7103L40CWV31PE [CK-COMPONENTS]

SWITCH TOGGLE SPDT 0.4VA 20V;


型号：	7103L40CWV31PE
厂家：	C&K COMPONENTS
描述：	SWITCH TOGGLE SPDT 0.4VA 20V 开关 PC 光电二极管
文件：	总14页 (文件大小：2635K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

7000 Series

Miniature Toggle Switches

Features/Benefits

Typical Applications

•

Multi-pole and multi-position

•

Telecommunications

Wide variety of actuator and

termination options

Instrumentation

Medical equipment

•

Epoxy terminal-seal compatible with

bottom wash cleaning

RoHS compliant models available

DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.

Specifications

CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or

DC max. Q contact material: 5 AMPS @ 120 V AC or 28 V DC;

2 AMPS @ 250 V AC. See page F-15 for additional ratings.

OPERATING TEMPERATURE: –30ºC to 85ºC.

SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E

method 9 (1 hour steam aging).

ELECTRICAL LIFE: 7X01 and UX1 models: 100,000 make-and-break

cycles at full load. All other models: 40,000 cycles.

For materials see page F-5.

NOTE: Any models supplied with P, S R, Q, B or G contact material are RoHS compliant

and compatible.

CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC,

100 mA, for both silver and gold plated contacts.

NOTE: Specifications listed above are for switches with standard options. For information

on specific and custom switches, consult Customer Service Center.

INSULATION RESISTANCE: 10 Ω min.

Build-A-Switch

To order, simply select desired option from each category and place in the appropriate box. Available options are shown and

described on pages F–5 thru F–17. For additional options not shown in catalog, consult our Customer Service Center.

Bushing

Switch Function

7101 SP On-None-On

7103 SP On-Off-On

.280 high, keyway

.296 high, flat

.350 high, keyway

Actuator

Contact Material

.200” high

Gold

Gold, matte-tin

Silver

Silver, matte-tin

Gold over silver

Gold over silver, matte-tin

Seal

7105 SP Mom.-Off-Mom.

7107 SP On-Off-Mom.

7108 SP On-None-Mom.

7109 SP None-On-Mom.

7201 DP On-None-On

7203 DP On-Off-On

7205 DP Mom.-Off-Mom.

7207 DP On-Off-Mom.

7208 DP On-None-Mom.

7211 DP On-On-On

7213 DP On-On-Mom.

7215 DP Mom.-On-Mom.

7301 3P On-None-On

7303 3P On-Off-On

7305 3P Mom.-Off-Mom.

7308 3P On-None-Mom.

7401 4P On-None-On

7403 4P On-Off-On

P3 Flatted, anti-rotation,

Epoxy

Epoxy potted

base

NONE No bushing

choice required

CW Splashproof

.450” high

.420” high

.687” high, 15/32 bushing

D8 .280” high, flat

K2 Locking lever, .704” high

K9 Locking lever, .704” high

K12 Locking lever, .732” high

K19 Locking lever, .732” high

D9 .280” high, keyway

H3 .315” high, keyway

H4 8mm high, keyway

Y1 .378” high, keyway

Y3 8.9mm high, keyway

Y4 .378” high, flat

Actuator Color/Finish

NONE Bright chrome

.840” high

L1 .640” high

L1P Anti-rotation, .640” high

L2 .550” high

Black

Red

Satin chrome

Y9 .350” high, keyway

L2P Anti-rotation, .550” high

L3 Plastic .940” inch

L40 Lever handle without cap

L41 .531” high lever handle with cap

L42 .838” high lever handle with cap

MP Anti-rotation, .200” high

P1 Flatted, anti-rotation,

.840” high

P4 Flatted, anti-rotation,

.250” high

SP Anti-rotation, .420” high

T1 .487” high, 15/32 bushing

T1P Anti-rotation, .487” high,

15/32 bushing

Terminations

Right angle, PC thru-hole

AV2 Vert. right angle, PC thru-hole

PC Thru-hole

V3 .460 high, V-bracket

Solder lug

A2 Right angle, PC thru-hole

A3 Right angle, PC thru-hole

A4 Right angle, PC thru-hole

AW1 Right angle, extended, PC thru-hole

AW4 Right angle, extended, PC thru-hole

V2 .555” high, V-bracket

KXX Actuator Color/Finish

NONE Natural aluminum

Black anodized aluminum

Red anodized aluminum

Blue anodized aluminum

Grip tip aluminum

7405 4P Mom.-Off-Mom.

7408 4P On-None-Mom.

7411 4P On-On-On

7413 4P On-On-Mom.

7415 4P Mom.-On-Mom.

Bushing Finish

NONE Nickel on all

bushings (except D8,

satin chrome)

Black

Note: UL models available,

see pages F-4 & F-5.

V4 .630” high, V-bracket

V6 .460” high, V-bracket

T2P Flatted, anti-rotation,

.610” high, 15/32 bushing,

TP Anti-rotation, .687” high,

15/32 bushing

V7 .630” high, V-bracket

V8 .953” high, V-bracket

V9 1.150” high, V-bracket

V21 .555” high, snap-in V-bracket W1 .964” long, wire wrap

.750” long, wire wrap

V31 .460” high, snap-in V-bracket W3 .425” long, wire wrap

V41 .630” high, snap-in V-bracket W4 1.062” long, wire wrap

V71 .630” high, snap-in V-bracket

V81 .953” high, snap-in V-bracket

W5 1.305” long, wire wrap

Z3 Quick connect

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

15 Jan 21

www.ckswitches.com

F–3

7000 Series

Miniature Toggle Switches

Materials

CASE: Glass filled nylon 6/6, flame retardant, heat stabilized, or

diallyl phthalate (DAP) (UL 94V-0).

CENTER CONTACTS & ALL TERMINALS: B contact material: Copper

alloy, with gold plate over nickel plate. Q contact material: Copper

alloy, silver plated. See above for additional contact materials.

ACTUATOR: Brass, chrome plated.

BUSHING: Brass or zinc, nickel plated.

HOUSING: Stainless steel.

TERMINAL SEAL: Epoxy.

HARDWARE: Nut & Locking Ring: Brass, nickel plated.

Lockwasher: Steel, nickel plated.

SWITCH SUPPORT: Brass or steel, tin plated.

NOTE: Materials listed above are for switches with standard options. For information

on specific and custom switches, consult Customer Service Center.

END CONTACTS: B contact material: Copper alloy, with gold plate

over nickel plate. Q contact material: Coin silver, silver plated.

See page F-15 for additional contact materials.

SWITCH FUNCTION

CONNECTED TERMINALS

POS. 1

POS. 2

POS. 3

POS. 1

POS. 2

POS. 3

UL**

MODEL

NO.

POLES

MODEL NO.

SCHEMATIC

7101

U11

NONE

OFF

2-3

N/A

2-1

7103

7105

7107

7108

7109

U13

U15

U17

U18

U19

MOM.

OFF

MOM.

OPEN

OFF

NONE

2-3

N/A

2-3

2-1

NONE

N/A

SPDT

1/4-40 UNS-2A

KEYWAY

Terminal Numbers

For Reference Only

Part number shown: 7101SYZBE

7201

7203

7205

U21

NONE

OFF

NONE

2-3,5-6

N/A

OPEN

N/A

2-1,5-4

U23

U25

MOM.

2-1,5-4

7207

U27

7208

U28

7211 *

7213 *

7215 *

U211 *

U213 *

U215 *

MOM.

2-3,5-4

DPDT

MOM.

DPDT

1/4-40 UNS-2A

KEYWAY

Terminal Numbers

For Reference Only

Part number shown: 7201SYZQE

MOM. = Momentary

** U11–U415 model nos.

with all options when ordered with G, R, Q or S contact material.

** Wiring for 3-way switch

* Wiring for 3-way switch, see Section N.

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

15 Jan 21

www.ckswitches.com

F–4

7000 Series

Miniature Toggle Switches

SWITCH FUNCTION

CONNECTED TERMINALS

POS. 1

POS. 2

POS. 3

POS. 1

POS. 2

POS. 3

UL**

MODEL

NO.

POLES

MODEL NO.

7301

SCHEMATIC

U31

U33

U35

U37

U38

NONE

OFF

2-3,5-6,8-9

N/A

OPEN

N/A

2-1,5-4,8-7

7303

7305

MOM.

OFF

MOM.

7307

OFF

3PDT

7308

NONE

3PDT

1/4-40 UNS-2A

KEYWAY

Terminal Numbers

For Reference Only

Part number shown: 7301SYZQE

7401

7403

7405

7408

7411*

7413*

7415*

U41

NONE

2-3,5-6,8-9,11-12

N/A

2-1,5-4,8-7,11-10

U43

OFF

NONE

U45

MOM.

2-3,5-6,8-9,11-12

OPEN

N/A

2-1,5-4,8-7,11-10

U48

U411*

U413*

U415*

MOM.

2-3,5-6,8-9,11-12 2-3,5-4,8-9,11-10 2-1,5-4,8-7,11-10

4PDT

MOM.

4PDT

1/4-40 UNS-2A

KEYWAY

Terminal Numbers

For Reference Only

Part number shown: 7401SYZQE

MOM. = Momentary

** U11–U415 model nos.

with all options when ordered with G, Q, R or S contact material.

** Wiring for 3-way switch

Wiring for 3-way switch, see Section N.

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

15 Jan 21

www.ckswitches.com

F–5

7000 Series

Miniature Toggle Switches

ACTUATOR FINISH

ACTUATOR

.4206” HIGH

.2006” HIGH

L, L1, L2 .8406”, .6406”, .5506” HIGH

L1P, L2P ANTIROTATION,

2,3

SP ANTIROTATION, .4206” HIGH

MP ANTIROTATION, .2006” HIGH

2,3

.8406”, .6406”, .5506” HIGH

OPTION

CODE

DIM ‘A’

*DIM. ‘A’

.840 (21,34)

.640 (16,26)

.550 (13,97)

L1, L1P

L2, L2P

S actuator standard when ordered with

C, W-W5, Z & Z3 terminations.

M actuator standard when ordered with

all terminations except C, W-W5, Z & Z3.

Caps are available separately, see page F-16.

2,3

*P1 FLATTED WITH ANTIROTATION, .8406” HIGH

*P3 FLATTED WITH ANTIROTATION,

*P4 FLATTED WITH ANTIROTATION, .2506” HIGH

2,3

.4506” HIGH

*Dress nut part number 709901201 supplied standard with threaded bushing. (Part number 709903201 with metric threaded bushings.)

1,2

.687 (17,45)6 HIGH

T1 .487 (12,37)6 HIGH

T2P FLATTED, ANTIROTATION, .6106” HIGH,

1,2,3

15/32 BUSHING

TP ANTIROTATION, .687 (17,45) HIGH,

T1P ANTIROTATION, .487 (12,37) HIGH,

1,2,3

15/32 BUSHING

15/32-32 UNS-2A

.687

.487

(12,37)

15/32-32 UNS-2A

(17,45)

.448

(11,38)

Bushing option code not required unless CW splashproof bushing ordered. TP & T1P

actuators not available with CW splashproof bushing. All TXX actuators not available on

single pole models with A-A4, AW1-AW4 terminations.

Bushing option code not required. T2P actuator not available

with CW splashproof bushing or single pole models with

A-A4, AW1-AW4 terminations.

L, L1, L2, M, S & TXX actuators not available

NOTE: Black hardware is supplied when either

black actuators or bushings are specified. For

additional hardware, see Technical Data.

OPTION

with Y1 bushing.

CODE

NONE

ACTUATOR FINISH

L1P, L2P, MP, P1, P3, P4, SP & TXX actuators

not

BRIGHT CHROME-With Nickel Plated Bushing

available with D8 & H4 bushing.

BLACK

Antirotation: Provides anti-‘push-in’ feature on

actuator.

SATIN CHROME

* Add .070 (1,78) for D, D8 & D9 bushings,

subtract .020 (0,51) for H3 bushing.

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

15 Jan 21

www.ckswitches.com

F–6

7000 Series

Miniature Toggle Switches

ACTUATOR FINISH/COLOR

ACTUATOR

K2 LOCKING LEVER, .704” HIGH

K12 LOCKING LEVER, .732” HIGH

(threaded)

K9 LOCKING LEVER, .704” HIGH

K19 LOCKING LEVER, .732” HIGH

(unthreaded)

ReplacesK, K8

ReplacesK1, K18

OPTION

CODE

ACTUATOR CAP FINISH

NONE

NATURAL ALUMINUM-With Nickle Plated Bushing

BLACK ANODIZED ALUMINUM

RED ANODIZED ALUMINUM

BLUE ANODIZED ALUMINUM

GRIP TIP ALUMINUM

Locking Positions

* All KXX models including KXXCW have a keyway

NOTE: To prevent accidental actuation, toggle must be lifted

before being actuated. When released, toggle will lock in place.

Overtightening mounting nut may cause actuator to bind.

Locking levers supplied with bushing shown.

–01 Models

2 Position lock

–03 & –11 Models –05, –09 & –15 Models –07 & –13 Models

3 Position lock 1 Position lock 2 Position lock

–08 Models

1 Position lock

Bushing option code not required unless CW splashproof

bushing ordered.

L40 LEVER HANDLE WITHOUT CAP

L41 PLASTIC LEVER HANDLE WITH

L42 PLASTIC LEVER HANDLE WITH

ANTIROTATION AND CAP, P/N 4810

ANTIROTATION AND CAP, P/N 4811

Finish: Matte (L41 & L42).

No color choice required

L3 PLASTIC .940” HIGH

OPTION

CODE

PLASTIC ACTUATOR

COLORS

NONE

No Actuator Color (L40 option)

BLACK

RED

Gloss Plastic

Chrome Finish

NOTE: Lever handle for L41 & L42 actuators supplied, but not installed. For interchangeability,

order L40 actuator option and lever handles separately, see page F-16. L4X actuators not

available with H4, Y1, Y4 bushings. Antirotation: Provides anti-‘push-in’ feature on actuator.

* Add .070 (1,78) for D, D8 & D9 bushings,

subtract .020 (0,51) for H3 bushing.

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

15 Jan 21

www.ckswitches.com

F–7

7000 Series

Miniature Toggle Switches

BUSHING FINISH

BUSHING

.350” HIGH,

NONE NO BUSHING

.280” HIGH,

.296” HIGH, FLAT

THREADED, HIGH TORQUE

H3 .315” HIGH, KEYWAY

1,2

Y9^{THREADED, KEYWAY}

.350” HIGH,

D8^{THREADED, KEYWAY}

.280” HIGH, UNTHREADED,

THREADED, HIGH

1,2

TORQUE

UNTHREADED,

KEYWAY

FLAT

D9 .280” HIGH, UNTHREADED,

KEYWAY

No bushing choice required

with KXX, TXX actuators.

(exception: Specify CW if

splashproof bushing desired).

D, D9

1/4-40 UNS-2A

D9 bushing standard with all terminations

except C, W-W5, Z or Z3. Add .070 (1,78) to

all actuators lengths with D, D8 & D9 bushings.

Y bushing standard with C,

W-W5, Z or Z3 terminations.

Subtract .020 (0,51) from all actuator

lengths for H3 bushing.

H4 8mm HIGH, KEYWAY, THREADED,

Y1 .378” HIGH, KEYWAY, THREADED,

Y3 8.9mm HIGH, KEYWAY,

THREADED, METRIC

Y4 .378” HIGH, FLAT, THREADED,

1,2,3

1,2,4

1,2,5

METRIC HIGH TORQUE

HIGH TORQUE

1/4-40 UNS-2A

1,2

CW THREADED, SPLASHPROOF

For T & T1 actuators.

For actuators other than T, T1 and KXX.

OPTION

CODE

BUSHING FINISH

NICKEL on all bushings

except ‘D8’ satin chrome.

NONE

BLACK

15/32-32 UNS-2A

1/4-40 UNS-2A

Will withstand 12 in.-lbs. of torque with no distortion.

CW. H, H3, H4, Y1 & Y4 bushings not available on single pole models

with A4 terminations.

D8 & H4 bushings available only with L, L1, L2, M & S actuators.

Y1 bushing available only with LXP, MP, PX & SP actuators.

IP67 Degree of protection, totally protected against

dust, full-scale voltage protection, temporary immersion.

Internal actuator seal standard.

External bushing seal available separately from

APM Hexseal, part # MFS-60064.

Y4 bushing not available with L4X actuators.

IP67 Degree of protection, totally protected

against dust, full-scale voltage protection,

temporary immersion. Internal actuator seal

and external bushing seal washer standard.

IP65 degree of protection for LXP, MP, PX

or SP with CW option.

NOTE: Two mounting nuts, locking ring and lockwasher supplied standard with

threaded bushings. Black hardware is supplied when either black bushings or

actuators are specified. Optional mounting nut and locking ring styles and finishes

available.

PANEL MOUNTING

1/4 INCH BUSHING

METRIC BUSHING

15/32 INCH BUSHING

Without locking ring.

With standard locking ring. With small locking ring. Without locking ring.With locking ring. Without lockingring.

With standard locking ring.

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

15 Jan 21

www.ckswitches.com

F–8

7000 Series

Miniature Toggle Switches

TERMINATIONS

SOLDER LUG

PC THRU-HOLE

PC MOUNTING

.030 (0,76) Thk.

Not available with P, R or S contact materials.

SPDT thru 4PDT

Z3 QUICK CONNECT

W, W1, W3, W4, W5 WIRE WRAP

OPTION

CODE

DIM ‘A’

Dim 'A'

.750 (19,05)

.964 (24,48)

.425 (10,80)

1.062 (26,97)

1.305 (33,15)

.030 (0,76) Thk.

Not available with P, R or S contact materials.

Mating quick connector available, order part

number 530100000, page F-16.

SPDT thru 4PDT

RIGHT ANGLE, PC THRU-HOLE

Actuator Shown

In Pos. 1

7101MD9ABE

SECTION A-A

Horizontal Actuation

Terminal Nos.

For Reference Only

SPDT

SwitchsupportwithCW, H, H3, H4, Y1, Y4

bushings and KXX actuators.

Part No. Shown: 7101MHABE

A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE

AW1, AW4 RIGHT ANGLE, EXTENDED,

PC THRU-HOLE

PC MOUNTING

OPTION

CODE

DIM ‘A’

AW1

AW4

.72 (18,3)

.83 (21,1)

Dim 'A'

Not available with I seal option.

Terminal bend radii and lead-in manufacturing option.

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

15 Jan 21

www.ckswitches.com

F–9

7000 Series

Miniature Toggle Switches

TERMINATIONS

RIGHT ANGLE, PC THRU-HOLE

7201MD9ABE

Horizontal Actuation

DPDT

Actuator Shown

In Pos. 1

Terminals &

Support

SECTION A-A

A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE

AW1, AW4 RIGHT ANGLE, EXTENDED,

PC THRU-HOLE

PC MOUNTING

OPTION

CODE

DIM ‘A’

AW1

.40 (10,2)

.50 (12,7)

DIM 'A'

AW4

.33 (8,4)

Not available with I seal option.

Terminal bend radii and lead-in manufacturing option.

RIGHT ANGLE, PC THRU-HOLE

7301MD9ABE

Horizontal Actuation

3PDT

Terminals &

Support

Actuator Shown

In Pos. 1

SECTION A-A

AW4 RIGHT ANGLE, EXTENDED, PC THRU-HOLE

PC MOUNTING

.18

(4,6)

.33 TYP.

(8,4)

Not available with I seal option.

Terminal bend radii and lead-in manufacturing option.

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

15 Jan 21

www.ckswitches.com

F–10

7000 Series

Miniature Toggle Switches

TERMINATIONS

A2 RIGHT ANGLE, PC THRU-HOLE,

PC MOUNTING

.156” PITCH

7101MHA2BE

Horizontal Actuation

SPDT

Terminals & Support

Actuator Shown In Pos. 1

SwitchsupportwithCW, H, H3, H4, Y1, Y4

bushings and KXX actuators.

Not available with TXX actuators and I seal.

Part No. Shown: 7101MHA2BE

Terminal bend radii and lead-in manufacturing option.

A4 RIGHT ANGLE, PC THRU-HOLE

.156” PITCH

PC MOUNTING

7101MD9A4BE

Horizontal Actuation

SPDT

Actuator Shown In Pos. 1

Not available with KXX & TXX actuators, CW, H, H3, H4, Y1 & Y4 bushings,

and I seal. Terminal bend radii and lead-in manufacturing option.

NOTE: The A4 option is available with any contact material and can be UL recognized and

CSA certified. The PC pattern must clear switch support legs.

AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,

PC MOUNTING

.150” PITCH

7101MD9AV2BE

Horizontal Actuation

Actuator Shown In Pos. 1

SPDT

SECTION A-A

Not available with I seal option.

Terminal bend radii and lead-in manufacturing option.

PC MOUNTING

AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,

.150” PITCH

7201MD9AV2BE

Vertical Actuation

DPDT

SECTION A-A

Actuator Shown In Pos. 1

Not available with I seal option.

Terminal bend radii and lead-in manufacturing option.

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

15 Jan 21

www.ckswitches.com

F–11

7000 Series

Miniature Toggle Switches

TERMINATIONS

AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,

.150” PITCH

PC MOUNTING

7301MD9AV2BE

Vertical Actuation

Actuator Shown In Pos. 1

SECTION A-A

3PDT

Not available with I seal option.

Terminal bend radii and lead-in manufacturing option.

AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,

.150” PITCH

PC MOUNTING

7401MD9AV2BE

Vertical Actuation

Actuator Shown In Pos. 1

SECTION A-A

4PDT

Not available with I seal option.

Terminal bend radii and lead-in manufacturing option.

V2, V6, V7, V8 VERTICAL MOUNT, V-BRACKET

V21, V71, V81 VERTICAL MOUNT, V-BRACKET, SNAP-IN

PC MOUNTING

Dim ‘A’

Snap-In

7101MD9__BE

OPTION

CODE

SPDT

DIM ‘A’

Actuator Shown In Pos. 1

V2, V21

.555 (14,10)

.460 (11,68)

.630 (16,00)

.953 (24,21)

Not available with I seal option.

V7, V71

V8, V81

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

15 Jan 21

www.ckswitches.com

F–12

7000 Series

Miniature Toggle Switches

TERMINATIONS

PC MOUNTING

V2, V6, V7, V8 VERTICAL MOUNT, V-BRACKET

V21, V61, V71, V81 VERTICAL MOUNT, V-BRACKET, SNAP-IN

Dim ‘A’

OPTION

CODE

DIM ‘A’

7201MD9__BE

Snap-In

DPDT

V2, V21

V6, V61

V7, V71

V8, V81

.555 (14,10)

.460 (11,68)

.630 (16,00)

.953 (24,21)

Actuator Shown In Pos. 1

Not available with I seal option.

V2, V7, V8 VERTICAL MOUNT, V-BRACKET

PC MOUNTING

V21, V71, V81 VERTICAL MOUNT, V-BRACKET, SNAP-IN

Dim ‘A’

7301MD9__BE

3PDT

OPTION

CODE

DIM ‘A’

Snap-In

V2, V21

V7, V71

V8, V81

.555 (14,10)

.630 (16,00)

.953 (24,21)

Actuator Shown In Pos. 1

Not available with I seal option.

PC MOUNTING

V2, V7, V8 VERTICAL MOUNT, V-BRACKET

V21, V71, V81 VERTICAL MOUNT, V-BRACKET, SNAP-IN

Dim ‘A’

OPTION

CODE

7401MD9__BE

DIM ‘A’

4PDT

Snap-In

V2, V21

V7, V71

V8, V81

.555 (14,10)

.630 (16,00)

.953 (24,21)

Actuator Shown In Pos. 1

Not available with I seal option.

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

15 Jan 21

www.ckswitches.com

F–13

7000 Series

Miniature Toggle Switches

TERMINATIONS

V3, V4, V9 VERTICAL MOUNT, V-BRACKET

PC MOUNTING

V31, V41 VERTICAL MOUNT, V-BRACKET, SNAP-IN

Dim ‘A’

OPTION

CODE

DIM ‘A’

Snap-In

V3, V31

V4, V41

.460 (11,68)

.630 (16,00)

1.150 (29,21)

7101MD9__BE

SPDT

Actuator Shown In Pos. 1

Not available with I seal option.

V3, V4, V9 VERTICAL MOUNT, V-BRACKET

V31, V41 VERTICAL MOUNT, V-BRACKET, SNAP-IN

PC MOUNTING

Dim ‘A’

7201MD9__BE

DPDT

OPTION

CODE

Snap-In

DIM ‘A’

V3, V31

V4, V41

.460 (11,68)

.630 (16,00)

1.150 (29,21)

Actuator Shown In Pos. 1

Not available with I seal option.

V4, V9 VERTICAL MOUNT, V-BRACKET

V41 VERTICAL MOUNT, V-BRACKET, SNAP-IN

PC MOUNTING

Dim ‘A’

7301MD9__BE

3PDT

OPTION

CODE

DIM ‘A’

Snap-In

V4, V41

.630 (16,00)

1.150 (29,21)

Actuator Shown In Pos. 1

Not available with I seal option.

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

15 Jan 21

www.ckswitches.com

F–14

7000 Series

Miniature Toggle Switches

TERMINATIONS

V4, V9 VERTICAL MOUNT, V-BRACKET

PC MOUNTING

V41 VERTICAL MOUNT, V-BRACKET, SNAP-IN

Dim 'A'

7401MD9__BE

4PDT

Snap-In

OPTION

CODE

DIM ‘A’

Actuator Shown In Pos. 1

V4, V41

.630 (16,00)

Not available with I seal option.

1.150 (29,21)

CONTACT MATERIAL

OPTION

CODE

CONTACT

MATERIAL

TERMINAL

PLATING

RATINGS

GOLD

LOW LEVEL/

DRY CIRCUIT

GOLD

0.4 VA MAX. @ 20 V AC OR DC MAX.

MATTE-TIN

SILVER

4,5

SILVER

POWER

5 AMPS @ 120 V AC OR 28 V DC; 2 AMPS @ 250 V AC.

MATTE-TIN

GOLD

GOLD OVER

LOW LEVEL/DRY

0.4 VA MAX @ 20 V AC OR DC MAX. OR 5 AMPS @ 120 V AC

OR 28 V DC; 2 AMPS @ 250 V AC.

2,3

MATTE-TIN

SILVER

CIRCUIT OR POWER

* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.

NOTE: Any models supplied with P, S, R, Q, B or G contact material are RoHS compliant.

CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.

END CONTACTS: Coin silver, with gold plate over nickel plate.

U11-U415 model numbers

S, R, or Q contact material.

with all options when ordered with G,

CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate

over nickel plate.

B contact material standard with all terminations except C, Z & Z3.

Q contact material standard with C, Z & Z3 terminations.

END CONTACTS: Coin silver, silver plated.

CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.

TERMINALS: Copper alloy, with matte tin alloy nickel plate.

P, S & R contact materials not available with Z & Z3 terminations.

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

15 Jan 21

www.ckswitches.com

F–15

7000 Series

Miniature Toggle Switches

SEAL

EPOXY SEAL

EPOXY POTTED BASE

NO.

POLES

DIM ‘A’

Dim. 'A'

.410 (10,41)

.440 (11,18)

.505 (12,83)

Compatible with “bottom-wash” PC board cleaning methods.

Available with C, W-W5, Z & Z3 terminations only.

AVAILABLE HARDWARE

Cap

.312

(7,92)

.383

(9,73)

.687

(17,45)

PART NO.

896801000 WHITE

896802000 BLACK

896803000 RED

763701000 WHITE

763702000 BLACK

763703000 RED

706201000 WHITE

706202000 BLACK

706203000 RED

Material: Polyethylene

Finish: Matte

Material: Vinyl

Finish: Matte

Material: Vinyl

Finish: Matte

Fits Z3 Termination

female connector

L41 Lever handle

L42 Lever handle

.477

(12,12)

.777

(19,74)

NOTE: Additional nuts, locking rings

and lockwashers available

separately.

PART NO.

481001000 WHITE

481002263 BLACK

481003000 RED

481101000 WHITE

481102263 BLACK

481103000 RED

530100000

Available in loose pieces.

704D02000 Sealing Boot

16 [0.630]

Other colors available, consult

Customer Service Center.

Material: Nylon

Finish: Matte

Material: Nylon

Finish: Matte

759D02000 Sealing Boot

703D02000 Sealing Boot

.204 (5,2)

2 [0.079]

ø .331 (8,4)

.464 (11,79)

.524 (13,3)

15/32-32 NS-2A

1/4-40 uns-2A nut

15/32-32, NS-2A

NOTE: For use with T, TP and T2P style actuators. Cannot

be used for Switch Functions: 7103, 7203, 7303, 7403,

7107, 7207, 7307, and 7407.

NOTE: For use with T and TP style actuators. Cannot

be used for Switch Functions: 7103, 7203, 7303,

7403, 7107, 7207, 7307, 7407.

NOTE: For use with S actuator style when combined

with D, H, H3, Y, and Y4 bushings

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

15 Jan 21

www.ckswitches.com

F–16

7103L40CWV31PE [CK-COMPONENTS]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E