E101MD1ZSE [CK-COMPONENTS]

E Series Sealed Miniature Toggle Switches; E系列密封微型拨动开关


型号：	E101MD1ZSE
厂家：	C&K COMPONENTS
描述：	E Series Sealed Miniature Toggle Switches E系列密封微型拨动开关开关拨动开关
文件：	总8页 (文件大小：610K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

E Series

Sealed Miniature Toggle Switches

Features/Benefits

Typical Applications

•

Sealed against solder and cleaning

process contaminants

•

Telecommunications

Instrumentation

•

UL 94V-0 Nylon case and bushing

Multi-positions

Medical equipment

ESD protection available

RoHS compliant models available

Models Available

Specifications

Materials

CONTACT RATING: B contact material: 0.4 VA max. @

CASE & BUSHING: Glass filled nylon 6/6, flame retardant, heat

stabilized (UL 94V-0). F1 conductive bushing option is

impregnated with carbon fibers.

20 V AC or DC max. Q contact material: E1XX & E2XX

MODELS: 7.5 AMPS @ 125 V AC or 28 V DC;

3 AMPS @ 250 V AC. E3XX MODELS: 5 AMPS @

125 V AC or 28 V DC; 2 AMPS @ 250 V AC. See page

F-25 for additional ratings.

ACTUATOR: Brass, chrome plated with internal o-ring seal standard.

SWITCH SUPPORT: Brass or steel, matte-tin plated.

SWITCH SUPPORT RETAINER: Stainless steel.

ELECTRICAL LIFE: E1XX and E2XX models: 40,000 make-and-break

cycles at full load. E3XX models: 30,000 cycles.

CONTACTS & TERMINALS: B contact material: Copper alloy,

with gold plate over nickel plate. Q contact material: Copper alloy,

silver plated. See page F-29 for additional contact materials.

CONTACT RESISTANCE: Below 10 mΩ typ. initial @

2-4 V DC, 100 mA, for both silver and gold plated contacts.

TERMINAL SEAL: Epoxy.

INSULATION RESISTANCE: 10 Ω min.

HARDWARE: Nut & Locking ring: Brass, nickel plated.

Lockwasher: Steel, nickel plated.

ELECTROSTATIC DISCHARGE (ESD) OPTION: F1 conductive

bushing only. Dissipates up to 20,000 V DC from actuator

to ground.

NOTE: Any models supplied with P, S, R, Q, B or G contact material are RoHS compliant

and compatible.

DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.

OPERATING TEMPERATURE: –30ºC to 85ºC.

NOTE: Specifications and materials listed above are for switches with standard options.

For information on specific and custom switches, consult Customer Service Center.

SOLDERABILITY: Per MIL-STD-202F method 208D, or

EIA RS-186E method 9 (1 hour steam aging).

DEGREE OF PROTECTION: IP57; Protection against harmful dust

deposit, full-scale voltage protection, temporary immersion.

Build-A-Switch

To order, simply select desired option from each category and place in the appropriate box. Available options are shown and

described on pages F–18 thru F–24. For additional options not shown in catalog, consult our Customer Service Center. All

models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods.

Switch Function

E101 SP, On-None-On

E103 SP, On-Off-On

Actuator

M .300" high

.500" high

E105 SP, Mom.-Off-Mom.

E107 SP, On-Off-Mom.

E108 SP, On-None-Mom.

E201 DP, On-None-On

E203 DP, On-Off-On

E205 DP, Mom.-Off-Mom.

E207 DP, On-Off-Mom.

E208 DP, On-None-Mom.

E211 DP, On-On-On

L3 Plastic, .940" high

Bushing

D1 .250" high

F1 Conductive,

.250" high*

Terminations

Right angle, PC thru-hole

Contact Material

AV2 Vertical right angle, PC thru-hole

Gold

Gold, matte-tin

Silver

Silver, matte-tin

Gold over silver

Gold over silver, matte-tin

D9 .280" high

PC Thru-hole

Threaded, .350" high V3 .460" high, V-bracket

Solder lug

E213 DP, On-On-Mom.

E215 DP, Mom.-On-Mom.

E301 3P, On-None-On

A3 Right angle, PC thru-hole

AV3 Vertical right angle, PC thru-hole

V6 .460" high, V-bracket

V9 1.150" high, V-bracket

V31 .460" high, snap-in V-bracket

V61 .460" high, snap-in V-bracket

Seal

Epoxy

* F1 available with SP and DP

versions only, please see

page F-19

.750" long, wire wrap

Z3 Quick connect

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ck-components.com

F–17

E Series

Sealed Miniature Toggle Switches

SWITCH FUNCTION

CONNECTED TERMINALS

POS. 2

POS. 1

POS. 2

POS. 3

POS. 1

POS. 3

NO.

POLES

C&K marking on opposite side

N/A

MODEL NO.

E101

SCHEMATIC

NONE

OFF

2-3

2-1

E103

E105

MOM.

OFF

MOM.

OPEN

N/A

E107

OFF

SPDT

E108

NONE

SPDT

Terminal Numbers

For Reference Only

Part number shown: E101SD1CBE

E201

NONE

OFF

NONE

2-3,5-6

N/A

OPEN

N/A

2-1,5-4

E203

MOM.

E205

MOM.

E207

E208

E211 **

E213**

E215**

MOM.

2-3,5-4

DPDT

MOM.

DPDT

Terminal Numbers

For Reference Only

Part number shown: E201SD1CBE

MOM. = Momentary

** Wiring for 3-way switch, see Section N.

All models

with all options when ordered with G,R, Q or S contact material except with F1 conductive bushing.

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ck-components.com

F–18

E Series

Sealed Miniature Toggle Switches

SWITCH FUNCTION

CONNECTED TERMINALS

POS. 1

POS. 2

POS. 3

POS. 1

POS. 2

POS. 3

NO.

POLES

MODEL

NO.

C&K marking on opposite side

SCHEMATIC

NONE

2-3,5-6,8-9

N/A

2-1,5-4,8-7

E301

3PDT

Terminal Nos.

For Reference Only

Part number shown: E301SD1CBE

MOM. = Momentary

** Wiring for 3-way switch, see Section N.

All models

with all options when ordered with G, R, Q or S contact material except with F1 conductive bushing.

ACTUATOR COLOR

ACTUATOR

.300" HIGH

.500" HIGH

L3 PLASTIC, .940" HIGH

OPTION

CODE

Gloss plastic

Chrome finish

L3 ACTUATOR COLOR

BLACK

Other colors available, consult Customer

Service Center. No color choice required

for S & M actuators.

Standard when ordered with

A, A3, AV2, AV3, V2-V61 terminations.

Finish: Chrome.

Standard when ordered with

C, Z, Z3, W & W4 terminations.

Finish: Chrome

* Actuators shown with standard D1 bushing. Subtract .030 (0,76) for D9 bushing. Subtract .100 (2,54) for Y bushing.

BUSHING

D1 .250" HIGH, UNTHREADED

D9 .280" HIGH, UNTHREADED

THREADED, INSULATED, .350" HIGH

WITH KEYWAY

F1 ESD CONDUCTIVE BUSHING,

.250" HIGH, UNTHREADED

F1 bushing is not

UL/CSA approved

1/4-40 UNS-2A

PANEL MOUNTING

ESD protection depends on proper grounding of switch

support bracket. F1 conductive bushing option is

impregnated with carbon fibers; dissipates electrostatic

discharge (ESD) up to 20,000 V from actuator to ground.

E3XX models not available with D9 bushing.

Available only with C, Z, Z3, & W terminations.

Available for 1&2 pole only.

Hardware: One dress nut part number 299D01201,

one hex nut part number 540400201 and lockwasher

part number 700303202 supplied standard.

Will withstand 4 in.-lbs. of torque with no distortion.

NOTE: Internal o-ring actuator seal standard for

all bushing options.

Available with M & S actuator options and A, A3, AV2,

AV3, V3-V61 termination options.

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ck-components.com

F–19

E Series

Sealed Miniature Toggle Switches

TERMINATIONS

SOLDER LUG

PC THRU-HOLE

PC MOUNTING

Not available with F1 conductive bushing

or P, R or S contact material.

SPDT thru 3PDT

Not available with F1 conductive bushing.

Z3 QUICK CONNECT

Not available with F1 conductive bushing or P, R

or S contact material. Mating quick connector

available; order part number 530100000, page F-26.

SPDT thru 3PDT

RIGHT ANGLE, PC THRU-HOLE

Actuator Shown In Pos. 1

SECTION A-A

E101MD1ABE

Horizontal Actuation

SPDT

Terminal Nos. For Reference Only

A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE

PC MOUNTING

Not available with Y bushing.

Terminal bend radii and lead-in manufacturing option.

RIGHT ANGLE, PC THRU-HOLE

Actuator Shown In Pos. 1

SECTION A-A

E201MD1ABE

Terminal Nos. For Reference Only

A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE

Horizontal Actuation

PC MOUNTING

DPDT

Not available with Y bushing.

Terminal bend radii and lead-in manufacturing option.

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ck-components.com

F–20

E Series

Sealed Miniature Toggle Switches

TERMINATIONS

RIGHT ANGLE, PC THRU-HOLE

PC MOUNTING

E301MD1ABE

Horizontal Actuation

Actuator Shown In Pos. 1

SECTION A-A

3PDT

Terminal Nos. For Reference Only

Not available with D9 & Y bushings.

Terminal bend radii and lead-in manufacturing option.

AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,

.150" PITCH

E101MD1AV2BE

Vertical Actuation

Actuator Shown In Pos. 1

SECTION A-A

SPDT

PC MOUNTING

AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,

.150" PITCH

Not available with Y bushing.

Terminal bend radii and lead-in manufacturing option.

AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,

.150" PITCH

E201MD1AV2BE

SECTION A-A

Vertical Actuation

Actuator Shown In Pos. 1

PC MOUNTING

DPDT

A3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,

.150" PITCH

Not available with Y bushing.

Terminal bend radii and lead-in manufacturing option.

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ck-components.com

F–21

E Series

Sealed Miniature Toggle Switches

TERMINATIONS

AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,

.150" PITCH

E301MD1AV2BE

Vertical Actuation

3PDT

SECTION A-A

Actuator Shown In Pos. 1

PC MOUNTING

AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE

.150" PITCH

Not available with D9 & Y bushings.

Terminal bend radii and lead-in manufacturing option.

V6 VERTICAL MOUNT, V-BRACKET

V61 VERTICAL MOUNT, V-BRACKET, SNAP-IN

PC MOUNTING

E101MD1__BE

SPDT

OPTION

CODE

DIM ‘A’

.460 (11,68)

SNAP-IN

V6, V61

Actuator Shown In Pos. 1

Not available with Y bushing.

V6 VERTICAL MOUNT, V-BRACKET

PC MOUNTING

V61 VERTICAL MOUNT, V-BRACKET, SNAP-IN

E201MD1__BE

DPDT

OPTION

CODE

SNAP-IN

DIM ‘A’

.460 (11,68)

V6, V61

Actuator Shown In Pos. 1

Not available with Y bushing.

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ck-components.com

F–22

E Series

Sealed Miniature Toggle Switches

TERMINATIONS

V3, V9 VERTICAL MOUNT, V-BRACKET

PC MOUNTING

V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN

OPTION

CODE

DIM ‘A’

SNAP-IN

V3, V31

.460 (11,68)

E101MD1__BE

1.150 (29,21)

SPDT

Actuator Shown In Pos. 1

Not available with Y bushing.

V3, V9 VERTICAL MOUNT, V-BRACKET

PC MOUNTING

V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN

OPTION

CODE

DIM ‘A’

SNAP-IN

V3, V31

.460 (11,68)

E201MD1__BE

1.150 (29,21)

DPDT

Actuator Shown In Pos. 1

Not available with Y bushing.

V9 VERTICAL MOUNT, V-BRACKET

PC MOUNTING

OPTION

CODE

DIM ‘A’

1.150 (29,21)

E301MD1__BE

SNAP-IN

3PDT

Actuator Shown In Pos. 1

Not available with D9 & Y bushings.

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ck-components.com

F–23

E Series

Sealed Miniature Toggle Switches

CONTACT MATERIAL

OPTION

CODE

CONTACT

MATERIAL

TERMINAL

PLATING

RATINGS

GOLD

LOW LEVEL/

DRY CIRCUIT

GOLD

0.4 VA MAX. @ 20 V AC OR DC MAX.

MATTE-TIN

SILVER

E1XX & E2XX MODELS: 7.5 AMPS @ 125 V AC OR 28 V DC;

3 AMPS @ 250 V AC.

E3XX MODELS: 5 AMPS @ 125 V AC OR 28 V DC; 2 AMPS @ 250 V AC.

4,5

SILVER

POWER

MATTE-TIN

E1XX AND E2XX MODELS: 0.4 VA MAX @20 V AC OR DC MAX. OR

7.5 AMPS @125 V AC OR 28 V DC; 3 AMPS @ 250 V AC.

DC E3XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 5 AMPS @

125 V AC OR 28 V DC; 2 AMPS @ 250 V AC.

GOLD

LOW LEVEL/DRY

GOLD OVER

2,3

CIRCUIT OR POWER

SILVER

MATTE-TIN

* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.

NOTE: Any models supplied with P, S, R, Q, B or G contact material are RoHS compliant.

CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.

END CONTACTS: Coin silver, with gold plate over nickel plate.

All models

with all options when ordered with S, R, G, or Q contact material except

with F1 conductive bushing.

CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate

over nickel plate.

B contact material standard with all terminations.

P, S & R contact materials not available with Z & Z3 terminations.

END CONTACTS: Coin silver, silver plated.

CENTER CONTACT & ALL TERMINALS: Copper alloy, with gold flash over silver

plate. Or copper alloy, silver plated.

TERMINALS: Copper alloy, with matte-tin over nickel plate.

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ck-components.com

F–24

E101MD1ZSE [CK-COMPONENTS]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E