ET01SD1V31SE [CK-COMPONENTS]

Sealed Subminiature Toggle Switches; 密封微型拨动开关


型号：	ET01SD1V31SE
厂家：	C&K COMPONENTS
描述：	Sealed Subminiature Toggle Switches 密封微型拨动开关开关拨动开关
文件：	总7页 (文件大小：483K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

ET Series

Sealed Subminiature Toggle Switches

Features/Benefits

Typical Applications

•

Sealed against solder and cleaning

process contaminants

•

Hand-held telecommunications

Instrumentation

•

ESD protection available

Medical equipment

Thru-hole and surface mount models

Compact size and small footprint

save PCB space

•

RoHS compliant models available

Models Available

Specifications

Materials

CONTACT RATING: B contact material: 0.4 VA max. @

20 V AC or DC max. See page F-35 for additional ratings.

CASE & BUSHING: Glass filled nylon 6/6, flame retardant, heat

stabilized (UL 94V-0) or glass filled 4/6 nylon, flame retardant, heat

stabilized (UL 94V-0). F1 conductive bushing option is impregnated

with carbon fibers.

ELECTRICAL LIFE: ETX1 models: 60,000 make-and-break cycles at

full load. All other models: 30,000 cycles.

ACTUATOR: M3 & S3 anti-static actuator: Nylon 4/6, black standard

(UL 94V-0). All other actuators: Brass, chrome plated. Internal

o-ring seal standard with all actuators.

CONTACT RESISTANCE: Below 20 m Ω typ. initial @ 2-4

V DC, 100 mA, for both silver and gold plated contacts.

INSULATION RESISTANCE: 10 Ω min.

SWITCH SUPPORT: Brass, tin plated.

ELECTROSTATIC DISCHARGE (ESD) RESISTANT OPTION:

M3 & S3 insulating actuator only: 9,000 V DC min. @ sea level,

actuator to terminals. F1 conductive bushing only: Dissipates

up to 20,000 V DC from actuator to ground. M3 & S3 actuator

and F1 bushing options are not recommended for use together.

CONTACTS & TERMINALS: B contact material: Copper alloy,

with gold plate over nickel plate. Q contact material: Copper

alloy, silver plated. See F-35 for additional contact materials.

TERMINAL SEAL: Epoxy.

DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.

OPERATING TEMPERATURE: –30ºC to 85ºC.

NOTE: Any models supplied with Q, B, G, P or R contact material are RoHS compliant

and compatible.

SOLDERABILITY: Per MIL-STD-202F method 208D, or

EIA RS-186E method 9 (1 hour steam aging).

NOTE: Specifications and materials listed above are for switches with standard options.

For information on specific and custom switches, consult Customer Service Center.

DEGREE OF PROTECTION: IP57; Protection against harmful dust

deposit, full-scale voltage protection, temporary immersion.

PACKAGING: Surface mount switches are shipped in tape and reel

packaging, see page F-31 for drawings and reel information.

Build-A-Switch

To order, simply select desired option from each category and place in the appropriate box. Available options are shown and

described on pages F–26 thru F–31. For additional options not shown in catalog, consult our Customer Service Center. All

models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods.

Switch Function

Actuator

ET01 SP, On-None-On

ET02 SPST, Off-None-On

ET03 SP, On-Off-On

ET05 SP, Mom.-Off-Mom.

ET07 SP, On-Off-Mom.

ET08 SP, On-None-Mom.

ET21 DP, On-None-On

ET23 DP, On-Off-On

.240" high

Bushing

M3 Plastic, anti-static,

D1 .177" High, Unthreaded

F1 .177" high, unthreaded, ESD conductive

.240" high

.400" high

.320" high

Terminations

Right angle, PC thru-hole

AV Vertical right angle, PC thru-hole

PC Thru-hole

S1 .540" high

ET24 DP, On-On-On

SA Right angle, surface mount

SA1 Right angle, surface mount rear-facing

V3 Vertical mount, V-bracket

AV3 Vertical right angle, snap-in, PC thru-hole

V31 Vertical mount, V-bracket, snap-in

ET25 DP, Mom.-Off-Mom.

ET27 DP, On-Off-Mom.

ET28 DP, On-None-Mom.

Contact Material

Gold

Gold, matte tin

Silver

Silver/matte-tin

Gold over silver

Gold over silver,

matte-tin

Wire wrap

Seal

Epoxy

Plastic Actuator Color

NONE No actuator color

Black

White

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ck-components.com

F–25

ET Series

Sealed Subminiature Toggle Switches

SWITCH FUNCTION

CONNECTED TERMINALS

POS. 2

POS. 1

POS. 2

POS. 3

POS. 1

POS. 3

NO.

POLES

MODEL

NO.

C&K marking on opposite side

N/A

SCHEMATIC

ET01

NONE

OFF

2-3

2-1

ET03

ET05

ET07

ET08

ET02

MOM.

OFF

MOM.

OPEN

OFF

NONE

2-3

N/A

2-1

3-1

SPDT

SPST

OFF

OPEN

SPDT

Terminal Nos.

For Reference Only

Part number shown: ET01MD1CBE

ET02 Models: Omit terminal 2

ET21

ET23

ET25

ET27

ET28

ET24**

NONE

OFF

2-3,5-6

N/A

2-1,5-4

MOM.

OFF

MOM.

OPEN

OFF

NONE

2-3,5-6

N/A

2-1,5-4

DPDT

2-3,5-4

DPDT

Terminal Nos.

For Reference Only

Part number shown: ET21MD1CBE

MOM. = Momentary

** Wiring for 3-way switch, see Section N.

All models

with all options (except M3 actuator) when ordered with G, L, R or Q contact material except

with F1 conductive bushing.

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ck-components.com

F–26

ET Series

Sealed Subminiature Toggle Switches

ACTUATOR COLOR

ACTUATOR

.240" HIGH

M3 PLASTIC, ANTISTATIC,

.400" HIGH

.320" HIGH

.240" HIGH

Standard with A, AV, V3 & V31 terminations.

Material: Nylon 4/6 (UL 94V-0), black standard.

Static resistance: 9,000 V DC min. @ sea level,

actuator to terminals. Not available with F1

conductive bushing option. Not UL approved.

Standard with C or W terminations.

S1 .540" HIGH

OPTION

CODE

PLASTIC

ACTUATOR COLOR

BLACK (M3 & S3 only)

WHITE (M3 & S3 only)

(NONE)

NOTE: All actuators have chrome finish (except M3 & S3 ).

BUSHING

D1 .177" HIGH, UNTHREADED

F1 ESD, CONDUCTIVE BUSHING

UNTHREADED, .177" HIGH

F1 bushing is not UL/CSA approved

NOTE: ESD protection depends on proper grounding of switch support bracket. F1 conductive bushing option is

impregnated with carbon fibers; dissipates electrostatic discharge (ESD) up to 20,000 V from actuator to ground.

Available with all metal actuator options and A, AV, AV3, V3 and V31 termination options only.

Internal actuator o-ring seal standard.

TERMINATIONS

PC THRU-HOLE

WIRE WRAP

PC MOUNTING

ET02 – omit center hole.

Not available with F1 conductive bushing.

SP and DP

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ck-components.com

F–27

ET Series

Sealed Subminiature Toggle Switches

TERMINATIONS

RIGHT ANGLE, PC THRU-HOLE

PC MOUNTING

ET01MD1ABE

Horizontal Actuation

Actuator Shown In Pos. 1

SPDT

Not available with ET02 model.

RIGHT ANGLE, PC THRU-HOLE

PC MOUNTING

ET21MD1ABE

Horizontal Actuation

DPDT

Actuator Shown In Pos. 1

AV VERTICAL RIGHT ANGLE, PC THRU-HOLE

PC MOUNTING

ET01MD1AVBE

Vertical Actuation

Actuator Shown In Pos. 1

SPDT

ET02 - omit terminal 2.

NOTE: Terminal bend radii and lead-in manufacturing option.

AV VERTICAL RIGHT ANGLE, PC THRU-HOLE

PC MOUNTING

ET21MD1AVBE

Vertical Actuation

Actuator Shown In Pos. 1

DPDT

NOTE: Terminal bend radii and lead-in manufacturing option.

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ck-components.com

F–28

ET Series

Sealed Subminiature Toggle Switches

TERMINATIONS

AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE

PC MOUNTING

ET01SD1AV2BE

Vertical Actuation

SPDT

Actuator Shown In Pos. 1

SA RIGHT ANGLE, SURFACE MOUNT

PC MOUNTING

ET01M3D1SAPE

Horizontal Actuation

SPDT Only

Actuator Shown

In Pos. 1

Not available with S and S1 actuators. Standard with tape & reel packaging, See page F-31.

SA1 RIGHT ANGLE, SURFACE MOUNT

.276

(7,0)

ø.099

(2,51Ø)

.041

.272

(1,04)

(6,90)

.071 TYP.

(1,80)

ø.181

(4,60)

.059

(1,50)

.403

(10,24)

(1,50)

.171

(4,35)

.354

(9,00)

.403

(10,24)

EPOXY SEAL

.079 TYP.

(2,0)

.032 TYP.

(0,80)

ET01M3D1SA1BE

Horizontal Actuation

SPDT Only

.100

(2,54)

.051

(1,30)

.121

(3,07)

.020 TYP

(0,51)

.200

(5,08)

Not available in ET02 .

Actuators M and M3, bushing D1, contact material B.

Standard with tape and reel packaging-see page F-31

.217

(5,51)

.234

(5,94)

V3 VERTICAL MOUNT, V-BRACKET

V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN

PC MOUNTING

ET02 Models: Omit center hole.

V31 Snap-In

ET01MD1V3BE

SPDT

Actuator Shown In Pos. 1

ET02 Models: Omit terminal 2

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ck-components.com

F–29

ET Series

Sealed Subminiature Toggle Switches

TERMINATIONS

V3 VERTICAL MOUNT, V-BRACKET

PC MOUNTING

ET21MD1V3BE

DPDT

Actuator Shown In Pos. 1

CONTACT MATERIAL

OPTION

CODE

CONTACT

MATERIAL

TERMINAL

PLATING

RATINGS

GOLD

0.4 VA MAX. @ 20 V AC OR DC MAX.

LOW LEVEL/DRY CIRCUIT

POWER

GOLD

MATTE-TIN

ETX1 MODELS:

3 AMPS @ 120 V AC OR 28 V DC

SILVER

4,5

SILVER

ALL OTHER MODELS:

2 AMPS @ 120 V AC OR 28 V DC

MATTE-TIN

ETX1 MODELS:

0.4 VA MAX. @ 20 V AC OR DC MAX. OR 3 AMPS @ 120 V

AC OR 28 V DC

ALL OTHER MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX.

OR 2 AMPS @ 120 V AC OR 28 V DC

GOLD

LOW LEVEL/DRY

2,3

GOLD OVER SILVER

CIRCUIT OR POWER

MATTE-TIN

* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.

NOTE: Any models supplied with Q, B , G, P or R contact material are RoHS compliant.

CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.

END CONTACTS: Coin silver, with gold plate over nickel plate.

CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate over nickel plate.

END CONTACTS: Coin silver, silver plated.

All models

with all options (except M3 actuator)

when ordered with G, L, R or Q contact material except with F1 conductive bushing.

CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.

TERMINALS: Copper alloy, with matte tin over nickel plate.

SEAL

EPOXY SEAL

AVAILABLE HARDWARE

Cap

.338

(8,59)

PART NO.

706201000 WHITE

706202000 BLACK

706203000 RED

Material: Vinyl

Finish: Matte

NOTE: Other colors available,

consult Customer Service Center.

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ck-components.com

F–30

ET Series

Sealed Subminiature Toggle Switches

TAPE & REEL

For part number ET01M3D1SAKE

REEL INFORMATION

OUTSIDE DIAMETER

PILOT HOLE

13.00 (330,0)

.512 (13,0)

600

QUANTITY PER REEL

For part number ET01M3D1SA1BE

0.630

(16,00)

0.157

(4,0)

ø 0.059

(1,50)

0.297

(7,55)

0.079

(2,0)

0.069

(1,75)

0.014

(0,35)

REEL INFORMATION

OUTSIDE DIAMETER

PILOT HOLE

13.00 (330,0)

.795 (20,20)

500

0.795

(20,2)

QUANTITY PER REEL

1.732

(44,0)

0.996

(25,30)

FEED DIRECTION

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ck-components.com

F–31

ET01SD1V31SE [CK-COMPONENTS]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E