CS4970X4_09 [CIRRUS]
High Definition Audio Decoder DSP Family with Dual 32-bit DSP Engine Technology; 高清晰音频解码器DSP系列采用双32位DSP引擎技术型号: | CS4970X4_09 |
厂家: | CIRRUS LOGIC |
描述: | High Definition Audio Decoder DSP Family with Dual 32-bit DSP Engine Technology |
文件: | 总34页 (文件大小:549K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CS4970x4 Data Sheet
FEATURES
Multi-standard 32-bit High Definition Audio Decoding plus
High Definition Audio Decoder DSP
Post-Processing
Family with Dual 32-bit DSP Engine Technology
Supports high-definition audio formats including:
— Dolby Digital® Plus
— Dolby® TrueHD
Up to 12 Channels of 32-bit Serial Audio Input
— DTS-HD® High Resolution Audio
— DTS-HD® Master Audio
Customer Software Security Keys
16 Ch x 32-bit PCM Out with Dual 192 kHz SPDIF Tx
Two SPI™/I2C™ ports
— DTS Express™
Additional Applications Library
One Parallel Port (144-pin LQFP package only)
Large On-chip X, Y, and Program RAM & ROM
SDRAM and Serial Flash Memory Support
— Dolby Digital® EX, Dolby® Pro Logic® IIz, Dolby
Headphone 2®, Dolby® Virtual Speaker 2®, Audistry®
— DTS-ES 96/24™ Discrete 7.1, DTS-ES™ Discrete 7.1, DTS-
ES™ Matrix 6.1, DTS Neo:6®, DTS Neural Surround™
— DSD®
The CS4970x4 DSP family is an enhanced version of the
CS4953x DSP family with higher overall performance. In
addition to all the mainstream audio processing codes in on-
chip ROM that the CS4953x DSP offers, the CS4970x4 device
family also supports the decoding of major high-definition
audio formats. Additionally, the CS4970x4, a dual-core device,
performs the high-definition audio decoding on the first core,
leaving the second core available for audio post-processing and
audio enhancement. The CS4970x4 device supports the most
demanding audio post processing requirements. It provides an
easy upgrade path to systems currently using the CS495xx or
CS4953x device with minor hardware and software changes.
— MPEG-2 AAC™ LC 5.1
— SRS® CS2®, SRS TruVolume™, SRS® TruSurround
HD4™, WOW HD™,
— THX® Ultra2™, THX® ReEQ™
— Thomson MP3 Surround
— Audyssey 2EQ™ Module
Cirrus Logic’s Applications Library
— Cirrus Original Multi-Channel Surround 2 (COMS2),
Cirrus Band Xpander™, Cirrus Virtualization Technology,
Cirrus Intelligent Room Calibration 2 (IRC2)
— Crossbar Mixer, Signal Generator
Ordering Information
See page 28 for ordering information.
— Advanced Post-Processors including: 7.1 Bass Manager,
Tone Control, 11- Band Parametric EQ, Delay, 2:1/4:1
Decimator, 1:2/1:4 Upsampler
Serial
Control 1
Serial
Control 2
Parallel
Control
GPIO
Debug
12 Ch. Audio In /
6 Ch. SACD In
STC
D
M
A
Coyote 32-bit
Coyote 32-bit
DSP B
TMR1
TMR2
DSP A
S/PDIF
S/PDIF
P
X
Y
P
X
Y
16 Ch PCM
Audio Out
PLL
Ext. Memory Controller
This document contains information for a new product.
Cirrus Logic reserves the right to modify this product without notice.
Preliminary Product Information
Copyright 2009 Cirrus Logic
Nov ‘09
DS752PP8
http://www.cirrus.com
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
Table of Contents
1. Documentation Strategy ................................................................................................................ 4
2. Overview .......................................................................................................................................... 4
2.1 Migrating from the CS495xx(2) to the CS4970x4 ........................................................................................... 6
2.2 Licensing ......................................................................................................................................................... 6
3. Code Overlays .................................................................................................................................6
4. Hardware Functional Description ................................................................................................. 7
4.1 Coyote DSP Core ........................................................................................................................................... 7
4.1.1 DSP Memory ...................................................................................................................................... 7
4.1.2 DMA Controller ................................................................................................................................... 7
4.2 On-chip DSP Peripherals ................................................................................................................................ 7
4.2.1 Digital Audio Input Port (DAI) ............................................................................................................. 7
4.2.2 Digital Audio Output Port (DAO) ........................................................................................................ 8
4.2.3 Serial Control Port 1 & 2 (I2C™ or SPI™) ........................................................................................... 8
4.2.4 Parallel Control Port ........................................................................................................................... 8
4.2.5 External Memory Interface ................................................................................................................. 8
4.2.6 GPIO .................................................................................................................................................. 8
4.2.7 PLL-based Clock Generator ............................................................................................................... 8
4.3 DSP I/O Description ........................................................................................................................................ 8
4.3.1 Multiplexed Pins ................................................................................................................................. 8
4.3.2 Termination Requirements ................................................................................................................. 8
4.3.3 Pads ................................................................................................................................................... 9
4.4 Application Code Security ............................................................................................................................... 9
5. Characteristics and Specifications .............................................................................................10
5.1 Absolute Maximum Ratings .......................................................................................................................... 10
5.2 Recommended Operating Conditions ........................................................................................................... 10
5.3 Digital DC Characteristics ............................................................................................................................. 10
5.4 Power Supply Characteristics ........................................................................................................................11
5.5 Thermal Data (144-Pin LQFP) .......................................................................................................................11
5.6 Thermal Data (128-pin LQFP) .......................................................................................................................11
5.7 Switching Characteristics— RESET# ........................................................................................................... 12
5.8 Switching Characteristics — XTI .................................................................................................................. 12
5.9 Switching Characteristics — Internal Clock .................................................................................................. 13
5.10 Switching Characteristics — Serial Control Port - SPI Slave Mode ............................................................ 13
5.11 Switching Characteristics — Serial Control Port - SPI Master Mode .......................................................... 14
5.12 Switching Characteristics — Serial Control Port - I2C Slave Mode ............................................................ 15
5.13 Switching Characteristics — Serial Control Port - I2C Master Mode .......................................................... 16
5.14 Switching Characteristics — Parallel Control Port - Inte® Slave Mode ...................................................... 17
5.15 Switching Characteristics — Parallel Control Port - Motorola® Slave Mode ............................................. 19
5.16 Switching Characteristics — Digital Audio Slave Input Port ....................................................................... 21
5.17 Switching Characteristics — DSD® Serial Input Port ................................................................................. 22
5.18 Switching Characteristics — Digital Audio Output Port ............................................................................... 23
5.19 Switching Characteristics — SDRAM Interface .......................................................................................... 24
6. Ordering Information ....................................................................................................................28
7. Environmental, Manufacturing, and Handling Information .....................................................28
8. Device Pin-Out Diagram ...............................................................................................................29
8.1 128-Pin LQFP Pin-Out Diagram ................................................................................................................... 29
8.2 144-Pin LQFP Pin-Out Diagram .................................................................................................................. 30
2
Copyright 2009 Cirrus Logic
DS752PP8
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
9. Package Mechanical Drawings ....................................................................................................31
9.1 128-Pin LQFP Package Drawing ..................................................................................................................31
9.2 144-Pin LQFP Package Drawing ..................................................................................................................32
10. Revision History ..........................................................................................................................33
List of Figures
Figure 1. RESET# Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Figure 2. XTI Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Figure 3. Serial Control Port - SPI Slave Mode Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Figure 4. Serial Control Port - SPI Master Mode Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Figure 5. Serial Control Port - I2C Slave Mode Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Figure 6. Serial Control Port - I2C Master Mode Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Figure 7. Parallel Control Port - Intel® Slave Mode Read Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Figure 8. Parallel Control Port - Intel Slave Mode Write Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Figure 9. Parallel Control Port - Motorola® Slave Mode Read Cycle Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Figure 10. Parallel Control Port - Motorola Slave Mode Write Cycle Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Figure 11. Digital Audio Input (DAI) Port Timing Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Figure 12. DSD Serial Audio Input Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Figure 13. Digital Audio Port Output Timing Master Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Figure 14. Digital Audio Output Timing, Slave Mode (Relationship LRCLK to SCLK) . . . . . . . . . . . . . . . . . . . . . . . . .24
Figure 15. External Memory Interface - SDRAM Burst Read Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Figure 16. External Memory Interface - SDRAM Burst Write Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Figure 17. External Memory Interface - SDRAM Auto Refresh Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Figure 18. External Memory Interface - SDRAM Load Mode Register Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Figure 19. 128-Pin LQFP Pin-Out Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Figure 20. 144-Pin LQFP Pin-Out Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Figure 21. 128-Pin LQFP Package Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Figure 22. 144-Pin LQFP Package Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
List of Tables
Table 1. CS4970x4 Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Table 2. Device and Firmware Selection Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Table 3. CS4970x4 DSP Memory Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Table 4. Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Table 5. Environmental, Manufacturing, & Handling Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Table 6. 128-Pin LQFP Package Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Table 7. 144-Pin LQFP Package Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
DS752PP8
Copyright 2009 Cirrus Logic
3
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
1. Documentation Strategy
The CS4970x4 data sheet describes the CS4970x4 family of multichannel audio decoders. This document should be
used in conjunction with the following documents when evaluating or designing a system around the CS4970x4
family of processors.
Table 1. CS4970x4 Related Documentation
Document Name
Description
CS4970x4 Data Sheet
This document
A new consolidated documentation set that includes:
• Detailed system design information including
Typical Connection Diagrams, Boot-Procedures, Pin
Descriptions, Etc. Also describes use of DSP
Condenser tool.
CS4953x4/CS4970x4 System Designer’s Guide
• Detailed firmware design information including
signal processing flow diagrams and control API
information
Includes detailed firmware design information
including signal processing flow diagrams and
control API information
AN288 - CS4953xx/CS497xxx Firmware User’s Manual
The scope of the CS4970x4 Data Sheet is primarily the hardware specifications of the CS4970x4 family of devices.
This includes hardware functionality, characteristic data, pinout, and packaging information.
The intended audience for the CS4970x4 Data Sheet is the system PCB designer, MCU programmer, and the quality
control engineer.
2. Overview
The CS4970x4 DSP Family, together with Cirrus Logic’s comprehensive library of audio processing algorithms,
enables the development of next-generation high-definition audio solutions. Cirrus Logic also provides a broad
array of digital interface products and audio converters to meet your audio system-level design requirements.
The CS4970x4 is available in 144-pin and 128-pin LQFP packages. The audio processing features of the CS4970x4
product family are a superset of audio features available in the CS4953xx product family.
Please refer to Table 2 on page 5 for the speed and firmware features of CS4970x4 product family.
4
Copyright 2009 Cirrus Logic
DS752PP8
Table 2. Device and Firmware Selection Guide
Decode Processor
(DSP-A)1
Matrix-processor
(DSP-A)1
Virtualizer-processor
Post-processor
(DSP-B1
Device
(DSP-B)1
Stereo PCM
(4:1/2:1 Down-sampling and
Dolby PLIIz
2
1:2/1:4 Up-sampling Options)
SRS Circle Surround II
APP
(Stereo In)
(Advanced Post-processing)
Multi-Channel PCM
–Tone Control
Cirrus Original Multi-Channel
Surround (Effects / Reverb
Processor)
(4:1/2:1 Down-sampling and
CS497014
–Re-EQ
–PEQ (up to 11 Bands)
–Delay
2
1:2/1:4 Up-sampling Options)
300 MIPS
Dolby Digital
MPEG-2 AAC LC 5.1
Dolby Digital Plus
Dolby TrueHD
Dolby Headphone 2
(Speaker to Listening
Position Alignment
and/or Lip Sync)
–7.1 Bass Manager
–Audio Manager
–4:1/2;1 Down-
sampling2
SRS TruSurround HD4,
WOW HD
Crossbar (Down-mix / Up-
mix)
Dolby Virtual Speaker 2
SRS TruVolume
(Simultaneous Process)
CS497004
Same as CS49014 +
DTS, DTS-ES, DTS96/24
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS Express
300 MIPS
Same as CS49014 +
DTS Neo:6
CS497024
300 MIPS
1. Processing may be restricted and dependent on firmware selected. Contact your Cirrus Logic FAE for concurrency matrix.
2. Downsampling and Upsampling functionality is located in the operating system. The Cirrus Decimator (Down-Sampler) is also available as
a separate post-processing module that is described in the application note, AN288PPI.
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
2.1 Migrating from the CS495xx(2) to the CS4970x4
The CS4970x4 was designed to provide an easy upgrade path from the CS495xx & CS4953x. Although 144-pin
versions of the two devices are virtually identical with respect to external system connection, there are some small
differences the hardware designer should be aware of:
• The PLL supply voltage on the CS4970x4 is 3.3V vs. 1.8V on the CS495xx.
• The PLL filter topology is simpler when using the CS4970x4 rather than the CS495xx.
• The CS4970x4 adds support for 6-channel DSD input.
• The CS4970x4 adds support for TDM mode on both audio input and output ports.
• The CS4970x4 does not support external SRAM operation.
• The CS4970x4 external SDRAM bus speed is fixed at 150 MHz vs. the 120 MHz max bus speed for the
CS495xx. Some firmware modules also support a 75 MHz CS4970x4 SDRAM bus speed. Please refer to
AN304 for details.
• The CS4970x4 CLKOUT pin can output XTALI or XTALI/2. The CS495xx can only output XTALI.
2.2 Licensing
Licenses are required for all of the third party audio decoding/processing algorithms listed below, including the
application notes. Please contact your local Cirrus Sales representative for more information.
3. Code Overlays
The suite of software available for the CS4970x4 family consists of operating systems (OS) and a library of
overlays. The overlays have been divided into three main groups called Decoders, Matrix-processors, and Post-
processors. All software components are defined in the following list:
• OS/Kernel - Encompasses all non-audio processing tasks, including loading data from external memory,
processing host messages, calling audio-processing subroutines, auto-detection, error concealment, etc.
• Decoders - Any Module that initially writes data into the audio I/O buffers, e.g. AC-3™, DTS, PCM, etc. All
the decoding/processing algorithms listed require delivery of PCM or IEC61937-packed, compressed data via
2
I S- or LJ-formatted digital audio to the CS4970x4 from A/D converters, SPDIF Rx, HDMI Rx, etc.
• Matrix-processors - Any module that processes audio I/O buffer PCM data in-place before the Post-
processors. Generally speaking, these modules alter the number of valid channels in the audio I/O buffer
through processes like Virtualization (nÖ2 channels) or Matrix Decoding (2Ön channels). Examples are Dolby
ProLogic IIx and DTS Neo:6.
• Virtualizer-processor - Any module that encodes PCM data into fewer output channels than input channels
(nÖ2 channels) with the effect of providing “phantom” speakers to represent the physical audio channels that
®
®
were eliminated. Examples are Dolby Headphone 2 and Dolby Virtual Speaker 2. Generally speaking, these
modules reduce the number of valid channels in the audio I/O buffer.
• Post-processors - Any module that processes audio I/O buffer PCM data in-place after the Matrix-Processors.
Examples are Bass Management, Audio Manager, Tone Control, EQ, Delay, Customer-specific Effects, Dolby
Headphone/Virtual Speaker, etc.
The overlay structure reduces the time required to reconfigure the DSP when a processing change is requested. Each
overlay can be reloaded independently without disturbing the other overlays. For example, when a new decoder is
selected, the OS, matrix-, and post-processors do not need to be reloaded — only the new decoder (the same is true
for the other overlays).
6
Copyright 2009 Cirrus Logic
DS752PP8
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
4. Hardware Functional Description
4.1 Coyote DSP Core
The CS4970x4 is a dual-core Coyote DSP with separate X and Y data and P code memory spaces. Each core is a
high-performance, 32-bit, user-programmable, fixed-point DSP that is capable of performing two multiply
accumulate (MAC) operations per clock cycle. Each core has eight 72-bit accumulators, four X- and four Y-data
registers, and 12 index registers.
Both DSP cores are coupled to a flexible DMA engine. The DMA engine can move data between peripherals such
as the digital audio input (DAI) and digital audio output (DAO), external memory, or any DSP core memory, all
without the intervention of the DSP. The DMA engine offloads data move instructions from the DSP core, leaving
more MIPS available for signal processing instructions.
CS4970x4 functionality is controlled by application codes that are stored in on-board ROM or downloaded to the
CS4970x4 from a host MCU or external FLASH/EEPROM. Users can choose to use standard audio decoder and
post-processor modules which are available from Cirrus Logic.
The CS4970x4 is suitable for Audio Decoder, Audio Post-processor, Audio Encoder, DVD Audio/Video Player, and
Digital Broadcast Decoder applications.
4.1.1 DSP Memory
Each DSP core has its own on-chip data and program RAM and ROM and does not require external memory for any
of today’s popular audio algorithms including Dolby Digital Surround EX, AAC Multichannel, DTS-ES 96/24, and
THX Ultra2. However, if the end-system design requires support of the new high-definition audio formats, external
SDRAM will be needed to support Dolby TrueHD and DTS-HD Master Audio.
The memory maps for the DSPs are as follows. All memory sizes are composed of 32-bit words.
Table 3. CS4970x4 DSP Memory Sizes
Memory
DSP A
DSP B
Type
X
Y
P
16k SRAM, 32k ROM
24k SRAM, 32k ROM
8k SRAM, 32k ROM
10k SRAM, 8k ROM
16k SRAM, 16k ROM
8k SRAM, 24k ROM
4.1.2 DMA Controller
The powerful 12-channel DMA controller can move data between 8 on-chip resources. Each resource has its own
arbiter: X, Y, and P RAM/ROMs on DSP A; X, Y, and P RAM/ROMs on DSP B; external memory; and the
peripheral bus. Modulo and linear addressing modes are supported, with flexible start address and increment
controls. The service interval for each DMA channel as well as up to 6 interrupt events, is programmable.
4.2 On-chip DSP Peripherals
4.2.1 Digital Audio Input Port (DAI)
The 12-channel (6 line) DAI port supports a wide variety of data input formats. The port is capable of accepting
PCM, IEC61937, or DSD. Up to 32-bit word lengths are supported. Up to 6 channels of DSD are supported and
internally converted to PCM before processing. Additionally support is provided for audio data input to the DSP via
the DAI from an HDMI receiver.
DS752PP8
Copyright 2009 Cirrus Logic
7
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
The port has two independent slave-only clock domains. Each data input can be independently assigned to a clock
domain. The sample rate of the input clock domains can be determined automatically by the DSP, which off-loads
the task of monitoring the SPDIF receiver from the host. A time-stamping feature allows the input data to be
sample-rate converted via software.
4.2.2 Digital Audio Output Port (DAO)
There are two DAO ports. Each port can output 8 channels of up to 32-bit PCM data. The port supports data rates
from 32 kHz to 192 kHz. Each port can be configured as an independent clock domain in slave mode, or the ratio of
the two clocks can be set to even multiples of each other in master mode. The two ports can also be ganged together
into a single clock domain. Each port has one serial audio pin that can be configured as a 192 kHz SPDIF transmitter
(data with embedded clock on a single line).
2
™
™
4.2.3 Serial Control Port 1 & 2 (I C or SPI )
There are two on-chip serial control ports that are capable of operating as master or slave in either I2C or SPI modes.
SCP1 defaults to slave operation. It is dedicated for external host-control and supports an external clock up to 50
MHz in SPI mode. This high clock speed enables very fast code download, control or data delivery. SCP2 defaults
to master mode and is dedicated for booting from external serial Flash memory or for audio sub-system control.
4.2.4 Parallel Control Port
The CS4970x4 parallel port supports both Motorola® and Intel® interfaces. It can be used for both control and data
delivery. The parallel port pins are multiplexed with serial control port 2 and are available in the 144-pin package.
4.2.5 External Memory Interface
The external memory interface controller supports up to 128 Mbits of SDRAM, using a 16-bit data bus.
4.2.6 GPIO
Many of the CS4970x4 peripheral pins are multiplexed with GPIO. Each GPIO can be configured as an output, an
input, or an input with interrupt. Each input-pin interrupt can be configured as rising edge, falling edge, active-low,
or active-high.
4.2.7 PLL-based Clock Generator
The low-jitter PLL generates integer or fractional multiples of a reference frequency which are used to clock the
DSP core and peripherals. Through a second PLL divider chain, a dependent clock domain can be output on the
DAO port for driving audio converters. The CS4970x4 defaults to running from the external reference frequency
and can be switched to use the PLL output after overlays have been loaded and configured, either through master
boot from an external FLASH or through host control. A built-in crystal oscillator circuit with a buffered output is
provided. The buffered output frequency ratio is selectable between 1:1 (default) or 2:1.
4.3 DSP I/O Description
4.3.1 Multiplexed Pins
Many of the CS4970x4 pins are multi-functional. For details on pin functionality please refer to the CS4970x4
System Designer’s Guide.
4.3.2 Termination Requirements
Open-drain pins on the CS4970x4 must be pulled high for proper operation. Please refer to the CS4970x4 System
Designer’s Guide to identify which pins are open-drain and what value of pull-up resistor is required for proper
operation.
8
Copyright 2009 Cirrus Logic
DS752PP8
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
Mode select pins on the CS4970x4 are used to select the boot mode upon the rising edge of reset. A detailed
explanation of termination requirements for each communication mode select pin can be found in the CS4970x4
System Designer’s Guide.
4.3.3 Pads
The CS4970x4 I/O operate from the 3.3 V supply and are 5 V tolerant.
4.4 Application Code Security
The external program code may be encrypted by the programmer to protect any intellectual property it may contain.
A secret, customer-specific key is used to encrypt the program code that is to be stored external to the device.
DS752PP8
Copyright 2009 Cirrus Logic
9
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
5. Characteristics and Specifications
Note: All data sheet minimum and maximum timing parameters are guaranteed over the rated voltage and temperature. All data sheet
typical parameters are measured under the following conditions: T = 25 °C, CL = 20 pF, VDD = 1.8 V, VDDA = VDDIO = 3.3 V,
GNDD = GNDIO = GNDA = 0 V.
5.1 Absolute Maximum Ratings
(GNDD = GNDIO = GNDA = 0 V; all voltages with respect to 0 V)
Parameter
Symbol
Min
Max
Unit
DC power supplies:
Core supply
PLL supply
I/O supply
VDD
VDDA
VDDIO
–0.3
–0.3
–0.3
-
2.0
3.6
3.6
0.3
V
V
V
V
|VDDA – VDDIO|
Input pin current, any pin except supplies
Input voltage on PLL_REF_RES
Input voltage on I/O pins
Iin
-
+/- 10
3.6
mA
V
Vfilt
Vinio
Tstg
-0.3
-0.3
–65
5.0
V
Storage temperature
150
°C
Caution: Operation at or beyond these limits may result in permanent damage to the device. Normal operation is not guaranteed at
these extremes.
5.2 Recommended Operating Conditions
(GNDD = GNDIO = GNDA = 0 V; all voltages with respect to 0 V)
Parameter
Symbol
Min
Typ
Max
Unit
DC power supplies:
Core supply
PLL supply
I/O supply
VDD
VDDA
VDDIO
1.71
3.13
3.13
1.8
3.3
3.3
0
1.89
3.46
3.46
V
V
V
V
|VDDA – VDDIO|
Ambient operating temperature
TA
Commercial Grade (CQZ/CVZ)
0
+25
+ 70
°C
Note: It is recommended that the 3.3 V IO supply come up ahead of or simultaneously with the 1.8 V core supply.
5.3 Digital DC Characteristics
(Measurements performed under static conditions.)
Parameter
High-level input voltage
Symbol
VIH
Min
Typ
Max
-
Unit
V
2.0
-
-
Low-level input voltage, except XTI
Low-level input voltage, XTI
Input Hysteresis
VIL
-
-
0.8
0.6
V
VILXTI
Vhys
-
V
0.4
-
V
High-level output voltage (IO = -4mA), except XTI,
SDRAM pins
VOH
VDDIO * 0.9
-
-
V
Low-level output voltage (IO = 4mA), except XTI,
SDRAM pins
VOL
-
VDDIO * 0.1
V
SDRAM High-level output voltage (IO = -8mA)
SDRAM Low-level output voltage (IO = 8mA)
VOH
VOL
IIN
VDDIO * 0.9
-
-
-
-
V
V
-
-
VDDIO * 0.1
5
Input leakage current (all digital pins with internal pull-
up resistors disabled)
μA
10
Copyright 2009 Cirrus Logic
DS752PP8
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
Parameter
Symbol
Min
Typ
Max
Unit
Input leakage current (all digital pins with internal pull-
up resistors enabled, and XTI)
IIN-PU
-
-
70
μA
5.4 Power Supply Characteristics
(Measurements performed under operating conditions.)
Parameter
Min
Typ
Max
Unit
Power supply current:
Core and I/O operating: VDD1
PLL operating: VDDA
With external memory and most ports operating: VDDIO
-
-
-
500
3.5
120
-
-
-
mA
mA
mA
1.Dependent on application firmware and DSP clock speed.
5.5 Thermal Data (144-Pin LQFP)
Parameter
Symbol
Min
Typ
Max
Unit
Thermal Resistance (Junction to Ambient)
Two-layer Board1
θja
°C / Watt
-
-
48
40
-
-
Four-layer Board2
Thermal Resistance (Junction to Top of Package)
Two-layer Board1
ψjt
°C / Watt
-
-
.39
.33
-
-
Four-layer Board2
5.6 Thermal Data (128-pin LQFP)
Parameter
Symbol
Min
Typ
Max
Unit
θja
°C / Watt
Thermal Resistance (Junction to Ambient)
Two-layer Board1
-
-
53
44
-
-
Four-layer Board2
ψjt
°C / Watt
Thermal Resistance (Junction to Top of Package)
Two-layer Board1
-
-
.45
.39
-
-
Four-layer Board2
Notes: 1.Two-layer board is specified as a 76 mm X 114 mm, 1.6 mm thick FR-4 material with 1-oz copper covering 20% of the top and bottom
layers.
2.Four-layer board is specified as a 76 mm X 114 mm, 1.6 mm thick FR-4 material with 1-oz copper covering 20% of the
top and bottom layers and 0.5-oz copper covering 90% of the internal power plane and ground plane layers.
3.To calculate the die temperature for a given power dissipation
Τj = Ambient Temperature + [ (Power Dissipation in Watts) * θja
]
4.To calculate the case temperature for a given power dissipation
Τc = Τj - [ (Power Dissipation in Watts) * ψ jt ]
DS752PP8
Copyright 2009 Cirrus Logic
11
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
5.7 Switching Characteristics— RESET#
Parameter
RESET# minimum pulse width low
Symbol
Trstl
Min
1
Max
Unit
μs
-
100
-
All bidirectional pins high-Z after RESET# low
Configuration pins setup before RESET# high
Configuration pins hold after RESET# high
Trst2z
Trstsu
-
ns
50
20
ns
Trsthld
-
ns
RESET#
HS[3:0]
All Bidirectional
Pins
Trstsu
Trsthld
Trst2z
Trstl
Figure 1. RESET# Timing
5.8 Switching Characteristics — XTI
Parameter
External Crystal operating frequency1
XTI period
Symbol
Fxtal
Min
12.288
41
Max
Unit
MHz
ns
24.576
Tclki
81.4
-
XTI high time
Tclkih
Tclkil
16.4
16.4
10
ns
XTI low time
-
ns
External Crystal Load Capacitance (parallel resonant)2
CL
18
50
pF
External Crystal Equivalent Series Resistance
ESR
Ω
1. Part characterized with the following crystal frequency values: 12.288 and 24.576 MHz.
2. CL refers to the total load capacitance as specified by the crystal manufacturer. Crystals which require a CL outside
this range should be avoided. The crystal oscillator circuit design should follow the crystal manufacturer’s
recommendation for load capacitor selection.
XTI
tclkih
tclkil
Tclki
Figure 2. XTI Timing
Copyright 2009 Cirrus Logic
12
DS752PP8
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
5.9 Switching Characteristics — Internal Clock
Parameter
Symbol
Min
Max
Unit
Internal DCLK frequency1
CS497004-CQZ
Fdclk
MHz
Fxtal
150
CS497004-CQZR
CS497024-CVZ
CS497024-CVZR
CS497024-CVZ
CS497024-CVZR
Internal DCLK period1
CS497004-CQZ
DCLKP
ns
6.7
1/Fxtal
CS497004-CQZR
CS497024-CVZ
CS497024-CVZR
CS497024-CVZ
CS497024-CVZR
1.After initial power-on reset, Fdclk = Fxtal. After initial kickstart commands, the PLL is locked to max Fdclk and remains
locked until the next power-on reset.
5.10 Switching Characteristics — Serial Control Port - SPI Slave Mode
.
Parameter
SCP_CLK frequency1
Symbol
fspisck
tspicss
Min
-
Typical
Max
Units
MHz
ns
25
-
SCP_CS# falling to SCP_CLK rising
SCP_CLK low time
24
20
20
5
tspickl
-
ns
SCP_CLK high time
tspickh
tspidsu
tspidh
-
ns
Setup time SCP_MOSI input
-
ns
Hold time SCP_MOSI input
5
-
ns
SCP_CLK low to SCP_MISO output valid
SCP_CLK falling to SCP_IRQ# rising
SCP_CS# rising to SCP_IRQ# falling
SCP_CLK low to SCP_CS# rising
SCP_CS# rising to SCP_MISO output high-Z
SCP_CLK rising to SCP_BSY# falling
tspidov
tspiirqh
tspiirql
tspicsh
tspicsdz
tspicbsyl
-
11
20
ns
-
ns
0
ns
24
-
-
ns
20
ns
-
3 DCLKP+20
*
ns
1. The specification fspisck indicates the maximum speed of the hardware. The system designer should be aware that
the actual maximum speed of the communication port may be limited by the firmware application. Flow control
using the SCP_BSY# pin should be implemented to prevent overflow of the input data buffer.At boot the
maximum speed is Fxtal/3.
DS752PP8
Copyright 2009 Cirrus Logic
13
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
tspicss
SCP_CS#
tspickl
tspicsh
0
1
2
6
7
0
5
6
7
SCP_CLK
SCP_MOSI
SCP_MISO
SCP_IRQ#
SCP_BSY#
fspisck
tspickh
A6
A5
A0
R/W
MSB
MSB
LSB
LSB
tspidsu
tspidh
tspidov
tspicsdz
tspiirqh
tspiirql
tspibsyl
Figure 3. Serial Control Port - SPI Slave Mode Timing
5.11 Switching Characteristics — Serial Control Port - SPI Master Mode
Parameter
SCP_CLK frequency1, 2
SCP_CS# falling to SCP_CLK rising 3
Symbol Min
Typical
Max
Fxtal/2
-
Units
MHz
ns
fspisck
tspicss
-
-
11*DCLKP +
(SCP_CLK PERIOD)/2
SCP_CLK low time
tspickl
tspickh
tspidsu
tspidh
18
18
11
5
-
-
ns
ns
ns
ns
ns
ns
ns
SCP_CLK high time
Setup time SCP_MISO input
Hold time SCP_MISO input
SCP_CLK low to SCP_MOSI output valid
SCP_CLK low to SCP_CS# falling
SCP_CLK low to SCP_CS# rising
-
-
tspidov
tspicsl
tspicsh
-
11
-
7
-
11*DCLKP +
-
(SCP_CLK PERIOD)/2
Bus free time between active SCP_CS#
tspicsx
tspidz
3*DCLKP
-
ns
ns
SCP_CLK falling to SCP_MOSI output high-Z
-
20
1. The specification fspisck indicates the maximum speed of the hardware. The system designer should be aware that the
actual maximum speed of the communication port may be limited by the firmware application.
2. See Section 5.8.
3. SCP_CLK PERIOD refers to the period of SCP_CLK as being used in a given application. It does not refer to a tested
parameter.
14
Copyright 2009 Cirrus Logic
DS752PP8
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
.
tspicsx
tspicss
EE_CS#
SCP_CLK
SCP_MISO
SCP_MOSI
tspickl
tspicsh
tspicsl
1
2
6
7
0
7
0
5
6
fspisck
tspickh
A6
A5
A0
R/W
MSB
MSB
LSB
LSB
tspidsu
tspidh
tspidov
tspidz
Figure 4. Serial Control Port - SPI Master Mode Timing
2
5.12 Switching Characteristics — Serial Control Port - I C Slave Mode
Parameter
Symbol Min
Typical
Max
Units
kHz
µs
SCP_CLK frequency1
SCP_CLK low time
SCP_CLK high time
fiicck
tiicckl
tiicckh
-
400
1.25
1.25
-
-
µs
SCP_SCK rising to SCP_SDA rising or falling for START tiicckcmd 1.25
or STOP condition
µs
START condition to SCP_CLK falling
SCP_CLK falling to STOP condition
tiicstscl
tiicstp
tiicbft
tiicsu
1.25
2.5
3
-
-
-
µs
µs
µs
ns
ns
ns
ns
ns
ns
Bus free time between STOP and START conditions
Setup time SCP_SDA input valid to SCP_CLK rising
Hold time SCP_SDA input after SCP_CLK falling
SCP_CLK low to SCP_SDA out valid
100
20
-
tiich
-
tiicdov
tiicirqh
tiicirql
tiicbsyl
18
SCP_CLK falling to SCP_IRQ# rising
NAK condition to SCP_IRQ# low
-
3 DCLKP + 40
*
3 DCLKP + 20
*
*
SCP_CLK rising to SCB_BSY# low
-
3 DCLKP + 20
1. The specification fiicck indicates the maximum speed of the hardware. The system designer should be aware that
the actual maximum speed of the communication port may be limited by the firmware application. Flow control
using the SCP_BSY# pin should be implemented to prevent overflow of the input data buffer.
DS752PP8
Copyright 2009 Cirrus Logic
15
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
tiicckcmd
tiicckl
tiicr
tiicf
tiicckcmd
0
1
6
7
8
0
1
6
7
8
SCP_CLK
SCP_SDA
SCP_IRQ#
SCP_BSY#
tiicstp
tiicstscl
tiicckh
tiicdov
R/W
fiicck
tiicbft
A6
A0
ACK
MSB
ACK
LSB
tiicirqh
tiicirql
tiicsu
tiich
tiiccbsyl
Figure 5. Serial Control Port - I2C Slave Mode Timing
2
5.13 Switching Characteristics — Serial Control Port - I C Master Mode
Parameter
Symbol
fiicck
Min
-
Max
Units
SCP_CLK frequency1
SCP_CLK low time
SCP_CLK high time
400
kHz
µs
tiicckl
1.25
1.25
1.25
-
-
tiicckh
µs
SCP_SCK rising to SCP_SDA rising or falling for START or STOP tiicckcmd
condition
µs
START condition to SCP_CLK falling
tiicstscl
tiicstp
tiicbft
tiicsu
1.25
2.5
3
-
-
-
µs
µs
µs
ns
ns
ns
SCP_CLK falling to STOP condition
Bus free time between STOP and START conditions
Setup time SCP_SDA input valid to SCP_CLK rising
Hold time SCP_SDA input after SCP_CLK falling
SCP_CLK low to SCP_SDA out valid
100
20
-
tiich
-
tiicdov
36
1. The specification fiicck indicates the maximum speed of the hardware. The system designer should be aware that
the actual maximum speed of the communication port may be limited by the firmware application.
16
Copyright 2009 Cirrus Logic
DS752PP8
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
tiicckcmd
tiicckl
tiicr
tiicf
tiicckcmd
0
1
6
7
8
0
1
6
7
8
SCP_CLK
SCP_SDA
tiicstp
tiicstscl
tiicckh
tiicdov
R/W ACK MSB
fiicck
tiicbft
A6
A0
ACK
LSB
tiicsu tiich
Figure 6. Serial Control Port - I2C Master Mode Timing
5.14 Switching Characteristics — Parallel Control Port - Intel® Slave Mode
Parameter
Symbol Min
Typical
Max Unit
Address setup before PCP_CS# and PCP_RD# low or PCP_CS#
and PCP_WR# low
tias
5
-
ns
Address hold time after PCP_CS# and PCP_RD# low or PCP_CS#
and PCP_WR# high
tiah
5
-
ns
Read
Delay between PCP_RD# then PCP_CS# low or PCP_CS# then
PCP_RD# low
ticdr
0
-
ns
Data valid after PCP_CS# and PCP_RD# low
PCP_CS# and PCP_RD# low for read
tidd
tirpw
tidhr
tidis
tird
-
24
8
18
-
ns
ns
ns
ns
ns
Data hold time after PCP_CS# or PCP_RD# high
Data high-Z after PCP_CS# or PCP_RD# high
-
-
18
-
PCP_CS# or PCP_RD# high to PCP_CS# and PCP_RD# low for
next read1
30
PCP_CS# or PCP_RD# high to PCP_CS# and PCP_WR# low for
next write1
tirdtw
30
-
-
ns
ns
tirdirqhl
12
PCP_RD# rising to PCP_IRQ# rising
Write
Delay between PCP_WR# then PCP_CS# low or PCP_CS# then
PCP_WR# low
ticdw
0
-
ns
Data setup before PCP_CS# or PCP_WR# high
PCP_CS# and PCP_WR# low for write
tidsu
tiwpw
tidhw
tiwtrd
8
24
8
-
-
-
-
ns
ns
ns
ns
Data hold after PCP_CS# or PCP_WR# high
PCP_CS# or PCP_WR# high to PCP_CS# and PCP_RD# low for
next read1
30
PCP_CS# or PCP_WR# high to PCP_CS# and PCP_WR# low for
next write1
tiwd
30
-
-
-
ns
ns
tiwrbsyl
2*DCLKP + 20
PCP_WR# rising to PCP_BSY# falling
DS752PP8
Copyright 2009 Cirrus Logic
17
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
1. The system designer should be aware that the actual maximum speed of the communication port may be limited
by the firmware application. Hardware handshaking on the PCP_BSY# pin/bit should be observed to prevent
overflowing the input data buffer. CS4953x4/CS4970x4 System Designer’s Guide should be consulted for the
firmware speed limitations.
PCP_A[3:0]
t iah
LSP
t idhr
MSP
PCP_D[7:0]
PCP_CS#
PCP_W R#
PCP_RD#
PCP_IRQ#
t ias
t idd
t icdr
t idis
t irpw
t ird
t irdtw
tirdirqh
®
Figure 7. Parallel Control Port - Intel Slave Mode Read Cycle
PCP_A[3:0]
PCP_D[7:0]
PCP_CS#
PCP_RD#
PCP_WR#
PCP_BSY#
t iah
LSP
MSP
t ias
tidhw
t icdw
tidsu
t iwpw
tiw d
t iwtrd
tiwrbsyl
Figure 8. Parallel Control Port - Intel Slave Mode Write Cycle
18
Copyright 2009 Cirrus Logic
DS752PP8
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
5.15 Switching Characteristics — Parallel Control Port - Motorola® Slave Mode
Parameter
Address setup before PCP_CS# and PCP_DS# low
Address hold time after PCP_CS# and PCP_DS# low
Read
Symbol Min
Max
Unit
ns
tmas
tmah
5
5
-
-
ns
Delay between PCP_DS# then PCP_CS# low or PCP_CS# then
PCP_DS# low
tmcdr
tmdd
0
-
-
ns
ns
Data valid after PCP_CS# and PCP_DS# low with PCP_R/W#
high
19
PCP_CS# and PCP_DS# low for read
tmrpw
tmdhr
tmdis
tmrd
24
8
-
-
ns
ns
ns
ns
Data hold time after PCP_CS# or PCP_DS# high after read
Data high-Z after PCP_CS# or PCP_DS# high after read
-
18
-
PCP_CS# or PCP_DS# high to PCP_CS# and PCP_DS# low for
next read1
30
PCP_CS# or PCP_DS# high to PCP_CS# and PCP_DS# low for
next write1
tmrdtw
30
-
-
ns
ns
tmrwirqh
12
PCP_RW# rising to PCP_IRQ# falling
Write
Delay between PCP_DS# then PCP_CS# low or PCP_CS# then
PCP_DS# low
tmcdw
0
-
ns
Data setup before PCP_CS# or PCP_DS# high
PCP_CS# and PCP_DS# low for write
tmdsu
tmwpw
tmrwsu
tmrwhld
tmdhw
8
24
24
8
-
-
-
-
-
-
ns
ns
ns
ns
ns
ns
PCP_R/W# setup before PCP_CS# AND PCP_DS# low
PCP_R/W# hold time after PCP_CS# or PCP_DS# high
Data hold after PCP_CS# or PCP_DS# high
8
PCP_CS# or PCP_DS# high to PCP_CS# and PCP_DS# low with tmwtrd
PCP_R/W# high for next read1
30
PCP_CS# or PCP_DS# high to PCP_CS# and PCP_DS# low for
next write1
tmwd
30
-
-
-
ns
ns
tmrwbsyl
2*DCLKP + 20
PCP_RW# rising to PCP_BSY# falling
1. The system designer should be aware that the actual maximum speed of the communication port may be limited by
the firmware application. Hardware handshaking on the PCP_BSY# pin/bit should be observed to prevent
overflowing the input data buffer. CS4953x4/CS4970x4 System Designer’s Guide should be consulted for the
firmware speed limitations.
DS752PP8
Copyright 2009 Cirrus Logic
19
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
PCP_A[3:0]
t mas
tm ah
PCP_AD[7:0]
PCP_CS#
PCP_WR#
PCP_DS#
PCP_IRQ#
LSP
t mdhr
MSP
t mdd
t mrwsu
t mcdr
t mdis
tm rwhld
tmrdtw
t m rpw
tm rd
tmrwirqh
®
Figure 9. Parallel Control Port - Motorola Slave Mode Read Cycle Timing
PCP_A[3:0]
t m as
tm ah
LSP
t m dsu
M SP
PCP_AD[7:0]
PCP_CS#
PCP_W R#
PCP_DS#
PCP_IRQ#
t m dhw
t m rw hld
t m w pw
t m cdw
t m rw su
tm w d
t m w trd
tm rwirql
Figure 10. Parallel Control Port - Motorola Slave Mode Write Cycle Timing
20
Copyright 2009 Cirrus Logic
DS752PP8
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
5.16 Switching Characteristics — Digital Audio Slave Input Port
Parameter
Symbol
Tdaiclkp
-
Min
40
45
10
5
Max
Unit
ns
DAI_SCLK period
-
55
-
DAI_SCLK duty cycle
Setup time DAI_DATAn
Hold time DAI_DATAn
%
tdaidsu
tdaidh
ns
-
ns
DAI_SCLK
tdaidsu
tdaidh
DAI_DATAn
Figure 11. Digital Audio Input (DAI) Port Timing Diagram
DS752PP8
Copyright 2009 Cirrus Logic
21
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
®
5.17 Switching Characteristics — DSD Serial Input Port
Parameter
DSD_SCLK Pulse Width Low
Symbol
tsclkl
tsclkh
-
Min
78
Typ
Max
Unit
ns
-
-
-
-
-
-
-
DSD_SCLK Pulse Width High
78
ns
DSD_SCLK Frequency (64x Oversampled)
DSD_A / _B valid to DSD_SCLK rising setup time
DSD_SCLK rising to DSD_A or DSD_B hold time
1.024
20
3.2
-
MHz
ns
tsdlrs
tsdh
20
-
ns
Figure 12. DSD Serial Audio Input Timing
22
Copyright 2009 Cirrus Logic
DS752PP8
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
5.18 Switching Characteristics — Digital Audio Output Port
Parameter
Symbol
Min
40
Max
-
Unit
ns
DAO_MCLK period
Tdaomclk
DAO_MCLK duty cycle
-
45
55
-
%
DAO_SCLK period for Master or Slave mode1
DAO_SCLK duty cycle for Master or Slave mode1
Master Mode (Output A1 Mode)1,2
Tdaosclk
-
40
ns
40
60
%
DAO_SCLK delay from DAO_MCLK rising edge,
DAO_MCLK as an input
tdaomsck
-
19
ns
DAO_SCLK delay from DAO_LRCLK transition, respectively3
DAO_LRCLK delay from DAO_SCLK transition, respectively3
tdaomlrts
tdaomstlr
tdaomdv
-
-
-
8
8
ns
ns
ns
DAO1_DATA[3..0], DAO2_DATA[1..0]
delay from DAO_SCLK transition3
10
Slave Mode (Output A0 Mode)4
DAO1_DATA[3..0], DAO2_DATA[1..0]
delay from DAO_SCLK transition3
tdaosdv
-
15
ns
DAO_LRCLK delay from DAO_SCLK transition, respectively3
DAO_SCLK delay from DAO_LRCLK transition, respectively3
tdaosstlr
tdaoslrts
-
-
30
15
ns
ns
1. Master mode timing specifications are characterized, not production tested.
2. Master mode is defined as the CS4970x4 driving both DAO_SCLK, DAO_LRCLK. When MCLK is an input, it is
divided to produce DAO_SCLK, DAO_LRCLK.
3. This timing parameter is defined from the non-active edge of DAO_SCLK. The active edge of DAO_SCLK is the
point at which the data is valid.
4. Slave mode is defined as DAO_SCLK, DAO_LRCLK driven by an external source.
tdaomlclk
tdaomclk
DAO_MCLK
DAO_SCLK
DAO_MCLK
DAO_SCLK
tdaomsck
tdaomsck
tdaomdv
DAOn_DATAn
DAO_LRCLK
DAOn_DATAn
tdaomlrts
tdaomstlr
DAO_LRCLK
Note: In these diagrams, Falling edge is the inactive edge of DAO_SCLK
Figure 13. Digital Audio Port Output Timing Master Mode
DS752PP8
Copyright 2009 Cirrus Logic
23
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
tdaosclk
tdaosstlr
DAO_LRCLK
DAO_SCLK
DAO_LRCLK
DAO_SCLK
tdaosclk
tdaoslrts
DAOn_DATAn
tdaosdv
Note: In these diagrams, Falling edge is the inactive edge of DAO_SCLK
Figure 14. Digital Audio Output Timing, Slave Mode (Relationship LRCLK to SCLK)
5.19 Switching Characteristics — SDRAM Interface
Refer to Figure 15 through Figure 18.
(SD_CLKOUT = SD_CLKIN)
Parameter
SD_CLKIN high time
Symbol
tsdclkh
tsdclkl
Min
2.3
2.3
-
Typical
Max
Unit
ns
-
-
SD_CLKIN low time
ns
SD_CLKOUT rise/fall time
tsdclkrf
1
ns
SD_CLKOUT Frequency
150
MHz
%
SD_CLKOUT duty cycle
-
45
-
55
SD_CLKOUT rising edge to signal valid
Signal hold from SD_CLKOUT rising edge
SD_CLKOUT rising edge to SD_DQMn valid
SD_DQMn hold from SD_CLKOUT rising edge
SD_DATA valid setup to SD_CLKIN rising edge
SD_DATA valid hold to SD_CLKIN rising edge
SD_CLKOUT rising edge to ADDRn valid
tsdcmdv
tsdcmdh
tsddqv
tsddqh
tsddsu
tsddh
3.8
ns
1.1
3.8
-
-
-
-
-
-
ns
-
ns
1.38
1.3
1.38
-
ns
ns
ns
tsdav
3.8
ns
24
Copyright 2009 Cirrus Logic
DS752PP8
SD_CLKOUT
SD_CS#
tsdclkrf
tsdcmdv
tsdcmdh
SD_RAS#
SD_CAS#
SD_WE#
tsddqh
tsddqv
SD_DQMn
11
00
SD_An
tsdav
tsddsu
tsddh
CAS=2
LSP1
MSP1
LSP2
MSP2
SD_Dn
LSP0
MSP0
LSP3
MSP3
SD_CLKIN
tsdclkl
tsdclkh
Figure 15. External Memory Interface - SDRAM Burst Read Cycle
SD_CLKOUT
tsdcmdv
tsdcmdh
SD_CS#
SD_RAS#
SD_CAS#
SD_WE#
LSP0
MSP0
LSP1
MSP1
LSP2
MSP2
LSP3
MSP3
SD_Dn
SD_An
tsdav
SD_DQMn
00
11
tsddqv
tsddqh
Figure 16. External Memory Interface - SDRAM Burst Write Cycle
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
SD_CLKOUT
tsdcmdv
tsdcmdv
tsdcmdh
SD_CS#
SD_RAS#
SD_CAS#
SD_WE#
SD_DQMn
SD_An
SD_Dn
Figure 17. External Memory Interface - SDRAM Auto Refresh Cycle
26
Copyright 2009 Cirrus Logic
DS752PP8
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
SD_CLKOUT
tsdcmdv
tsdcmdh
SD_CS#
SD_RAS#
SD_CAS#
SD_WE#
SD_DQMn
SD_An
OPCODE
SD_Dn
Figure 18. External Memory Interface - SDRAM Load Mode Register Cycle
DS752PP8
Copyright 2009 Cirrus Logic
27
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
6. Ordering Information
The CS4970x4 family part number is described as follows:
CS497NNI-XYZ
where
NN - Product Number Variant
I - ROM ID Number
X - Product Grade
Y - Package Type
Z - Lead (Pb) Free
Table 4. Ordering Information
Part No.
Grade
Temp. Range
Container
Package
CS497004-CQZ
CS497004-CQZR
CS497014-CVZ
CS47014-CVZR
CS497024-CVZ
CS497024-CVZR
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
0 to +70 °C
0 to +70 °C
0 to +70 °C
0 to +70 °C
0 to +70 °C
0 to +70 °C
Tray
Reel
Tray
Reel
Tray
Reel
144-pin LQFP
128-pin LQFP
128-pin LQFP
Note: Please contact the factory for availability of the -D (automotive grade) package.
7. Environmental, Manufacturing, and Handling Information
Table 5. Environmental, Manufacturing, & Handling Information
Model Number
CS497004-CQZ
CS497004-CQZR
CS497014-CVZ
CS47014-CVZR
CS497024-CVZ
CS497024-CVZR
Peak Reflow Temp
260 °C
MSL Rating*
Max Floor Life
7 Days
3
3
3
3
3
3
260 °C
7 Days
260 °C
7 Days
260 °C
7 Days
260 °C
7 Days
260 °C
7 Days
* MSL (Moisture Sensitivity Level) as specified by IPC/JEDEC J-STD-020.
28
Copyright 2009 Cirrus Logic
DS752PP8
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
8. Device Pin-Out Diagram
8.1 128-Pin LQFP Pin-Out Diagram
1
5
SD_A0, EXT_A0
SD_A1, EXT_A1
GPIO38, PCP_WR# / DS#, SCP2_CLK
GPIO11, PCP_A3, AS#, SCP2_MISO / SDA
100
GPIO10, PCP_A2 / A10, SCP2_MOSI
VDDIO5
SD_A2, EXT_A2
GND4
GPOI9, SCP1_IRQ#
GPIO8, PCP_IRQ#, SCP2_IRQ#
SD_A3, EXT_A3
SD_A4, EXT_A4
95 VDD4
GPIO7, SCP1_CS#, IOWAIT
GPIO6, PCP_CS#, SCP2_CS#
VDDIO7
EXT_CS2#
GNDIO7
SD_A5, EXT_A5
GNDIO4
10
15
20
25
30
35
GPIO3, DDAC
GPIO2
SD_A6, EXT_A6
90 SD_A7, EXT_A7
VDDIO4
VDD7
GPIO1
GPIO0, EE_CS#
SD_A8, EXT_A8
SD_A9, EXT_A9
GND3
GND7
XTAL_OUT
XTI
85 SD_A11, EXT_A11
SD_A12, EXT_A12
VDD3
XTO
GNDA
CS497xx4
128-Pin LQFP
PLL_REF_RES
SD_CLKEN
SD_CLKIN
VDDA (3.3V)
VDD8
80 SD_CLKOUT
SD_DQM1
GPIO14, DAI1_DATA3, TM3, DSD3
GPIO13, DAI1_DATA2, TM2, DSD2
GND8
SD_D8, EXT_D8
SD_D9, EXT_D9
GNDIO3
GPIO12, DAI1_DATA1, TM1, DSD1
DAI1_DATA0, TM0, DSD0
VDDIO8
75 SD_D10, EXT_D10
SD_D11, EXT_D11
VDDIO3
DAI1_SCLK, DSD_CLK
DAI1_LRCLK, DSD4
SD_D12, EXT_D12
SD_D13, EXT_D13
70 SD_D14, EXT_D14
SD_D15, EXT_D15
SD_D0, EXT_D0
GNDIO8
GPIO42, BDI_REQ# , DAI2_LRCLK, PCP_IRQ# / BSY#
GPIO43, BDI_CLK, DAI2_SCLK
BDI_DATA, DAI2_DATA, DSD5
GPIO26, DAO2_DATA3 / XMTB
GNDIO2
DBDA
DBCK
EXT_WE#
65 SD_D1, EXT_D1
GPIO20, DAO2_DATA2
Figure 19. 128-Pin LQFP Pin-Out Diagram
DS752PP8
Copyright 2009 Cirrus Logic
29
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
8.2 144-Pin LQFP Pin-Out Diagram
GPIO9, PCP_A1 / A9
109
110
72 SD_A0, EXT_A0
SD_A1, EXT_A1
GPIO8, PCP_A0 / A8
GPIO7, PCP_AD7 / D7
GPIO6, PCP_AD6 / D6
VDDIO7
70 SD_A2, EXT_A2
GND4
69
SD_A3, EXT_A3
SD_A4, EXT_A4
VDD4
113
GPIO5, PCP_AD5 / D5
GPIO4, PCP_AD4 / D4
GNDIO7
115
116
66
65
EXT_CS2#
SD_A5, EXT_A5
GNDIO4
GPIO3, PCP_AD3 / D3
GPIO2, PCP_AD2 / D2
VDD7
63
60
57
SD_A6, EXT_A6
SD_A7, EXT_A7
VDDIO4
119
120
GPIO1, PCP_AD1 / D1
GPIO0, PCP_AD0 / D0
GND7
SD_A8, EXT_A8
SD_A9, EXT_A9
GND3
122
XTAL_OUT
XTI
SD_A11, EXT_A11
SD_A12, EXT_A12
125
XTO
CS497xx4
144-Pin LQFP
GNDA 126
NC
55
54
VDD3
SD_CLKEN
PLL_REF_RES
SD_CLKIN
VDDA (3.3V) 129
VDD8 130
SD_CLKOUT
SD_DQM1
GPIO14, DAI1_DATA3, TM3, DSD3
GPIO13, DAI1_DATA2, TM2, DSD2
GND8 133
50
47
SD_D8, EXT_D8
SD_D9, EXT_D9
GNDIO3
GPIO12, DAI1_DATA1, TM1, DSD1
DAI1_DATA0, TM0, DSD0 135
VDDIO8 136
SD_D10, EXT_D10
SD_D11, EXT_D11
VDDIO3
45
44
DAI1_SCLK, DSD_CLK
DAI1_LRCLK, DSD4
SD_D12, EXT_D12
SD_D13, EXT_D13
SD_D14, EXT_D14
GNDIO8 139
140
GPIO42, BDI_REQ# , DAI2_LRCLK, PCP_IRQ# / BSY#
GPIO43, BDI_CLK, DAI2_SCLK
BDI_DATA, DAI2_DATA, DSD5
GPIO27
40 SD_D15, EXT_D15
SD_D0, EXT_D0
EXT_WE#
GPIO26 144
37 SD_D1, EXT_D1
Figure 20. 144-Pin LQFP Pin-Out Diagram
30
Copyright 2009 Cirrus Logic
DS752PP8
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
9. Package Mechanical Drawings
9.1 128-Pin LQFP Package Drawing
D
D1
E1
E
1
e
b
∝
A
A1
L
Figure 21. 128-Pin LQFP Package Drawing
Table 6. 128-Pin LQFP Package Characteristics
MILLIMETERS
INCHES
NOM
DIM
MIN
NOM
MAX
MIN
MAX
A
A1
b
---
---
1.60
0.15
0.27
---
---
---
.063”
.006”
.011”
0.05
0.17
---
.002”
.007”
0.22
.009”
.866”
.787”
.630”
.551”
.020”
3.5
D
22.00 BSC
20.00 BSC
16.00 BSC
14.00 BSC
0.50 BSC
3.5
D1
E
E1
e
q
0°
7°
0°
7°
L
0.45
0.60
0.75
.018”
.024”
.039” REF
.030”
L1
1.00 REF
TOLERANCES OF FORM AND POSITION
ddd
0.08
.003”
DS752PP8
Copyright 2009 Cirrus Logic
31
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
9.2 144-Pin LQFP Package Drawing
E
E1
D D1
Notes:
Controlling dimension is millimeter.
Dimensioning and tolerancing per
ASME Y14.5M-1994.
SEATING PLANE
B
e
b
ddd
B
L1
θ
A
A1
L
Figure 22. 144-Pin LQFP Package Drawing
Table 7. 144-Pin LQFP Package Characteristics
MILLIMETERS
INCHES
NOM
DIM
MIN
NOM
MAX
MIN
MAX
A
A1
b
---
---
1.60
0.15
0.27
---
---
---
.063”
.006”
.011”
0.05
0.17
---
.002”
.007”
0.22
.009”
.866”
.787”
.866”
.787”
.020”
---
D
22.00 BSC
20.00 BSC
22.00 BSC
20.00 BSC
0.50 BSC
---
D1
E
E1
e
q
0°
7°
0°
7°
L
0.45
0.60
0.75
.018”
.024”
.039” REF
.030”
L1
1.00 REF
TOLERANCES OF FORM AND POSITION
ddd
0.08
.003”
32
Copyright 2009 Cirrus Logic
DS752PP8
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
10. Revision History
Revision
Date
Changes
A1
FEB 2007
Advance Release.
Removed Advanced Product watermark, corrected logo, and added “Preliminary
Product Information” on first page and modified legal information to reflect
Preliminary Product status.
PP1
PP2
MAY 2007
JULY 2007
Added notice about status of DTS-HD license on page 1 and 7.
Updated the Tspidsu, Tspickl, and Tspickh timing parameters for master mode
SPI. This applies to both SPI ports. Removed DTS-HD license notice inserted in
version PP2. The license for the DTS-HD decoder is now in place.
PP3
OCT 2007
Updated Pin Assignments in 144-Pin LQFP Pin-Out Diagram, removing EE_CS
from Pin 7 and adding EE_CS to Pin 25.
Updated DAO timing specifications and timing diagrams. Changed product
naming conventions in Table 4 and Table 5. Changed references to CS4970x4
Hardware User’s Manual to CS4970x4 System Designer’s Guide. Changed
references to CS4970x4 Firmware User’s Manual to CS4970x4 System Designer’s
Guide
PP4
PP5
December 20, 2007
May 28, 2008
Added 128-Pin LQFP Pin-Out and Package drawings. Changed part numbering in
Section 6.and Section 7. Added device and firmware selection guide in Table 2.
Added typical crystal frequency values in Table Footnote 1 and the Max and Min
values of Fxtal in Section 5.8. Removed DSD Phase Modulation Mode from
Section 5.17. Removed reference to MCLK in Section 5.17. Redefined Master
mode clock speed for SCP_CLK in Section 5.11. Redefined DC leakage
characterization data in Section 5.3, correcting units of measurement. Modified
Footnote 1 under Section 5.10. Changed product family numbering from
CS497xx to CS4970x4. Corrected product listings in table under Section 5.9
“Switching Characteristics — Internal Clock” on page 13.
PP6
PP7
August 4, 2008
September 30, 2008
Removed references to External Parallel Flash / SRAM Interface.
Updated the feature descriptions on the first page of this data sheet. Removed
references to UART port. Removed references to 11.2896, 18.432, and 27 MHz
frequency clocks in Note 1 in Section 5.8 “Switching Characteristics — XTI” on
page 12 and the Min and Max External Crystal Operating Frequency values in that
same section. Added Section 5.6 “Thermal Data (128-pin LQFP)” on page 11.
Updated Figure 9 and Figure 10. Updated Section 5.17 “Switching
Characteristics — DSD“ Serial Input Port” on page 22. Updated Figure 15 and
Figure 16. In Section 5.3, the parameter, “Input leakage current (all digital pins
with internal pull-up resistors enabled, and XTI)”, Max value changes from 50
mA to 70 mA. In Section 5.13, the parameter SCP_CLK low to SCP_SDA out
valid with symbol “tiicdov” Max value changes from 18 ns to 36 ns. Added
CS497014 to Section 6. “Ordering Information” on page 28 and to Section 7.
“Environmental, Manufacturing, and Handling Information” on page 28. Updated
Table 2, “Device and Firmware Selection Guide,” on page 5.
PP8
November 6, 2009
DS752PP8
Copyright 2009 Cirrus Logic
33
CS4970x4 Data Sheet
32-bit High Definition Audio Decoder DSP Family
Contacting Cirrus Logic Support
For all product questions and inquiries contact a Cirrus Logic Sales Representative.
To find the one nearest to you go to www.cirrus.com
.
IMPORTANT NOTICE
“Preliminary” product information describes products that are in production, but for which full characterization data is not yet available. Cirrus Logic, Inc. and its sub-
sidiaries (“Cirrus”) believe that the information contained in this document is accurate and reliable. However, the information is subject to change without notice and
is provided “AS IS” without warranty of any kind (express or implied). Customers are advised to obtain the latest version of relevant information to verify, before placing
orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowl-
edgment, including those pertaining to warranty, indemnification, and limitation of liability. No responsibility is assumed by Cirrus for the use of this information, includ-
ing use of this information as the basis for manufacture or sale of any items, or for infringement of patents or other rights of third parties. This document is the property
of Cirrus and by furnishing this information, Cirrus grants no license, express or implied under any patents, mask work rights, copyrights, trademarks, trade secrets or
other intellectual property rights. Cirrus owns the copyrights associated with the information contained herein and gives consent for copies to be made of the informa-
tion only for use within your organization with respect to Cirrus integrated circuits or other products of Cirrus. This consent does not extend to other copying such as
copying for general distribution, advertising or promotional purposes, or for creating any work for resale.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPER-
TY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). CIRRUS PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN
PRODUCTS SURGICALLY IMPLANTED INTO THE BODY, AUTOMOTIVE SAFETY OR SECURITY DEVICES, LIFE SUPPORT PRODUCTS OR OTHER CRITICAL
APPLICATIONS. INCLUSION OF CIRRUS PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER'S RISK AND CIRRUS
DISCLAIMS AND MAKES NO WARRANTY, EXPRESS, STATUTORY OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FIT-
NESS FOR PARTICULAR PURPOSE, WITH REGARD TO ANY CIRRUS PRODUCT THAT IS USED IN SUCH A MANNER. IF THE CUSTOMER OR CUSTOMER'S
CUSTOMER USES OR PERMITS THE USE OF CIRRUS PRODUCTS IN CRITICAL APPLICATIONS, CUSTOMER AGREES, BY SUCH USE, TO FULLY INDEM-
NIFY CIRRUS, ITS OFFICERS, DIRECTORS, EMPLOYEES, DISTRIBUTORS AND OTHER AGENTS FROM ANY AND ALL LIABILITY, INCLUDING ATTORNEYS'
FEES AND COSTS, THAT MAY RESULT FROM OR ARISE IN CONNECTION WITH THESE USES.
Cirrus Logic, Cirrus, the Cirrus Logic logo designs, DSP Composer, and Cirrus Framework are trademarks of Cirrus Logic, Inc. All other brand and product names in
this document may be trademarks or service marks of their respective owners.
Dolby, Dolby Digital, Dolby Headphone, Dolby Virtual Speaker, Dolby Headphone, Pro Logic, AC-3, Audistry, and Surround EX are registered trademarks of Dolby
Laboratories, Inc. AAC is a trademark of Dolby Laboratories, Inc. Supply of an implementation of Dolby Technology does not convey a license nor imply a right under
any patent, or any other industrial or Intellectual Property Right of Dolby Laboratories, to use the Implementation in any finished end-user or ready-to-use final product.
It is hereby notified that a license for such use is required from Dolby Laboratories.
DTS and DTS Digital Surround are registered trademarks of the Digital Theater Systems, Inc. DTS Neo:6, DTS-ES 96/24, DTS-ES, DTS 6.1, DTS 96/24, DTS Neural
Surround, and DTS Express are trademarks of Digital Theater Systems, Inc. It is hereby notified that a third-party license from DTS is necessary to distribute software
of DTS in any finished end-user or ready-to-use final product.
THX Technology by Lucasarts Entertainment Company Corporation. THX is a registered trademark of Lucasarts Entertainment Company Corporation. Re-equaliza-
tion and Ultra 2 are trademarks of Lucasfilm Ltd.
SRS, Circle Surround and Trusurround XT are registered trademarks of SRS Labs, Inc. Circle Surround II, TruSurround HD4, and WOW HD are trademarks of SRS
Labs, Inc. The CIRCLE SURROUND TECHNOLOGY rights incorporated in the Cirrus Logic chip are owned by SRS Labs, Inc. and by Valence Technology Ltd., and
licensed to Cirrus Logic, Inc.
Users of any Cirrus Logic chip containing enabled CIRCLE SURROUND® TECHNOLOGY (i.e., CIRCLE SURROUND® LICENSEES) must first sign a license to pur-
chase production quantities for consumer electronics applications which may be granted upon submission of a preproduction sample to, and the satisfactory passing
of performance verification tests performed by SRS Labs, Inc., or Valence Technology Ltd. E-mail requests for performance specifications and testing rate schedule
may be made to cslicense@srslabs.com. SRS Labs, Inc. and Valence Technology, Ltd., reserve the right to decline a use license for any submission that does not
pass performance specifications or is not in the consumer electronics classification.
All equipment manufactured using any Cirrus Logic chip containing enabled CIRCLE SURROUND® TECHNOLOGY must carry the Circle Surround® logo on the front
panel in a manner approved in writing by SRS Labs, Inc., or Valence Technology Ltd. If the Circle Surround logo is printed in users manuals, service manuals or
advertisements, it must appear in a form approved in writing by SRS Labs, Inc., or Valence Technology, Ltd. The rear panel of Circle Surround® products, users
manuals, service manuals, and all advertising must all carry the legends as described in LICENSOR'S most current version of the CIRCLE SURROUND Trademark
Usage Manual.
Microsoft and Windows Media are registered trademarks of Microsoft Corporation. The product includes technology owned by Microsoft Corporation and cannot be
used or distributed without a license from Microsoft Licensing, Inc.
, HDCD, High Definition Compatible Digital and Pacific Microsonics Inc. are either registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries. HDCD technology provided under license from Microsoft Corporation. The product's design (and/or software) is covered by one or more
of the following: 5,479,168; 5,638,074; 5,640,161; 5,808,574; 5,838,274; 5,854,600; 5,864,311; 5,872,531 with other patents pending.
Supply of this product does not convey a license under the relevant intellectual property of Thomson multimedia and/or Fraunhofer Gesellschaft nor imply any right to
use this product in any finished end user or ready-to-use final product. An independent license for such use is required. For details, please visit
http://www.mp3licensing.com.
Motorola and SPI are trademarks of Motorola, Inc.
Intel is a registered trademark of Intel Corporation.
2
I C is a trademark of Philips Semiconductor.
DSD, and Direct Stream Digital are registered trademarks of SONY KABUSHIKI KAISHA CORPORATION.
34
Copyright 2009 Cirrus Logic
DS752PP8
相关型号:
©2020 ICPDF网 联系我们和版权申明