vdc  
Vdc  
All  
All  
165  
155  
170  
160  
10  
175  
165  
All  
05Vo  
Others  
520  
477  
Maximum Input Current  
Vin=180V, Full Load.  
mA  
mA  
No-Load Input Current  
Input Filter  
Vin=300V, Io=0A  
See Model Number Table  
Pi filter.  
All  
All  
All  
2
Inrush Current (I t)  
2
A s  
As per ETS300 132-2.  
P-P thru 12uH inductor, 5Hz to 20MHz.  
0.1  
Input Reflected Ripple Current  
mA  
30  
OUTPUT CHARACTERISTICS  
PARAMETER  
NOTES and CONDITIONS  
Device  
Min.  
Typ.  
Max.  
Units  
Voltage Set Point Accuracy  
Output Voltage Regulation  
Load Regulation  
Vin=300V, Full Load, Tc=25°C  
%
All  
-1.0  
+1.0  
Full Load to No Load  
%
%
All  
All  
All  
0.2  
0.2  
Line Regulation  
Vin=High Line to Low Line, Full Load  
Tc=-40°C to 105°C  
Temperature Coefficient  
%/°C  
0.02  
Output Voltage Ripple and Noise (5Hz to 20MHz bandwidth)  
05Vo  
12Vo  
15Vo  
24Vo  
48Vo  
05Vo  
12Vo  
15Vo  
24Vo  
48Vo  
100  
150  
150  
240  
480  
60  
Peak-to-Peak  
mV  
Output ripple and noise measured with an  
external MLCC 1000pF connected between  
–Vin to Case, and 10uF aluminum and 1uF  
ceramic capacitor across output for 48Vout,  
and with 10uF tantalum and 1uF ceramic  
capacitor for others.  
60  
RMS.  
mV  
60  
100  
200  
Output Current Range  
Over Current Protection  
Short Circuit Protection  
External Load Capacitance  
Vin= 180 to 450V  
A
See Model Number Table  
110 135  
Hiccup Mode. Auto Recovery.  
%
All  
All  
160  
Continuous, Auto Recovery.  
Full load (resistive)  
uF  
%
%
%
%
%
%
See Model Number Table  
05Vo  
Others  
05Vo  
All  
-20  
-20  
+10  
+20  
+10  
+20  
130  
130  
Po≦max rated power, Io ≦ Io_max  
Output Voltage Trim Range  
Po≦max rated power, Io ≦ Io_max  
Output Voltage Remote Sense  
Range  
% of nominal Vo  
05Vo  
Others  
112  
122  
Over Voltage Protection  
Limited Voltage, % of Nominal Vo  
www.cincon.com  
2
REVISION: V10  
CQB75-300S Serie
EFFICIENCY  
PARAMETER  
NOTES and CONDITIONS  
Device  
Min.  
Typ.  
Max.  
Units  
100% Load  
Vin=300V, Full Load.  
%
See Model Number Table  
DYNAMIC CHARACTERISTICS  
PARAMETER  
NOTES and CONDITIONS  
Device  
Min.  
Typ.  
Max.  
Units  
Output Voltage Current Transient  
Error Band  
75% to 100% of Io_max step load change  
di/dt=0.1A/us  
%
All  
All  
5
Recovery Time  
us  
250  
(within 1% Vout nominal)  
Turn-On Delay and Rise Time  
Full load (Constant resistive load)  
Von/off to 10%Vo_set, Remote On  
Turn-On Delay Time, From On/Off  
Control  
ms  
All  
30  
Turn-On Delay Time, From Input  
Output Voltage Rise Time  
Vin_min to 10%Vo_set, Power Up  
10%Vo_set to 90%Vo_set  
ms  
ms  
All  
All  
30  
30  
ISOLATION CHARACTERISTICS  
PARAMETER  
NOTES and CONDITIONS  
Device  
Min.  
Typ.  
Max.  
Units  
Vac  
Vdc  
Vac  
Vdc  
Vac  
Vdc  
MΩ  
3000  
4200  
2500  
3500  
500  
1 minute; Input to Output,  
All  
Isolation Voltage  
(100% factory Hi-Pot tested  
@2sec.)  
1 minute; Input to Case (Base Plate),  
1 minute; Output to Case (Base Plate)  
All  
All  
700  
Isolation Resistance  
Isolation Capacitance  
Input to Output  
All  
All  
All  
All  
100  
Input to Output  
333  
None  
4400  
Input to Case (Base Plate)  
Output to Case (Base Plate)  
pF  
FEATURE CHARACTERISTICS  
PARAMETER  
NOTES and CONDITIONS  
Pulse wide modulation (PWM), Fixed  
Device  
Min.  
Typ.  
Max.  
Units  
Switching Frequency  
All  
KHz  
270  
300  
330  
On/Off Control, Positive Remote On/Off logic, Refer to –Vin pin.  
Logic Low (Module Off)  
Logic High (Module On)  
Von/off at Ion/off=1.0mA  
All  
All  
V
V
0
1.2  
75  
Von/off at Ion/off=0.0uA, Pin open=On  
3.5  
On/Off Control, Negative Remote On/Off logic, Refer to –Vin pin  
Logic High (Module Off)  
Logic Low (Module On)  
Von/off at Ion/off=0.0uA, Pin open=Off  
Von/off at Ion/off=1.0mA  
All  
All  
V
V
3.5  
0
75  
1.2  
On/Off Current (for both remote  
on/off logic)  
Ion/off at Von/off=0V  
All  
All  
mA  
uA  
0.3  
1
Leakage Current (for both remote  
on/off logic)  
Logic High, Von/off=15V  
30  
10  
Off Converter Input Current  
Over Temperature Shutdown  
Over Temperature Recovery  
Shutdown input idle current  
All  
All  
All  
mA  
°C  
5
110  
100  
Temperature at the Center Part of Base  
Plate, Non-Latching  
°C  
www.cincon.com  
3
REVISION: V10  
CQB75-300S
Serie
GENERAL SPECIFICATIONS  
PARAMETER  
NOTES and CONDITIONS  
Device  
Min.  
Typ.  
Max.  
Units  
850  
850  
850  
850  
1050  
300S05  
300S12  
300S15  
300S24  
300S48  
All  
Io=100% of Io_max  
MIL-HDBK - 217F_Notice 1, GB, 25°C  
;
K
hours  
MTBF  
Weight  
grams  
61  
Case Material  
Base plate Material  
Potting Material  
Plastic, DAP, UL 94V-0  
Aluminum  
UL 94V-0  
Base: Copper  
Plating: Nickel with Matte Tin  
Pin Material  
Shock/Vibration  
Humidity  
MIL-STD-810F Compliant  
95% RH max. Non Condensing  
Altitude  
3000m Operating Altitude, 12000m Transport Altitude  
MIL-STD-810F  
Thermal Shock  
Fire & Smoke  
EMI  
EN45545-2 Compliant  
Meets EN55032 & EN55022 Compliant (with external filter)  
Class A  
ESD  
EN61000-4-2  
Level 3: Air ±8kV, Contact ±6kV  
Level 3: 80~1000MHz, 20V/m  
Perf. Criteria A  
Perf. Criteria A  
Radiated immunity  
EN61000-4-3  
EN61000-4-4  
Level 3: On power input port, ±2kV, external input capacitor  
required,  
Fast Transient  
Perf. Criteria A  
Surge  
EN61000-4-5  
EN61000-4-6  
Level 4: Line to earth, ±4kV, Line to line, ±2kV  
Level 3: 0.15~80MHz, 10V  
Perf. Criteria A  
Perf. Criteria A  
Conducted immunity  
Power Frequency Magnetic Field  
immunity  
EN61000-4-8  
50/60Hz, 3A/m (r.m.s.)  
Perf. Criteria A  
Application Note Link  
CQB75-300S Series App Notes  
Packaging Information  
Packaging Information Link  
Immunity to Environmental Conditions.  
Phenomenon  
Reference Clause  
Reference Standard  
Test Conditions  
Result  
Unit are non-operating  
Vibration Waveform：Random  
Vibration Frequency：15 ~ 2000 Hz  
Total Grms：4.01997 grms  
Vibration axis：X、Y、Z axis  
Duration：1hr / axis  
MIL-STD-810F Table  
514.5C-VIII Figure  
514.5C-6  
Vibration Test  
MIL-STD-810F  
Pass  
Wave form：Sawtooth wave  
Test Category : Crash Hazard Test  
for Ground Equipment  
Duration：10 ms  
Peak Acceleration：75 G  
MIL-STD-810F 516.5  
Table 516.5-I  
Shock Test  
MIL-STD-810F  
Pass  
Cross-over Frequency：80 Hz  
No. of Shock：Each axis 3 times  
Shock Direction：±X , ±Y , ±Z axis  
Temperature：-55℃to 105℃  
Humidity：95%RH  
Duration：8hrs/ 3 times cycling&  
4hrs dwell time  
Temperature：60℃to 30℃  
Humidity：95%RH  
Duration：240 hrs  
MIL-STD-810F 503.4  
Figure 503.4-1  
Thermal Shock Cycling Test  
MIL-STD-810F  
MIL-STD-810F  
Pass  
Pass  
Thermal Humidity Cycling  
Test  
MIL-STD-810F Notice 3  
Method 507.4  
www.cincon.com  
4
REVISION: V10  
CQB75-300S Serie
EN45545-2 Fire & Smoke Test Conditions.  
Item  
Standard  
Hazard Level  
HL1, HL2, HL3  
HL1, HL2  
EN 45545-2: 2013  
Oxygen Index Test  
EN ISO 4589-2: 2006  
EN 45545-2: 2013  
EN ISO 5659-2: 2013  
EN 45545-2: 2013  
NF X70-100: 2006  
EN 45545-2: 2013  
EN ISO 4589-2: 2006  
EN 45545-2: 2013  
EN ISO 5659-2: 2013  
EN 45545-2: 2013  
NF X70-100: 2006  
EN45545-2: 2013  
EN ISO 4589-2  
R22  
Smoke Density Test  
Smoke Toxicity Test  
Oxygen Index Test  
Smoke Density Test  
Smoke Toxicity Test  
Oxygen Index Test  
Glow - Wire Test  
HL1, HL2, HL3  
HL1, HL2, HL3  
HL1, HL2, HL3  
HL1, HL2, HL3  
HL1, HL2, HL3  
HL1, HL2, HL3  
HL1, HL2, HL3  
R23  
R24  
R25  
R26  
EN 45545-2:2013  
EN 60695-2-11:2001  
EN 45545-2: 2013  
EN 60695-11-10: 2013  
Vertical Flame Test  
CHARACTERISTIC CURVE  
Power Derating Curve  
CQB75-300S05 Derating Curve  
CQB75-300S12, 15, 24, 48 Derating Curve  
without Heatsink (Vin=300V)  
without Heatsink (Vin=300V)  
110  
110  
100  
90  
80  
70  
60  
50  
40  
30  
20  
10  
0
100  
90  
80  
70  
60  
Natural  
50  
Natural  
100 ft./min.  
200 ft./min.  
300 ft./min.  
400 ft./min.  
40  
100 ft./min.  
30  
200 ft./min.  
20  
300 ft./min.  
10  
400 ft./min.  
0
0
10 20 30 40 50 60 70 80 90 100 110  
0
10 20 30 40 50 60 70 80 90 100 110  
Ambient Temperature (℃)  
Ambient Temperature (℃)  
CQB75-300S05 Derating Curve  
with Heatsink QBL127 (Vin=300V)  
CQB75-300S12, 15, 24, 48 Derating Curve  
with Heatsink QBL127 (Vin=300V)  
110  
100  
90  
80  
70  
60  
50  
40  
30  
20  
10  
0
110  
100  
90  
80  
70  
60  
50  
40  
30  
20  
10  
0
Natural  
Natural  
100 ft./min.  
200 ft./min.  
300 ft./min.  
400 ft./min.  
100 ft./min.  
200 ft./min.  
300 ft./min.  
400 ft./min.  
0
10 20 30 40 50 60 70 80 90 100 110  
0
10 20 30 40 50 60 70 80 90 100 110  
Ambient Temperature (℃)  
Ambient Temperature (℃)  
www.cincon.com  
5
REVISION: V10  
CQB75-300S Serie
CQB75-300S05 Derating Curve  
with Heatsink QBT210 (Vin=300V)  
CQB75-300S12, 15, 24, 48 Derating Curve  
with Heatsink QBL127 (Vin=300V)  
110  
100  
90  
80  
70  
60  
50  
40  
30  
20  
10  
0
110  
100  
90  
80  
70  
60  
50  
40  
30  
20  
10  
0
Natural  
Natural  
100 ft./min.  
200 ft./min.  
300 ft./min.  
400 ft./min.  
100 ft./min.  
200 ft./min.  
300 ft./min.  
400 ft./min.  
0
10 20 30 40 50 60 70 80 90 100 110  
0
10 20 30 40 50 60 70 80 90 100 110  
Ambient Temperature (℃)  
Ambient Temperature (℃)  
Performance Data  
CQB75-300S05  
Eff Vs Io @25 Deg. C  
CQB75-300S05  
Pd Vs Po @25 Deg. C  
95%  
90%  
85%  
80%  
75%  
70%  
65%  
60%  
18  
15  
12  
9
180V  
300V  
450V  
180V  
300V  
450V  
6
3
0
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%  
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%  
Current Load (%)  
Output Power (%)  
CQB75-300S12  
CQB75-300S12  
Eff Vs Io @25 Deg. C  
Pd Vs Po @25 Deg. C  
95%  
12  
10  
8
90%  
85%  
80%  
75%  
70%  
65%  
60%  
6
180V  
300V  
450V  
180V  
300V  
450V  
4
2
0
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%  
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%  
Current Load (%)  
Output Power (%)  
CQB75-300S15  
CQB75-300S15  
Eff Vs Io @25 Deg. C  
Pd Vs Po @25 Deg. C  
95%  
12  
10  
8
90%  
85%  
80%  
75%  
70%  
65%  
60%  
6
180V  
300V  
450V  
180V  
300V  
450V  
4
2
0
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%  
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%  
Current Load (%)  
Output Power (%)  
www.cincon.com  
6
REVISION: V10  
CQB75-300S Serie
CQB75-300S24  
Eff Vs Io @25 Deg. C  
CQB75-300S24  
Pd Vs Po @25 Deg. C  
95%  
90%  
85%  
80%  
75%  
70%  
65%  
60%  
12  
10  
8
6
180V  
300V  
450V  
180V  
300V  
450V  
4
2
0
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%  
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%  
Current Load (%)  
Output Power (%)  
CQB75-300S48  
CQB75-300S48  
Eff Vs Io @25 Deg. C  
Pd Vs Po @25 Deg. C  
95%  
12  
10  
8
90%  
85%  
80%  
75%  
70%  
65%  
60%  
55%  
6
180V  
300V  
450V  
180V  
300V  
450V  
4
2
0
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%  
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%  
Current Load (%)  
Output Power (%)  
www.cincon.com  
7
REVISION: V10  
CQB75-300S Serie
MECHANICAL SPECIFICATION  
2.28 [57.9]  
1.957 [49.70]  
0.16 [4.1]  
BOTTOM VIEW  
PIN CONNECTION  
3
4
Pin  
1
Function  
+V Input  
On/Off  
2
5
6
7
8
1
2
3
-V Input  
-V Output  
-Sense  
4
0.21 [5.3]  
5
1.86 [47.2]  
6
Trim  
Mounting lnserts  
M3*0.5 Through 2pl.  
7
+Sense  
+V Output  
8
Φ0.040[1.02] 6pl.  
Φ0.059 [1.50] 2pl.  
All Dimensions in Inches[mm]  
Tolerance Inches:x.xx= 0.02 ,x.xxx= 0.010  
Millimeters:x.x= 0.5 , x.xx= 0.25  
8
REVISION: V10  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明