CCM03-3002 [CK-COMPONENTS]
CCM03 MK II; CCM03 MK II
| 型号： | CCM03-3002 |
| 厂家： | 
C&K COMPONENTS |
| 描述： | CCM03 MK II |
| 文件： | 总16页 (文件大小：593K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 29
CCM03 MK II
A new range of CCM03 connectors
Construction
have been developed to interface with
SIM/SAM cards as defined by GSM11-
11 and ENV1375-1. The connectors are
available with either hinged covers or
fixed covers and have been designed to
minimize the amount of space needed
for PCB mounting.
Contacts
Plating
Copper alloy
Contact area : Gold alloy inlay
Terminals : Tin lead (2µ min)
High temp. thermoplastic UL 94V-0 rated
Stainless steel
Moldings
Spring
Mechanical data
Features
Number of Contacts
6 or 8
Mechanical life, hinged cover
Mechanical life, fixed cover
Durability of inlay, hinged cover
Durability of inlay, fixed cover
Card insertion force
10,000 cycles min
50,000 cycles
10,000 cycles min (see note 1)
5,000 cycles
Hinged cover: 1 N max
Fixed cover: 3 N max
Hinged Cover
• Available with 6 or 8 contacts, with or
without PCB locating pegs.
• Available with card presence switch.
• The cover springs open when
unlocked while the card is in place.
Card extraction force
Hinged cover: 1 N max
Fixed cover: 0.80 N min / 3 N max
Contact force
Slide locking force
Vibration
0.25 N min / 0.50 N max
2 N min / 6 N max
• The molding is polarized so that the
cover can only be closed if the card is
correctly inserted.
Frequency 10 to 500 Hz. Acceleration 50m/s2
Duration 6 hours - amplitude 0.35 mm
Max electrical discontinuity 1µs
• The cover can be replaced without
removing the connector from the PCB
Shock
Peak value 500 m/s2 – Duration 11 ms
3 shocks in each direction of each axis
Max electrical discontinuity 1 µs
• Inspection slots allow an electrical test
to be made without opening the cover.
Electrical data
• The overall height of the connector is
only 2.5 mm. The amount of space
needed to mount the connector is just
29.65 mm x 17.2 mm
Insulation resistance
Contact resistance max
Switching current
Dielectric strength
1,000 MΩ min
100 mΩ max
10 µA min / 1 A max
750 Vrms min
Fixed Cover
Environmental data
• Available with 6 or 8 contacts.
Operating temperature
Soldering temperature
-40°C to +85°C
Temperature/time profile acc. to CECC00802
para. 6.1, Fig. 3 with peak temperature 250°C
IEC 512 test number 11c (10 days)
IEC 512 test number 11f (96 hours)
• The overall height of the connector is
2.85 mm max. Only 25.5 mm x 17.2
mm of board space is required to
mount the connector.
Damp heat
Salt mist
General
Note 1: Inlay (precious metal) rating is based on a very abrasive card being used and is
intended to represent worst case.
• With tape and reel packaging as
standard, the connectors are designed
to be automatically pick-and-placed.
• The high temperature thermoplastic
moldings are suited for infrared and
convection soldering processes.
• By using an inlay finish in the contact
area the life of the precious metal is
extended by over 10 times that of
standard gold plating.
• Robustly formed printed circuit tails
allow a co-planarity of ±0.05 mm to
be maintained.
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
27
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 30
CCM03 MK II
Ordering code
Part Number
N° of
Contacts
Cover
PCB Locating
Pegs (mm)
Stand off
(mm)
Quantity
per reel
Metal
lock
Switch
lock
Card Presence
switch
CCM03-3001 R102
CCM03-3002 R102
CCM03-3003 R102
CCM03-3004 R102
CCM03-3005 R701**
CCM03-3006 R701**
CCM03-3007 R701**
CCM03-3008 R701**
CCM03-3009 R102
CCM03-3013 R102
CCM03-3504 R122
CCM03-3505 R122
CCM03-3512 R102*
CCM03-3514 R102
6
6
8
8
6
6
8
8
6
6
8
6
6
6
Hinged
Hinged
Hinged
Hinged
Hinged
Hinged
Hinged
Hinged
Hinged
Hinged
Fixed
No
Yes
No
Yes
No
Yes
No
Yes
No
No
No
No
No
No
0.00
0.00
0.00
0.00
1.90
1.90
1.90
1.90
0.00
0.00
0.00
0.00
0.00
0.00
1000
1000
1000
1000
700
Flat
Flat
No
No
No
No
No
No
No
No
No
No
No
No
No
Yes
No
No
No
No
No
No
No
No
No
Yes
No
No
No
No
Flat
Flat
Bump
Bump
Bump
Bump
Bump
Bump
No
700
700
700
1000
1000
1200
1200
1000
1000
Fixed
No
Hinged
Hinged
Bump
Bump
*Note: Terminal width = 1 mm - Length = 1.5 mm. (For double reflow).
**Note: On request - Depending on quantities.
Packaging
CCM03 are packaged in accordance with EIA 481-3.
Standard packaging is on tape and reel.
A modification code is added to the part number that indicates reel packaging and the
number of components per reel. There are 5 reels per box.
Reel Diameter
Reel Width
X
Y
Z
360 mm
24.4 mm
344 mm
350 mm
152 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
28
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 31
CCM03 MK II Hinged Cover
Dimensional Drawings
Hinged Cover CCM03 - 3001 (6 contacts)
3002 (6 contacts - PCB locating pegs)
3003 (8 contacts)
3004 (8 contacts - PCB locating pegs)
3009 (6 contacts - lock with bump)
Open
With pegs*
Without pegs
Notes: Coplanarity of soldering surfaces: ± 0.05 mm
*Pegs: Height 0.7 mm and Ø 1 mm
PCB Layout
CCM03-3001 / 3002 / 3009
CCM03-3003 / 3004
1. Mounting pegs only available with CCM03-3002 / 3004
Unless otherwise stated, tolerances are ± 0.10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
29
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 32
CCM03 MK II Hinged Cover
Dimensional Drawings
Hinged Cover CCM03 - 3005 (6 contacts - with stand off 1.90 mm)
Open
Note: Coplanarity of soldering surfaces: ± 0.05 mm
PCB Layout
CCM03-3005
Unless otherwise stated, tolerances are ± 0.10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
30
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 33
CCM03 MK II Hinged Cover
Dimensional Drawings
Hinged Cover CCM03 - 3006 (6 contacts - with locating pegs 1.90 mm)
pen
Note: Coplanarity of soldering surfaces: ± 0.05 mm
PCB Layout
CCM03-3006
Unless otherwise stated, tolerances are ± 0.10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
31
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 34
CCM03 MK II Hinged Cover
Dimensional Drawings
Hinged Cover CCM03 - 3007 (8 contacts - with stand off 1.90 mm)
en
Note: Coplanarity of soldering surfaces: ± 0.05 mm
PCB Layout
CCM03-3007
Unless otherwise stated, tolerances are ± 0.10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
32
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 35
CCM03 MK II Hinged Cover
Dimensional Drawings
Hinged Cover CCM03-3008 (8 contacts - with locating pegs 1.90 mm)
pen
Note: Coplanarity of soldering surfaces: ± 0.05 mm
PCB Layout
CCM03-3008
Unless otherwise stated, tolerances are ± 0.10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
33
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 36
CCM03 MK II Hinged Cover
Dimensional Drawings
Hinged Cover CCM03-3013 (6 contacts + Card Detect Switch)
Note: Coplanarity of soldering surfaces: ± 0.05 mm
PCB Layout
CCM03-3013
Unless otherwise stated, tolerances are ± 0.10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
34
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 37
CCM03 MK II Fixed Cover
Dimensional Drawings
Fixed cover CCM03-3505 (6 contacts not shown) / CCM03-3504 (8 contacts)
Note: Coplanarity of soldering surfaces: ± 0.05 mm
PCB Layout
CCM03-3504
CCM03-3505
Unless otherwise stated, tolerances are ± 0.10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
35
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 38
CCM03 MK II Hinged Cover
Dimensional Drawings
Hinged Cover CCM03-3512 (6 contacts)
Note: Coplanarity of soldering surfaces: ± 0.05 mm
PCB Layout
CCM03-3512
Unless otherwise stated, tolerances are ± 0.10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
36
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 39
CCM03 MK II Hinged Cover
Dimensional Drawings
Hinged Cover CCM03-3514 (6 contacts - with switch on metal lock)
Note: Coplanarity of soldering surfaces: ± 0.05 mm
PCB Layout
CCM03-3514
Unless otherwise stated, tolerances are ± 0.10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
37
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 40
CCM03 MK II with Auto Lock cover
A new range of CCM03 connectors
have been developed to interface with
Construction
Contacts
Copper alloy
SIM/SAM cards as defined by GSM11-
Contacts finish
Gold alloy inlay (Au/Ag/Pd)
Tin lead (2µ min) Sn/Pb
High temp. thermoplastic, UL94V-0
Stainless steel
11 and ENV1375-1. The connectors are
PC tail plating
available with a hinged metallic cover
Molding
and have been designed to provide an
Cover
easier open/lock function and side card
entry.
Mechanical data
Number of Contacts
Mechanical life
6
Features
10,000 cycles min
10,000 cycles min
0.25 N min / 0.50 N max
Frequency 10 to 500 Hz. Acceleration 50m/s2
Duration 6 hours - amplitude 0.35 mm
(0.014) Max electrical discontinuity 1µs
Durability of inlay
Contact force
Vibration
• Available with 6 cross contacts which
are designed to give a consistently
reliable normal force over the life of
the connector.
• The hinged metallic cover can
automatically lock by pressure.
Electrical data
• Side entry of the card ensures easier
positioning of the card into the
connector.
Insulation resistance
Contact resistance
Signal current rating
Dielectric strength
Card detection switch
Switch contact resistance
Dielectric strength switch
Switch current rating
Maximum switch power
1,000 MΩ min
100 mΩ max
10 µA min / 1 A max
750 Vrms min
Normally open
100 mΩ max
250 Vrms min
1mA min / 10m A max
0.2 VA
• Blade switch version available for
detection card when cover is closed.
• The molding is polarized so that the
cover can only be closed if the card is
correctly inserted.
• Inspection slots allow an electrical test
to be made without opening the cover.
Environmental data
Operating temperature
Soldering temperature
-40°C to +85°C
Temperature/time profile acc. to CECC00802
para. 6.1, Fig. 3 with peak temperature 250°C
General
Damp heat
Salt mist
IEC 512 test number 11c (10 days)
IEC 512 test number 11f (96 hours)
• With tape and reel packaging as
standard, the connectors are designed
to be automatically pick-and-placed.
Ordering Code
Part Number
• The moldings are made from high
temperature thermoplastics suited to
infra-red and convection soldering
processes.
N° of
Contacts
Cover
Card Presence
Switch
Quantity
per reel
CCM03-3517
CCM03-3518
6
6
Hinged
Hinged
No
1300
1300
Yes
• By using an inlay finish in the contact
area the life of the precious metal is
extended by over 10 times that of
standard gold plating.
• Robustly formed printed circuit tails
allow a co-planarity of ±0.05 mm to
be maintained.
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
38
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 41
CCM03 MK II with Auto Lock cover
Dimensional Drawings
Hinged Cover CCM03-3517 (6 contacts)
OPEN
Note: Coplanarity of soldering surfaces: ± 0.05 mm
PCB Layout
CCM03-3517
Unless otherwise stated, tolerances are ± 0.10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
39
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 42
CCM03 MK II with Auto Lock cover
Dimensional Drawings
Hinged Cover CCM03-3518 (6 contacts)
OPEN
Note: Coplanarity of soldering surfaces: ± 0.05 mm
PCB Layout
CCM03-3518
Unless otherwise stated, tolerances are ± 0.10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
40
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 43
CCM03 MK III
Introducing the new CCM03 Series
Construction
SIM/SAM Card Connector from ITT
Cannon Switch Products, featuring
an integrated card detection switch.
This connector provides a competitive
advantage to smart card reader device
manufacturers by minimizing the space
usage on the PCB, and features a side
entry to offer convenient card access
without opening the device. The unique
design of this compact-size connector
makes it ideal for telecommunications,
portable electronics, POS terminals
and similar applications, and meets
GSM 11-11 and EMV specifications.
Insulator
Contacts
Contact finish
PC Tail plating
High temperature thermoplastic UL 94V.0
Copper Alloy
Gold Alloy Inlay (Au / Ag / Pd)
Tin lead (2 µm min) Sn / Pb
Mechanical data
Mechanical life
Precious metal
Contact force
10,000 cycles minimum
5000 cycles minimum (see note 1)
0.25N min / 0.5N max
Electrical data
Insulation resistance
Contact resistance max
Switching current
1000 MΩ min
100 mΩ max
10 µA min / 1 A max
500 Vrms min
Features
Dielectric strength
• Unique card-guiding design.
Environmental data
• 6 spoon-shaped, gold-alloyed
contacts resist wear and improve
connectivity.
Operating temperature
Soldering temperature
-40°C to +85°C
Temperature/time profile acc. to CECC00802
para. 6.1, Fig. 3 with peak temperature
IEC 512 test number 11f (96 hours)
IEC 512 test number 11c (10 days)
Salt mist
Damp heat
• Sealed card detection switches
reduce connectivity problems caused
by dust or moisture.
Note 1: Inlay (precious metal) rating is based on a very abrasive card being used and is
intended to represent worst case.
• Switch design detects and holds the
card while providing firm contact.
Ordering Code
• Unique side entry design offers card
access without opening the device.
Part Number
N° of
Contacts
Cover
Switch Testing
Hole
Ground
Terminal
Quantity
per reel
CCM03-3752 R102
CCM03-3753 R102
CCM03-3754 R102
CCM03-3757 R102
CCM03-3758 R102
6
6
6
6
6
Without chamfer
With chamfer
With chamfer
With chamfer
With chamfer
Yes
No
No
No
No
Yes
Yes
1000
1000
1000
1000
1000
• Stainless steel cover and UL 94VO
high-temperature thermoplastic
insulator.
Yes
No
Yes
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
41
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 44
CCM03 MK III
Dimensional Drawings
CCM03 – 3753 / 3757
CCM03 – 3752 / 3754 / 3758
PCB Layout
CCM03 – 3752 / 3753 / 3754
CCM03 – 3757 / 3758
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
42
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明